Related
Hi all!
Today I observed a rainbow blur on my TG01 upper display, it's seems like a liquid ,but it's under the surface and I can't clean it. It's like the crystal liquid it's came out somewhere or somehow.
It's could be a fissure or it's something else?
If it is, how it's this possible, because I treathed this phone like a jewel?
What do you think ,what it is.....?
I uploaded two photos about this.
What should I do?
Sorry for my english.
Thank you for answears.
do you have a screen protector on the screen? if so remove it and see if it disapears
jutley said:
do you have a screen protector on the screen? if so remove it and see if it disapears
Click to expand...
Click to collapse
There is no Screen protector uplied by me, it's in same shape like out of the box, only that, this movement was 2 months ago (out of the box)
I had the same with my first TG, that because you put it in your pocket without big protection.
This big screen don't like a "hold pressure"
PHOTO= http://nsa09.casimages.com/img/2009/09/30/090930040951125085.jpg
Nothing to do for repair.
Sorry for you
LeTo08 said:
I had the same with my first TG, that because you put it in your pocket without big protection.
This big screen don't like a "hold pressure"
PHOTO= http://nsa09.casimages.com/img/2009/09/30/090930040951125085.jpg
Nothing to do for repair.
Sorry for you
Click to expand...
Click to collapse
That's mean that it can't be returned or changed in warranty at Orange?
How do you managed that?
pitagorasz said:
That's mean that it can't be returned or changed in warranty at Orange?
How do you managed that?
Click to expand...
Click to collapse
I've seen in a Spanish forum that people with the same issue have obtained a new one from the Spanish dealer (telefonica) under guarantee..
Good luck
Pere said:
I've seen in a Spanish forum that people with the same issue have obtained a new one from the Spanish dealer (telefonica) under guarantee..
Good luck
Click to expand...
Click to collapse
Thank's , I will give it a try, and keep you inform about the situation.
my touch its dead
So I started testing.
the problem its touch screen.
display its ok!
touch screen is on a plastic surface.
Initially there was very little distance between the two
because of adhesive tape on the plastic (touch screen)
after a while they are to close, and then see those refraction,
the rainbow.
darckreign1984 said:
So I started testing.
the problem its touch screen.
display its ok!
touch screen is on a plastic surface.
Initially there was very little distance between the two
because of adhesive tape on the plastic (touch screen)
after a while they are to close, and then see those refraction,
the rainbow.
[/URL]
Click to expand...
Click to collapse
Thank's It's very good information, this way we know that rainbowing effect it's caused by the construction of the phone and can happen with anybody, so in this cause Orange (in my case) must replace the phone in guarantee...
I will keep you guys in touch.
Unless I'm very much mistaken this rainbow effect is harmless, because you can't see it when the backlight is on, and it doesn't affect device operation. It doesn't look as good when the device is turned off, but that's about it.
Or am I mistaken?
paroariax said:
Unless I'm very much mistaken this rainbow effect is harmless, because you can't see it when the backlight is on, and it doesn't affect device operation. It doesn't look as good when the device is turned off, but that's about it.
Or am I mistaken?
Click to expand...
Click to collapse
the rainbow that u see on the screen is called a newton's ring, it happens from pressure applied on the screen, it only happens to resistive touchscreens and not capactive, and if u dont take care of it, it may start to spread, i recommend that you should have used to screen protecter beacuse it usually helps protect this from happening, good luck!
What kind of screen protector would you recommend? Surely any kind of transparent soft case will apply the same kind of pressure to the screen. Or do you mean some kind of hard case that prevents any contact with the screen?
paroariax said:
What kind of screen protector would you recommend? Surely any kind of transparent soft case will apply the same kind of pressure to the screen. Or do you mean some kind of hard case that prevents any contact with the screen?
Click to expand...
Click to collapse
keep ur phone in ur jacket inner pocket , and not ur pants where it gets bent and pressured ... thats wat im doin
souljaboy said:
keep ur phone in ur jacket inner pocket , and not ur pants where it gets bent and pressured ... thats wat im doin
Click to expand...
Click to collapse
Good advice, keep it in mind!
Keeping it in my trousers' pocket costed me a bloody display(no kidding...)!!!
Hi guys
In Poland We have this same problem.
This is a unstick touch layer.
The reason of problem is bad heat dissipation from procesor.
When We use very strong own TG01 the Snapdragon have about 60'C and this type touch display is very susceptible to heat.
This problem is general problem of users TG01.
The cost of new touch display is hmm about 45 Euro.
After about 5 months use the first "oil spots" appear on the display.
When We use with this problem after 1 month have problem with less sensitivity of the screen.
i just saw the same thing with my tg01 today...but it`s a lot bigger...about 3 quarters of the screen but in the center...what should i do?
ps: i keep it in my jacket pocket...and there is no presure on it...i don`t know what could o caused this...
sattodude said:
i just saw the same thing with my tg01 today...but it`s a lot bigger...about 3 quarters of the screen but in the center...what should i do?
ps: i keep it in my jacket pocket...and there is no presure on it...i don`t know what could o caused this...
Click to expand...
Click to collapse
If your still under warranty, contact toshiba
olyloh6696 said:
If your still under warranty, contact toshiba
Click to expand...
Click to collapse
And if not....
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchscreen_Touch_Screen_/360304861826/item
Good luck
Pere said:
And if not....
http://global.ebay.com/Original_Toshiba_TG01_TG_01_Touchscreen_Touch_Screen_/360304861826/item
Good luck
Click to expand...
Click to collapse
Does it void warranty to replace it yourself?
olyloh6696 said:
Does it void warranty to replace it yourself?
Click to expand...
Click to collapse
The full phrase was: AND IF you are NOT still under warranty.....
Hello XDA Community!
I seem to be having a serious issue with my phone and cannot seem to find a solution online, so I am hoping that someone here will be knowledgable enough to assist me!
When I slide my keyboard out on my sk17i, my screen refuses to change orientation or respond to my touches. Having tested this further, it seems that it is the screen itself that will not change, but keys pressed and touches are registered. I have figured out that I can slide the keyboard out about 40% (just over the bottom row of letters) and the screen seems to change orientation to landscape AND responds visually to my touches. Any more than that and it just stops.
I looked online and someone suggested passing a magnet (fridge) over the keyboard. I did that and it worked once for about a minute. After that it returned to this state and there doesn't seem to be anything I can do about it. I have just put in an order for new facias and a new hardware keyboard to repair it as I have had it since the day it was released and some components are getting on a bit.
Does anyone know what the issue is? I only can think of one thing and that is a flex cable issue, but I cannot be sure at all...
I'd appreciate any help that can be given!
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Pixelado said:
At first glance, yes, seems like a flex cable/ribbon issue. You screen will remain frozen when the keyb is completely open because the framebuffer stops receiving signal from the motherboard. It wont take long until your screen shows artifacts or goes completely blank even when the keyb is closed. Your touch digitizer might also be affected by a bad flex cable.
I suggest you replace it as soon as possible, but don't try to do it yourself unless you have experience repairing phones. I tried to do mine and ruined the LCD display, making my repair cost three times as much
PD: magnet over the keyb? never heard of that.
Click to expand...
Click to collapse
Many thanks for that! The flex cable is out of stock right now, so that is quite worrying, I hope it lasts the next month or so! I think I should be okay with repairing it, since I've worked with very small and delicate electronics before in Engineering. Just will have to be super extra careful! Any advice about what to watch out for?
And yup, magnet seemed to work once, I saw it on a very old thread, but that was the only advice given there.
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Pixelado said:
Well, good luck! Be extremely careful with the display though, the original display assembly has unprotected corners and borders on the LCD so it's very easy to break it, especially on the lower side near the softkeys. Replacement parts often come with plastic and/or metallic protectors on them, which help keeping the LCD safe. Guess SE never meant for people to crack the phone open hehe.
again, good luck with that.
Click to expand...
Click to collapse
Aah okay! I guess I shouldn't bother replacing the facia then, don't want to break the screen! Thank you once again!
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
ECGadget said:
Well, all my parts have now arrived, so tonight I'll be attempting this! Hopefully this goes well and fixes the problem!
Click to expand...
Click to collapse
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Pixelado said:
Best of luck to you, mate.
Replacing a flex ribbon/cable on the mini pro is no easy task, requires patience and steady hands when sticking the big square part onto the metallic slider while making sure all of the other components (home button, camera, led and sensors) keep aligned in place. Do it wrong and you're in for an even more tedious mission haha.
PD: here's a crappy pic from when I did mine
Click to expand...
Click to collapse
Thanks for that! I was just struggling to take the motherboard off, and looking at the picture helped me see where I could try to pry it open!
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Pixelado said:
Yeah, the mobo can be a b*tch to take off. Glad I could help. Be sure to tell us how it goes.
Click to expand...
Click to collapse
Well, after a cracked front facia (thanks to the previous repair that I had on it two years ago), and my temperamental lights, my phone works a charm! Replaced the flex cable, motherboard mount and hardware keyboard. Once again, thank you so much for your advice, I have decided to hang around this place much more often!
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Pixelado said:
Repaired two years ago? Wow, your phone is kind of a veteran haha, mine is about to turn 2yo in about two months. Gotta get a birthday cake.
Good to know everything went fine. See you.
Click to expand...
Click to collapse
I've had my phone since two weeks before it was released in 2011 xD
I'm sure your phone will love the cake
Noticed a new glitch with my phone though... the softkey and keyboard lights start to light up when I switch the screen on, but as soon as the screen switches on the lights switch off?
Never heard of such problems. What rom are you on?
I am running a stock gingerbread 2.3.3 rom, just rooted it a year ago. No other changes, apart from shoving CWM onto it for backup/restore
Hey guys, I just saw this post after hours of frustration!, I recently changed my damaged slider mechanism on my sk17i and I had to transfer the ribbon cable from the one mechanism to the other but I glued it with 2mm adhensive that is used for screen, and the problem is when I open the phone it is always on landscape mode, like the phone thinks the keyboard is always out! Before I tried this repair
everything worked perfect
How the phone understands if the keyboard is out or not?
Please tell me what I could have done wrong, I would appreciate your help here!
Sorry for my bad english
Thank you in advance!!!
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Pixelado said:
I've been trying to figure that out myself too, it seems to be some kind of optical sensor. Whatever it is, it just works for me hehe.
Click to expand...
Click to collapse
And you dissasembled it and re-assembled with no problems?
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Welcome to XDA.
Like Pixelado said, it is probably an optical sensor. My advice would be to disassemble the phone again (without unsticking the flex cable though) and make sure everything is back in its correct place. It make just be something is a little out of place, which is very easy to do! Good luck!
r3izor said:
And you dissasembled it and re-assembled with no problems?
Click to expand...
Click to collapse
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Pixelado said:
Yes sir. I have never re-used a flex ribbon though. I removed the broken factory ribbon and stuck a new one in. No problems.
Click to expand...
Click to collapse
Then as long as I dont know where the sensor is in order to find out my mistake, I am afraid my phone will be permanently on landscape :crying:
Thank you for your replies guys!
Hello dear XDA Devs,
Is there a fix for screen ghosting (random touch input) for a ZU? Mine often goes crazy if i have warm hands and come near to my device whith them. Same happens if i breath a little bit on the display.
Water marks are white and the device has Root + Locked bootloader
Thanks and Greedings
Lightbird
Lightbird said:
Hello dear XDA Devs,
Is there a fix for screen ghosting (random touch input) for a ZU? Mine often goes crazy if i have warm hands and come near to my device whith them. Same happens if i breath a little bit on the display.
Water marks are white and the device has Root + Locked bootloader
Thanks and Greedings
Lightbird
Click to expand...
Click to collapse
Firstly try to clean the screen without any stain or greases...
Try to tweak the sensitivity by changing the figure in /system/usr/idc/max1187x_touchscreen_0.idc (touch.filter.level = 5)...
Try to play around to get the best for ur device...
BTW white water marks due to water damage device??
ronald_loulan said:
Firstly try to clean the screen without any stain or greases...
Try to tweak the sensitivity by changing the figure in /system/usr/idc/max1187x_touchscreen_0.idc (touch.filter.level = 5)...
Try to play around to get the best for ur device...
BTW white water marks due to water damage device??
Click to expand...
Click to collapse
This device has no water damage, that's what i wanted to say . Because of touch.filter.level: Sorry that i didn't sayed that i already tryed this whith best results @ 7, which is too high for a pen input, but the device doesn't go crazy that often.
Yesterday i've seen that you can fix this on Nexus 4 by reisolating a cable. If this is the case on ZU i'm gonna send it in for Warranty.
Lightbird said:
This device has no water damage, that's what i wanted to say . Because of touch.filter.level: Sorry that i didn't sayed that i already tryed this whith best results @ 7, which is too high for a pen input, but the device doesn't go crazy that often.
Yesterday i've seen that you can fix this on Nexus 4 by reisolating a cable. If this is the case on ZU i'm gonna send it in for Warranty.
Click to expand...
Click to collapse
Better just send back to Sony...
I'm facing similar problems with my ZU =/
After I've tried to replace a protective skin for my display, the phone started to present ghost touching. I mean, a LOT of ghost touching. As my warranty expired a few months ago, I sent the phone to a private maintenance and now they want to replace the whole screen.
Do you think I'll have to replace the screen or maybe there's a way out of this? Here in Brazil, replacing the screen can be as expansive as buying a new phone (and I must confess that I'm tempted to forget about my Z Ultra and buy a Z2), so if I could fix this in some another way... well, that would be terrific.
Thanks in advance!
garazaber said:
I'm facing similar problems with my ZU =/
After I've tried to replace a protective skin for my display, the phone started to present ghost touching. I mean, a LOT of ghost touching. As my warranty expired a few months ago, I sent the phone to a private maintenance and now they want to replace the whole screen.
Do you think I'll have to replace the screen or maybe there's a way out of this? Here in Brazil, replacing the screen can be as expansive as buying a new phone (and I must confess that I'm tempted to forget about my Z Ultra and buy a Z2), so if I could fix this in some another way... well, that would be terrific.
Thanks in advance!
Click to expand...
Click to collapse
maybe this will help. Its the Fix i found for the Nexus 7
I started to have a lot of that Phantom touches after taking off my aftermarket screen protector. **** was so annoying. I still have the anti shatter film but don't want to mess with that crap so I installed another screen protector and everything is normal again.
It has been 1 month since installing the new screen protector and no ghost touches.
Sent from my C6833 using XDA Free mobile app
Well... I must confess that the idea of installing a new screen protector never occurred to me
I guess this could worth the shot, actually. Anyway, I've ordered a new display (got a really good price... way way cheaper than the official maintenance was charging), so if the new screen protector won't work out, I'll proceed to replace the whole display.
Hello guys, I hope for you expert opinion here. Yesterday I picked up my beloved Note 4 Global version and saw lines all of the screen, and it flickers all the time. It is definitely a hardware issue because the lines can be seen on the boot and in the TWRP. Also if I apply a bit of pressure on the phone on different sides, sometimes you can see the lines changing, ones they diapered for 5 minutes completely. I have dropped it a day before, from my trousers pocket, but it was fine for a while after that...
I bought this phone from www.gearbest.com and I live in Germany. After reading all the reviews about the warranty procedure I decided that I don't want to send it back to gearbest, because in the best case scenario I will get the phone in half a year, in the worst I won't get it at all.
My question is, do you think the fault is in the motherboard or LCD screen itself? I could buy a new LCD for 25 euros and replace it myself.
NiKiToS-04 said:
Hello guys, I hope for you expert opinion here. Yesterday I picked up my beloved Note 4 Global version and saw lines all of the screen, and it flickers all the time. It is definitely a hardware issue because the lines can be seen on the boot and in the TWRP. Also if I apply a bit of pressure on the phone on different sides, sometimes you can see the lines changing, ones they diapered for 5 minutes completely. I have dropped it a day before, from my trousers pocket, but it was fine for a while after that...
I bought this phone from www.gearbest.com and I live in Germany. After reading all the reviews about the warranty procedure I decided that I don't want to send it back to gearbest, because in the best case scenario I will get the phone in half a year, in the worst I won't get it at all.
My question is, do you think the fault is in the motherboard or LCD screen itself? I could buy a new LCD for 25 euros and replace it myself.
Click to expand...
Click to collapse
from the teardown video, the screen removal is not that hard but not sure if you can get the screen for 25 euros tbh. Best of luck~
asusm930 said:
from the teardown video, the screen removal is not that hard but not sure if you can get the screen for 25 euros tbh. Best of luck~
Click to expand...
Click to collapse
I know it's not hard, I've done it to other phones as well. The question is if it's the screen, or the motherboard.
Found a screen here, as far as I know, the 4X screen is compatible with Global version.
https://www.amazon.de/HYYT-Touchscr...30886&sr=8-1&keywords=xiaomi+redmi+note+4+LCD
NiKiToS-04 said:
I know it's not hard, I've done it to other phones as well. The question is if it's the screen, or the motherboard.
Found a screen here, as far as I know, the 4X screen is compatible with Global version.
https://www.amazon.de/HYYT-Touchscr...30886&sr=8-1&keywords=xiaomi+redmi+note+4+LCD
Click to expand...
Click to collapse
yweah ur concern is more on wether its a motherboard problem or screen problem right? gotta be tough buying a phone from china @ your place
asusm930 said:
yweah ur concern is more on wether its a motherboard problem or screen problem right? gotta be tough buying a phone from china @ your place
Click to expand...
Click to collapse
That is correct, I don't want to buy a new LCD to find out that some controller somewhere on the motherboard is dead.
Actually buying the phone was very easy. Having any kind of service is much harder. And you can't buy this phone in Germany. They don't sell them here.
NiKiToS-04 said:
That is correct, I don't want to buy a new LCD to find out that some controller somewhere on the motherboard is dead.
Actually buying the phone was very easy. Having any kind of service is much harder. And you can't buy this phone in Germany. They don't sell them here.
Click to expand...
Click to collapse
Can You Tell how the issue got resolved? Did replacing the LCD Work for You? I have the Same issue....
grc_king said:
Can You Tell how the issue got resolved? Did replacing the LCD Work for You? I have the Same issue....
Click to expand...
Click to collapse
Yeah, replacing the LCD did the trick, except I got my new screen cracked and have to replace it again :cyclops:
Hey guys,
I just received my new Samsung Galaxy s9 Plus and I have realised that my device is faulty. But I really don’t know if I should just let it be, or ask for my device to be exchanged.
So basically on the screen there is two lines which are visible only when the device is turned fully off or when always on display is showing on the phone.
Do you think I’m being to picky?
Do you think the issue wold get worse over time?
Has anyone else had this issue before on the s9 Plus?
Do you think it’s the coating on the phone that is the issue?
Ps the screen is not cracked, does not have any dead pixels etc.
it would be helpful if you could post a couple of photos of the screen so that we can see if there's really an issue or not.
but if it really is a issue, i would bring it back immediately for a exchange especially given how much the phone cost
Ali9009000 said:
Hey guys,
I just received my new Samsung Galaxy s9 Plus and I have realised that my device is faulty. But I really don’t know if I should just let it be, or ask for my device to be exchanged.
So basically on the screen there is two lines which are visible only when the device is turned fully off or when always on display is showing on the phone.
Do you think I’m being to picky?
Do you think the issue wold get worse over time?
Has anyone else had this issue before on the s9 Plus?
Do you think it’s the coating on the phone that is the issue?
Ps the screen is not cracked, does not have any dead pixels etc.
Click to expand...
Click to collapse
Same here. I post one photo of my s9+. Check & confirm.
I've contacted samsung, I will let you know the end result.
Erm, are you sure that isn't the thin tape that runs down the edge of your screen protector!?
Sent from my SM-G965F using Tapatalk
I have the same lines. It's at the very edge of both sides of the screen. It's almost as if you can see the touch layer.
Just a quick update, I spoke to Samsung and they said it’s the first they heard of the problem, currently it’s been escalated to a higher department, I’m going to receive a call back today, I’ll update you with anymore info,
Ps can everyone contact them who are also Having this issue as it will only help with making the case stronger as a whole.
What screen protector are you using? Mine is the bodyguardz glass one.
I don’t have any screen protector on the device. The situation is so stressful, it had to happen to me lol
Chris_c81 said:
Erm, are you sure that isn't the thin tape that runs down the edge of your screen protector!?
Sent from my SM-G965F using Tapatalk
Click to expand...
Click to collapse
After more research and a closer inspection I do believe it is the adhesive at the edge of my screen. I also found pics of other people discussing this issue with zagg cases. This is my first curved screen so I was unaware of how they curved tgsp worked.
Thanks Chris.
Ali9009000 said:
I don’t have any screen protector on the device. The situation is so stressful, it had to happen to me lol
Click to expand...
Click to collapse
I haven't been having much luck myself. Two devices with terrible lens flare and one with black splotches showing on the screen.
Ali9009000 said:
I don’t have any screen protector on the device. The situation is so stressful, it had to happen to me lol
Click to expand...
Click to collapse
You can clearly see a screen protector in the image you posted? What is going on here?
Toss3 said:
You can clearly see a screen protector in the image you posted? What is going on here?
Click to expand...
Click to collapse
What's going on here is that OP hasn't posted any image.
Sharpshooterrr said:
What's going on here is that OP hasn't posted any image.
Click to expand...
Click to collapse
And that's why one shouldn't be posting at 3 am. I'll see myself out.
Toss3 said:
And that's why one shouldn't be posting at 3 am. I'll see myself out.
Click to expand...
Click to collapse
Lol. Happens to the best of us.
Quick update, Samsung was willing to replace the device under warranty, however I decided to cancel my contract and wait for the note 9.
I dropped my phone on a hard surface and now my screen is black. Any suggestions?
rroberge said:
I dropped my phone on a hard surface and now my screen is black. Any suggestions?
Click to expand...
Click to collapse
The oled underneath the digitizer more than likely is broke. Screen replacement is gonna be what your looking for. Might shine a flashlight across the screen and look close for a crack under the digitizer