Related
Hallo,
my english speak is bad bud i have question:
I have HardSPL and how flash any rom to my Wizard?
I must use shell tool or only ROMUpdateUtility with used rom or another software? (Please type step by step)
Thanks for your answer
the step by step instructions are already on the forum, have a quick look with the search button.
i believe you only need the RUU but i suggest doing a search first
Use RUU only, don't ever use ShellTool now!
As long as you don't reverse or remove the "hardSPL' yourself,it remains temporary tricked into CID unlocked,Therefore, always flash any rom straight using RUU,there's no need to use or apply any other utility,but be careful never to flash any rom which includes IPL/SPL in it or even the Official stock Rom,as it also contains IPL/SPL.it'll 'Brick' the phone.
Cheers!
Hi guys,
i flashed my Rapahel to ROMeOS² v1.05 (B-20748.1.4.0).
Now I would like to sell the phone. What Do I have to do to make the (Roms's)phone look like original that the buyer can (in case of guarantee issues) send it back to the german provider o2.
Thnks guys,
duffy6
Download here my dumped o2 Rom, after flashing the Rom flash the Stock-SPL from here.
Regards,
Chris
Hi!
Thx for your answer. I flashed your dumped o2 file. Worked like a charm.
But flashing the the HardSPL I am a little bit confused. the link you posted says:
UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download the stock spl package from this post.
2. also download the original hardspl from the attachments in this post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to black screen), it goes to 100%, reboots, done.
+6. to verify, volume down + reset, see version number on tricolour screen, should now just say 1.90.0000.
that's it.
Click to expand...
Click to collapse
Point 1 to 3 is clear. But I don't understand point 4. What should I copy and overwrite?
Can you please explain that to me?
Thnks!
duffy6
duffy6 said:
Hi!
Thx for your answer. I flashed your dumped o2 file. Worked like a charm.
But flashing the the HardSPL I am a little bit confused. the link you posted says:
UPDATE: STEP BY STEP HOW TO RETURN TO STOCK SPL - FOR WARRANTY REASONS ONLY!
Point 1 to 3 is clear. But I don't understand point 4. What should I copy and overwrite?
Can you please explain that to me?
Thnks!
duffy6
Click to expand...
Click to collapse
You do not need to understand that as it is a bit confusing. Just one thing copy sspl-manual.exe to the phone and run it on the phone using file explorer or something. then just flash any stock spl you need using RUU. It is easy nothing else needed.
Okay, that means I was wrong by FIRST flashing the original ROM?
So this is how I have to do it now:
FIRST copy the sspl-manual.exe to the phone and execute it on the phone
THEN flashing the original ROM
and that's it?
right?
I've been a long time lurker here and I just recently acquired an XV6800 (currently suffering with an i760). I have read the Titan Wiki (as well as countless other pages, and yes, I did search before asking) and I think I may have just made a mistake.
I had a stock 1.04 bootloader on it and following the directions I found here:
http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome
I upgraded to the nueSPL 2.47 package. I used the SD card to do the upgrade. From what I can tell, the bootloader installed just fine. The program ran successfully and when I check my bootloader (camera-power-reset) it shows that 2.47 is installed.
What I neglected to do was read the "IMPORTANT" section first. (I know, I know...) My phone has a version 2.xx (stock) ROM on it, not 3.xx.
Did I just brick my phone, or is there something I should do to try and reverse changing the bootloader? Or, am I fine, and I don't really need to worry about this?
Thanks for all your help in advance,
Dustin
lol no your Phone is OK.. and this goes to ANYONE .. if your Phone boots
(to the bootloader 4 color screen) your Phone is ok .. just need to load
up the correct Radio or OS ROM / custom OS ROM..
ok DustinEarnhardt
to fix your issue .. I take it .. you just unlock your phone and loaded a GPS Radio?
if so all you need is to load a new OS ROM, put your Phone back in bootloader made ..
connect it to the computer .. when you see "USB" on the screen you are ready to load a new OS ROM ..
simple download any custom OS ROM you like then run the ROMUpdateUtility.exe
thats all you need to do.. unless you did not load the correct Radio .. then
you'll need to load up a new radio as well..
BTW the only time a Phone is "trash" is when you can't get in to SPL bootloader mode
BTW you can load a new Radio via Flash or USB ..
I made a little RUU for USB Radio flash .. but its very easy
via an mSD card .. just put the radio file with the name "TITAIMG.NBH"
on your mSD card and plug it in .. you can do the same
for OS ROMs as well..
Thank you for the quick response! This place is great!
To clarify, basically right now, I have a stock ROM and radio, with a 2.47 bootloader. I can get the 4 color bootloader screen no problem, and the phone boots normally to the stock OS ROM and operates.
My next step (again following the guide here: http://wiki.xda-developers.com/index.php?pagename=TitanRecentHome ) is to upgrade the radio ROM to Titan Radio ROM 3.42.02. I'm basing this on the decision to use the dcd 3.2.6 kitchen. It was recommended here: http://wiki.xda-developers.com/index.php?pagename=dcdtitanroms to use that Radio ROM. (Oh and I'm using dcd 3.2.6 because from everything I've read, its the most stable at the current writing.)
Hopefully there are no huge problems with what I'm about to do, but if there is, maybe someone can stop me before I try to do this later tonight.
yp thats about it..
Load up a new Radio .. I like "3.42.50" then load up any OS ROM you like..
DustinEarnhardt said:
Hopefully there are no huge problems with what I'm about to do, but if there is, maybe someone can stop me before I try to do this later tonight.
Click to expand...
Click to collapse
well I have a easier way to load up Radio ROM via USB .. that Howto steps is a bit hard to go by...
but it should work..
also Read my thread: http://forum.xda-developers.com/showthread.php?t=472805
The flashing can now begin (without fear of not being able to return it to stock form)! And for those who need a way to return to stock form, HTC has come through!
http://www.htc.com/us/support/pure-att/downloads/
HTC PURE (AT&T) Original Ship ROM | 02.05.2010
This software is the actual ROM that the HTC PURE (AT&T) shipped with. less
In the event that the device has a fatal error and cannot be recovered by Soft Resetting or Hard Resetting the device, it may be recovered by reloading the original ROM. Please note that during this recovery process, the device will be Hard Reset and anything that is NOT part of the Operating System (contacts, calendar, music, etc) will be permanently deleted; always make a point of backing up your devices data on a regular basis!
Instructions:
1. Download and save the HTC PURE (AT&T) Original Ship ROM to your PC.
2. Power your device off.
3. Connect your device to your PC via the data USB cable.
4. On the device, press and hold the Volume Down and Power Button until you get the bootloader screen (tri-colored).
5. Once it bootloader mode, wait for "serial" which shows at the bottom of the screen to change to "USB".
6. Once USB shows on the device, on your PC double click on the HTC PURE (AT&T) Original Ship ROM to launch the RUU Wizard.
7. Follow all of the RUU Wizard instructions shown on your PC.
8. Once the update is complete, click Finish in the RUU Wizard and the device will reboot.
9. Once the device reboots it will run through the Customization Process; this must be allowed to complete.
10. Once the Customization process is complete, the device is then ready for use.
http://member.america.htc.com/download/RomCode/HTC Pure/HTCPUREATTOriginalShipROM.exe
A BIG THANK YOU to HTC!
will it change spl
for flashing we use hard spl 1.83olineix
will it change back to stock spl after the flash
Good eye dynamius; I've been hoping that this would show up at some point.
Is this with 2.1 manila?
manila 2.1
chikoo said:
Is this with 2.1 manila?
Click to expand...
Click to collapse
Unfortunately this is with manilla 2.1.
Does this mean we should expect to see a new official ROM in the near future though?
mizzikedamosher said:
Does this mean we should expect to see a new official ROM in the near future though?
Click to expand...
Click to collapse
There is already a new leaked rom but needed to a new hspl to flash it.
Cant Download
Hi
I can't download this rom.
I click in the link and it redirect me to another page, and I keep looping.
Now I'm in Costa Rica and maybe I need to be in USA to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
Thanks
blancofran said:
hi
i can't download this rom.
I click in the link and it redirect me to another page, and i keep looping.
Now i'm in costa rica and maybe i need to be in usa to download this file.
Could someone upload the file to megaupload or rapidshare or something similar.
I will appreciate that
thanks
Click to expand...
Click to collapse
MEGAUPLOAD: http://www.megaupload.com/?d=E01IBRNN
opensea said:
There is already a new leaked rom but needed to a new hspl to flash it.
Click to expand...
Click to collapse
Where is this official leaked ROM you speak of for the pure?
Only ROMs I see out is 3rd party cooked ROMs. Not anywhere close to the quality of official ROMs. And only ROMs that I've seen out that makes a huge difference in anything is the ones with Manila 2.5. Which are horrible in the sense that MMS doesn't work on them, because there is no way of opening it unless you do a registry hack and add a cab for it to open in windows messaging client.
finally! i've been looking forward to this
Thanks
Hey. Thank you very much
Hi
Hello How can I change the band to the following:
Network Type : GSM
Band Frequency: GSM (900+1800+UMTS(2100+900)
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
PURE dialer canvas
Great find! Any chance that someone could / has extract(ed) the phone canvas out of this rom to see if it addresses the delay issues associated with the topaz and leo roms?
great find buddy
naplesbill said:
Here is a little FYI for anyone interested. I am not sure why but, loading this rom did not replace the HardSPL. Being curious, I had to find out how I could use the stock SPL in this rom to go back to being completely stock. I am not sure if what I did is correct but it worked for me.
I extracted the spl.nbh and ruu_signed.nbh from the HTC download. I tried just running the spl.nbh by renaming it to TOPAIMG.nbh and copying it to the root of the SD. Everytime it would read the file and try to replace the spl it would fail and go back to the load screen. So, I relocked the spl using the spl relocker 1.33 (? I think that was the version). I then applied the spl.nbh (renamed to TOPAIMG.nbh) and it replaced the SPL with a version 1.78. It then looked like it was stuck at 9%. This is apparently some sort of interim SPL used to load the ruu_signed.nbh. After trying to determine what was going on for a little while I decided to put the ruu_signed.nbh (again renamed to TOPAIMG.nbh) on the SD and see what happens. Well, it loaded the original SPL, Radio and ROM and my Pure was 100% stock again.
I am sure there must be an easier way. Perhaps if I had just relocked the SPL with 1.33 and then ran the update it would have been fine. I just wanted to post this information so people know that you can get it back to 100% stock using this download from HTC.
Click to expand...
Click to collapse
that was a awesome work buddy ..
perhaps someone can re package the relocker with spl found from the download
Sucess
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
So that confirms you have to relock the spl before it will replace the hardspl with the original spl. That is good to know.
relocker replaces the spl to stock spl version 1.33
flashing again flashes the spl to 1.83
dinakar407 said:
Hello Guys .. I successfully restored my at&t pure back to stock state
Stock rom and stock spl
Here is what I did
1. Extract rom from the download and put it in sd card and rename to TOPAIMG.nbh
2. enter the boot loader and install the rom
3. download the relocker and re lock the spl to 1.33
4. Again enter the boot loader and install the same rom again. This time rom , spl , splash screen, radio would be flashed .
Now i have stock rom with spl version 1.83.000
you send back for warranty purposes with out any hassles
Click to expand...
Click to collapse
which rom ? ive downloaded the exe and notcied there were 2 nbh files, just wasnt sure
First of all i`m not a developer i`m a simple user of a HTC HD2 and i need your help guys cuz i`m in panic!!!!!!!!!
The story sounds like this, i installed Android on my phone, then it gave me errors cuz of the old radio. Then i decided to upgrade the radio to 2.15, and i decided to flash back my wm 6,5 to be able to sync it with windows 7 and make the radio update and i downloaded the img from this post http://forum.xda-developers.com/showthread.php?t=681317, i started the loading process and it suddenly stopped saying some errors appeared, not when i start it writes "Software update failed, please try again" red green blue white...
I`m in panic, what should i do!?!!
You have not bricked your HD2, and seeing as you have not posted back here in a several hours you may have solved your problem.
Just go to htc.com and enter the serial number of your HD2 and download the ROM from there then fllash it either by SD or RUU (USB).
helpp
let me tell you the whole thing.
first i had windows 6.5 on my htc hd2 t mobile .
i shifted to android 2.2 through the instructions available at xda forums.then i wanted it to convert to android 2.3 but i couldn't find any way so i planned to downgrade to windows 6.5 n then to android 2.3.
i followed the above old link that i mention in the first post to downgrade to windows 6.5 but wen i loaded the boot-loader it said update rom error.since then i only see the colored screen.i tried many roms but all say the same thing that rom file corrupted.but if i use different leoimg.nbh extracted from the stock rom ,the installation process doesn't starts and keeps on stuck at the o% level
help me out plzz
Re apply hspl which has probably gone, then flash rom over USB.
When I flashed 1.72 trying to restore stock, (yes correct rom) I got software update failed until I used hspl.exe to change spl to 1.xx from 2.08.hspl, dunno why it wouldn't take, but it wouldn't until I changed spl.
ignore this comment if you have a tmous, don't try installing 1.xx spl on a tmous.
re:help
when i try to install hspl it says u must have spl 1.42 but i am having 2.08 on my fone how shud i go to 1.42?
the only thing i can see on my mobile is the bootloader screen
That's hspl1 you are trying, use hspl2
can u give me the link to download HSPL2 .thnx
i wanted to tell that i am running 512 leo rom...
n sorry but can you tell me the whole process step by step..
i em really in an mess
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
samsamuel said:
the link is directly underneath the link where you got hspl form, , in teh hspl thread, post one, at the bottom, there are two links,, get teh bottom one
into bootloader
usb
run hspl2
choose 1.66.0000
run your rom flash from sd. <--- MUST be the correct stock rom for your phone and carrier, not just any stock rom.
Click to expand...
Click to collapse
Did you forget you have HSPL 2 linked in your sig, lol............
T-Macgnolia said:
Did you forget you have HSPL 2 linked in your sig, lol............
Click to expand...
Click to collapse
edit - dunno what my last reply meant, , stoned, tired, yea i had forgot, and i missread your post