Related
Hi, I've upgrade from the Moto (920/925/1000) phones on the 3Aus network and while I've done lots of upgrading on these platforms I'm a NOOB on the Dopod.
I've read the FAQ and searched the forums and the wealth of info makes the Symbion stuff look tiny....so any advice from 3Aus users on what ROM (or other) upgrade is the go would be terrific. I've got the latest official release and updates flashed already from the DopodAsia site but notice that:
1) I don't have the "band" tab
2) the inbuild voice navigation is utterly terrible (at least for on Oz accent)
Thanks
Nathan
nathan im from OZ and have modified my Dopod... but i really insist on reading the wiki first before you make any changes and you are awake of its consequences if anything was to fail...
Thanks - I've read the Wiki and would look at upgrading during the W'End (so I am not rushed). Just wanted to hear some feedback from a "local"!
Nathan
no worries.... i suggest you read this first before you do any changes http://forum.xda-developers.com/showthread.php?t=294012&page=1
mate, I'd look at walshie's sig for some hints
I'm waiting for the x-series in aus to be available before I sign on and get a dopod 838pro as well. So I'm interested in following this thread.
Hi Nathan,
I'm a Three user, based in Melbourne but in Newcastle a fair bit too, and I've flashed my Dopod to the latest HTC AKU3.3 test ROM, including the radio update. Make sure you use the unlocker/superCID first . I'm getting great reception with this latest radio ROM, and the OS is nice and fast too.
You'll have to put the settings for 3Services (thats whats used for the Three website, and email) and the 3MMS settings back in, but its not too hard.
As far as voice recognition, MS Voice Command 1.6 with the fixes from the thread in the "Hermes" forum works fine with an Aussie accent.
Thanks - I've chosen at this stage to stick with ROM Version 1.30.707.4 but flashed SuperCID and upgrade to Radio Version 1.27.00.00 (GER). So far so good!
Good to hear! I'd still reccomend running AKU3.3 test though - its really a great upgrade! I'm a heavy user of mine and its not let me down as often as 1.30.707.4 did.
Out of interest, did you get the reply to the email you sent me? Sometimes Hotmail puts my domain in the junk mail box, just curious to know if it got through OK.
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
with the latest flash your installing, is internal GPS enabled??
jmone said:
2) Do you know what are the "3 Australia Settings" I need to re-enter?
Click to expand...
Click to collapse
(coss post with Aussie3G)
I've got Phone / External Web / SMS working fine, but am having trouble with the MMS setting and e-mail - i've entered the following info for the WAP account manually - any ideas for "Three in Australia"?
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: three.net.au:10021/mmsc
Connection Via: The WAP Network
Sending size limitations: 300kb
Wap Version: WAP 2.0
Thanks
Nathan
OK got the settings going using:
Messaging =========================
MMS ***********************
Server Name: 3MMS
Gateway: 10.176.57.25
Port#: 8799
Server Address: http://mmsc.three.net.au:10021/mmsc
Connection Via: Work
Sending size limitations: 300kb
Wap Version: WAP 2.0
3Mail ********************
Account Type: IMAP4
Incoming Mail: mail.three.net.au
Outgoing Mail: smpt.three.net.au
Domain:
Connection: Work
Connections ========================
3Netaccess******************
Enter a name for the connection: 3Netaccess
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3netaccess
User name:
Password:
Domain:
Advanced (nil)
3services******************
Enter a name for the connection: 3services
Select a modem: Cellular Line (GPRS, 3G)
Access point name: 3services
User name:
Password:
Domain:
Advanced (nil)
Just confirming those are the right settings. Remember you can change the name for the connections to make them easier to recognise - I called 3services Planet 3, and I didn't put the Netaccess connection in at all as I do not use the data packs (nor do I wish to until they get cheaper!).
You don't need to SuperCID/Unlock again; it sticks.
jmone said:
Thanks Kevin, I'm actually re-flashing as we speak as I found that after the SuperSID & Radio upgrade to 1.27 my Dopod "froze" several times today when the screen was off requiring a soft reset.
Couple of Q's:
1) Do I need to re SuperSID after flashing with "RUU_Hermes_HTC_WWE_2.05.255.1_6275_1.34.00.10_108_Test" (is this AKU3.3)?
2) Do you know what are the "3 Australia Settings" I need to re-enter
Thanks
Nathan
PS It was not me on any e-mail!
Click to expand...
Click to collapse
1. It doesnt really matter anymore as we have the SSPL tool which allows up to reflash nbh rom without having to change the CID
2. Sorry dont know them...
chingy213 said:
with the latest flash your installing, is internal GPS enabled??
Click to expand...
Click to collapse
which latest flash?? all shipped rom upgrades for the hermes do not have the GPS enabled... you need to use a Radio ROM from the Trinity....
Does anyone have the 3 settings and optus settings in a cab at all?
Cheers
Hi Friends:
I would like to know how to install & setting the new Arcsoft MMS 5.0.31.7...I have the following files:
- _Alex__Arcsoft_MMS_5.0.31.7.cab
- SettingDll.zip (SettingDll.dll missing from the cab. I have attached the file. Copy to \windows)
- Transport.zip (transport.exe is missing)
and I have the following settings in Alltel MMS:
Server name: Alltel MMSC
Gateway: Delete it, leave blank.
Port #: 8080
Server Address: http://mms-mt.alltel.net/servlets/mms ( note the "-mt" and the ".net" instead of ".com" )
Connect via: Alltel Wireless
WAP2.0
Can you help me?
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
I should note those settings I posted were from Lenny's Forums, I didn't give credit. I know we tried several settings in the DCD's 3.0.4 thread, but I don't know if any worked. I would also like to know if anyone got the newest mms working with Alltel.
TecMan45 said:
Hi Friends:
I would like to know how to install & setting the new Arcsoft MMS 5.0.31.7...I have the following files:
- _Alex__Arcsoft_MMS_5.0.31.7.cab
- SettingDll.zip (SettingDll.dll missing from the cab. I have attached the file. Copy to \windows)
- Transport.zip (transport.exe is missing)
and I have the following settings in Alltel MMS:
Server name: Alltel MMSC
Gateway: Delete it, leave blank.
Port #: 8080
Server Address: http://mms-mt.alltel.net/servlets/mms ( note the "-mt" and the ".net" instead of ".com" )
Connect via: Alltel Wireless
WAP2.0
Can you help me?
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
Click to expand...
Click to collapse
so even though your carrier is Iusacell, you are using alltel's mms server? is that how mms should be set up for your carrier? seeing as how i know nothing about iusacell, my best guess would be that you are not using the right server, as in, not to use alltel's server.
Hi fallingup:
Thanks for your reply...and I don't have installed the new Arcsoft MMS 5.0.31.7 yet....I just want to know your expriencies about it....I know that Arcsoft MMS works with all carriers...but need more info.
Thanks
TecMan
SPRINT HTC MOGUL PPC-6800
ROM version: dcd 3.0.1
Carrier: Iusacell (Mexico)
Radio version: 3.35.04
I've been trying and trying to get 5.0.31.7 working on the Alltel 3.0.4, but I just can't get the settings right. It's frustrating, but I know that there are smarter people than me working on it, so hopefully it'll be worked out soon. Also, I haven't gotten mms to work consistently since I upgraded to to the 3.35 radio. Using Lenny's cab, I can send mms without issue, but I only receive mms sporadically. For instance, I'll test by sending myself an mms and it'll work. Two minutes later I'll send the same pic to myself again, and it never comes through. I estimate that only about 1 in 4 of the mms messages sent to me actually reach me. I seem to be alone in this problem, though, so maybe it's just my phone.
I ended up redoing the whole kitchen again to get it to work. I am on Verizon and when I upgraded it started working out the gate.. It is also worth the time to redo also since its built into the threaded SMS also now..
RevSoft, is there some way to install Arcsoft (and make it functional) w/o having to reflash a whole new ROM? I'm on verizion with the alltel rom and I've downloaded and installed the cab -- but it dumps me to outlook whenever I try and send a photo to somebody...
Hey guys i just bought a mogul on ebay and had it flashed to metro pcs, the internet, and gps work fine, i just cant get it send out mms like many of ur phones can, i dont have sprint picture mail, because i have metro service.
ANY HELP WILL BE GREATLY APPERICATED!!!!!
Did you install Arcsoft? If you did not, you might want to find a copy of it to intall on your phone.
Once you do, follow the directions below as a guideline.
Remove/Uninstall any existing MMS composer you have attempted to setup. Also a good idea to remove any registry keys it may have created that are left behind after the uninstall.
1: Install Arcsoft MMS version 5.0.70.24
2: Open your Messaging and click on the SMS/MMS option.
3: Click on "Menu" and select "MMS Options" then select the "Servers" tab.
4: Add a new server with the following settings:
Server Name: metropcs
Gateway: wap.metropcs.net
Port number: 3128
Server address: http://mms.metropcs.net:3128/mmsc
Connect via: SELECT EITHER THE CONNECTION YOU SETUP ABOVE OR "The internet"
Send limit: 399K
5: Click "Done" and then set the new server as default.
6: Using a Registry Editor edit the following values:
[HKEY_LOCAL_MACHINE\SOFTWARE\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
DELETE KEY -> "X-VzW-MDN"
ADD STRING -> "X-metropcs-MDN"="XXXXXXXXXX" ( Insert your 10 digit phone Number )
ADD STRING -> "X-DEVICE-MIN"="1XXXXXXXXXX" ( Insert your 10 digit phone Number WITH the 1 in front of it )
Hope this helps nobale Metro PCS cousin...8)
*P.S.-- You might also want to find the Titan MMS fix CAB by CRwinger to help keep your MMS working properly. The reason is that when you open PIE it creates a registry key that will stop you from send/recieving MMS. The CAB file will automatically delete that file by pressing the messaging hard button on the top left of your Mogul.
Other alternative is not to use PIE and just use Opera.
PM me if you need any help, I'm with Cricket so we are almost in the same boat. 8)
mougl flashed to metro, mms problems
i'm really not smart when it comes to computers and pda, what is a pie and what is opera?
I'm pretty sure that PIE is something internet explorer. Opera is a mobile web browser. Probably one of the best since you can get youtube
mogul flash to metro, mms problem
ok i've located arcsoft mms 5.0.70.24, which on this forum, one do i download because i see beta and several other versions.
I use 5.0.31.19 myself. Any version after that or a beta is fine really. Its a trial and error of how well the software version you have works like you want it to.
Just DL anyone of them.
*Important--If anything back-up your phone just incase you need to do a hard reset. Use a program called PimBackup...its free.
As paintballinfl said:
PIE=Pocket Internet Explorer
Opera= A new browser for PDA's to view websites as if you are actually at your desktop.
mogul flashed to metro, problem with mms.
thanks, i had downloaded a older version, how do i delete the older program completely? i removed it from my phone but, what's a registry edit? and how do i do that before installing the new arcsoft?
You need to find phmReg Edit and use that program to do your registry edits...its free just google it.
Also if you already have a version of arcsoft installed use the guide to get MMS working for you on Metro PCS. If that version doesn't work for you do the advised below.
*If you want to change the version of arcsoft it is best to start from scratch and hard reset the device. Thats why i suggested you to do a back-up your phone. Also if a hard reset is needed please be careful because it will erase everything on the phone except the SD card.
So it goes like this:
install phmReg Edit-->install Arcsoft-->follow steps in guide
mogul flashed to metro pcs, mms problem.
THANK YOU GUYS... i'm able to send and receive picture and video mail, i just gotta get the titian cab fix or install opera, to keep it up.. what's the best opera version to install?
There are many builds out there but Opera build 2392 is good...seems to make it the default browser instead of PIE.
For example: When clicking on a link in a text message, Opera will open instead of PIE.
The Titan MMS fix by CRwinger I believe you might be able to find on PPCgeeks.
mogul flashed to metropcs, mms problems
Is it the mms cab fix for cricket? because i found that one, it was a choice between that one that the vougue fix. and if i choose the cricket fix will i have to redo all the setting back to metropcs? any link to the titian mms fix cab would be appreciated greatly!!! THANKS
hey where can i find the right one Install Arcsoft MMS version 5.0.70.24 for metro because it has different type of them like verzion and alltell etc.. which one is the best.....please help me
I know, everyone wants to tell me to search for it. But honestly, have you tried to "search" for it? When I go looking, I find everything but a decisive answer on how to do what I would like. SO if you'll bear with this LONG email. You'd not only be helping me, but others possibly.
Here's what I've got (I'm not all sure what you need from me so there's extra info from other screens on here - exception is I'm not posting my IMEI number)
The ROM on the phone is the new manufacturers ROM update that was made available 9/11/2009.
HTC Hero (the actual phone, not just the ROM)
Firmware: v1.5
Kernel version: 2.6.27-8dd6dee
Build number: 2.73.405.5 146733
Software version: 1.0.0.A6288
HERO CVT SHIP S-ON
HBoot 1.76.007 (HERO10000)
MicroP-010f
Touch Panel-syn0104
RADIO-6.35.06.18
I've "rooted" my phone (using "Recovery-RA-HERO-v1.2.2.img" and "flashrec-20090815.apk" - as I got told I couldn't install "flashrec-1.1.2-20090909.apk" by the phone when I tried to install it), and also used the SDK adb to push and allow permissons for su and superuser.apk.
The instructions (and videos) on theunlockr.com seemed to help me with that, and I'm a total NOOB. As now that's where I'm at. Not much further.
So what I'm looking for is how to get my apps to run of my MicroSDCard in the phone?
I've tried apps2sd and apps2sd 2 and everytimg I load apps2sd 2 it tells me that my partition on the card isn't corrent and asks me if I want to have it do it for me. Well, to continue I have to choose "Yes" and set sizes... it says "DONE" and I click on reboot now.. Nothing happens. I've left it sit on that screen for up to two hours... nothing happens. I have to hard reset my phone to get back to HOME.
OK I've seen instructions on using Paragon Partition Magic to partition my memory card. I've done that (can do that again - 4G card - 3GB fat32, 900MB Ext2, 100MB Swap - nothing seems to get recognized no matter how I grow or shrink these as apps2sd 2 still tells me it's invalid and wants to repartion now the "remaining 3GB of Fat32 space")
Why don't I try a custom ROM? Well when I did that... my SMS quick working all together. Since that's a "pretty nice feature" to have... I stepped back and went to the manufacturers ROM update that was just released. It seemed I got all the "speed" of the recent Madacco ROM and my SMS worked.
Now that 123MB space reserved for applications on a "raw" manufacuters build phone. Ya... not enough. I want to run and store my apps on my SD Card, I load a lot of games and other stuff, so by the time I'm done I've only got maybe 5MB of the 123MB left - at that point the web and everything slows WAY down.
I need some instructions on how to do this (run apps from SD Card rather than from phone) based on the configuration I currently have (or based on a ROM out there specifically for the HERO that will allow all my other features to work as well as run apps off of the SD card). The last custom rom I tried of Modacco's disabled my SMS functionality.
Not that I think it matters. I'm in the USA, running the HERO on a SMS network (CellOne or CellularOne - aka: chinookwireless.net).
Also, if anyone out there knows how to get MMS working on CellOne (cellonenation.net) on this phone... (I LOVE YOU! and would pay a small amount of $ ($20) even to you if your info "works" via paypal - I'm an honest fellow... trust me you'd get the money).
I've tried to fanagle the settings on http://www.cellonenation.com/support/ they have a link near the bottom of the page "What if you have a smart phone? (CLICK HERE)" (multiple HTC phones, none are andriod). But with no success.
Sorry for the long posts... People hate reading them... I just want some simple help... without getting slapped down for not being able to find all the info I need from "searching" the forums. Pppppplease (says roger rabbit)
Current APN Settings on the HERO HTC that I've got working Phone, Internet and SMS are:
Name: internet.chinookwireless
APN: internet.chinookwiress.com
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: wapgw.chinookwireless.net
MMSC: http://mms.cellonenation.net/mms/
MMS Proxy: 204.181.155.195
MMS Port:8080
MMS Protocol:Wap 2.0
MCC: 310
MNC: 570
APN Type: <not set>
None of those MMS settings seem to matter (still nothing works). I've contacted my provider. MMS is turned on and part of my calling plan. Note: CellOne doesn't sell this phone, I ordered it from Buy.COM vendor in the US it is factory unlocked. Help?
One final thing to request... The internet on CellOne is either REALLY, REALLY slow (up to 30 seconds just to load google.com (mobile version)) or there must be a better radio driver out there? How to on that would be grand as well.
http://android.modaco.com/content/htc-hero-hero-modaco-com/293461/how-to-partition-sdcard/
Hi, I wonder if anyone can help me setup proxydroid on my Samsung S3 (i9300), it's running Android 4.3 and is rooted.
The proxy I am trying to connect to is Host='bp1bakpa001.bp.com' Port='80' and I have a user name and password as well.
I have tried setting it up with the following settings in proxydroid: -
Host: bp1bakpa001.bp.com
Port: 80
Proxy Type: HTTP (Also tried HTTPS)
Enable Authentication TICKED
User: My username
Password: My password
Global Proxy: TICKED
Everything else is as default when installed. I know my phone can get the internet through this proxy as I have had it working with Sandroproxy but it doesn't work all the time and I'm told proxydroid is better. For Sandroproxy I had to put 'localhost' and '8008' in the phones wifi settings (wifi>connected network>Modify network config).Do I need to do something similar for proxydroid?
Any ideas where I'm going wrong?
Any help would be much appreciated.
Did you ever resolve your issue?