Related
According to the problem of "Invalid Vendor ID" when trying to restore the original rom that i mentioned the topic 'XDA Live report'. I really wanna know to sovle this problem.I did update rom 'RUU_HERMES_HTC_WWE_1[1].35.255.2_1.35.255.102_1.08.00.10_SHIP.EXE' afte that i updated my dopod 838 pro to Rom ' XDA Live' for a few day. I want to use the original rom 'HER_DopodAsia_1237074_1060010_WWE_SHIP.exe' then i updated my hermes to the HER_DopodAsia_1237074_1060010_WWE_SHIP.exe.Then reset my dopod 838 pro. I saw the first screen 'No gsm' and stop everything at the welcome screen. So i tried to fix the problem as the wiki 's suggestion by pressing button 'OK' and Power together with reset by stylus for enter the tri colour for updating but the big problem is that my dopod 838 pro can't connect to computer. The icon 'synconize' at the task bar shown gray colour not green colour !!!!
What should i do now ? Pls Help me !!!
Does your device show USB at the bottom of the tri-colored screen when connected to your PC?
It shown USB at the bottom!!
can your phone boot? not into bootloader mode but into the normal mode
can't boot normally..stop at the welcome screen
I had the same problem when I had the Cingular 2.06 ROM and wanted to put back again SA 1.35 ROM...for the exception I was stacked in Bootloader. I get the "Invalid vendor" error and instead of ran the upgrade again I disconnected my device...and from that moment stacked in bootloader and grey icon in windows...But I managed to unbrick my device by putting on again the ROM I have before I have tried to upgrade...so I had to put on again the Cingular 2.06 ROM and it works for me (or I was just lucky)...but believe me...it was 3 hours of fear & suffer...
Hope you will be able to unbrick your device...
Regards,
Primoz
Is there any rom which can unlock this error? There is a lot of rom at wiki.I don't know the previous rom that i had before ....
...I assume you have the original ROM on your device...or you have made some other ROM updates before?...if you have a Cingular put the latest Cingular ROM...if you have a HTC (original) device put the last HTC ROM...and so on...I hope this could help you...
Regards,
Primoz
Pc78 said:
...I assume you have the original ROM on your device...or you have made some other ROM updates before?...if you have a Cingular put the latest Cingular ROM...if you have a HTC (original) device put the last HTC ROM...and so on...I hope this could help you...
Regards,
Primoz
Click to expand...
Click to collapse
How baout the coneection between my dopod 838 pro and computre? Because it shown gray icon instead green icon ? How to connect ?
jcute said:
How baout the coneection between my dopod 838 pro and computre? Because it shown gray icon instead green icon ? How to connect ?
Click to expand...
Click to collapse
It doesn`t metter...in my case it was grey too...but I managed to upgrade...just try...I think you cannot be in worst situation you are now...give it a tray and report...I hope it work!
Regards,
Primoz
Pc78 said:
It doesn`t metter...in my case it was grey too...but I managed to upgrade...just try...I think you cannot be in worst situation you are now...give it a tray and report...I hope it work!
Regards,
Primoz
Click to expand...
Click to collapse
I did update rom "HER_DopodAsia_1237074_1060010_WWE_SHIP.exe" ( The original rom' but still got the same problem !!!
jcute said:
I did update rom "HER_DopodAsia_1237074_1060010_WWE_SHIP.exe" ( The original rom' but still got the same problem !!!
Click to expand...
Click to collapse
did the install complete successfully?
are you able to mtty into the device?
jeRrRKKKK said:
did the install complete successfully?
are you able to mtty into the device?
Click to expand...
Click to collapse
not complete!!! i did mtty to my device. There is no error.Should i save after finish ?
This is what i did...
Type the following commands (do not copy paste!!!)
USB> password 0000000000000000
USB> set 1e 1
USB> erase a0040000 c80000
USB> erase a0cc0000 c80000
USB> erase a1940000 640000
USB> set 1e 0
After set 1e 0....what should i do next ?
Hmmm password?!...I think you should type info 2...not password...?!
Regards,
Primoz
Pc78 said:
Hmmm password?!...I think you should type info 2...not password...?!
Regards,
Primoz
Click to expand...
Click to collapse
can you give me the complete command ?
jcute said:
can you give me the complete command ?
Click to expand...
Click to collapse
Connect to the PC and run mtty.exe and you get this
USB>
type: task 32
then type: info 2
before running mtty.exe uncheck "Allow USB connection" in the connection settings of Activesync...
When you will try to update don`t forget to check again "Allow USB connection"!
Regards,
Primoz
p.s. I think you should move to the sticky theme of dead hermes...
Pc78 said:
Connect to the PC and run mtty.exe and you get this
USB>
type: task 32
then type: info 2
before running mtty.exe uncheck "Allow USB connection" in the connection settings of Activesync...
When you will try to update don`t forget to check again "Allow USB connection"!
Regards,
Primoz
p.s. I think you should move to the sticky theme of dead hermes...
Click to expand...
Click to collapse
Pls take a look !
jcute said:
Pls take a look !
Click to expand...
Click to collapse
Mhmmm...try firt to put a space in front of commands like this-
USB> task 32
USB> info 2
...
regards,
Primoz
what is your bootloader version?
if you can mtty in, simply load the os again...
lnb OS.nb
then let it boot in first
later then decide, is radio working? is OS working?
I have a bricked Hermes, I am not able to flash it.
Is it possible to flash a hermes, when it starts till the following picture ?
And I have no usb-connection via active sync, only with the Multi-Port TTY.
No I've read that I can flash it in the bootloader-modus with the command "wdatah " ?
So i pu in following:
USB>
USB>password 0000000000000000
HTCSPass1.CMˆËHTCEUSB>
USB>set 1e 1
USB>wdatah HERMIMG.nbh
Invalid parameter number!
USB>
So what is wrong ?
data is sent in blocks, you can't flash with mtty.
and how can I flash ?
I've also tried it with "hermimg.nbh" on the micro-sd card.
But it only shows loading... and then checking ... and nothing more.
Bundy said:
and how can I flash ?
I've also tried it with "hermimg.nbh" on the micro-sd card.
But it only shows loading... and then checking ... and nothing more.
Click to expand...
Click to collapse
first... what bootloader are you running.
secondly... what's wrong with your phone?
....thirdly what were you doing when the phone became faulty?
first ... i have SPL 1.04 and bootloader 107
secondyl... my phone doesn't start - first it looks like a tv with no antenna and with some numbers at the botton - also no gsm
and then i see the blue "windows-mobile" screen.
thirdly - i have flashe my device and since the flashing the hermes doesnt start
I think I've tries everything - but nothing helped
Try to flash HTC 1.18 rom with bootloader 1.04 and run the RUU two times. If this doesn't work try to flash a radio using HERMflasher.
pof said:
Try to flash HTC 1.18 rom with bootloader 1.04 and run the RUU two times. If this doesn't work try to flash a radio using HERMflasher.
Click to expand...
Click to collapse
Aha this should work because the device was already in bootloader when we ran the RUU for a second time, how we got past CID check in the early days?
Makes sence to try this.
I try it...
Must I start it in bootloader-mode ?
and have I to activate active-sync or disable it ?
Bundy said:
Must I start it in bootloader-mode ?
Click to expand...
Click to collapse
yes
Bundy said:
and have I to activate active-sync or disable it ?
Click to expand...
Click to collapse
disable
So, I've done it serveral times...
After the first time - Error222 : Device not responding
After the 2nd time - Error 250 - Update Error
and I have done it a 3rd time - Update Error again.
why can't i flash the hermes with my micro-sd ?
Bundy said:
secondyl... my phone doesn't start - first it looks like a tv with no antenna and with some numbers at the botton - also no gsm
and then i see the blue "windows-mobile" screen.
thirdly - i have flashe my device and since the flashing the hermes doesnt start
I think I've tries everything - but nothing helped
Click to expand...
Click to collapse
i have the same, except that the reason is that i touched the usb cable and it disconnected and when i try to put the firmware, i have error 260
yes, I have also ERROR260 and not 250. Sorry...
And what have you done with your device ?
I have the same problem! It seem that there in no connection between the pc and pda... Other methods to update? I tried with the micro-sd too... It starts, but when it checks, so it freeze... Maybe the CID of the pda and the ROM's one is different?
Bundy said:
So, I've done it serveral times...
After the first time - Error222 : Device not responding
After the 2nd time - Error 250 - Update Error
and I have done it a 3rd time - Update Error again.
Click to expand...
Click to collapse
I have the same problems. Put WM6 on my device. Now I have the Error 222. Also when I put HERMIMG on a SD card he do nothing. The difference between your device and mine is, that i boot the device but can't change any data. Don´t know what to do....
I am just trying the hermflasher.
Does anyone know how long the flash will last ?
There is no progress shown - only FLASH NBH on the device.
You should not flash a NBH, you should flash a radio: extract GSM.nb from the NBH file and flash it using the command 'hermflasher -F radio GSM.nb'.
@pof :
I've done what you said - and it works.
At start i have the strange screen (like a tv without antenna) but then it works.
Now I have : ROM-Version 1.25.207.2
Funkempf. 1.03.03.10
Prot. 32.34.7010.01H
Thanks a lot for your help.
And now, I consider to put another ROM on it (WM6 ?). to get at least a normal screen at startup.
First consider puting HardSPL to avoid bricking it again
Then flash any NBH containing the splash screens and you'll get the boot screen back
help me please bro,, i want hacked my htc hd 2 and first i flash with hspl in this
and susscessed,,
and next my step is flashing stock room and i download in this
Code:
4shared.com/dir/22189940/b8552fa0/Shipped_Leo_ROMs.html
i download stock rom LEO 2.10 next my htc hd2 updating sudenly htc hd2 restart before finished update the screen after restart is triangle look like this pic
and i tried another stock rom but the screen like this
and im waiting but the loading never finished
this my tricolor
SPL 2.08 before i flash stock rom my spl 1.42
anything idea how to fix my htc hd2 problem ???
thanks for your help
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
ClydeB1 said:
The problem is with the spl. In order to flash roms that are not for your device you need hspl. Your spl is only 2.08.0000, you need to change this to 2.08.hspl.
Click to expand...
Click to collapse
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
****thefuckerz said:
you mean i must download this file bro ?
Code:
forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
how i can change 2.08 hspl where my htc hd 2 can't connect with activesync ??
thanks for ur help bro
Click to expand...
Click to collapse
thats correct
you must go into bootloader mode, start the the tool and then u can install it(push and hold volume down+turn on the phone)
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
ok i'll try bro thanks again for ur help...u have yahoo id bro?
****thefuckerz said:
ok i'll try bro thanks again for ur help...u have yahoo id bro?
Click to expand...
Click to collapse
Pleasure m8. No I don't. You can PM me though if you have more questions.
ClydeB1 said:
No need for ActiveSync. Put phone in bootloader (tri-colour), connect to pc and when device shows usb in the bootm section of the screen run the hspl app again. Choose 2.08.hspl and all will be fine.
Click to expand...
Click to collapse
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
****thefuckerz said:
Thanks bro,,sucessfuly
what should i do now to hacked my htc hd 2 bro ?
Click to expand...
Click to collapse
Load spl 2.08.hspl by running the hspl2 tool. Once that is successful (check in bootloader again to see that it has successfully installed) then you can flash to the rom of your choice.
hi pls help
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
loonyozzy said:
hi i have same problem i did everything but for me it didnt work why i saw it worked for that guy pls help
Click to expand...
Click to collapse
Enter bootloader and supply all of the info you see there.
Actually you can't do much wrong. just connect the to your pc and then use the brilliant hspl2 to hack your spl on the phone, and then you can reflash the rom....
I have had same symptoms, tried everything... then....
Finally I have noticed that I can't flash through USB because on my micro-sd card I have placed LEOIMG.nbh which caused HSPL error 0028002
Before you flash remove micro-sd.
I hope my experience will help.
SAME problem no resolution
HI I have same problem Screen with exclamation mark then boot screen with gour colours showing this
HX-BC
SPL-1.42.0000 XE.
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
So I've tried to install HSPL 1.42 With no card inside but during installation i get.
Download http://forum.xda-developers.com/attachment.php?attachmentid=297541&d=1269287146
1. Remove micro SD card.
2. Reboot phone while holding volume down.
3. Connect to the PC via USB.
4. Run HSPL2_RUN.exe and follow the steps on your screen
Same problem
Hi, I have also this problem. I tried to install the stock rom but during it an error occured and it stopped before finished. Then there is the triangle and "software update failed". My spl says that I have the version 3. and something and also when I try to run the hspl.exe an error occurs that says that a file RAPi.dll cannot be found and then it waits for usb connection and finaly an error occurs "cannot connect".
Please could someone help me ? WHat am I doing wrong ? Or what should I do ?
thanks
phone have spl-1.16(was in phone,i don't make hardspl) but when i try write an cooked rom phone stop at 75% and now start in bootloader with power on+camera buton, with power on buton phone start in white screen and one vibration.
i try something with mtty but i don't understand very goog the procedure,i need a memory card insert in phone or without memory card?
when i start mtty and write first comand:
Cmd>password BsaD5SeoA
Pass.
HTCST ÚÈÒHTCE
Cmd>
i don't know what do now
can help me somebody?
thanks
nobody can help me?
iugo said:
nobody can help me?
Click to expand...
Click to collapse
I can try, can you tell me what is written in your bootlader and stop using mtty.
Regards,
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
iugo said:
in left screen writte:
NIKI100
SPL-1.16.0000
CPLD-4
and in down screen write SERIAL without cable in phone and when i insert cable in phone write USB
Click to expand...
Click to collapse
Thanks, just download This rom after download just connect you're phone to your computer, make sure your phone is in bootloader and run the exe from the download this will flash the original rom, if everything is ok, you will have the original wm 6.1 rom after that you need to Hardspl your phone, just read this Thread.
Just keep me informed if the original rom can not be flashed.
Succes buddy
dont'n work ,stop at 1% after that phone restart in white screen. i attached file with error.
In which language was your original rom ?
before was in italian language
iugo said:
before was in italian language
Click to expand...
Click to collapse
Here is the link for Italian, try to do the same as I mentioned before, just make sure active sync or wmdc is turned off.
Greetz,
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
iugo said:
thanks man,with that rom phone work, now can instal hardspl 1.22? is ok that hardspl?
Click to expand...
Click to collapse
Yep buddy, that's ok, now you can do the Hardspl as I mentioned before, just read carefull.
Succes,
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
iugo said:
now work with new rom cooked, i see in phone gps antena,have integrated gps antena? wi-fi suport?
Click to expand...
Click to collapse
Perfect it worked for you, enjoy your cooked rom, and sorry no wifi, the gps is for communication with an external gps receiver.
Greetz,
ok, thanks for your help.
hi friends,
i have a htc dual touch with french language ,
i want to change the language to english ..
first i treid to do hard spl (getting error , not starting)SPL_1160000_Ship.exe
ps help me...
the info is
NIKI 100
SPL-10.16.0000
CPL4D
AND THE VERSION IS 131.71.09.........
and i have run the file
1."RUU_****_HTC_WWE_11340501_Radi.exe"
2.RUU_****_HTCASIA_AUS_13171012_.exe
3.RUU_****_HTC_WWE_2094051_Radio.exe
and the hard spl file "hardspl-1.22-****-shipped.zip"
but getting error
pls help me
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
can anybody tell me why its not starting even the hard spl??
ameerali19 said:
can anybody tell me why its not starting even the hard spl??
Click to expand...
Click to collapse
Sorry buddy, but you don't have hardspl and that is your problem, so you have to do the hardspl again.
Succes
sir
i have tried with these hrad spl files....
1.hardspl-1.15mfg-nike.zip
2.flash-hardspl-niki.zip
3.Hard-SPL-Neon.zip
4.hardspl-1.22-nike-shipped.zip
if i am wrong can you give me a good /working hard spl??
or how can i cid unlocikmthe phone(i dont know the phone is cid licked or not)
thanks in advance
Hi buddy, try this
1. Copy the sspl 1.16 to your phone.
2. Turned the phone off.
3. Removed sim and sd-card
4. Turn on the phone and launched sspl 1.16
5. Connect on computer and usb appears.
6. Running hardspl 1.22
Greetz,
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
ameerali19 said:
i have already tried the procedure...
but getting error while click on hard spl... in file explorer(mobile)...
thanks for your reply
pls help me
Click to expand...
Click to collapse
You have to flash the hardspl from your computer (same procedure as flashing a rom) while your phone is conncted to your computer and not try to run or launched it from your phone.
Greetz,
now its running suddenly to 100% and geting the error(244)
i have tried with the file
hardspl-1.15mfg-nike.zip
and
Hard-SPL-Neon.zip
pls help me
thanks in advance
Just do as I wrote above and don't try to use another Hardspl which is not ment for your device, because error 244 means that you have used the wrong RUU to do the upgrade.
If you have trouble's to flash the hardspl 1.22 just do it from the bootloader to get in the bootloader is turn your device off and turn it on while pressing the on/off button and the camera button on the same time.
Now you are in the bootloader (it's a 4-coloured screen with some text) connect your phone on your computer, phone must stay in bootloader and then flash Hardspl 1.22 from your computer.
That will do the trick.
Greetz,
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
run sspl1.16 on phone
disconnect USB cable
kill Active sync (or disable AS USB connections)
connect USB cable
run hspl 1.22
it must work...
or go to friend and do it on his computer...
ameerali19 said:
info:
NIKI 100
SPL-1.16.0000
CPL4D
radio version:1.31.71.09
AND 1.58.16.27
* (1) i have tried with many rom file ... but its not starting(0%).. ,
(2i) ts starting in 1 or 2 file , but only run upto 1% and getting error
( 264, 294)
* i think the havent any network lock(country lock).. itw working with
all sim..
* I tried by pasting the "sspl-1.16-nike.exe" in phone , but same...
* i tried by repalcing the .nbh file as NIKEIMG.nbh and paste it in
mmc card after format ,but it is stuck on "LOADING"
*i tried to put the "spl-1.16-nike.exe" and NIKEIMG.nbh in mmc card
, then its not starting , stuck on the rainbow window...
some files are
1.ROMUpdateUtility.exe
2.hardspl-1.22-nike-shipped.zip
3.RUU_Nike_Radio_1581627_2561300.exe
4.Hard-SPL-Neon.zip
5.-HTC_Touch_Dual-HTC_P5520_ARA_1.31.415.15_1.58.21.24_Ship.rar
6.Niki-SuperCID-Security-Unlocke.rar
7.SPL_1160000_Ship.exe
8.hardspl-1.15mfg-nike.zip
9.sspl-1.16-nike.zip
pls help me
thanks in advance
Click to expand...
Click to collapse
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
addgsm said:
my phone niki touch dual cannot run sspl-1.16-nike.
when turns to 3 color then stop. pls help
Click to expand...
Click to collapse
Send me a pm and I'm gonna try to help you
Greetz
ameerali19 said:
sir
i have tried with hardspl-1.22-nike-shipped (1).zip
but not starting(0%).........................
and at last getting error ...
pls helpme
thanks in advance
Click to expand...
Click to collapse
i have same Problem ......
any other idea ?
Thanks.
denva said:
i have same Problem ......
any other idea ?
Thanks.
Click to expand...
Click to collapse
Hi denva, try it this way http://forum.xda-developers.com/showpost.php?p=11218363&postcount=701
Greetz,