Hi Guys
I am a newbie to this forum and need your expert advice.
My atom life had PDAVIET ROM wm6.1 which my friend had loaded for me some 2 yrs ago. Now the problem is all of a sudden my set software got screwed and it is stuck at the black screen saying-
=========AL1 640K EBOOT===========
Feb 13 2007 11:08:06 Ver 0.73
CPLD Ver A): B0061120
CPLD Ver B): B0061120
********************************
*Using '<-', '->','Enter'*
*to choose what you want*
********************************
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode.
(5) Burn MOT/BL via UART.
Enter your selection:
====================================================
Now i need your help to tell me how do i fix this problem.
I have 2 concerns.
1. I DONT have a mini SD card so is there any ROM available by XDA developers that i can use thru my PC only. Also wat are the steps i need to do to get a successful flashing.
2. Please advice me on wat ROM shud i use that is fast, stable and can be flashed from PC also.
Many thanks in advance. Please to help me soon
Cheers RJ
Related
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
donot ever try thru SD card.. there is a chance that you may brick your device.
Goto bootloader mode first then u run DSUU.
Now after i did that, it dosent work with DSUU .it show "error connection".and my divice shows the upgrade fail
How many files you have in the upgrade directory? Normally it should contain 6 files:
- Device Software Update Utility.exe
- diskimage_Ver.nb0
- EBOOT.nb0
- ExtendedRom.img
- nova_pda_033105.mot
- vl1d_pda_Ver.mot
It will always shown connection error if one of these files is missing
I have all of them,
It seems feasiable to full downloadig the Rom from SD(memory card), but i need mor files:
"diskimg.nb0 , eboot.nb0 , dm.nbo , flash.img , agent.mot , mot.mot , CPLD.img , assetInf.img , extended.img , Mdoc.img"
If it's possible to upgrading with them how can i rech them ?
hello...!!!?
can enybody help me with this case? I need Your Help. Please. . . .
shaemna said:
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
Click to expand...
Click to collapse
Why did you do this?! No one gave out instructions to flash anything using SD CARD in the first place! Of course you will get connection error because bootloader is not functioning. Remove your SDCard, start bootloader mode, and flash the normal way.
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
shaemna said:
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
Click to expand...
Click to collapse
can you go into bootloader mode?
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
shaemna said:
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
Click to expand...
Click to collapse
I'm sorry. I don't get you. You can go to bootloader, but you get an error. Can you post a screen shot of the error? so, I will know what to do.
How can I uplod picturs?
server is busy it get me Network Error (tcp_error) and cant upload it
the doucument of it is:
(the upgrade page)
Your Divice software is about to be update from:
divice CE image version:0
divice Radio image version:
to:
CE image version: 7210621
Radio image version: R060711N-MN2ARC-RS00011
.......
PLEAS CLICK update to continue
when i click upgrade it show me the fowloeeng error
ERROR:CONNECTION ERROR
THE DIVICE SOFTWAR UPDATE IS HAVING TROUBLE CONECTING TO YOUR DIVICE
PLEAS CHEKE
1)YUOR DIVICE IS PROPLY CONNECTED TO THE USB CABLE OR ...
.
.
.
now what should i do?
do you have any other USB to mini-USB cable? try changing it... The ones used for SD Card readers or Digital Cameras are the same, and do it again.
i do that in all of my USB ports and they are same and get me error conection again
Is there any wey else to inistall a ROM on my divice?
1) Is windows recognizing your device?.. (Do you have activesync installed?)
2) Did u try using different USB cable ?
3) Are you logged on as administrator?
4) Did you remove SD card before going to bootloader mode
5) What is the screen content when you go to boot loader mode
6) Before connecting the device go to bootloader first, then connect the device and then run DSUU
7) Activesync may install device drivers for your device so try installing activesync?
Thanks
when i get my divice in to the bootloader it's display:
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta cor
poration
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
when i conect it to pc( as administrator user) the fallowing line was shown:
USB connected , waiting for download command...
and my computer beeping and found new hardware but not connected to activesync(4.5) , then i start DSUU and when start to upgrade computer show me "ERROR CONECTION" and my divice show me this note:
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
please help me
1. We get the most first sewing of Xda-atomexec-eng-20060614_r060428n_ex0028.exe (only by this sewing restore was able)
2. We drag out the files of eboot.nb0
3. We copy on miniSD in a root directory.
4. We insert miniSD in Pocket, enter in bootloader (Camera+SR)
5. We wait inundated while.
6. We take out a miniSD, enter in bootloader, start sewing on PC, connect to USB (it is needed to put to death in the processes of AS)
We are sewn!!!
just following the Unlock step to do it,
after the unlock programe step 2, that's show the faild to connect and U1000 screen shown nothing ,,,
I try to click step 3 of the unlock programe that's no any response....
now just have the power light on show when I insert the USB cable...
Anyone can help me.???
Pls & TKs
After try cam+reset, the 3 color screen show,
but using the unlock programe also can't reflash my rom,,,
I trying the AP Dual 3.0 to flash the rom...
its showing the percentage but not yet know aftweword...
Lucky,,,, its flashed AP Dual 3.0 ROM
Radio Version:1.16.00.00
Protocol Version: 32.53.7018.01H
ExtROM verison: AP Dual 3.0
Should I know the procedure of flahs rom?
I want to flash the WWE_HTC rom as beginning....
any one can help me? give me some tips for search in forum?
tks very much
Hello did somebody know from where i can download original WM 6 or 6.1 ROM for HP IPAQrw6815-not modified?
thanks
Teodor
[email protected]
hp doesn't come out with WM6 or WM6.1 for ipaq 6815.... there's only custom roms which are modified to work with ipaq 6815... you can choose from a variety of them in here.... have fun!...
thaks for this
Help with My ipaq 6815
Nhocbanme hi,
i've read thru many of the replies in this forum. i'm a newbie and don't knw much abt roms. i tried upgrading or if u call it flashing my ipaq via PC and later SD. the PC flash did not work. i had to wait almost the whole day becos it said it was reading configuration from the phone. i later tried the flash via a transcend 1GB miniSD and till today the phone has gone off. i tried to power it on even with th e battery fully charged. my sis has the same phone i tried swapping batteries but it still didn't come on. i really need to upgrade to windows mobile 6.1 i formerly had WM 5.0, today itried again and it still stays on the boot screen.(white background with the HP logo and the Pbl 1.05 at the botton of the screen .
please i need help ASAP.
Downlgrade your bootloader to 1.01
Hi,
You have to downgrade your bootloader from 1.05 to 1.01. Find in the following the instructions how to do it. I did it and it's working.
Be careful when you do downgrade, because you can end up without phone
Quote:
How to flash from PC with Windows XP (It is ok to run it in vmware)
Thanks Knave and rcperez for posting their detailed experience so I can write this section. Also thanks jimmyspa for improving the addheader's performance greatly.
1. Check your Boat loader version
(do a soft reset, and check the value printed at the bottom during the HP logo screen)
2. If you noticed that the last line states BL 1.00.05, it means you have boat loader 1.05 installed. You will need to download and flash your phone back to 1.01 via ftp://ftp.hp.com/pub/softpaq/sp34001-34500/sp34053.exe (VERY DANGEROUS, FLASHING VIA SD IS MUCH SAFER!)
3. After successfully downgraded your phone's boatloader, or your version was already v1.01, you can proceed to flash your phone to the rom.
With the check done, proceed with the required files.
1. Go to download section to download the rom file. -- The rom that you downloaded, e.g (diskimg.nbo)
2. Download the file pcupdate.zip attached in this thread and unzip the contents to the same folder you used in step 1.
3. Download the latest Rom file and extract to the same folder
4. Run BuffereAddHeader.bat. It will take seconds to generate a diskimage_Ver.nb0. (You should have Java Runtime > 1.50 installed, http://www.java.com/en/download/manual.jsp)
5. Move your phone to boatloader mode ( press the two - keys, follow by a poke at the soft reset hole with your stylus )
6. Connect the phone to the PC
7. Execute the Device Utility Update program and wait till it verifies the state. Click on Update Item "All" use cursor keys to change it to "OS ONLY" then hit next **** SELECT "OS ONLY", if you cant change it to "OS ONLY" DONT PROCEED!!! It should detect your device as Model 0 etc.
8. Press Next to begin flashing.
9. Once completed, the phone will reset by itself. Wait for a while for it to startup.
REMEMBER SELECT OS ONLY BY PRESSING DOWN IN THE SELECTION BOX
Here are the notes & files provided by hochengsoon with README for flashing via Windows XP
PC flashing using BL1.0.1 must be done from C:\Windows\Temp, so why not start everthing from this folder ie PCUpdate + ROM + missing file(s).
PCUpdate1.rar - http://www.mediafire.com/file/k5jumzzg1mm/PCUpdate1.rar
How to downgrade to WM5 using PC
1. download wm5 rom from http://h20000.www2.hp.com/bizsupport...pappid=NextGen
2. run it and after entering the updating screen cancel it.
3. replace the hpRUU.exe in c:\IPAQ(default install) with the attached file hpRUU.exe in archive hpRUU.zip
4. Connect device to PC, then press and hold two "-" button and reset.
5. Run hpRUU.exe and do a normal update.
Note: you may delete eboot*.nbf to prevent bricking the device.
bootloader missing
well i m using HP rw 6815, n last night i had flashed a 6.5 rom , later i was unsatisfied with tat rom,
so i went 2 change it, n during tat process, my phone turned off, n now it doesnt switch on, 1ce i managed 2 go 2 boot screen thr i cud see hp logo n bl-0.0.0 can ne1 help me out with it, how do i put bootloader in phone.. neither my pc detects the phone... help appriciated
HI i had same problem on hp rw6815
No bootloade aparantly but bootloader hp logo loaded but insted o o.0.o i had a ff.ff.ff bootloader. i dunno what that meant. i inserted a eboot.nb0 on sd reseted in bl (v1.0.5 from this forum).... bootloader updated oki.. but my phone transformed in a hp rw6828, and i can install 6828 rom working and bootin fine in rw6815, the rw6815 rom install via sd but restarts on boot screenn .. this appeard when i tried a downgrade from wm6.5 to wm5 when i try to upgrade via hpruu it looks tat i have a no language hpipaq model.. My model info is "€ R 0 6 0 8 2 2 N _ M N 1 A R C _ R S 0 0 0 5 2" i dont know how to interpret this file sysyinfo.txt with that data. my question is how can i downgrade to wm5 and original bl of hp rw6815? i have all files in nbf form. The onli soluton to the problem if ur phone restarts after rom upgrade downgrade on witn wm 6.5 an 1.01 bl is the atrached rom.. workin 6815-camera-patched-R3.zip is the only rom... located here http://forum.xda-developers.com/showthread.php?t=360664 second post under orher roms
6815 camera patch may work version r2: http://www.mediafire.com/?lihy0vcvnxd
6815 camera patched version R3: http://www.mediafire.com/?2mjhtgjox0x
This roms get ur phone alive after this bug... or the restar bug... they work with both 1.0.1 bl and 1.0.5 bl more stable with 1.0.1... and i thing the developer of the rom did not change the indentifier of the rw6828 rof for 6815... i think it;s hybrid rom between... it works.
Plese help me to downgrade to original state... hp rw6815 bl 1.0.5 rom wm5. or help me solve the hpruu problem... not patched for model and lang beacouse it says the same incopatible thing.. the picture is the same result in patched and original ruu.. .
me too
i got that same problem i dont know wahta to do help guys
bootloader missing after Upgrading to wm 6.5
Hi Dear, i had the same problem but the solution is so funny.
1. Remove Battery from your mobile.
2. Remove SIM card too.
3. Wait around 5 min. & put them back again.
4. Everything should be OK
I hope Problem solve like me , But realy i don't know why ??? .
Best regards, Jalal
I tried to flash the 6815 is here and I have put my diskimg.nb0 on 2gb memory card. Press the 2 buttons with the "-" and give it to reset with a stick ... I get into the bootloader and returns to the screen while windows. It might be because the bootloader has the pda is 1.0.5??
The problem is that trying to change the bootloader 1.0.1 is here and not working because my pda is Spanish.
How can I reduce it?
Dear SHKUMBIN,
I am very grateful for the clear and beautiful explanation, which indicates that a great effort and considerable experience and also " NHOCBANME " and " ARIEY " for the great job they do to bring those custom rom's.
Accept my greetings.
karamzak
Hi all experts out there,
I am in a sort of a mess upgrading of atom exec from wm5 to 6 or 6.5. I have gone through various posts here in the forum but compelled to put it here. I also read this again & again http://forum.xda-developers.com/showthread.php?t=331818 (more or less same case) but am lost!
can u guys help me in easy steps upgrading my atom exec to wm6
this is what my device says..
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta corporation
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
USB connected , waiting for download command...
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
and attached are the pc screen shots i am getting when i try to upgrade to wm 6.x rom or even the original shipped wm5 rom.
i am not using SD card method.
would be indebted if some geek helps me through.
Go through this:
http://forum.xda-developers.com/showthread.php?t=358442
Hi You all,
Well here is my question to you,
I have an HTC Touch DUAL NIKI100 SPL-1.16.0000
CPLD-4
1.58.16.27
25.61.30.03h
I have bought the cell in France but live in belgium. He was as you know simlocked. Now i try'ed to unlock him with the tutorials given here in this forum
And have to say it is a very poor tutorial. Doens't understand what to do at all?
I have unlocked a lot of cell's .. Most of the time Iphone, I Homebrew and chips a lot of gaming consoles (Wii, PS2, Xbox) so i have to tell i know what i am doing, but this tut made my hair stand up because i really cannot folow during the poor tut.
Now i have payed to unlock my cell and now it works.
But here is my other question... How can i set this phone into the dutch language?
When i do this steps :
1. download the attached files - OK
2. REMOVE SIM and SD CARDS !! - OK
3. connect usb cable - OK
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!) - OK
5. after a few seconds "USB" appears on the display - Stays at Loading
Click to expand...
Click to collapse
and then i am stuck.
Then i try'ed to just skip 4 and 5 an go further .. But then when i am :
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki : tells me to go from 1.58.16.27 to 1.00.00.00 (or something like that)
9. after installing the hardspl you can flash any rom (rom cook project here)
It is very anoying ! Can someone give me a BETER explenation how to resolve my problems ..
Sorry for the bad english, but as you could see i am from belgium
Kind regards and hopefully till i get a good explenation.
Peter
Weird. it will show loading if the microSD is still in the slot. remove cable when u see USB after running SSPL & reconnect cable > flash HardSPL.
at step no 8, just ignore the version numbers.