Hi all experts out there,
I am in a sort of a mess upgrading of atom exec from wm5 to 6 or 6.5. I have gone through various posts here in the forum but compelled to put it here. I also read this again & again http://forum.xda-developers.com/showthread.php?t=331818 (more or less same case) but am lost!
can u guys help me in easy steps upgrading my atom exec to wm6
this is what my device says..
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta corporation
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
USB connected , waiting for download command...
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
and attached are the pc screen shots i am getting when i try to upgrade to wm 6.x rom or even the original shipped wm5 rom.
i am not using SD card method.
would be indebted if some geek helps me through.
Go through this:
http://forum.xda-developers.com/showthread.php?t=358442
Related
I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Try putting it into bootloader mode before connecting to your pc :wink:
Can country ID be changed on Atom Exec ?
Tks victoradjei
I actually tried both get in bootloader before / after connect USB, it looks same. The problem is USB not connected, but it is fine if connected on normal status, it can syn to PC.
Is it possible to change Country ID of my Atom Exec then update ROM in syn mode instead of use bootloader ?
Did you also try reverting to one of the regular Atom roms and upgrading from there? Someone has done this upgrade. Search a bit in this forum.
my XDA ATOM EXEC have the same problem,but Xda-Atom-Exec-ENG-20060721.exe have any question.
lawsonxie said:
I've download the Xda-Atom-Exec-CHT-20060721.exe ROM and want to upgrade from my English ROM 20060721B1WWE. I did the below steps:
1. Copy the file Xda-Atom-Exec-CHT-20060721.exe to PC C:\windows\Temp
2. Turn on ATOM EXEC
3. Connect USB cable from ATOM EXEC to PC
4. Get in to Bootloader by pressing "Capture" + "Reset"
Now Atom exec screen display:
(1)debug module through UART
(2)Jump to DM
Enter your selection:
USB connected, Waiting for download command...
5. From PC run Xda-Atom-Exec-CHT-20060721.exe
6. After twice clicks Next, it pop up ask for "Upgrade", I click "Upgrade".
7. An error message came up as picture showing USB not connected.
8. ATOM EXEC screen showed:
!!! Please use DSUU in OS mode and sync with PC first !!!
Usb Transfer Fail
Did I do anything wrong? Please help.
Click to expand...
Click to collapse
hi there, last time i tried to upgrade, i also got that msg. this is the problem, dont put the atom exec on bootloader. just upgrade ur atom exec at "turn on" position. then start the upgrading.
ps : can u email me, where can i get the chinese rom? my email is : [email protected]
thank you
somebody say he know the way ,but need 50 REPLY to suport, your can try to ask him
http://www.discuss.com.hk/viewthread.php?tid=2375924&extra=page=1
i got other way that flash to the CHT rom. You can use the ultraedit sofware edit the diskimage.nb0 file. only need edit the first row of this file. ( you can get the diskimage.nb0 fine in the c:\windows\temp after run the DSUU, BTW you can select see the protected and hided file option in th browser). As the changed value. you can refer the diskimge.nb0 filr in the CHTrom DSUU. detail you can refere the thread here: http://www.pxdxa.com/read.php?tid=21205
I use it to change my new atom exec.
please tell me where can i download the Xda-Atom-Exec-CHT-20060721.exe ROM , chinese rom, thanks
www.seeo2.com
I was just update ENG Atom Exec to CHT Atom Exec,
use ur UltraEdit, open a file which name is diskimage_Ver.nb0 and u will saw the 1st line will be 07210622 change it to 07210629
then save it. Ha Ha..... you can start ur upgrade now.
diskimage_Ver.nb0 will auto creat in c:\windows\temp\ only after u run the rom update Utility
i want to rom chinese atom
i want to rom atom chinese u upload to new post
please tell me where i can download the Atom Exec chinese ROM, i trie the seeo2 website but it won't allow to download the chinese rom because my phone is registered as with english rom...thanks
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
donot ever try thru SD card.. there is a chance that you may brick your device.
Goto bootloader mode first then u run DSUU.
Now after i did that, it dosent work with DSUU .it show "error connection".and my divice shows the upgrade fail
How many files you have in the upgrade directory? Normally it should contain 6 files:
- Device Software Update Utility.exe
- diskimage_Ver.nb0
- EBOOT.nb0
- ExtendedRom.img
- nova_pda_033105.mot
- vl1d_pda_Ver.mot
It will always shown connection error if one of these files is missing
I have all of them,
It seems feasiable to full downloadig the Rom from SD(memory card), but i need mor files:
"diskimg.nb0 , eboot.nb0 , dm.nbo , flash.img , agent.mot , mot.mot , CPLD.img , assetInf.img , extended.img , Mdoc.img"
If it's possible to upgrading with them how can i rech them ?
hello...!!!?
can enybody help me with this case? I need Your Help. Please. . . .
shaemna said:
hi
I need your help to fix my O2 Atom Exec.
i wanted to upgrade my ROM in to the WM6, at the bigining i copied the "diskimage_Ver.nb0" & "EBOOT.nb0" on my memory card. and got my Atom Exec into the bootloader , after download complited the LCD got dark, i got it on bootloader and start the "Device Software Update Utility" and clicked on "Next" until "Upgrad" was shown.When I clicked on "upgrade" this error was shown:"CONNECTION ERROR" . What should i do to fix it?
Thanks.
I'm looking for your answer.
Click to expand...
Click to collapse
Why did you do this?! No one gave out instructions to flash anything using SD CARD in the first place! Of course you will get connection error because bootloader is not functioning. Remove your SDCard, start bootloader mode, and flash the normal way.
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
shaemna said:
I did that but it's not worked. and got me "error connection", i saw some where that if i do it in the that way (with sd) it's worke and beacuse of that i did it in that wey, now what should i do? how can upgrad my ROM or downgrad it, my divice is alredy ded, how can i get it alive? help me
Click to expand...
Click to collapse
can you go into bootloader mode?
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
shaemna said:
yes it's go to the bootloader but when run DSUU plase of the last version of the rom and radio is empty, when i click on UPGRAD it get me ERROR CONNECTION
Click to expand...
Click to collapse
I'm sorry. I don't get you. You can go to bootloader, but you get an error. Can you post a screen shot of the error? so, I will know what to do.
How can I uplod picturs?
server is busy it get me Network Error (tcp_error) and cant upload it
the doucument of it is:
(the upgrade page)
Your Divice software is about to be update from:
divice CE image version:0
divice Radio image version:
to:
CE image version: 7210621
Radio image version: R060711N-MN2ARC-RS00011
.......
PLEAS CLICK update to continue
when i click upgrade it show me the fowloeeng error
ERROR:CONNECTION ERROR
THE DIVICE SOFTWAR UPDATE IS HAVING TROUBLE CONECTING TO YOUR DIVICE
PLEAS CHEKE
1)YUOR DIVICE IS PROPLY CONNECTED TO THE USB CABLE OR ...
.
.
.
now what should i do?
do you have any other USB to mini-USB cable? try changing it... The ones used for SD Card readers or Digital Cameras are the same, and do it again.
i do that in all of my USB ports and they are same and get me error conection again
Is there any wey else to inistall a ROM on my divice?
1) Is windows recognizing your device?.. (Do you have activesync installed?)
2) Did u try using different USB cable ?
3) Are you logged on as administrator?
4) Did you remove SD card before going to bootloader mode
5) What is the screen content when you go to boot loader mode
6) Before connecting the device go to bootloader first, then connect the device and then run DSUU
7) Activesync may install device drivers for your device so try installing activesync?
Thanks
when i get my divice in to the bootloader it's display:
===========MN2 Bootloader=
Jun 13 2006 20:41:44
copyright (c) 2006 Quanta cor
poration
CPLD Ver: A0060109
***********************
*Using '<-','->', 'Enter' *
*to choose what you want *
***********************
(1)debug module through UART
(2)jump to DM
enter your selection:
when i conect it to pc( as administrator user) the fallowing line was shown:
USB connected , waiting for download command...
and my computer beeping and found new hardware but not connected to activesync(4.5) , then i start DSUU and when start to upgrade computer show me "ERROR CONECTION" and my divice show me this note:
! ! ! Please use DSUU in OS mode and sync with pc first ! ! !
Usb transfer Fail
please help me
1. We get the most first sewing of Xda-atomexec-eng-20060614_r060428n_ex0028.exe (only by this sewing restore was able)
2. We drag out the files of eboot.nb0
3. We copy on miniSD in a root directory.
4. We insert miniSD in Pocket, enter in bootloader (Camera+SR)
5. We wait inundated while.
6. We take out a miniSD, enter in bootloader, start sewing on PC, connect to USB (it is needed to put to death in the processes of AS)
We are sewn!!!
Please check it out for the latest news at here.
http://forum.xda-developers.com/showthread.php?t=362338
I make the upgrade from WM5 to WM6 by the following post.
ATOM EXEC WM6 AKU0.7a.0 WWE 20071117A1WWE with STK
ATOM EXEC WM6 0.7b.0 WWE 20071216A3WWE
But I reaily can not accept the Bluetooth headset can not use for phone.
I want to downgrade to my default OS, WM5.
I had downloaded the Offical WM5 roms in my computer.
But I tried to downgrade by DSUU directly after the Atom Exec sync with PC.
The error message prompted with "Error Country ID or Device id Error"
I also tried in other mode, (Camara + Reset)
It can detect the CE IMAGE ROM, but unable to detect the Device Rom version.
So the DSUU will show the error "Error: Connection Error."
How can I downgrade the device the Atom Exec to WM5 ?
have you tried MN1 EBOOT?
http://forum.xda-developers.com/showthread.php?p=1684559&highlight=EBOOT.NB0#post1684559
My friend admin88hk be very careful while playing with the bootloader using sdcard or u will have a bricked device like mine . Read the complete forums on upgrade of atom exec then proceed with caution and cross ur fingers during the procedure.
hmmm.... try this first before you flash with SD Card
http://forum.xda-developers.com/showthread.php?t=335271
cheers,
TJ
Is it follow by this step, the device can be fully backwaard to WM5, if all of the step are success.
After that, the O2 connect and O2 Software can be used or not ?
I am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Can reply me or give me confidence?? Thanks.
am looking for a success case.
Is there anyone has been done the steps which are posted about MN1 EBOOT??
Click to expand...
Click to collapse
Well it certainly has'nt been thought up on a whim, if thats what you're thinking.
Search and find your confidence mate, heck the link has been given to you!
This topic has been discussed in detail in all main Atom threads, try the link given by tjlabias(<-- btw hope you're well mate! ) after if no success then EBOOT method
I have follow the instructurtion for go back to WM5.
But I get a problem in the step 3.
I have download the EBOOT.nb0 and copy to MiniSD card.
After I insert into Atom EXEC, Press camera+reset.
The Screen will post the transfer in completed after 3 - 5 seconds the screen was load.
But the Atom EXEC was not action come out after the following 3 minutes.
So I press camera+reset again.
The screen still at MN2......
How can I change the bootloader to MN1........
any other solution to do it ?
I am reaily can not stand for the phone can not use the Bluetooth headset.
I also has found a some threads also related, but all of them is not work.
http://forum.xda-developers.com/showthread.php?t=331818
This case was very seems with me.
* I am uploading the image to webhost, I will update the post ASAP.
edit: I searched further and found that it could be done. Sorry for the unnecessary post!
-----
on a side note, is it possible to use the ROMs shown here for WM6 on my o2 which currently has WM5? Or do I first have to get an official upgrade to WM6 and then install the new ROMs here?
Hello, this is my first post.
I have bought an SPV M3100 (HTC Tytn). It is my second WinMo phone with touchscreen (first was Eten x500). I've unlocked it (SIM and SuperCID). I've seen here some WM6.5 roms, but they ware moded. I want a CLEAN (original) version of WinMo 6.5 (to customize it myself how i like). I want the WWE version (Romania).
Also, I want to know if WinMo 6.5 have Mass Storage option for card, or i will need a 3rd party program (becouse i don't like ActiveSync) ?
...
Great comunity here
georgik ce faci tata...nu-ti raspunde lumea?
w3b3r said:
georgik ce faci tata...nu-ti raspunde lumea?
Click to expand...
Click to collapse
NU
ooo fratsilor!!!! romania? moldova?
help please
Hi all of you!
I have a Hermes (HTC Tytn/ Orange SPV M3100) and i succesfully tried a lot of ROM’s until these days..
But, this happened:
During upgrade of a ROM, i made the mistake to disconect the device from the PC..
And, now the problem is that i can’t boot ANY OTHER ROM!
I can enter to BootLoader , where i see
HERM100
I PL – 1.04
HERM100
SPL – 2.03
ALSO, i CAN connect to PC (it displays „usb” & i see it on Device manager)
(PC run Vista Ultimate 64 bit).
But, when i try to upgrade ANY ROM , the process starts, BUT STOPS at 0% ? .
I searched & read 4 days for a SOLUTION to make my phone alive again..
Can anyone tell me what to do?
Is a REAL solution for this issue?
Please reply.
Thanks!
Hi Guys
I am a newbie to this forum and need your expert advice.
My atom life had PDAVIET ROM wm6.1 which my friend had loaded for me some 2 yrs ago. Now the problem is all of a sudden my set software got screwed and it is stuck at the black screen saying-
=========AL1 640K EBOOT===========
Feb 13 2007 11:08:06 Ver 0.73
CPLD Ver A): B0061120
CPLD Ver B): B0061120
********************************
*Using '<-', '->','Enter'*
*to choose what you want*
********************************
(1) Enter OS
(2) Enter GSM AT Mode
(3) Enter GSM AT+Diag Mode
(4) Enter GSM Download Mode.
(5) Burn MOT/BL via UART.
Enter your selection:
====================================================
Now i need your help to tell me how do i fix this problem.
I have 2 concerns.
1. I DONT have a mini SD card so is there any ROM available by XDA developers that i can use thru my PC only. Also wat are the steps i need to do to get a successful flashing.
2. Please advice me on wat ROM shud i use that is fast, stable and can be flashed from PC also.
Many thanks in advance. Please to help me soon
Cheers RJ