Running rom 1.66 and radio rom 2.06 and trying to update to 2.12 and have followed all the instruction of the custom RUU installer but at the point of progress bar it freezes on the phone and after a while the pc says it has no connection to the phone. Any ideas???
Cheers
hspl first.
read the stickies before bricking your device.
Related
Hey u guys, I have 2.60 SPL Olipro (it gave an error when installing it on the 100%, but in bootloader mode its what appears so i guess it is installed ). Either way Im trying to update my Radio ROM and i cant seem do it. Ive got the radio rom file and the custom RUU, although everytime i try to update it gives an error at 7% an the PDA gets stuck in the bootloader and the only solution is to install the orginal HTC ROM. in addition, the phone is not Super CID or something, it is unlocked by factory...
Geez nobody here can tell me how to flash a radio rom? i have superCID, hard spl 2.10... I already have the radio rom i want and a custom ruu, but it always gives me a "flash write" error.
hi guys, I flashed my mogule few days before, but it failed. I try to flash it by TF CARD and
USB cable, when I update rom by USB cable, it shows
ERROR [270] : UPDATE ERROR
The image file is corrupted. Please check your Update Utility.
when I udapte rom by TF CARD, it shows
0018003
TITAIMG.nhb - FAIL
OS - Fail
Update Terminate
UPDATE FAIL
I can flash radio alone successfully, but when I flash Hard-SPL 2.40 alone,it seems finished,
but in the red - green - blue screen it shows
TITA100
SPL-2.47No2Chem Titan SPL EVT
CPLD-9
I think it does not work, I can't flash any rom (include sprint offical rom) with OS now, it will be failed,
what should I do? thank you.
Try this file.
http://forum.xda-developers.com/showthread.php?p=1940731
It will help you get out of the bootloader.
Remember, you have to downgrade your loader to get the radio to load. There is not a ROM Update Utility Compatible with the new radio yet.
I'm not sure which ROM you are trying to load, or which radio, so I can't help you too much there.
The information is in the wikis if you read them all the way thru. Then read them again. Then read them again. And the dudes making the roms include any special instruction in the threads.
Thank you very much
I plan to load DCD' rom 3.2.2, Radio 3.42.30. I'm cooking customized ROM by DCD's Kitchen v3.2.2. Can Titan-exibl.exe help me remove bootloader(SPL 2.47 No2Chem) from Mogul? or downgrade the SPL from 2.47 to 2.40?
Before I load DCD' rom 3.2.2, I want to flash RUU_TITAN_SPRINT_WWE_3.56.651.0_RS_3.42.02_SPCS2.04_PPST_0619_Ship.exe at first.
Nope. All it does is kick you out of the bootloader so you can start over.
I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.
This is my first thread so I hope Im not double posting with my question. I am trying to get my HD2 back to stock, I have downloaded the official t-mobile rom from htc. Whenever I try to flash ROM from sd card or any radio it gets stuck at 96% or 99%. I have tried hspl 2.08 and if I do 2.08.0000 nothing will flash at all. I am at my wits end because I have tried every suggestion and have searched high and low through the threads. Any help is appreciated.
Hey! If you installed some other roms (wm, wp or android) you need program task 29!
It will clean your flash memory. After that you need to know what was the original spl on your phone (like 2.08.0000 or 3.05.0000) SPL, not HSPL! Flash your stock SPL! reboot, enter in bootloader again and connect phone in to pc, flash your stock rom while you in bootloader through pc! It works for me 100% Enjoy)
I have a Taiwan unbranded unlocked Titan still on SPL 1.10 (hasn't updated?).
I can't flash anything, roms, SPL, HSPL. I always get an error along the lines of "failed to get version." The updater detects the phone and I see the loading bar on the phone as well as my computer but it always fails.
Any ideas? Even if it did work I'm not honestly not sure what order to flash things in because I can't find a guide for SPL 1.10.
dude, use y cable to flash a ROM, or since u have 1.10 SPL go and HSPL ur phone.
Like I said I get the version error when I try to HSPL.
Flash Europe_eterity_2.05 or 2.5 ROMm via goldacard then do HSPL