Hello there,
In order to run android on my HD2 i need to have at least 2.08 radio, but currently my radio is lower than that. I am completely noob in this category, I've been always using nokia's so i know how to change the firmware in it, but now I'm the user of windows mobile. Could you tell me how to change the radio so i could run the android properly?
My current specs:
HTC HD2 UK T-Mobile (448 RAM)
ROM version: 1.43.110.2 (70315) WWE
Radio version: 0.04.50.22_2
Protocol version 15.26.50.07U
SPL-1.42.000
I don't want to brick my phone, I know that there is an update on the htc site but it's 1.72.110.4, i've seen somewhere that this rom upgrade gives 2.07 radio.
So what should i do? Should i ugrade my rom using t-mobile rom from htc site or should i use something else to just upgrade radio?
Thanks
hspl3 from my sig, then find radio in the radio thread in rom development, , no need to flash a rom to change radio, just flash the radio, no hard reset, no loss ofcurrent data.
samsamuel said:
hspl3 from my sig, then find radio in the radio thread in rom development, , no need to flash a rom to change radio, just flash the radio, no hard reset, no loss ofcurrent data.
Click to expand...
Click to collapse
Thank you , but how to install it? Just connect my phone through USB and just follow the steps by clicking next next? Should i backup some files? i mean files which are responsible for radio?
Thank you again
dawid. said:
Thank you , but how to install it? Just connect my phone through USB and just follow the steps by clicking next next? Should i backup some files? i mean files which are responsible for radio?
Thank you again
Click to expand...
Click to collapse
If you download just the radio, it will only install the radio , no a whole ROM so you will not loose anything, yes it looks just like flashing a ROM but if it is just the radio that is all you get ...
okay, i fallowed the steps and i saw " we hacked it" but when i check my radio it still says 2.04. why? i haven't put any file any where, is that okay?
thanks
dawid. said:
okay, i fallowed the steps and i saw " we hacked it" but when i check my radio it still says 2.04. why? i haven't put any file any where, is that okay?
thanks
Click to expand...
Click to collapse
That just installs HSPL so you can install any radio or ROM to your phone, now you have to go get the Radio , download and flash it ...
watcher64 said:
That just installs HSPL so you can install any radio or ROM to your phone, now you have to go get the Radio , download and flash it ...
Click to expand...
Click to collapse
okay i found this http://forum.xda-developers.com/showthread.php?t=611787 but it says flash it using CustomRUU, what does it mean by flashing? just run some exe from the phone? or what?
thanks
dawid. said:
okay i found this http://forum.xda-developers.com/showthread.php?t=611787 but it says flash it using CustomRUU, what does it mean by flashing? just run some exe from the phone? or what?
thanks
Click to expand...
Click to collapse
Ok, download the radio of your choice, that is compatible with your phone, extract it to a folder. There is a link on the radio page to download the CustomRUU which is the file you run on your PC ..
Put CustomRUU.exe in the same folder as the radio rom , the nbh file, and then run it, your phone must be connected via usb of course ....
watcher64 said:
Ok, download the radio of your choice, that is compatible with your phone, extract it to a folder. There is a link on the radio page to download the CustomRUU which is the file you run on your PC ..
Put CustomRUU.exe in the same folder as the radio rom , the nbh file, and then run it, your phone must be connected via usb of course ....
Click to expand...
Click to collapse
Thanks, but when i was doing HardSPL there was drop down list and i have chosen from there the first one 2.08 , does it mean that i can only flash 2.08 radio? or can i flash this one: Leo_RADIO_15.37.50.07U_2.10. 50.08_2 ** (from KR_1.74.911.2): 4Shared - RS (Mod edit - added 04/21/10 by Digital Outcast)
Thanks for your patience
anyone? come on, don't want to brick my phone
dawid. said:
anyone? come on, don't want to brick my phone
Click to expand...
Click to collapse
You chose 2.08HSPL?
if you did that is good ...
All this does is allow you to flash NON-model specific ROMs and Radios to your phone ...
It just bypasses the vendor check ..
It is just the boot loader, has nothing to do with what version of ROM/Radio you can flash ...
So which radio should i use?
dawid. said:
So which radio should i use?
Click to expand...
Click to collapse
Try the 2.10.50 , I have good luck with the 2.12.50...
You are in the UK right?
If so start with the 2.10.50 and see how it does
Thank you You are life-saver ^^
Every thing works fine
Thank you again
You can choose any radio you want.. my case i also chose that one to boot android test.
Related
I currently have a Verizon Wireless fully flashed to cricket XV6800. I decided to know about hacking the Mogul so what I try to do was Look up WMDC 6.1 and apply it to my phone. When i did this the screen stopped at 11%. I took out the battery and tried to turn it on and i get a Red, Green, and Blue color on the start up screen. The words that are on the phone are TITA100 SPL-1.20.Olipro and on the bottom it says USB when connected and Serial when not connected. I looked every where to and figure it out how to get my phone back to the same way. I downloaded so many programs like Titan Unlocker, Titan exitbl, but all these programs do is say my phone is not connected when it is connected. I hear the Sound when the connection for the USB is connected and disconnected. What can i do Will i ever get my phone back to the same state that it once was. I was wondering also that since my phone was flashed that the software will be erased. Is there any way that I can get my Cricket Service. By the way before i did all the hacking what i did was back everything up on the memory card. Is there a way I can restore that through the phone even though i cant access the menu?
I'm going crazy--Thank you for your time to read and for those who can give me some word of advice or some way that my problem can be solved.
Thank you
if u are using xv6800.. i believe u have to install bootloader 2.40 or 2.47.. maybe that might be the problem when installing wm6.1
First, your phone is not bricked.. bricked means broken.. unfixable.. a brick!
You also need to let us know what you software you want to run... DCD 3.2.6?? WMDC 6.1 is Windows Mobile Device Center.. it's not a rom?? So I dont know what you tried to flash.
You need to read the instructions!! Sounds like You upgraded your rom (or tried to) with a non compatible bootloader.. if you dont want to bust your $200 - $500 phone perminently.. you should read the directions twice.. (I read them 4 times, then asked questions before the first time I flashed mine)
When you plug in the device and hear the usb sound.. check device manager.. make sure you see a usb device.. Your OS shoul have installed drivers... Then try the info below.
scrosler said:
1. Download OliPro 2.40 and run it. Ignore the part that asks you to verify the Active Synch connection. Its not needed for anything but a connection confirmation.
2. After running OliPro 2.40 you should be stuck at the three color bootloader screen, Like you are now. If not hold Camera and Power and use stylus to put phone in bootloader. Make Sure it says OLIPRO 2.40 for the version on the bootloader. If not then re-run oliupro and make sure to follow the directions. Especially noting that it asks you to disconnect then reconnect the device.
Click to expand...
Click to collapse
After that you can Flash a Radio, then a rom (I recommend the SD method)
And the versions in my signature.
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
You should also read this WIKI
http://wiki.xda-developers.com/index.php?pagename=TitanProblems
If you cant flash SPL 2.40 you will need to flash back to a ROM compatible with SPL 1.20
Read here: http://forum.xda-developers.com/showthread.php?t=392133
I'd try to grab one of thoise older Roms and flash using SD card method.
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
And dont forget to install carrier cab.
I can't seem to connect my xv6800 to the computer so I can run that program.
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
loc37 said:
I plug it in and the sound comes up and I run the program but it says that it can't copy to device.
Click to expand...
Click to collapse
Then you need to get a Rom and radio compatible with SPL 1.20.. You'll need a SD card thats Equal to or less than 2GB (NON SDHC)
Check the compatibility here: http://forum.xda-developers.com/showthread.php?t=392133
Read the instructions for flashing this here:
http://wiki.xda-developers.com/index.php?pagename=TITAN_GettingStarted
Check the Flashing with a SD card section.
Process is the same for the radio and the rom.
I cant seem to find an available rom that you need though.. I'll post back when i do.
Unless someone else has a trick for you...
You can also try a another machine that may recognize your phone.
What did you actually try to flash your phone with, and how did you do it.. this is important to help you.
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
loc37 said:
okay so what I did was cook up a ROM and then added the Radio 3.37 from alltel on it. I restated the phone and waited the windows mobile 6.1 load screen did not change I moved my keyboard and the sound functioned. I did a restart a hard reset everything I believe it is something with the rom. Any suggestions?
Thanks
Click to expand...
Click to collapse
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
im1badazchick said:
Hello loc...try here>>>>http://www.jrstreet.com/flash/burgertime.htm it's a tutorial made by burgertime from howard forums in the cricket section and it's a vid so you can just got through the steps if you get confused..i'm with cricket as well...try here for mms settings that will get your pic/vid messaging working if you have the software installed>>> http://forum.ppcgeeks.com/showthread.php?t=25859 and here is a rom for cricket if you dont wanna try and cook your own just yet>>> http://forum.ppcgeeks.com/showthread.php?t=18836 i love the new dcd 326 which is what i use but in order for me to get my pic/vid messaging working i had to include an oem version of arcsoft when i cooked my rom and vetvito's rom includes everything that you would neeed so you only need to put in the correct seetings plus you need the correct bootloader(olipro 2.40 or nuespl 2.47) and a radio 3.35 or higher...thanks guys and i hope everyone enjoys the weekend and loc i hope that you get it working...by the way loc there is a cricket forum http://howardforums.com/forumdisplay.php?f=336 and a sub forum for pda's that are flashed to cricket
Click to expand...
Click to collapse
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
loc37 said:
Okay what i have done now is loaded my own personal ROM and then added 3.42.02 Radio to it. The only problem with that is that it keeps restarting and restarting its really weird. Is there any way that i can fix that?
Thank you
Click to expand...
Click to collapse
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
im1badazchick said:
do you have one of the correct bootloaders? because just flashing to a custom rom and adding a new radio doesn't give you the bootloader that you need so you have to have that too...you can check it by holding down the power button, the camera button and inserting your stylus into the soft reset hole at the bottom of the phone and to get back out of it just do a soft reset but it needs to be be either 2.40 or 2.47 not 1.20 or anything else
Click to expand...
Click to collapse
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
flyers2114 said:
......flash a stock pre-gps rom and then upgrade the bootloader to 2.47........then flash whatever you like....
Click to expand...
Click to collapse
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
Usually that means you have the wrong build of MSVC installed use build 19209...
loc37 said:
Okay I solved that problem but now when I click on the settings option on the menu my phone freezes. What can be the cause of that? Did I cook the ROM wrong?
Thanks
Click to expand...
Click to collapse
if you now have the correct bootloader and radio...try flashing with a pre-cooked rom like dcd 326 or the rom from the links that i gave you...the popular one was the black pill and there is one that's specifically for cricket
do I just google that build number or is there a specific program I should download?
Thanks
loc37 said:
do I just google that build number or is there a specific program I should download?
Thanks
Click to expand...
Click to collapse
LOL..no if you lookk about five post up you will see DCD 326 and as for the other from vetvito it was in one of the links that i first posted for you
loc37 said:
When I turn off my phone it says 1.20. What can i do to change it? What software should i Download?
Thank You very Much
Click to expand...
Click to collapse
Did you read any of my posts...
Hrm.. could have sworn I addressed this already.
x51 said:
You can get the SPL 2.40 here:
http://www.lifesnotsogood.com/dcd1182/titan/spl/
Click to expand...
Click to collapse
x51 said:
Then from within Windows Mobile (on your device) Upgrade bootloader to 2.47 (Available from the same link as 2.40 above)
Then flash the radio and rom version I have in my signature.
Click to expand...
Click to collapse
I included links, and all the information you would need.. (Like the Rom/Radio/SPL compatibility list) yet you didn't read it.
I spent time finding those links, downloading a rom.. cooking it for you, and uploading it to my webserver so you can download it.
x51 said:
Download DCD 1.6.10 and flash it to your device with the SD card method (Instructions and links in my previous Post) I couldnt find the rom, but I downloaded the kitchen and cooked a rom that should work for you.
Download it from my webserver here:
http://x51.nx-1.com/TITAN/Roms/
Remember you need a proper SD card for this.. if you don't have one, you'll need to buy one.
After flashing this rom.. Assuming your radio is compatible... You should boot into the OS (forget making calls or getting data connection) Just download SPL 2.47 and execute it on your device.. once the SPL is upgraded, Flash the newest Radio, flash the newest rom, run the carrier cab, install aplications..
Let me know if you run into trouble.
Click to expand...
Click to collapse
I also explained that once you boot into windows with that rom, you need to upgrade your bootloader to 2.47 (with instructions) and then your radio, and then rom.
The path was simple..
Flash dcd 1.6.10 (compatible with SPL 1.20) so the phone will boot
Upgrade SPL (bootloader to 2.47)
Flash new radio (3.47.50)
Flash new Rom (3.2.6)
Run carrier cab.
If you are still asking about where to get the (SPL) bootloader.. I guess I cant help you....
Hi guys
I decided to get [ROM][WWE][9.Mar.2010]Leo lite 2.10/1.66 base (5.2.21895) 576 ram and got HSPL along with the 2.07 radios for use with 2.1
But I thought I could install the radios after flashing the rom, and now it wont boot up..
Is it bricked? Is there any way I can repair this?
I'm so worried right now
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
lapingris said:
Hi guys
I decided to get [ROM][WWE][9.Mar.2010]Leo lite 2.10/1.66 base (5.2.21895) 576 ram and got HSPL along with the 2.07 radios for use with 2.1
But I thought I could install the radios after flashing the rom, and now it wont boot up..
Is it bricked? Is there any way I can repair this?
I'm so worried right now
Click to expand...
Click to collapse
what radio have you flash???
rom with 576 Mb request radio 2.07 on higher,
but not last radio 2.09
If I read this right he hasn't flashed the radio at all so has a generic ROM radio. Its not a critical problem by any means and his phone will be up and running in no time.
leoni1980 said:
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
Click to expand...
Click to collapse
fantastic, thanks alot
leoni1980 said:
If I read this right he hasn't flashed the radio at all so has a generic ROM radio. Its not a critical problem by any means and his phone will be up and running in no time.
Click to expand...
Click to collapse
then to be enough a sofreset
Thank You
This just solved my problem also. Thanks dude.
Daz
HD2 is extremely hard to brick but one you get it right, it gets as hard as a brick lol!
No seriously, as long as one can boot the HD2 in the "boot loader" mode (RGB color stripes) one can recover from any situation known to mankind
Cheers and enjoy your HD2
Faisal.
leoni1980 said:
Take battery out, hold volume down whilst booting to enter bootloader. Connect to pc, install correct radio. You may need to drag the .nbh into the same folder as customruu. copy customruu.exe from rom you downloaded if you dont have it included with the radio you download. you need the .nbh and customruu in same folder.
Then just run it and everything will be super.
Click to expand...
Click to collapse
hey im so new to this there is everychance i will make my hd2 explode, although i am taking heed of everything i read, i seem to be having problems simply installing 'radio 2.07' so that i can install android froyo, which im yet to establish where to get it from , ive updated my spl and all is ok so far. THe radio file i have is RUU_signed.nbh and i just installed hspl3 which worked grand ^^. the nbh radio file however, isnt recognised by either my pc, or my phone :/ really sorry if im asking dumb questions but i have come this far without asking one and im not coming up with anything with regards to the installation of the radio file :/ cheers for help if you can .
fishegg70 said:
hey im so new to this there is everychance i will make my hd2 explode, although i am taking heed of everything i read, i seem to be having problems simply installing 'radio 2.07' so that i can install android froyo, which im yet to establish where to get it from , ive updated my spl and all is ok so far. THe radio file i have is RUU_signed.nbh and i just installed hspl3 which worked grand ^^. the nbh radio file however, isnt recognised by either my pc, or my phone :/ really sorry if im asking dumb questions but i have come this far without asking one and im not coming up with anything with regards to the installation of the radio file :/ cheers for help if you can .
Click to expand...
Click to collapse
First, confirm that your spl is now 2.08.hspl (check in bootloader mode)
Next you need to flash the new radio file to your device. Read this - http://forum.xda-developers.com/showthread.php?t=609477. You need to either have the ruu_signed.nbh file in a folder with the CustomRUU.exe and then run the exe or else rename to LEOIMG.nbh and flash via the sd card.
tks a lot bro... you made my day... really apreciate it..
A lot of users are developing their own WM6.5 ROMs
My question is: to flash this WM version, do I have to do this:
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
(OPTIONAL, better to skip it! step 7. if you only want to test the sspl try flashing the attached splash screen by running ROMUpdateUtility.exe from flash-splash-niki)
8. you can now flash the hardspl-1.15mfg-nike.nbh by running ROMUpdateUtility.exe from flash-uspl-niki
9. after installing the hardspl you can flash any rom (rom cook project
Click to expand...
Click to collapse
Thank you veru much.
Maxxd01 said:
A lot of users are developing their own WM6.5 ROMs
My question is: to flash this WM version, do I have to do this:
Thank you veru much.
Click to expand...
Click to collapse
exactly....but u have to have hardspl 1.22 instlled on ur device to be at the safest side.
deepankerjha said:
exactly....but u have to have hardspl 1.22 instlled on ur device to be at the safest side.
Click to expand...
Click to collapse
Of course, but I still have to run sspl 1.16 on the device ?
Maxxd01 said:
Of course, but I still have to run sspl 1.16 on the device ?
Click to expand...
Click to collapse
Yes! First, you need sspl 1.16, then hspl 1.22!
dmx_nigga said:
Yes! First, you need sspl 1.16, then hspl 1.22!
Click to expand...
Click to collapse
I've noticed that a lot of users ask me to help because it didn't work for them, I always asked what they did and the most of them did everything the correct way but still it didn't work, They told me they used sspl 1.16 and then hardspl 1.22.
I always suggested to start all over and try it with 1.15 hardspl, and for ALL the people I suggest to do that, it worked.
Plse keep that in mind.
Greetz,
Rataplan said:
I've noticed that a lot of users ask me to help because it didn't work for them, I always asked what they did and the most of them did everything the correct way but still it didn't work, They told me they used sspl 1.16 and then hardspl 1.22.
I always suggested to start all over and try it with 1.15 hardspl, and for ALL the people I suggest to do that, it worked.
Plse keep that in mind.
Greetz,
Click to expand...
Click to collapse
But if I already have harspsl 1.22 (or 1.15) should I do it again ? (after sspl 1.16 run)
Maxxd01 said:
But if I already have harspsl 1.22 (or 1.15) should I do it again ? (after sspl 1.16 run)
Click to expand...
Click to collapse
If it works for you it shouldn't be a problem, I myself did it also with 1.22 but for some people or phones the 1.15 work's better, still don't no why.
I just wanted to make a note in this thread for the people who don't succeed with 1.22
Greetz,
Hi.. I want to ask some..
If want to flash my nike (5500), from original WM 6.0 to 6.5, should I change my radio version? It's still confused me. I red in one thread that it need radio version 1.65 or higher. But in another thread, after hardSPL, I can go install ROM without change my radio. Which one to follow?
Thanks before for response..
fastbus said:
Hi.. I want to ask some..
If want to flash my nike (5500), from original WM 6.0 to 6.5, should I change my radio version? It's still confused me. I red in one thread that it need radio version 1.65 or higher. But in another thread, after hardSPL, I can go install ROM without change my radio. Which one to follow?
Thanks before for response..
Click to expand...
Click to collapse
Hi fastbus, it is better to change your radio version because you could lose some funtions such as camera and sound, there are two ways to flash a radio.
1. Flash an original rom, it comes with an radio, after that flash a cooked rom and you will keep the radio from the latest flashed original rom.
2. Just flash the radio after you flashed a cooked rom, flashing a radio is the same as flashing a rom, it is just a bit quicker then a rom because it is a lot smaller.
There is also a 1.71 radio, if you want to flash that one you must have a 1.58 radio, to upgrade the radio to 1.71, it just don't work with an 1.65 radio.
If you are still confused just send me an pm.
Greetz,
Thank you so much Rataplan.. I'll PM you soon, there is some Q again.
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
smerf1 said:
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
Click to expand...
Click to collapse
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
jsmccabe78 said:
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
Click to expand...
Click to collapse
Thank you for replying.
But I don't know which stock ROM to download?
I have found one which flashes HSPL, RADIO and ROM, but it is asking If I would like to download the unbranded version or others.
If I do it your way (number1) that's all I need to do, and It will be all back to stock?
smerf1 said:
...If I do it your way (number1) that's all I need to do, and It will be all back to stock?
Click to expand...
Click to collapse
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
jsmccabe78 said:
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
Click to expand...
Click to collapse
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
smerf1 said:
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
Click to expand...
Click to collapse
I used to have the same question =)
"How the hell do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
ap3604 said:
I used to have the same question =)
"How the help do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
Click to expand...
Click to collapse
Thank you for that
I am from the UK though with an 02 HTC HD2 (Think unbranded as it doesn't say anything on the front except for HTC, unlike the T-mobile one)
I need to send mine back to tmobile and I've reflashed the software and put back on spl. But, will the tmo techs think it's weird when my spl is 2.08 when stock I believe is 2.10 for the upgraded 2.13 rom?
I've tried what people say about renaming the nbh file but my phone doesn't want to flash through the sd card.
So I can just flash any ROM then?
As you have HSPL installed: through USB you can flash almost any ROM (not TMOUS ones)
But if you really want to go to stock:
Download your ROM from HTC Support site
For O2 you will need a branded rom by the looks of it. (This one)
Just try to download, fill in your devices Serial number, it will tell you wether this Rom is Ok or not.
If you need another then search for it....
BTW: Apply HTC hotfixes released after ROM release date, these are not incorporated in the rom you downloaded....
Flash from SD card to completely revert to stock.
smerf1 said:
So I can just flash any ROM then?
Click to expand...
Click to collapse
No, go to the 'Leo official roms' thread, first post, first link, 1.72 folder, look for the rom
RUU_Le2_UK_1.72.206.3_Radio_CRC_Signed_15.32.50 .07U_2.07.51.22_2_Ship.exe
see how it says O2 and UK in the name?
Get that, flash it from USB, then run HSPL2 and choose 1.66.0000
SD card flashing is soooo old fashioned, hehe.
Done, all stock.
hi,going to attempt a new rom update
Energy.Leo.21916.Sense2.5.MaxSense.Nov.16
it also says i have to put this radio version on
Leo_RADIO_2.07.50.27_2
whats first the rom or the radio rom ?
and do i install both with custom RUU
kenf2210 said:
hi,going to attempt a new rom update
Energy.Leo.21916.Sense2.5.MaxSense.Nov.16
it also says i have to put this radio version on
Leo_RADIO_2.07.50.27_2
whats first the rom or the radio rom ?
Click to expand...
Click to collapse
doesnt matter. the only difference is that if you have a ..51.. radio on when you flash that rom, (or any other rom that requires a ..50.. radio) and you flash the rom first, the phone wont boot until you flash the radio.
But it WILL enter bootloader and let you flash, so its not a problem, it just scares people a little.
Once you HAVE a 50 radio, if you flash a different rom, it WILL boot without needing to change the radio.
and do i install both with custom RUU
Click to expand...
Click to collapse
yes, but not both in the same folder, one .nbh file and one customruu per folder.