Related
Okay Now I KNow Im New So Plz Dont Flame. I Tried Searching But Couldnt Find A How To. Once I Flash the new rom the phone will automatically reset but i get stuck at the new splash screen.i was told i should probably install a new radio rom. which i have. but i dont know how to flash just the gps. anybody help please.
You must install by sd method
http://forum.ppcgeeks.com/showthread.php?t=33857
Okay, lets start from the top. Did you flash it with a new SPL first? What ROM did you use? And what radio did you use? If you don't have the correct radio, a reboot loop will occur, which means you just need to flash it with a GPS enabled radio like the newer 3.42.50. That will overwrite your current radio and bring you back to speed.
are you saying the only way to flash the radio is to use the sd card?
wagonis said:
Okay, lets start from the top. Did you flash it with a new SPL first? What ROM did you use? And what radio did you use? If you don't have the correct radio, a reboot loop will occur, which means you just need to flash it with a GPS enabled radio like the newer 3.42.50. That will overwrite your current radio and bring you back to speed.[/QUOTE yes i followed the directions step by step in ryan moguls post yesterday. im using the 3.42.50 eadio from ryan and the titan v2.2 heavy rom.any ideas
Click to expand...
Click to collapse
Probably a bad flash. Flash the ROM again. If your phone is unlocked with spc code all zeros and you have olipro 2.40 bootloader and GPS radio 3.35 and up you should have no problems with Custom Titan ROMs. After you re-flash hard reset and pull the battery for a couple minutes.
Hello there,
In order to run android on my HD2 i need to have at least 2.08 radio, but currently my radio is lower than that. I am completely noob in this category, I've been always using nokia's so i know how to change the firmware in it, but now I'm the user of windows mobile. Could you tell me how to change the radio so i could run the android properly?
My current specs:
HTC HD2 UK T-Mobile (448 RAM)
ROM version: 1.43.110.2 (70315) WWE
Radio version: 0.04.50.22_2
Protocol version 15.26.50.07U
SPL-1.42.000
I don't want to brick my phone, I know that there is an update on the htc site but it's 1.72.110.4, i've seen somewhere that this rom upgrade gives 2.07 radio.
So what should i do? Should i ugrade my rom using t-mobile rom from htc site or should i use something else to just upgrade radio?
Thanks
hspl3 from my sig, then find radio in the radio thread in rom development, , no need to flash a rom to change radio, just flash the radio, no hard reset, no loss ofcurrent data.
samsamuel said:
hspl3 from my sig, then find radio in the radio thread in rom development, , no need to flash a rom to change radio, just flash the radio, no hard reset, no loss ofcurrent data.
Click to expand...
Click to collapse
Thank you , but how to install it? Just connect my phone through USB and just follow the steps by clicking next next? Should i backup some files? i mean files which are responsible for radio?
Thank you again
dawid. said:
Thank you , but how to install it? Just connect my phone through USB and just follow the steps by clicking next next? Should i backup some files? i mean files which are responsible for radio?
Thank you again
Click to expand...
Click to collapse
If you download just the radio, it will only install the radio , no a whole ROM so you will not loose anything, yes it looks just like flashing a ROM but if it is just the radio that is all you get ...
okay, i fallowed the steps and i saw " we hacked it" but when i check my radio it still says 2.04. why? i haven't put any file any where, is that okay?
thanks
dawid. said:
okay, i fallowed the steps and i saw " we hacked it" but when i check my radio it still says 2.04. why? i haven't put any file any where, is that okay?
thanks
Click to expand...
Click to collapse
That just installs HSPL so you can install any radio or ROM to your phone, now you have to go get the Radio , download and flash it ...
watcher64 said:
That just installs HSPL so you can install any radio or ROM to your phone, now you have to go get the Radio , download and flash it ...
Click to expand...
Click to collapse
okay i found this http://forum.xda-developers.com/showthread.php?t=611787 but it says flash it using CustomRUU, what does it mean by flashing? just run some exe from the phone? or what?
thanks
dawid. said:
okay i found this http://forum.xda-developers.com/showthread.php?t=611787 but it says flash it using CustomRUU, what does it mean by flashing? just run some exe from the phone? or what?
thanks
Click to expand...
Click to collapse
Ok, download the radio of your choice, that is compatible with your phone, extract it to a folder. There is a link on the radio page to download the CustomRUU which is the file you run on your PC ..
Put CustomRUU.exe in the same folder as the radio rom , the nbh file, and then run it, your phone must be connected via usb of course ....
watcher64 said:
Ok, download the radio of your choice, that is compatible with your phone, extract it to a folder. There is a link on the radio page to download the CustomRUU which is the file you run on your PC ..
Put CustomRUU.exe in the same folder as the radio rom , the nbh file, and then run it, your phone must be connected via usb of course ....
Click to expand...
Click to collapse
Thanks, but when i was doing HardSPL there was drop down list and i have chosen from there the first one 2.08 , does it mean that i can only flash 2.08 radio? or can i flash this one: Leo_RADIO_15.37.50.07U_2.10. 50.08_2 ** (from KR_1.74.911.2): 4Shared - RS (Mod edit - added 04/21/10 by Digital Outcast)
Thanks for your patience
anyone? come on, don't want to brick my phone
dawid. said:
anyone? come on, don't want to brick my phone
Click to expand...
Click to collapse
You chose 2.08HSPL?
if you did that is good ...
All this does is allow you to flash NON-model specific ROMs and Radios to your phone ...
It just bypasses the vendor check ..
It is just the boot loader, has nothing to do with what version of ROM/Radio you can flash ...
So which radio should i use?
dawid. said:
So which radio should i use?
Click to expand...
Click to collapse
Try the 2.10.50 , I have good luck with the 2.12.50...
You are in the UK right?
If so start with the 2.10.50 and see how it does
Thank you You are life-saver ^^
Every thing works fine
Thank you again
You can choose any radio you want.. my case i also chose that one to boot android test.
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
smerf1 said:
I've done a search and I can't find anything for mine.
mine is an HTC HD2 UK/EU 02.
I have flashed HARDSPL, RADIO and ROM, also put android on it.
But I don't like it, so I want it all back to stock.
Any help please?
Click to expand...
Click to collapse
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
jsmccabe78 said:
android doesn't matter.
to return WM to stock either:
1- flash original rom from sd card (will replace hspl, radio and rom) or
via usb (in this order, more or less-- 2c at the end for sure):
2a- flash original radio
2b- flash original rom
2c- use hspl to put spl back on your device
cheers.
Click to expand...
Click to collapse
Thank you for replying.
But I don't know which stock ROM to download?
I have found one which flashes HSPL, RADIO and ROM, but it is asking If I would like to download the unbranded version or others.
If I do it your way (number1) that's all I need to do, and It will be all back to stock?
smerf1 said:
...If I do it your way (number1) that's all I need to do, and It will be all back to stock?
Click to expand...
Click to collapse
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
jsmccabe78 said:
you're welcome and yep, it will bring it all back to stock (i mean, the rom you are going to flash has all the stock stuff- rom and radio- in it so that is what will be on your phone and flashing from the sdcard removes hspl- so all stock!)
Click to expand...
Click to collapse
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
smerf1 said:
Thank you for clearing that up for me.
Any Idea which ROM I will have to use, as I'm sure you can't just use any right?
Click to expand...
Click to collapse
I used to have the same question =)
"How the hell do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
ap3604 said:
I used to have the same question =)
"How the help do I get it back to factory settings?!"
I actually just downloaded the stock ROM from t-mobile. Here's the website for the U.S.A. Hd2:
dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo
Once you download the stock rom you merely plug you phone up to your computer and click on the rom file to go through the steps.
Hope this helps
Click to expand...
Click to collapse
Thank you for that
I am from the UK though with an 02 HTC HD2 (Think unbranded as it doesn't say anything on the front except for HTC, unlike the T-mobile one)
I need to send mine back to tmobile and I've reflashed the software and put back on spl. But, will the tmo techs think it's weird when my spl is 2.08 when stock I believe is 2.10 for the upgraded 2.13 rom?
I've tried what people say about renaming the nbh file but my phone doesn't want to flash through the sd card.
So I can just flash any ROM then?
As you have HSPL installed: through USB you can flash almost any ROM (not TMOUS ones)
But if you really want to go to stock:
Download your ROM from HTC Support site
For O2 you will need a branded rom by the looks of it. (This one)
Just try to download, fill in your devices Serial number, it will tell you wether this Rom is Ok or not.
If you need another then search for it....
BTW: Apply HTC hotfixes released after ROM release date, these are not incorporated in the rom you downloaded....
Flash from SD card to completely revert to stock.
smerf1 said:
So I can just flash any ROM then?
Click to expand...
Click to collapse
No, go to the 'Leo official roms' thread, first post, first link, 1.72 folder, look for the rom
RUU_Le2_UK_1.72.206.3_Radio_CRC_Signed_15.32.50 .07U_2.07.51.22_2_Ship.exe
see how it says O2 and UK in the name?
Get that, flash it from USB, then run HSPL2 and choose 1.66.0000
SD card flashing is soooo old fashioned, hehe.
Done, all stock.
Howdy all,
Had ANdroid on the HD2 and wanting to revert back to the original ROM.
Have downloaded a stock rom (3.14 WWE) and have used task 29 to clean up the phone.
Trying to install the rom gives an error: 209: Invalid Vendor ID.
THe phone shows it get to 1% and then reset itself.
I have tried 1.32 Radio, 1.66 and 2.08, all giving the same result (Except for 2.08 wouldnt even get to 1%)
Completely stuck here...
Any help would be great.
Also, read about flashing from SD, but because i've used task 29 the phone has no ROM to boot to. Plus I couldnt figure out how to extract the RUU_signed.nbh from the original .exe
Maybe i've done something wrong?
Any help would be great.
Cheers
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
kurt-willems said:
Oky, lets start with the beginning.
Error: 209: (Invalid Vendor ID) means that the stock ROM you are try to install isn't the right one. Probably you have a branded device; ore you need to install a otter aria Rom.
Secondly Stock ROM 3.14 isn't compatible with HSPL; so you need to remove it (use HSPL2_RUN.exe to remove HSPL and select SPL 1.66 instead.)
PS, you don't need to install separately a Radio version. Ons you have install Stock Rom 3.14 you will have automatic Radio 2.15.50.14
The important thing is to install a correct stock ROM who match with your device. (witch was your official ROM version?)
Click to expand...
Click to collapse
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
ftosam said:
Sorry i meant SPL.....
Bought the phone from Mobicity and it was imported from Thailand originally....I have previously installed this exact same ROM i am trying to install now....
but after putting Andriod on the device...trying to revert it back is proving impossible.....
I am giving the phone to a friend and thats why i want a stock ROM back on it.....
Click to expand...
Click to collapse
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
kurt-willems said:
Stock ROM 3.14 WWE (3.14.413.2) can't be install on a Thailand Rom version !?
Secondly Task 29 isn't compatible with SPL 3.03 neater.
Thirdly I don't see way you need to revers back to a stock ROM (because you mention that Android was the reason (Android isn't install on your device, but on SD. So it don't change your internal ROM))
Okay; what you can try to do is flashing over SD.
but you need to use a original stock ROM and not the WWE (3.14.413.2) you need the version of Thailand (if this was your original!?) (Asia_WWE_3.14.707.3)
- Download your original stock ROM
- Use WinZip to extract it; and extract the RUU_signed.nbh file
- Rename the .nbh file to "leoimg.nbh" place it on a SD (take a 2GB SD) who was been format (FAT32)
- Shut Down your device, enter your SD, hold volume down button, and shortly press on the power button.
- follow the instructions on your screen.
But like mention early'r you need to use the right stock ROM version!
Click to expand...
Click to collapse
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
ftosam said:
Thanks! that worked, but now it is stuck in Taiwanese ? is there a way to change it to english, as when i purchased the phone it was all in english?
Click to expand...
Click to collapse
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
kurt-willems said:
Based on the fact that stock ROM 3.14 use SPL 3.03 who isn't compatible with HSPL you can't change your stock ROM version by using HSPL.
But if you used the GoldCard technique you can install a otter stock ROM version.
Click to expand...
Click to collapse
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
ftosam said:
HSPL is not on my phone, only SPL 1.66 ...... I had to flash using USB as SD card way would not work .....
There must be a way of doing this only because when i received my phone it was in english so i really dont understand,,,,i just want a stock ROM in english.....
Click to expand...
Click to collapse
Sorry sir, I can't follow you
You mentioned to have install Stock rom 3.14 correctly; but now you mention to have "SPL 1.66"
If you have install stock ROM 3.14 correctly like mention before you will have SPL 3.03!
And like I mention before if you will install latest stock ROM 3.14 WWE (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard technique!
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
ftosam said:
We dont have spl 3 could that be why the other ROMs woulnt work?
How do i get Spl 3?
Click to expand...
Click to collapse
When you install stock ROM 3.14 correctly it will upgrade automatically your SPL version to 3.03!
But it seems fore one ore a other reason it didn't do it correctly.
Connect your device by active sync, and run "RUU_Leo_S_hTC_Asia_WWE_3.14.707.3" as administrator, to install it again.
I don't know from where you get the original stock ROM; but to be sure download it again: RUU_Leo_S_hTC_Asia_WWE_3.14.707.3
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
ftosam said:
I wont work it still gives me the same error as before invalid vendor .....
I dont know how to fix this i just want a stock ROM in english....
Click to expand...
Click to collapse
ftosam said:
I have no idea why it is still not working getting the same error as before, the only ROM that will install is the one that is not in english
Click to expand...
Click to collapse
Sir did you listen/follow my previous instructions!!!???
You can't install a WWE stock ROM (3.14.413.2) on your Taiwanese device (x.XX.707.x) you need to use the GoldCard!!!
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
ftosam said:
It didnt work, it still gives error and i tried the goldcard way but it doesn't load anything i quickly flashes a screen that says loading and then it goes back to the boot loader and just stays there.....
Click to expand...
Click to collapse
I have the impression that you are doing something that's isn't correct.
Lot of peoples who I know have used the Goldcard technique; and all without issues.
Ended up getting the goldcard to work (Used a different SD Card)....
However it STILL comes up with the same error. (If I try flashing wwe Asia from the sd card, it says " Not Allowed")
We have previously used all sorts or ROMs on this phone... but the same ROMs now seem to be giving this Vendor Error... It just doesnt make sense...
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Don"t use stock ROM 3.14 if you will install/use NAND!
Stock ROM 3.14 isn't compatible with HSPL; and you will need HSPL for NAND.
Just install/upgrade your Radio version on your 1.66 stock ROM.
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
XFarellX said:
hmm but i want to have a 3.14 rom version costum or stock but i dont know how to do it. Could you help me ? How can i upgrade radio version ?? If i do this can i instal NAND Android ?
Click to expand...
Click to collapse
Like I mentioned before, if your attention is to use/install NA ROMND.
DON'T use stock ROM 3.14! NAND needs HSPL, and this isn't possible in combination with stock ROM 3.14!!!
Just upgrade your radio.
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
cymagnus said:
5. Flash any 3.14 custom ROM available at this wonderful site.
Click to expand...
Click to collapse
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
cymagnus said:
Yeah u should just upgrade your radio. no need to upgrade to 3.14.
I do not see the necessitiy to upgrade to 3.14 if you want to run Android NAND.
What you need to do is to start all over again.
1. Extract RUU_unsigned.nbh from stock 1.66 ROM, rename as leoimg.nbh, copy this file to the root of your SDCard.
2. Pop SDCard into device, Activate bootloader and it will load back your device to 1.66 stock condition.
3. HSPL your device again using HSPL3.
4. Upgrade your radio to whatever your liking (e.g 2.15 etc)
5. Flash any 3.14 custom ROM avaialble at this wonderful site.
Click to expand...
Click to collapse
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
XFarellX said:
Ok, but in stock ship i have a RUU_signed.nbh not unsigned
Click to expand...
Click to collapse
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
erwinpiero said:
Finally got an answer, so HSPL only not recommended for stock 3.14 ROM, but for custom ROM it's doesn't matter. Then we should use SSPL to flash this custom ROM right?
Thanks
Click to expand...
Click to collapse
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
XFarellX said:
I have a very big problem. Yesterday i decidet to instal NAND Androin into my HTC HD2. In first step on my 1.66 stock ROM i instaled this http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893 (HSPL3 and choose 2.08.0000). Everything flashing great but after thad i sow that i have a 2.07.51.22_2 radio version... so i decided to install 3.14 stock rom but i cant I was trying remove hspl but in boot screen i only seen "loading..." (my 2GB SD card was formated in FAT32 and i extracted file from ship but it doeosn't work). My question is what should i do to upgrade my phine to stock 3.14 ? Please help me
Sorry for my english
Click to expand...
Click to collapse
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
silverwind said:
The only problem using SSPL is that you cant flash radio and you cant do task 29
As suggested in forums, you have to do task 29 before flashing rom in order to clean up the memory. If you use SSPL, you cant do that. So there is possibility that you will find bug(s) originating from previous rom.
Cheers...
Click to expand...
Click to collapse
Ow i see, thank you for your clear explanation Mas, yes when we had HSPL then we can play a lot and it's a must to use task29. My misunderstanding too, if we flash HSPL then we could flash any ROMs, so we don't need SSPL. But still HSPL was not recommended for 3.14 stock ROM. I hope my conclusion is right.
Thank You
dude u need to go to the bootloader power and vol down.. and then flash... not the usb flasher in magldr.. hit thanks if this was the problem
erwinpiero said:
Yes you are right, maybe cymagnus mean was RUU_signed.nbh
Click to expand...
Click to collapse
Opps.. yeah it's RUU_signed.nbh. Got mix up with Nokia stuffs. lol.
ClydeB1 said:
Firstly, 2.08.0000 is NOT hspl, it is a stock spl version. You need to select 2.08.hspl when running HSPL3. To flash a new radio there is no need to install the whole rom, just download and flash the radio. Click on the link in my signature for my radio and there are plenty of standalone radio roms there. Flash the same way as a rom (as long as you have hspl installed).
If you are wanting to go Android don't install 3.14, just do the abovementioned items. If you really do want to go stock 3.14 rom, then you can do this once hspl is installed BUT it is not recommended and it is better to use the Goldcard method.
Click to expand...
Click to collapse
Thanks a lot !! Could you tell me how to instal stock 3.14 step by step ? I feel green in this topic
Stock 3.14 ROM won't be a good idea. There are many beautiful ROMs over there which give you the freedom to enjoy 576MB of RAM with proper radio versions. Stock is no good.. Be careful of what radio version you have while flashing ROMs as incompatible radio may prevent the phone from booting. Before installing android, check the compatible radio versions and install one before doing anything Check this for more info step by step http://forum.xda-developers.com/showthread.php?t=732380
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Okay! Download the 3.14 ROM from correct HTC website for your country. Once downloaded, open with WinRAR and extract RUU_signed.nbh to any folder. Rename it to LEOIMG.nbh and copy it to the root of your memory card. Make sure your memory card is formatted with FAT32 partition method. Insert the card in your phone (while phone is switched off) and hold the 'Volume down' button. Press power button while the Vol down button is pressed. Your phone will enter bootloader and you'll be able to flash the ROM. By this method, even if you have HSPL installed, it will be overwritten by stock SPL 3.03
Happy flashing! Dont forget to backup your personal data!
XFarellX said:
Thanks, but i want install stoc rom 3.14 and i don't know how to do it because i have spl 2.08.0000 instaled via HSPL3. Someone can help me ? I don't wanna install android or any costum rom. Please help... i need stock rom 3.14
Click to expand...
Click to collapse
Will you make your mind up. Firstly you wanted Android installed, then it was 3.14 custom or stock and now it is only 3.14 Stock ROM.
Thankfully you have the SPL of 2.08.0000, which means that HSPL has been removed.
Go to HTC's website and download the 3.14 ROM with your phone's serial number. If you are allowed to download the file, then there should be no problem in running it from your PC. If you get a 'you are not allowed to download this file', then you have to use the GoldCard method.
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
XFarellX said:
Whats wrong... I download from HTC site stock rom 3.14. Program found my phone and current instal version (1.66), when i click update status bar is still on 0% (after 20 minutes i desconect phone and turn on - everything works great but in 1.66 rom :/). After that i was trying updated via gold card method ( i prepared 2GB micro SD card - format in FAT32 and copy rename nbh file) but when i'm swith on my HD2 holding volume down button on the screen i can see "loading..." and nothing more
Click to expand...
Click to collapse
Did you downloaded the right stock ROM by using your S/N?