Related
Hi, I`m having some serious issues when trying to flash my HERMES. As far as I can tell, it is SIM Unlocked, but not sure if it`s CID unlocked. it`s SPL-1.06, and I can't seem to get it to install HARDSPL. I have tried, and tried and tried and tried. I've tried flashing VIA SD-CARD, but it just says "LOADING" and displays a number at the top, then goes back to the bootloader screen.
When I am flashing via the wizard, it'll go into the bootloader screen, and the wizard will fail saying it cannot connect "CONNECTION ERROR"...
I am at my wits ends, and cannot figure this out for the life of me. I have had 3 TYTN's now, and this one has gotten the better of me. I was able to flash both of my other TYTN's, but unfortunately I got the WSD, and cannot repair them, they are both beyond my technical knowledge of repairs...
PLEASE PLEASE PLEASE PLEASE PLEASE help....
Trying so hard to get this done...
Copied the .nbh (ren to hermimg.nbh) to my SDCARD and reset into bootloader, as I said, it just came up "LOADING" then back to bootloader....
I'd rip my hair out if I had any..
any help would be appreciated..
***UPDATE - I don't know what the hell happened, but suddenly, this bugger is letting me flash VIA SD. It's a damned miracle!
Just out of the blue, it asked me to flash via SD in the bootloader. Thank goodness! After 3 hours, I finally got it working..
Cheers all!
if you need more info, just ask, I will provide all I can....
need help ,during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
IPL 1.01
SPL 2.03
my device freezed at loading screen .
Now ,when i tried to rom upgrade in bootloader mode , using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
Edit/Delete Message
TVincent0621 said:
need help ,during the upgrade it was around 15% that the upgrade utility show the error that device cannot connect.
my device is bricked now
IT is not KITL enabled
IPL 1.01
SPL 2.03
my device freezed at loading screen .
Now ,when i tried to rom upgrade in bootloader mode , using any ruu (ruuwraper,.....) it only shows 1% and my device reboots and ....
Edit/Delete Message
Click to expand...
Click to collapse
Okay, when you're in the "bootloader" method, have you renamed the file that you're trying to flash "HERMIMG.NBH".
also, try to use the "stripped" AT&T ROM first, see if that'll help correct the issue.
Did you flash that first before you attempted to flash a different ROM on your Hermes? I've read in many different posts that it is highly suggested to flash that first then flash your ROM to your Hermes.
Should always flash via SD-Card, not recommending flashing via USB Wizard.
Try the "stripped" rom first, on a formatted (FAT32) microSD card, and see if that helps.
Cheers
i have download the "stripped" AT&T ROM ,it also the same ,when using USB method ,it stuck at 1% and my devide reboot .
when using SD card method ,it show (loading ...) about 2 second ,then it will back to tri-color mode there .
TVincent0621 said:
i have download the "stripped" AT&T ROM ,it also the same ,when using USB method ,it stuck at 1% and my devide reboot .
when using SD card method ,it show (loading ...) about 2 second ,then it will back to tri-color mode there .
Click to expand...
Click to collapse
I had that exact same problem.
I noticed that I hadn't named the file properly.
It's HERMIMG.NBH I kept putting in HERMING.NBH. It's kind of funny, but it's an easy mistake. When you boot with the "HERMIMG.NBH" it should flash. I used the HARDSPL V7, which can be downloaded at http://forum.xda-developers.com/showthread.php?t=296722, which is a "sticky" for this forum. Try flashing that one. Also, double check your .nbh file, make sure it's HERM IMG not HERM ING
That was the problem I was having too, it would just show "LOADING" and a bunch of numbers then drop to the bootloader... Then all of a sudden... "POOF" it worked, after I double checked the file and noticed my spelling error.
Now, if you have that fixed and still getting the error, it might be something else. I'm not sure how to exactly fix that, but as I said, mine was just a minor spelling error.. The exact spelling that I have, don't know if it is case sensitive, is "HERMIMG.nbh"
if it is case sensitive, that could also be a minor issue.
try it, if it works, then bingo, you're back in business, if not, then I'm not sure how else to fix it.
Cheers!
>.< ,now i type correct word "HERMIMG" ,it shown loading ... and (00068002) on the top of loading ... ,now it ,have better improvement ,it show loading ... for about 5 second only jump back to tri-color there ,izit this is the normal procedure ?
TVincent0621 said:
>.< ,now i type correct word "HERMIMG" ,it shown loading ... and (00068002) on the top of loading ... ,now it ,have better improvement ,it show loading ... for about 5 second only jump back to tri-color there ,izit this is the normal procedure ?
Click to expand...
Click to collapse
Okay, we're getting there. But still a long way off from it working as it should.
Okay, do you know if your phone is HARDSPL?
If you haven't already HARDSPL your phone, you should download that and try to flash that onto your phone.
Also sounds like it isn't SUPERCID. You'll have to CID unlock your phone, which is a good possibility as to why it isn't accepting other ROMS.
If your phone responds to the flash wizard when you download a ROM then get the SUPERCID and try to flash that one first, then move on to the HARDSPL.
For the SUPERCID, and my previous post has the HARDSPL.
At least the situation is improving, and your phone is starting to respond.
We'll get it working!
The HARDSPL you have to follow most of the "manual" installation instructions, and copy, then rename the "HermesUnlocker_v3a.nbh" file.
Try to flash that file, and we'll see if we can get it going.
Cheers
i think my phone not yet HARDSPL ,can you guide me to do this ?
i search the web ,it show me to here "http://forum.xda-developers.com/showthread.php?t=296722" izit correct ?
and also superCiD:
1. Unrar RUU_HERM_Unlock_v3a.exe
2. Unrar RUU_Inside.exe
3. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer
or format it from your computer using a card reader (in some cases format doesn't work).
4. Rename HermesUnlocker_v3a.nbh to HERMIMG.nbh and copy it to the FAT32 formatted microSD card.
5. Insert microSD card on your phone
6. Transfer SSPL/SSPL-HERM.exe to your phone and run it
7. Confirm flashing on screen by pressing the power button.
how i wana do the step 6 ,my phone is stuck now ,i cant log in at all >< ,but i try step 1-5 ,it also shown the 00068002
TVincent0621 said:
i think my phone not yet HARDSPL ,can you guide me to do this ?
i search the web ,it show me to here "http://forum.xda-developers.com/showthread.php?t=296722" izit correct ?
and also superCiD:
1. Unrar RUU_HERM_Unlock_v3a.exe
2. Unrar RUU_Inside.exe
3. Empty (erase the contents) of your microSD card from the Windows Mobile file explorer
or format it from your computer using a card reader (in some cases format doesn't work).
4. Rename HermesUnlocker_v3a.nbh to HERMIMG.nbh and copy it to the FAT32 formatted microSD card.
5. Insert microSD card on your phone
6. Transfer SSPL/SSPL-HERM.exe to your phone and run it
7. Confirm flashing on screen by pressing the power button.
how i wana do the step 6 ,my phone is stuck now ,i cant log in at all >< ,but i try step 1-5 ,it also shown the 00068002
Click to expand...
Click to collapse
Attached is the HARDSPL file, already named "HERMIMG.nbh, which you just need to copy onto your SD-CARD.
When those are successful you will be able to flash any rom you want (provided it is as Hermes ROM)....
But as of right now, your phone is NOT bricked. It just currently has no ROM on it.
Have you tried to HARD-RESET your phone?
That's the two soft keys at the bottom of the phone, above the SEND and about the END keys.
Press and hold BOTH of those, then press the "RESET" button on the bottom of the phone. That'll hard-reset the phone.
I'm not saying to do that, just asking if you've tried that option yet.
Good luck, let me know how it's going.
Cheers!
my problem has solve now ,i try to install original rom for the phone ,it work ^^ ,thank for your help ,nice to meet you my friend from oversea .
Now i afraid to change any new rom >.<,can you guide me the best way to upgrade the rom ?so that i wont face the same problem and also brick my phone .
TVincent0621 said:
my problem has solve now ,i try to install original rom for the phone ,it work ^^ ,thank for your help ,nice to meet you my friend from oversea .
Now i afraid to change any new rom >.<,can you guide me the best way to upgrade the rom ?so that i wont face the same problem and also brick my phone .
Click to expand...
Click to collapse
Glad the problem was solved, and very happy to help!
Absolutely I can.
First thing is first, we have to SUPERCID unlock your phone, and we have to HARDSPL your phone.
Run the HARDSPL first, because the wizard will actually temporarily superCID your phone, so that you can install the HARDSPL, which will help prevent you from ever bricking your phone.
with your phone plugged in for activesync, you have to run the "autounlocker.bat" file in the SUPERCID. What this will do is make your phone accept other custom ROMS, whether it is from another carrier, or one of the ROMS that someone has developed on here.
After this, I would highly suggest, that if you ever flash your phone again with another ROM, do it the "SD-CARD" way. I'd only use the wizard to flash the HARDSPL and the SUPERCID.
Let me know how it goes.
Cheers!
Hehe ,My friend ,i had flash my phone with WM6.5 rom ,my device was Dopod838pro ,it is old device ,for my opinion WM6.5 not so suitable for my device ,but WM6.5 look amazing >.<
heh! Nice! Well sounds like your phone is now back amongst the living! That's good news! Hope you have many years of enjoyment with your phone!
Glad to have been of help for you!
Cheers
heh! Nice! Well sounds like your phone is now back amongst the living! That's good news! Hope you have many years of enjoyment with your phone!
Glad to have been of help for you!
Cheers
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
TVincent0621 said:
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
Click to expand...
Click to collapse
Unfortunately, no, I don't. You'd have to get a Vanilla, or a "lite/ultralite" rom. That's about the best I can suggest, unfortunately with the hermes, it does have a smaller ROM size, and limited RAM compared to the new, more up-to-date modern phones, like the 8925(Kaiser), or the new Tilt 2..
Cheers
TVincent0621 said:
Do you have any must have application suggest me to install it ?
the memory for this new rom is low ,it decrease so fast ,with HTC clean ram i use ,it also the same ,it just save less then 1MB of ram ><
Click to expand...
Click to collapse
Unfortunately, no, I don't. You'd have to get a Vanilla, or a "lite/ultralite" rom. That's about the best I can suggest, unfortunately with the hermes, it does have a smaller ROM size, and limited RAM compared to the new, more up-to-date modern phones, like the 8925(Kaiser), or the new Tilt 2..
Cheers
use the [Easy Hard-Spl v7 beta v0.1] by qwasde2
it,s really usefull i tryed it,s by me
it,s for win XP and vista and se7en users
i,am not joking here is the link
http://forum.xda-developers.com/showthread.php?p=5136858#post5136858
Hope you dont mind me reviving this thread as I also need your help
I tried flashing the MrDSL's WM6.5 ROM to my Hermes. Of course I followed the direction, I have Hard SPL (ever since Schaps rom) and stripped ATT flashed first.
However when I started flashing this rom, when I reached about 5% on the progress bar, I keep on getting Error. I followed the Recovery Steps and luckily I get the Tri-color mode and the process says Recovery successful. I then proceeded with the flashing but still getting errors, then recovery, then continue, then error again. Its been 10th try now.
Finally I canceled the update but I can only get the tri-color screen. Tried to Softreset as well as Hardreset but no go....my screen only gives me the Tri-color mode.
Any advice please....
thank you very much...
EDIT.....
problem solved sorry for that post.
what I did was:
1. flashed again the stripped ATT ROM....success!
2. flashed again MrDSL's WM6.5 titanium ROM (titanium)....success!
Dopod 838 Pro working again!
thanks again!!!
Bootloader shows but phone won't flash
Hey everyone,
I'm not new to
flashing my Hermes.
I'm just having an
issue I've never ran
into and can't figure
out. I would
appreciate some
assistance.
The strangest thing
is happening to me
while attempting to
flash from my
storage card. I put
the phone in
bootloader mode
and it takes
(IPL-1.04 /
SPL-2.10.olipro).
Then on the bottom
Serial shows and it
never goes to the
next step and ask
me do I want to
flash the new image.
I put the att original
on the 2gb storage
card over and over
and over and
renamed it
HERMIMG.nbh over
and over and over
and just am
flabbergasted. The
phone is not bricked,
it just refuses to
flash again.
Does anyone here
have any solutions
or suggestions?
PS - I have
formatted the card
to fat32 and I have
checked it for errors.
The HERMIMG.nbh
file is on the root of
the storage card.
My phone's boot loader says SPL 1.42.0000XE. I have not upgraded to any custom rom since I bought the phone in Feb this year.
I decided to do a hard reset since the screen was frozen and soft reset did no good.
Hard reset was successful, but after that it landed on white screen and would not proceed.
I read some articles and downloaded a stock rom RUU_signed_0409.nbh from one of the links. I even copied it to the 8gb sd card that came with my phone. It does say that it is formatted as FAT 32. I renamed the file as leoimg.nbh, reset the phone and pressed the vol down key.
Now it shows the boot loader screen, then says "loading..." forever.
Please help! - By the way, I could never find a WWE version of 1.42.0000 SPL link to download.
i've got the same prob right now.
~ updated my phone with HSPL3 < all went well and finished OK
Phone is rebooting and working
~ now I want to try a different ROM and while installing it via
Active Sync it's giving an USB Error or this LOADING...
When trying to put the new ROM onto the SD Card with leoimg.nbh
it starts with LOADING...
....
I can reboot via removing battery and after that the phone boots up normal.
It's also working. But i can't do any flashes anymore.
*ADD! Error MSG
My PHONE DETAILS:
OS: 5.2.23134 (23134.5.3.9)
Manila: 2.4.20161332.0
ROM: ChuckyROM WWE 30/08/2010
Radio: 2.07.50.27_2
Protocol: 15.33.50.07u
HSPL before error: L2_RUN
HSPL during error: L3_PKG
no ideas?
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
thejippen said:
I have the same problem... I just wanna update with the stock rom (latest). (no customs) . When trying via the pc, i get connection error. when i try via SD i stays on Loading. is there a solution for this ? thanks in advance
Click to expand...
Click to collapse
Yes; using the right stock ROM (the one from your aria)
or using GoldCard technique.
Put the HD2 into bootloader and then connect via usb. Run the flash file. This will only work if you are using a rom that your carrier supports as you have said you don't have HSPL...
have you solved the problem?
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
denni2727 said:
I cant solve this problem either, i´ve been looking for information on the internet the whole day.
Yesterday, i tried to flash my htc hd2 following a tutorial, and I used HSPL3(although I dont know if it really work, because my htc still says 2.08.0000 without the hspl, can somebody clarify this for me, please?), and after that I tried MTTY(Here starts my problem) just as the tutorial says, and then my htc restart, so I tried to flash it via the MicroSD card, but it stays stuck on a white screen which says "loading...", after that I tried to turn it up without the bootloader, but it stayed stuck on the logo screen.
Could somebody please help me???
I would really appreciate it.
Click to expand...
Click to collapse
Two things I have learn;
If you install stock ROM over SD it will remove your HSPL.
And if you see 2.08.0000 spl on your bootscreen than the installation of HSPL was unsuccessful.
OMG...!
Thanks for the reply...
Soo what do you think i can do?
denni2727 said:
OMG...!
Thanks for the reply...
Soo what do you think i can do?
Click to expand...
Click to collapse
Hi,
Did you manage to fix the issue? Is your phone a branded one? The best way to go about is to find the stock ROM for your device and then flash it using the SD card method. This will update your ROM and SLP to stock. From there, you should be able to install HSPL and any custom ROMs.
Tazeem
Hi there,
I have some problems, which I cant solve using your forum.
So Im posting this.
Yesterday my Leo shut down and I couldnt turn on it. Today I've trided Hard Reset, but nothing was made. i can turn my phone on with white screen only. So i decided to reinstal ROM. I'v set up the bootloader and start installing oryginal ROM for HTC. And the installation is going to 1 % and then the phone stops instalation and turns on with white screen only.
What an I doing wrong?
looking for original firmware for your phone on htc.com, using the S / N
I have the same problem !!!
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
you could try to flash with sspl. maybe you have installed the 3.14 rom and removed the hspl.
tycz said:
I've tried original from htc site, still the same.
If its important, when I'm installing, on the instalation Window, where should be written the current wersion of my soft, there's norlng, just empty place.
maybe I should do something like formating my htc or instal something other than ROM?
thx for help!
Click to expand...
Click to collapse
1.try task 29(find on xda) and after that installing HSPL3.
2.after this flash any rom (including stock but i wouldn't recommend newest as we don't have newest hspl and you'll be stuck with, or you will have very small ram(50mb) if you keep older one)
I can't run task 29 from bootloader, the same problem as with ROM, it stops on 0%.
maybe some advices how to run task 29 on bootloader, maybe im doind sth wrong?
I think we have the same problems,
aktiv sync dont work, bootloader modus works,
cant find any solution in the forums,
i have tried flashing from pc and from sd card, no success
what about couple of hard resets on boot(hold down volume buttons) and perhaps try another computer or USB cable-if your friend has one newer etc...
i know from the times i had Omnia that RUU can have probs with computer also.
And have a look at this could help..
i tried all of your tipps but nothing works.
Hspl 2 and 3 do not work.
Here my bootloader information:
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x30
Please help!
Did you update your ROM or Radio version? I read that white screen occurs due to incompatible Radio version.
Anyways, I screwed up my OS today by installing 'Gaz Touch Tools' and on reboot my phone showed some file was missing.. nothing was working.. phone wasn't responding well. couldn't even connect via activesync.. Right now installing Official ROM using MicroSD card.
Update in progress..
RADIO_V2 - OK
RCUST - OK
BOOTLOADER - OK
SPLASH1 - OK
OS -
CONFIGDATA -
EXTROM -
^ as the progress bar increases, the blank spaces change to OK
What I did - Formatted the MicroSD using FAT32, extracted the RUU_signed.nbh from the exe downloaded from HTC website and renamed it to LEOIMG.nbh and copied it on MicroSD card. Inserted card properly in device, started device by holding volume down button. Voila!
Update: Done installing, working fine!
Got the same problem with mine straight out if the box. SPL-1.42.0000
Charging light not working. Sometimes it goes in to bootloader when powering on and sometimes white screen with logo. I'm not impressed!
Hey all, I am having trouble booting anything onto my HD2 everytime i boot the phone i get stuck on the (tri colour screen) "Hardspl" i think..
I am able to install original HTC roms and custom roms via USB and Serial but after i install them and it says installation complete when the phone restarts it just gets stuck on the "Hardspl" screen again??
Any help is appreciated thanks
Here are some images to help
http://img29.imageshack.us/g/dsc0007riq.jpg/
(UPDATED)
How do i remove hspl ive tried installing an offical rom from the SD card but i still boot into this screen ????
Try this........
Power off the phone (make sure your battery is over 50%)
Turn on while holding the vol. down button.
You should be at bootloader (three colour screen)
If you have HSPL installed you should see "cotulla" and "HSPL" on the bootloader somewhere.
If youve been flashing official roms though this may have uninstalled HSPL.
I couldnt get the screenshots you linked to...
You can attach image files using the "manage attachments" button down under the text entry area.. (i think)
Id suggest trying to flash a stock/official rom just now until you get up and running.
With the phone at bootloader you should see the word "serial" at the bottom of the screen....
Connect via USB and wait for "serial" to change to "USB", this could take a few minutes.......
When you see "usb" flash the ROM from your pc......
You should make sure that you have the correct ROM for your phone, go to the HTC site and pump in your serial number.
If you still have problems after this then post back here with any error messages you might get...
Hope that helps.....
Thanks for the reply, for the link you need to add (http ://) sorry i should have mentioned that
but i just finished doing what you told be and it finished installing. it had the HTC logo on phone with loading bar as on PC screen no errors :S but im still stuck on the tri colour screen
I originally had android booted onto this mobile but the 3G was not working so i tried installing the HTC wm 6.5 rom that I downloaded from the HTC website but it would not get out of the tri colour screen after i installed it.
So i though it may have been the hardspl its self so i updated the SLP from 2.05 to the 3.03 one im currently on but it does the same thing
Hmm ok...
So the flash finished all the wasy to 100% and there were no error messages..
then the phone rebooted and went to bootloader (3 colours)...??
Restarting the phone just keeps returning you to bootloader??
Try turning off then back on while holding down both volume buttons and see what happens.
Which model of HD2 do you have and which ROM did you flash??
Yes thats correct.
When i turn the device on wile holding vol up-down i get a grey screen to
"This operation will delete all your personal data, and reset all settings to manufacturer default. press vol up to restore or press any other keys to cancel"
and im not sure what HTC HD2 i have..
Model: T8585 ?
I flashed the latest rom from the HTC website using the S/N
"RUU_Leo_S_HKCSL_WWE_3.14.831.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship"
Okay, get to that screen and press volume up to continue, this will perform a hard reset which is recommended after a flash, your device should then boot up, may take a few minutes as its the first time..........
ok, It finished in like less then 10sec but there was not skips did from 1% - 100% smoothly and says "Restore....Completed Press VolUp to boot"
So i pressed volume up and once again stuck on the tri colour screen
any more suggestions or is my phone dead?
Hmmm
Phones not bricked because 95% of the time if you can get to bootloader the problem can be fixed........
I have the feeling this is something obvious that Im not picking up on.
Chances are someone else will see this and point out the obvious but at the minute I cant think why it might be doing that......
You could try flashing the ROM from SD card.
Rename the file on your PC to "leoimg.nbh" and put it on a 2gb/4gb sd card, turn the phone off, put the card in, turn on and it should flash........
Like I said, i dont think your phone is dead, I think Im missing something obvious....
its weird because i can install roms, hardspl's and all that stuff it knows the phone is there and installs them but for some reason it never gets passes the hardspl stage.. on each boot.
it accually boots into the tri colour screen in a split second of turning the phone on
Its a longshot but is there any possibility that your volume down button is stuck in the pressed position.........
yeah i have installed off the SD card already. that took awhile but it says everything is ok and installsion has completed.
same problem though once i restart tri-coloured screen pops up.
Im afraid Im not sure about this one...........
I'll keep thinking and let you know if anything occurs to me.....
Im sure someone else will chip in at some point and point out the issue though.
alright no worries thanks for the help and time hopefully someone knows what the problem is.
Maybe if i uninstall the Hardspl? might totally wreck it and 100% brick my phone if it fails but I think its the only option ill have left soon
uninstalling hspl shouldnt cause any harm........
I didnt realise you had HSPL installed, I take it you instaled that after flashing the stock rom??
If you have HSPL installed......
Try to install a custom rom, ie an energy rom, just as an experiment........
dunno if youve seen the images yet conan, but unless its changed since, the OP has 3.03.0000
also, if he has magldr installed ( i didnt see it mentioned, but..) when you hard reset it takes just a few seconds, because it is only hard resetting magldr (at least thats my understanding, and would offer a reason why hard reset is so quick)
I suspect incorrect 3,14 flash, which didnt complete so its returning to bootloader,
so, OP, bootloader - hspl4 - 3.03.hspl - flash your 3.13 rom again, over usb.
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
If this works im donating $20 to you right away no joke .. ive been trying to fix for 13hours straight
Australian icon said:
ok thanks ill try that right now, also yes magldr was installed for android but i thought I got rid of it once i rebooted the offical HTC rom.
Click to expand...
Click to collapse
sd card flash, right?
Step 1 of the flash is the spl gets overwritten by the one in the leoing.nbh rom (3.03.0000 in this case) and then the phone reboots, and starts to flash , , splashscreen (where magldr is), radio, rom.
BUT, the phone wont allow the flash to start because hspl is now gone, so it fails CID checks and stops, so doesn't remove magldr, radio, rom, nothing, it just stops. Further attempts at flashing fail because you teh user haven't notived the spl change, you assume the whole flash failed, and that hspl is still there.
You shouldnt be able to get that far normaly, it would fail before it even starts, on a stock spl, except that hspl was there, so the flash was allowed to begin.
Ok, so its on SPL-3.03.HSPL now then I installed the latest HTC offical rom with USB but still no go
also if it is resetting magldr how come it doesent load up like it used to after a reset
Hello,
I have bought used HTC HD2, which I had to repair - classic touch problem (I haven't repaired it myself). What surprised me, after the phone returned to me, it has "T-mobile" glass, but it hasn't red "dismiss call" button... So everything says it is EU version...
I wanted to install WP7.8. The phone had HSPL 2.08 and some custom WM6.5 rom. I had done Task29 and installed Magldr 1.13 (with HD2 toolkit), then I have enabled last 24mb nand and cleared mbr sd card in magldr. Everything seemd to be fine. Then I had selected usb flasher and run DWI.exe of Pdaimatejam ROM on PC. It installed, but after "Reset Now" had appeared on the phone, it didn't reboot. :/ I have pulled out battery but phone got into bootloop. Than I have repeated tasks from Task29, now it rebooted itself but still bootloop.
So I have decided to return to WM6.5 and start again. I have downloaded that RUU: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship I have entered hspl, then run ruu on the computer, it installed successfully but the phone doesn't boot again (white bootscreen, and reboot) :/ . I have tried again, now error occurred during installing, luckily despite hspl error, I could install rom again, but bootloop again occurs...
What should I do now? :/ I am afraid of battery level...
After installing official RUU, HSPL has stayed, is that ok?
b.andy said:
Hello,
I have bought used HTC HD2, which I had to repair - classic touch problem (I haven't repaired it myself). What surprised me, after the phone returned to me, it has "T-mobile" glass, but it hasn't red "dismiss call" button... So everything says it is EU version...
I wanted to install WP7.8. The phone had HSPL 2.08 and some custom WM6.5 rom. I had done Task29 and installed Magldr 1.13 (with HD2 toolkit), then I have enabled last 24mb nand and cleared mbr sd card in magldr. Everything seemd to be fine. Then I had selected usb flasher and run DWI.exe of Pdaimatejam ROM on PC. It installed, but after "Reset Now" had appeared on the phone, it didn't reboot. :/ I have pulled out battery but phone got into bootloop. Than I have repeated tasks from Task29, now it rebooted itself but still bootloop.
So I have decided to return to WM6.5 and start again. I have downloaded that RUU: RUU_Leo_S_HTC_WWE_EastEurope_3.14.479.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship I have entered hspl, then run ruu on the computer, it installed successfully but the phone doesn't boot again (white bootscreen, and reboot) :/ . I have tried again, now error occurred during installing, luckily despite hspl error, I could install rom again, but bootloop again occurs...
What should I do now? :/ I am afraid of battery level...
After installing official RUU, HSPL has stayed, is that ok?
Click to expand...
Click to collapse
now i assume that you are in windows mobile,you still be able to charge while your phone off if you are in windows mobile mode.
1. How can you be sure if you're device is EU models?please re-HSPL your device with HSPL 4 and install Black LK find out how much is your ROM space,remeber that part of EU and t-mobile was almost the same.
2. Your bootloop problem could be because you've installed wrong ROM in to wrong Device OR due to MMC,to check it,after flasing windows mobile ROM try to reboot,if you got bootloop try to remove MMC than reboot (it works for me)
3.If you are trying to install Windows Phone and got the bootloop,it might be because of the MMC (class,brand,etc.) try to find more information regarding this in Windows Phone section.
Hope it helps