i have a htc hd2. i am facing a problem regarding screen rotation.
when i open phone dialer the automatically rotates to landscape mode even when the phone is held in portrait mode. also the loudspeaker turns on automatically when a call is recieved or made.
same screen rotation problem is also when i start htc messages.
i have tried hard reset but it didnt help.
what rom? what model hd2 you got?
the same problem
I have the same problem. model :htc hd2 T8585 ROM:1.66.468.1
It really drive me crazy. And addition to that my home button doesn't work, when I lock my phone it works for opening the screen but when I open a program or somthing else it doesn't work. Any solution you know for these?
rom version - 1.48.720.2 (71294) wwe
model no - htc hd2 t8585
I've solved my problem. In fact I'm not so sure how I did it but I uninstall some programs than the problem is solved. Try to uninstall the programs that you install latelly. see u ...
Related
hi to all xda family, i need ur help please.
i am using imate jasjam hermes 100, i am having an annoying problem with my set. The front buttons of my jasjam stop working suddenly, but the light behind the bottom two call buttons still remains on even i go to stand by time using side power key. Sometimes the screen fades away and a blank white screen appears. It seems to me that the the cell hangs temporarily as after sometime it starts working fine (in some cases i have to soft reset the device). but in the scenario described above my cell is in on state as if someone calls me, i can hear the caller tone. i just wanna ask to all of you that if it is a software problem or a hardware problem and how to solve that.
i am using joshkoss manila2d plane jane version with radio rom 1.16.0.0 and hardspl 2.10 installed. i've also tried tai 6.5 roms, but the problem still exists.
i have a htc hd2. i am facing a problem regarding screen rotation.
when i open phone dialer the automatically rotates to landscape mode even when the phone is held in portrait mode. also the loudspeaker turns on automatically when a call is recieved or made.
same screen rotation problem is also when i start htc messages.
i have tried hard reset but it didnt help.
only when the phone is on charging this problem do not occur. plzz help.
rom version - 1.48.720.2 (71294) wwe
model no - htc hd2 t8585
i bet when you connect to pc it wont sync too, right? only charge?
stuck in car kit mode.
READ and READ and then send it back
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Hi,
It is quite normal for the new Tango ROM to display that extra HTC specific step, even though it doesn't work!
I experimented with the Titan a bit and found that as soon as the Start screen appears after setup, before doing anything else, long press the Connection setup app in the app list and uninstall it.
It will enable normal functionality.
If needed you can always download it again from Marketplace.
「 Jai Hind 」
Sent from my GT-N7000 using xda app-developers app
It happened to me too!!!
Moreover, after a hard-reset the HTC Market disappeared in the market!
I disabled the pin to the sim re-formatted, and connected to electricity, and aftew few times HTC market reappeared (!), immediately updated ALL the htc software (even the connection wizard) and everything is OK now... exept the possibility to install INSIDER (by Microsoft)... it is said that the app is not available for my device (!!!) ... I used it until yesterday on my Titan with Mango... I REALLY DO NOT KNOW
BYE
link8506 said:
Hi,
A few days ago, I updated my HTC Titan (bought in 2011 in France as a sim-unlocked device) to the official Tango update (+ firmware update) through Zune.
Then, after doing a hard reset, the usual setup assistant is displayed, but at the end of it there is a new step that wasn't there before the update (titled "Almost Done") telling me that the phone is going to launch some kind of htc specific utility in order to configure my data connection for my carrier. Then after clicking on "continue", I see a black screen for about 15 seconds (like when an app doesn't manage to load properly and WP7 kills it because it took too long to start), then the start screen appears (but I don't receive the usual fake welcome SMS from Windows Phone).
I can launch apps, but the capacitive Back button, Start button, Search button don't react (they cause the phone to vibrate, but WP doesn't react to these commands).
After shutting down the phone and restarting it, I'm greeted by the setup recovering screen (titled "Welcome Back") telling me that Windows Phone will resume my setup where I left it (that explains why the capacitive buttons don't react: they were software disabled because Windows Phone considered it was still in first setup mode. Same for the fake welcome sms I didn't receive). Of course the same problem happens again when I tap on continue, and when I restart my phone.
I tried several hard reset through the usual methods (either through the about menu, or through the menu displayed using VolUp+VolDown at startup). Still the same problem. I guess it's a bug that should happen on many Titan devices. I contacted the HTC support and they told me to send my phone back to HTC for repair
Of course Zune won't let me restore the backup because of the firmware update not longer compatible with the backup.
Did anybody have the same problem with a stock htc titan rom?
I'm also wondering what is the new "HTC Log disable" command on the "CUST APPSBL" screen? I'm sure it wasn't there before the update. Is there some kind of htc specific logging that is enabled by default (since it is a "disable" command). What is being logged?
Also, the red diode (indicating when the battery is charging) is being lit during startup, which didn't happen before the update. Does that mean something?
Click to expand...
Click to collapse
Yes, exactly the same problem happened after hard-resetting on tango. I simply waited a bit with the phone on the main menu and the softkeys not working. After a while, I received the WP7 welcome text, and the softkeys started to work again.
maTTeo
Hi all,
I made a new hard-reset.
As suggested by maTTeo I simply waited even with softkeys not working... I only disactivated the pin on sim so that the Titan could find an internet connection.
After receiving the SMS of woelcome on WP7, I immediately upgraded all the HTC apps
Everythings seems fine for the moment...
BYE
hey guys, i got this problem and it is annoying. Everything work for few hours but it stopped and after some thime it starts again. I tried hard and soft reset and after it, phone works fine for half a day and again start to work bad. Here is list of problem and it comes all together and disapear together.
1. the phone compass does not work any more
2. gyro doesnt work (so no more racing games)
3. auto screen rotation does not work
4. cannnot set the screen brightness to auto mode
5. on call screen doesn't go off when u bring the phone closer to your ear.(due to this the calls get disconnected when the screen touchs your face)
6. the lights in the windows key, back key & the search key does not light anymore.
7. cannot run the Here lens app (says your device does not support motion sensor)
But every thing else works perfect. is there any body else who faced the same issue or is it only me?
And this phone was originaly on swedish firmware but my brother instaled UK, but it was normal for some time.
TNx
did you use screen protector?
you can try hard reset or reflash, but if problem continue maybe is hardware problem
no i dont have screen protector.
My brother said that he was found one ROM on wich the phone work normally, but it is pre-Amber ROM, and after upda is started to screw again.
sasa90 said:
no i dont have screen protector.
My brother said that he was found one ROM on wich the phone work normally, but it is pre-Amber ROM, and after upda is started to screw again.
Click to expand...
Click to collapse
try flashing any black ROM...
if you want, try retail Adriatic version 059R7Z0: 3051.40000.1349.0003
Is there any step by step tutorial for flashing?
Already i have UK black ROM.
http://forum.xda-developers.com/showthread.php?t=2515453
sasa90 said:
Is there any step by step tutorial for flashing?
Already i have UK black ROM.
Click to expand...
Click to collapse
Hey, did flashing a new rom fix your issue?
Thanks
I didnt try to flash another ROM, so dont know is there fix, but i know there is somre of firsts roms that helps, but if you update phone it will no work again.
Hi there,
I got the same errors as stated below for my black lumia 920 (CV DE):
sasa90 said:
1. the phone compass does not work any more
2. gyro doesnt work (so no more racing games)
3. auto screen rotation does not work
4. cannnot set the screen brightness to auto mode
5. on call screen doesn't go off when u bring the phone closer to your ear.(due to this the calls get disconnected when the screen touchs your face)
6. the lights in the windows key, back key & the search key does not light anymore.
7. cannot run the Here lens app (says your device does not support motion sensor)
Click to expand...
Click to collapse
For me it all started when updating my Lumia OTA. After the update was installed my Lumia was stuck in a boot loop only showing the Nokia logo on a black background and rebooting afterwards without even getting to the blue WP logo screen.
To get rid of the boot loop I flashed different types of firmwares I got via NaviFirm 3.2 with the Nokia Care Suit onto my 920. Some of them solved the boot loop problem but unfortunately the above mentioned errors occured. Some of them got me stuck in a boot loop again. But I haven't found a single rom for which the gyroscope, accelerometer, proximity sensor work yet...
Before the OTA update I could use the nokia lense app without any hick ups now it says that it is not able to install the app due to missing sensors.
So it seems to me that these are software related issues rather than hardware failure but I have no idea what happened during the failed OTA update that might cause these errors.
Here is a list of the roms I flashed onto my 920, maybe I will try some more. Unfortunately I do not know that firmware version installed before trying to update OTA.
3051.400000.1349.0001 - Problems above occured
1232.2109.1242.1000 Global black swap - very slow+Problems above occured
1232.2109.1242.1000_RETAIL_EU - very slow+Problems above occured
1232.5951.1249.1001 - RM-821 VAR EURO2 DE Black - Problems above occured+no manual brightness
1232.5951.1249.1001 - CV DE - very slow+Problems above occured
1232.5957.1308.0001 DE- Boot loop
1232.5957.1308.0001 IT_COSTA - Boot loop
3047.0000.1326.2001_RETAIL_eu - Problems above occured
3049.0000.1330.0009_RETAIL_eu - Problems above occured+no manual brightness
3051.400000.1351.2005 - Problems above occured
Ok, so I have installed the 8.1 preview for developer firmware. After installation finished all of a sudden the lights of the capacitive buttons lit up. After turning on and off my phone several times rotation started working. Then I installed the facebook app. It crashed and told me some sensors weren't working properly. Rotation stopped working and the lights on the buttons went out. I uninstalled facebook and restarted several times also doing soft resets until the lights came back on.
Now after 1 day of using my phone I realized that even the proximity sensor is working fine when answering calls...I am confused but happy...Maybe I will try to reinstall the FB apps the next days...However I would recommend trying the 8.1 preview for those experiencing the issues above!
I know that it's an old post, but I'm having this issue and this is the only post I found on the internet where the symptoms are the same as mine. After lots of tries I found out in part what's the culprit of the issue: anytime my phone is loaded with backgroud operations (mostly when involving data communication), the sensors stop working correctly and I have to either restart the phone or wait until all the background jobs are done.
To avoid this issue from happening 8/10 times a day, I had to deny background operations to almost every app (only Cortana had background execution) so that happens only once or twice a day and always next to operations like app store updates, intense internet usage, intense facebook/whatsapp usage (since latest updates you can see arrows next to cellular/wi-fi icons when data is being exchanged, and during this issue the arrows, uploading or downloading, are always working intensely).
Microsoft support doesn't help and says that must be an HW issue, but I reproduced it on 2 different Lumia using my account, so it's not HW related, but still they don't take into consideration that and, obviously, I don't have a way to debug the OS runtime to find out what happens in such moments.
I too have the same problem on lumia 920 for the past years. Very irritating. Please let me know if you have solutions.
email: [email protected]
Thanks !!
Hi, my problem is , that sometimes i cannt finish phone call. Touch screen without reaction and hardware buttons also.
I did factory reset, but problem is here again. Now I try another phone call app. Do you think, that problem is in hardware or in software?
In worst case, how to reinstall software? Will you help me?
shockwave22 said:
Hi, my problem is , that sometimes i cannt finish phone call. Touch screen without reaction and hardware buttons also.
I did factory reset, but problem is here again. Now I try another phone call app. Do you think, that problem is in hardware or in software?
In worst case, how to reinstall software? Will you help me?
Click to expand...
Click to collapse
Is the screen dark when you touch it?
Or does the phone app just not respond?
no it is not dark touch screen, when touch the touch screen no reaction