Related
Hello all. My name is Brian, I'm from Florida, receiving my first Android Device (Atrix 4g) in the mail hopefully tomorrow! My phone history is: Samsung A737 (few months), Blackberry 9000 (2.5 Years).
My plan is to get knowledgeable on how to use the android software on a very basic level over this week, and I plan to flash / customize my Atrix this weekend. This is where I have some questions / seek advice:
The first step being a flash to 1.2.6 This is the step I'm the most "worried" or "unsure" about due to the fact that I've seen youtube videos performing the other steps. But I'll just download the 1.2.6 files, and follow this guide.
Once successfully flashed back to 1.2.6, I'll use GladRoot to root my phone to 1.5.7.
I'm not yet familiar with android and the capabilities, but from what I understand, once rooted, my device can load an .APK from a SD card. This is for the next step when I place Tenfar's CWM onto my SD card as a .apk and load it? Once this is done I will have an application, according to this guide, which I will run, use Install Recovery (2 times), then Recovery Boot. This will put me in some mode from which I will install the .zip file (Gingerblur / Greyblur) that I put on my SD card in the first place. "Congratulations! You’ve installed your very own Atrix 4G custom ROM!" being the desired outcome .
My questions are: Does my Atrix come on 1.2.6, so I don't even need to do the first step at all? Is rooting as simple as it seems? What is a CWM, in simple terms ? Is my phone's insurance ($5/month through at&t) voided by flashing / customizing?
I know I'm rather redundant with the guides that have been provided, its just that I want to be sure I'm not making any mistakes because I'm so naïve with the android software (lol I'm -1 days experienced right now, assuming it comes tomorrow). These guides are wonderfully created and I will surely thank some of the great developers (in a monetary manner ) at the end of my android customization. Your help is greatly appreciated in advance!
Foraker said:
Hello all. My name is Brian, I'm from Florida, receiving my first Android Device (Atrix 4g) in the mail hopefully tomorrow! My phone history is: Samsung A737 (few months), Blackberry 9000 (2.5 Years).
My plan is to get knowledgeable on how to use the android software on a very basic level over this week, and I plan to flash / customize my Atrix this weekend. This is where I have some questions / seek advice:
The first step being a flash to 1.2.6 This is the step I'm the most "worried" or "unsure" about due to the fact that I've seen youtube videos performing the other steps. But I'll just download the 1.2.6 files, and follow this guide.
Once successfully flashed back to 1.2.6, I'll use GladRoot to root my phone to 1.5.7.
I'm not yet familiar with android and the capabilities, but from what I understand, once rooted, my device can load an .APK from a SD card. This is for the next step when I place Tenfar's CWM onto my SD card as a .apk and load it? Once this is done I will have an application, according to this guide, which I will run, use Install Recovery (2 times), then Recovery Boot. This will put me in some mode from which I will install the .zip file (Gingerblur / Greyblur) that I put on my SD card in the first place. "Congratulations! You’ve installed your very own Atrix 4G custom ROM!" being the desired outcome .
My questions are: Does my Atrix come on 1.2.6, so I don't even need to do the first step at all? Is rooting as simple as it seems? What is a CWM, in simple terms ? Is my phone's insurance ($5/month through at&t) voided by flashing / customizing?
I know I'm rather redundant with the guides that have been provided, its just that I want to be sure I'm not making any mistakes because I'm so naïve with the android software (lol I'm -1 days experienced right now, assuming it comes tomorrow). These guides are wonderfully created and I will surely thank some of the great developers (in a monetary manner ) at the end of my android customization. Your help is greatly appreciated in advance!
Click to expand...
Click to collapse
The phone should come loaded 1.2.6 so no flash is required. After you get use to it run the gladroot very simple process to do. after that update to the newest 4.1.5.7 then run the after update so then you will be rooted on the newest 4.1.5.7 after your done with that do whatever you want. I am by far no expert. I too also recently got my atrix and was scared to death to do this on my own. Just read alot and ask alot of questions. Today i finally flashed gingerblur on my phone and love it along with the webtop mod. Rooting is simple the whole process on everything is simple now with that said i havent had to flash back stop through RSD yet so i dont know about that. Flashing will void your insurance unless if you can flash it back stock. Just go in the android development section on the atrix forums and everything is usually on page 1. Best thing you can do make a folder on your desktop with all the phones drivers and any files you download and also the rsd, in my folder i also copy and pasted instructions in each folder for each process so i wouldnt have to dig in the threads to find it. Hope this helps and like i said im not expert at this.
Seems like you're on the right track don't be too scared everything you want to do has very good instructions to go with so im sure you'll do fine. One thing though that will help you and also provide more of live help is get an irc cliet and go to the #moto-atrix channel alot of the devs and knowledgeable people hang out there and are very helpful, a lot of people on there were also on the same boat you're in not too long ago so they'll help a lot
Sent from my MB860 using XDA Premium App
Thanks guys! Got my atrix in the mail, loving every minute of it compared to that garbage Blackberry. As far as an IRC client goes, I just downloaded mIRC, thanks for the advice!
First off, thanks for taking the time to read my post. I have been trying to root/flash rom since yesterday at 11am now 2:19pm a day later. So before whinning here, I did do my research. Flash is now done, *sigh*
I would like the froyo tazzv26 or 28 rom flashed on my Eris
I've watched yourtube how to videos, unlockr videos, several adroidforums how to posts. they all revert me back here.
My issue is this #1:most of those are old posts(which I've read and been reverted to), and obvious upgrades have been made therefore what thier videos/posts show are not what I'm seeing or reading . Being that this is new to me I feel lost and confused.
Issue#2 I found the rom I wanted, here when I searched Roms for Eris however a link that is next to it sends me to another and another page. Very frustrating.
Favor needed: I've never done this before so can someone please help walk me through the process of being on the ACTUAL page with the download link, and what happens from then. Then let me know what i'm supposed to be seeing on my computer screen once the process starts .** WOW this part is massively missing from all noobie post/videos= FYI for admins and moderators
FYI Eris is already rooted wth 4zroot (instead of HTC1 click since the power up and power button thing didn't work 4 times) I have superuser, quickboot, rom manager, and astro file manager all installed and ready to go.
I'm ready to take your lead
Dulce,
Saw your post over on AF and replied over there, but did really get the gist of your needs until I saw this thread over here on XDA.
Rooting with Z4 root does indeed root you, but this will not allow you to flash or install a custom ROM without having replaced your stock recovery with a custom one, the "one" being Amon_RA (stay away from ClockworkMod at this time for the Eris...the details are probably more than you want or need to know at this time).
The 1-click method that you mentioned previously is what you want and it will install Amon_RA's custom recovery for you.
I would highly advised you to read and understand this thread over on AndroidForums: http://androidforums.com/eris-all-things-root/127861-universal-eris-root-dummies.html
You will learn what you need to know from that thread and it will also show you how to install the very same custom recovery as the 1-click method/app. It is clearly more verbose, but the trade-off / benefit is that you will have the best instruction possible regarding rooting your Eris.
Check it out and good luck!
Cheers!
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Although Lightn'ing (LitePro's) looks interesting and I may try that ROM later, for now I want to avoid changing the ROM till I know I like the phone. So I'm looking at the first three choices.
The one that I think I would be able to do easiest is either lyriquidperfection's or CLShortFuse's methods as they both are one-click solutions and I just need to grab the right kernels.
I don't know if there's any reason I would want to go with Chainfire's instead of the two previously mentioned. If there is please let me know.
I asked this question on the respective threads but as of posting haven't gotten an answer of if there's any reason to flash the original kernel back after rooting and if I keep root if I flash it back.
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Unlocking:
For unlocking I looked at:
http://forum.xda-developers.com/showthread.php?t=1092451
However it seems for my specific phone (Virgin/Bell) we use this method as posted in the same thread:
http://forum.xda-developers.com/showthread.php?p=16482293#post16482293
This seems pretty much straight-forward. I just got to root the phone then get and run the app mentioned. Phone will crash/reboot and then no SIM lock.
If there's anything that seems wrong with this let me know please.
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
I also here Titanium backup (sp?) is also a good idea to install at some point.
Is there other apps or otherwise I should be looking into before I start this journey into the wonderful world of hacked smartphones?
-This is a place marker for me making amendments so that later this may be more or less a guide for other beginners-
Dav_Edward said:
Although I've flashed non-phone devices in the past (routers, PAP2, Ipod classic, etc.) This is the first time I'm going to be flashing a SmartPhone that I've ordered which I should be getting very soon.
I ordered a Samsung Galaxy S II and have been crawling the forum trying to learn all I can before I try rooting and unlocking my phone when I get it. But I'm having trouble deciding on a few things.
Hopefully my question can become a guide for other new people who are just starting off like me.
Rooting:
To begin, I'm trying to figure out what's best for rooting.
I've looked at a few different methods..
Chainfire's direct method: http://forum.xda-developers.com/showthread.php?t=1103399
lyriquidperfection's one-click method: http://forum.xda-developers.com/showthread.php?t=1125414
CLShortFuse's one-click method: http://forum.xda-developers.com/showthread.php?t=803682
LitePro's ROM and Root method all-in-one: http://forum.xda-developers.com/showthread.php?t=1095274
All of these have their own merits. But I'm trying to figure out the best approach for myself.
Chainfires simplest method less problems for most .
Root + CWM .
http://forum.xda-developers.com/showthread.php?t=1103399
I also don't know much about the use of Jigs to avoid the flash counter going up. Is there any reason I need to worry about the flash counter going up? Is there a limit on number of flashes on a phone?
Zero as Samsung will invalidate warranty for custom roms or rooted phones .
Other stuff:
At some stage here I want to be able to back up the stuff on the phone and get other typical tools.
I keep hearing about ClockWorkMod constantly and it seems to be a tool for backing up the phone data and making it easier to flash stuff in without use of ODIN.
I haven't found clear documentation on how I would do this on the SGII specifically.
Their is no documentation its probably written up in the FAQ or Wip but is a relativity simple tool anyway .Backup restore phones rom install custom rom wipe data factory reset reset battery stats to zero .
FAQ
http://forum.xda-developers.com/showthread.php?t=1065995
Wip
http://forum.xda-developers.com/showthread.php?t=1125282
I also here Titanium backup (sp?) is also a good idea to install at some point.
On a rooted phone Titanium pro allows you to back up your apps and also to freeze apps .
jje
Click to expand...
Click to collapse
Thorough stuff, props to you sir - you know search so you'll get your first thanks...
I would advice you to go with Chainfire's method. It's the easiest and most versatile method IMO. Definitely the best for beginners because you keep your stock ROM yet still are rooted and get Clockwork Mod.
The installed CWM (Clockwork Mod) Manager app with Chainfire's work is an easy way to see what it does - basically you can backup and restore your whole system/device, plus flash custom ROM/kernels/themes etc. Look into the flashing part later - baby steps are good here!
Titanium Backup is an excellent backup app for backing up/restoring apps and data, as opposed to the whole system. Buy the Pro version, definitely worth it.
I also like My Backup (also on Market), excellent for backing up contacts/SMS/MMS. The free version is a 30 day trial.
Can't help with unlocking, never needed to - sure others can help.
Good luck
Edit - JJ beat me too it, hadn't seen his post. Must type faster...
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Dav_Edward said:
@JJEgan & @B3311, thanks for the useful information.
I was going to try those one-click methods because I thought those were the more newbie friendly methods. Thanks for the information to try using Chainfire's instead.
I will try using Chainfire's method instead with your advice when I get the phone. Having the tools like his CWM hopefully will make things easier.
I am a bit concerned though about his mention that Rom Loader won't work with his version of the build. I'd still like the ability to use custom roms down the road once I learn how to properly back up the phone so I can experiment with various roms till I find the one I like most.
Any advice about using rom loader or other possible difficulties using Chainfire's kernel?
Click to expand...
Click to collapse
Most just put custom rom on sd card and flash via CWM .
Sorry no nothing about Rom Loader .
jje
I would also advice using CF-Root. I was scared of rooting my phone, but after using CF-Root, I don’t know why I was so scared. The process took a little over 30 seconds (I need practice). To me at lease I think it’s the easiest method, you just need to make sure to download the right kernel.
EDIT:
Get a UBS jig, After rooting, I had the "yellow triangle" I turned off phone, removed battery, inserted jig, put back battery, entered download mode, restarted phone and no more "yellow triangle"
i was originally on at&t 2.3.6 firmware, after rooted it and unlock the bootloader i decided to install the "DarkSide" rom on prefinal version and it worked fine (minor bugs), but my question is that if i decide to install the latest version of alien (which i have heard the version in minor of 2.3.6), could cause me any kind of brick???
i am really new on all of this and i don't want to screw anything
Thanks in Advance.
If you've unlocked the bootloader, it shouldn't have a problem. I say shouldn't because there's always a small chance that something can happen. But to be honest, bricks usually happen when users don't follow instructions or read warnings, at least in my experience.
First rule of thumb when end user hacking or softmodding any device, be it a game system or phone, always read instructions all the way through before and during the process. This will minimize the chance of bricking.
If you're not comfortable with taking the risk, then maybe you shouldn't have unlocked the bootloader. I just hope that you realize your phone's warranty is shot, and there's no going back.
Sorry, I'm not trying to sound rude. I just want you to realize that if it bricks, you're responsible, and nobody else is. But it shouldn't brick if you follow directions carefully, and make sure you're installing the correct version, be it Bell or AT&T. Also make sure, in general for any rom, that you don't install a version with high-performance mods, like overclocking to 1.45ghz. This is not to be done lightly, as it can lead to burning up your phone, if not taken care of properly. Again, read warnings.
It is recommended to perform a backup of apps, contacts, SMS or whatever before doing anything. This can help when testing a new rom, as there may be something you end up not liking about the rom, and redoing the whole setup process can get tiring. I recommend TiBu (Titanium Backup) for apps and Super Backup for SMS, contacts, and Call logs. These are available in the market, and they work across different roms. TiBu Pro costs about $5 though, but it's the second best $5 spent on the market, next to PowerAmp. ( ) It will be invaluable to you. The free version does not support batch restore (and backup I think, batch means multiples at a time)
I wish you luck, and I hope this helps. If you skipped parts of this (I understand why, loooong), I warned you.
Take care,
Drakonas
So, if i wanted to install Alien or NottachTrix1.2.5 rom is nesesary that i need to get back to 2.3.6 at&t stock firmware???, i am currently on darkside rom, my atrix was rooted and unlocked when i was on 2.3.6 new version of at&t
I really want to test Alien or NottachTrix rom, Any help would be truly appreciated
this is a bit off but could you link me to the directions you used to unlock the BL for 2.3.6? >.<
ianwardell said:
this is a bit off but could you link me to the directions you used to unlock the BL for 2.3.6? >.<
Click to expand...
Click to collapse
Sorry about the late answer
I just follow this video
well, i can not post a link because i have less than 8 messages but the exact name on youtube is "How to Unlock the Bootloader for Atrix 4G Running GB 2.3.4 and 2.3.6 4.5.141"
i know that it says that is for atrix at&t 2.3.4 but it worked for my virgin atrix 2.3.6 at&t, i recomend to watch the video 3-5 times before trying, just follow step by step very carefully and when in your phone says that:
"Failed to boot, error 0x1000"
"No OS found"
i just restarted the same program but in option 3, it will automatically follow the next step
Remember, this is not a guide of any kind, just sharing my personal experience, this is what i used
Virgin Atrix 4G AT&T 2.3.6 4.5.141 firmware
Windows 7 64-bits
and the software that is on the video, please tell me how it goes for you, remember ask all your questions before doing it
I have the following:
Samsung-SGH-I777
2.3.6
I777UCKK6
2.6.35.7
GingerBread.UCKK6
I have spent a lot of time reading XDA and other Android Boards hoping I could find a pretty straightforward way to get control of my phone (su access?). I want to get rid of apps that T put on and I also want to be able to hotspot my phone. But I really want to understand what I am doing. Every thread seems to assume a level of knowledge I just don't think I have. I'm tempted to jump in but feel like I'll then just be a poster saying HELP BRICKED MY PHONE.
When I come across a youtube or pdf that looks promising - it invariably has comments associated with it like: Oh, if you upgraded to 2.3.6 watch out.....or, I did this and now my wifi doesn't work.
Here is my question - can anyone point me to a thread or website that really walks a novice through the basics like the difference between a Rom and a kernel, how the SD card works etc.
And certainly if someone can point me to a solid root procedure for my phone (see above) please feel free.
Thanks for listening
Peter
Stackman1 said:
I have the following:
Samsung-SGH-I777
2.3.6
I777UCKK6
2.6.35.7
GingerBread.UCKK6
I have spent a lot of time reading XDA and other Android Boards hoping I could find a pretty straightforward way to get control of my phone (su access?). I want to get rid of apps that T put on and I also want to be able to hotspot my phone. But I really want to understand what I am doing. Every thread seems to assume a level of knowledge I just don't think I have. I'm tempted to jump in but feel like I'll then just be a poster saying HELP BRICKED MY PHONE.
When I come across a youtube or pdf that looks promising - it invariably has comments associated with it like: Oh, if you upgraded to 2.3.6 watch out.....or, I did this and now my wifi doesn't work.
Here is my question - can anyone point me to a thread or website that really walks a novice through the basics like the difference between a Rom and a kernel, how the SD card works etc.
And certainly if someone can point me to a solid root procedure for my phone (see above) please feel free.
Thanks for listening
Peter
Click to expand...
Click to collapse
Sorry man, That level of knowledge you speak of, is what you need. If you cant find the info, dont root your phone.
We dont hold hands here, there is plenty of info around. Find it and put it to use.
If you searched for everything your looking for, you'd find your answers.
Its obvious that you HAVE NOT spent anytime looking for the answers you seek.
Good luck peter.
Like what was said above, getting the information for all these things is really simple.
Read the stickies.
All of the warnings and disclaimers are tacked onto the instructions because people don't want you to blame them if you don't follow directions or if something that works for someone else doesn't work for you.
Stackman1 said:
I have the following:
Samsung-SGH-I777
2.3.6
I777UCKK6
2.6.35.7
GingerBread.UCKK6
I have spent a lot of time reading XDA and other Android Boards hoping I could find a pretty straightforward way to get control of my phone (su access?). I want to get rid of apps that T put on and I also want to be able to hotspot my phone. But I really want to understand what I am doing. Every thread seems to assume a level of knowledge I just don't think I have. I'm tempted to jump in but feel like I'll then just be a poster saying HELP BRICKED MY PHONE.
Click to expand...
Click to collapse
Are you using the AT&T phone on T-mobile? Just curious.
When I come across a youtube or pdf that looks promising - it invariably has comments associated with it like: Oh, if you upgraded to 2.3.6 watch out.....or, I did this and now my wifi doesn't work.
Click to expand...
Click to collapse
Just my personal opinion, but I would forget all the other sites, and youtube videos, and stick with what you learn here.
Here is my question - can anyone point me to a thread or website that really walks a novice through the basics like the difference between a Rom and a kernel, how the SD card works etc.
Click to expand...
Click to collapse
I'm not aware of such a guide. Some of the information is so basic that no one would think to make a guide for it. But I can give you one tip: in my guide there is a link to extra information for newbies. That can be fairly helpful.
And certainly if someone can point me to a solid root procedure for my phone (see above) please feel free.
Click to expand...
Click to collapse
In my opinion, my guide is the best, but if you must, you can also use Jivy26's how to root guide.
Thanks for listening
Peter
Click to expand...
Click to collapse
Creepy -
Thanks for taking the time to reply. I am using the AT&T network.
Hey man, you gotta be willing to take that big plunge. Over in the Dev section there is some good info. But you gotta be willing to take that challenge on. Just be prepared to have a brick if you do it wrong.
BigRob1712 said:
Hey man, you gotta be willing to take that big plunge. Over in the Dev section there is some good info. But you gotta be willing to take that challenge on. Just be prepared to have a brick if you do it wrong.
Click to expand...
Click to collapse
It is really hard to brick your phone following the instructions here.
As long as you don't flash anything outside the AT&T Galaxy S2 Forums.
Id recommend Creepy's guide, Ive used this myself and can vouch for it. Avoid (no offense meant) using Zedomax's method to avoid the headache of breaking wifi and trying to get it back. and READ and RE READ before starting the process.
enjoy your soon to be freed phone
I very strongly agree with the advice to follow creepyncrawly's guide. Taking the time to read, understand and follow it will make the process easy and save you a lot of headaches. Don't be afraid to ask for clarification, but read, read and then read some more can't be stressed enough. Take it from a fellow novice.
I will continue to read and take the plunge soon. Definitely look into Creepy's guide.
Thanks to all that chimed in without lecturing.....
Try this link:
forum.xda-developers.com/wiki/ROM-VS-Kernel
mmarquis said:
Try this link:
forum.xda-developers.com/wiki/ROM-VS-Kernel
Click to expand...
Click to collapse
What link? Here ya go. http://forum.xda-developers.com/wiki/ROM-VS-Kernel
Sent from my SGH-I777 using Tapatalk 2
That's an OK summary of firmware, but the use of the word ROM as a generic term for firmware needs a little explanation.
A ROM, or read-only memory, is a computer memory chip that has machine executable code built into it when it is manufactured. The code can not be changed. Later models of the chip were programable, and were called PROM, or programable read-only memory which can be programed once, and ePROM, or erasable programable read-only memory, which can be reprogrammed. These type of chips were used in the earliest micro computers, up until current computers, to accomplish the first step in the boot-up process.
Smart phones do not have a ROM or similar memory chip. They use NOR, P-SRAM and/or One-NAND, forms of non-volatile flash memory. The Galaxy series uses NAND memory to store the firmware. The iPhone uses PSRAM.
The use of the term ROM to refer to the firmware which contains the operating system for the phone is merely a convention, but one which has a huge amount of traction, so much so that we all use the term. There are some who would like to see the term ROM disappear in favor of the term firmware, but that is unlikely.
xhepera said:
I very strongly agree with the advice to follow creepyncrawly's guide. Taking the time to read, understand and follow it will make the process easy and save you a lot of headaches. Don't be afraid to ask for clarification, but read, read and then read some more can't be stressed enough. Take it from a fellow novice.
Click to expand...
Click to collapse
+1 to this. Also, if you ever need help, you can check out the IRC channel. There's usually someone there that can help.
creepyncrawly said:
Are you using the AT&T phone on T-mobile? Just curious.
Just my personal opinion, but I would forget all the other sites, and youtube videos, and stick with what you learn here.
I'm not aware of such a guide. Some of the information is so basic that no one would think to make a guide for it. But I can give you one tip: in my guide there is a link to extra information for newbies. That can be fairly helpful.
In my opinion, my guide is the best, but if you must, you can also use Jivy26's how to root guide.
Click to expand...
Click to collapse
I believe I used creepy's guide, entropy's posts. Gotta focus on one thing: getting clockwork recovery mode on (CWM). Get that and you can load a from from here. Don't use rootwiz or anything else. Make XDA your some source.
Sent from my SGH-I777 using xda premium
Irc channell.... so many people in there can answer and if ur going to for some reason use zedomax tutorial.. as i did with my Mac do it with entropy daily driver kernel
im on my phone. expect terrible typos.
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
All i did to root my sgs2 was get the proper drivers on pc (kies installs them i believe?). Downloaded odin 1.85 and any kernel that has cwm (i used siyah). put the phone in download mode (lots of places tell you how to do this). Put the kernel in the pda spot in odin. And flash.
Now you have a rooted phone with cwm (if all went right).
then you just download your favorite rom (i used serendipity 9.4) and place on sd card. Boot to recovery. Wipe cache/dalvik cache and factory wipe. Then flash your rom.
That's how i did it any way
Must be something in the water...
murauder said:
All i did to root my sgs2 was get the proper drivers on pc (kies installs them i believe?). Downloaded odin 1.85 and any kernel that has cwm (i used siyah). put the phone in download mode (lots of places tell you how to do this). Put the kernel in the pda spot in odin. And flash.
Now you have a rooted phone with cwm (if all went right).
then you just download your favorite rom (i used serendipity 9.4) and place on sd card. Boot to recovery. Wipe cache/dalvik cache and factory wipe. Then flash your rom.
That's how i did it any way
Must be something in the water...
Click to expand...
Click to collapse
The bolded statement is inaccurate. If you followed this sequence exactly as stated, you were not rooted until you installed serendipity.
Noob to noob
The information creepy posted is the way to go. I used his superoneclick with root to get out of a failed clockwork mod loop back to stock with root.
The post was I777UCKH7OCD Root no BL.7z. This will give you clockwork mod recovery from which you can do further modifications.
The program is a 7zip file. READ about 7Zip. Follow the instructions.
Practice getting your phone into download mode (dry runs).
Don't panic.
After reading if you still have questions, read some more. All the information is here.
When you sucessfully root, look in the dev section and read about the custom roms/firmware and see how they operate, problems, successes before choosing.
Personally I like the AOKP by Task, but it is all preferences.
Good luck, you can do it.