hello im about to flash my first rom all i need is task29 to delete my current tilat 2 rom do anyone know how i can dwnload it and another thing. if my tilt 2 is unlock to any sim do i still need a hardspl please help thx.
All you need to know is [here]
You will need to HARDSPL your phone.
No need to perform task29 with mtty
Related
I have updated my phone x01ht WM5 to custom WM6 firmware,
before installing the wm6, i had install the Hard_SPL-V7
i wanna know, if i want to flash again to other wm5 roms, how could i do?
because when i was trying to flash the wm5 dopod rom (it loads the loader) but stop flashing, error said USB connection failed..
any advise pls reply, thanks... i am very noob at this level
Follow THIS guide. You will be able to downgrade to WM5 again but it is not as simple as running the RUU.
(pof im adding the warning dont worry)
Hi,
If I load HardSPL onto my Touch Dual, and I want to load a ROM - will I need to go through the SPL (soft/hard) process each time I want to try a ROM or if I load HardSPL once, that's all done and and I never need to do it again?
Thanks
yes,, HardSPL mean you never need to install another SPL again to keep flashing ROMs
Thanks for your help!
hey,
im following tis forum for a while now and read about flashing roms and using hardspl and such, but i dont get it. i dont know which step to take first, which rom is best to download. i really like the s600 display driver to be in the rom. because that will make my mobile alot faster
can somebody explain to me how to flash my touch dual?
got wm6.0 ATM
btw im dutch, so if anyone dutch can help me (msn maybe? )
thank you very much!
PhoenixNLx
First backup anything you like to keep. Installing HardSPL will erase all data
Install HardSPL:
http://forum.xda-developers.com/showthread.php?t=355730
to install HardSPL you need to download:
SSPL 1,16
http://forum.xda-developers.com/attachment.php?attachmentid=63902&d=1199210757
HardSPL 1,15
http://forum.xda-developers.com/attachment.php?attachmentid=73353&d=1204286404
and Flash-uspl-niki
http://forum.xda-developers.com/attachment.php?attachmentid=63944&d=1199227284
and then just follow step 1-9 (skip 7)
when this is done, it will enable you to flash any rom of your choise
After flashing my charmer with wm 6.1 it was stuck at the Boot Screen and my phone no longer made a hard reset as it give formatting failed error.
Then i went to download an official WM5 rom from Tmobile, then I went into bootloader and successfully flash the official ROm. But again format error
Now it just shows
IPL 3.08
SPL 3.08.0000
GSM 02.69.21
OS 3.8.2.21
I tried the prophet ROM flashing as advised somewhere else but it failed at 95% giving me invalid nbh error
In the past I had successfully solved the problem by flashing the prophet ROM but this time .......
Any complete help or specially cooked Prophet ROM for this type of recovery...
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
rmagyar said:
You better not to flash Prophet ROM to charmer. Charmer wiki, compatibility section
Click to expand...
Click to collapse
But this is for recovery puposes as described somewhere else
Nobody seems to be interested to take pains in solving my problems
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
ChrBeck said:
I do.
You have to flash with a SDcard. Search the Propet and Wizard section to find out how it works.
Click to expand...
Click to collapse
Thanks Mr ChrBeck!!!
But I think that some way of downgrading the the SPL to 2.?? from the current 3.08 would allow me to install the PROPHET ROM for recovery and then it would be possible for me to upgrade to orignal WM5 ROM and then upgrade to your lovely ROM that I had before your latest upgrade.
Am I right or if not then can you give me the necessary files and instructions for the sd card recovery method.
Please help me as no one in my locality knows much about CHARMER and simply unable to help me in this aspect.
Thanks again.
Dr.Zia ur Rehman
I'll try to help you. In the Wizard forum there is a sticky whitch tells how to do the SDrecovery. Just search it. With the SD Card you can just fully flash a ROM. You can't downgrade anything because downgrades are looked.
If I'll find the sticky this evening I can post the link here.
Cant there be some kind of HARD SPL for this ..... charmer that would allow me to flash the prophet ROM fully. In this way I had recovered my CHARMER but I think that at that time it had lower version of IPL or SPL so the full PROPHET ROM was sucessfully installed and I was able to hard reset and flash the orignal T-Mobile ROM that I think upgraded my SPL too!!!
There is no hardSPL. Noone ever designed one. And if the Prophet trick doesn't work you can try it with a G3 Wizard ROM too. But if that doesn't help to search for the SDUpdate!
To do an SD update you must have a ROM dump on SD card from bootloader.
Method can be found here. Section 8. OS, GSM Image Reflash Procedure
Thanks for finding it for us. There was a time I read this manual completely but I don't know much of it anylonger.
Charmer needs to be CID unlocked to perform SD card flashing.
I agree. I just forgot to mention this.
Then forget it. You can't CID unlock a 2.x or 3.x. So this method is out.
How can I confirm that my charmer is CDI unlocked???
Any if this is the case then what to do with my poor CHARMER....
ANY HOPES OF ITS RECOVERY in some other manner???
Also can you post link to the wizard ROM you mentioned in your post for recovery ???
THANKS IN ANTICIPATION !!!
Well, you have a boatloader over 1.x right? If so your device can't be unlocked. But you can try to flash any WM5 ROM for Wizard. But be sure it is jast the ROM. No phone or bootloader in it.
Maybe that works.
Would you be kind enough to post a link to the proposed ROM to which I can give a try?
Is this would be possible to flash any specialiy cooked Prophet ROM only with OS as the complete Prophet ROM (with no ID RUU)gives me error at 95%.
Further isn't there a way to downgrade my spl that would allow me to flash prophet ROM that confirmly worked for me in the past.
Please help i am in great trouble.......
ok guys im not a total noob in flashed but id like to be safe than sorry...so anyone can point the way to a step by step on hardspl hermes? lol this is well my forth fone being flashed(2x wizards,kaiser) killed my first wizard flashed G3 rom on a G4 i knw i knw i suck.lets hope that never happens again.anyway any feedback will help thankz.
Go to the sticky about Hard SPL, download Hard SPL V7 from 1st page then go to page 116, post 1160 for sd card method...
Hope this helps...
yeah thankz will check it out
Check out this link, i think it'll also help u out
http://www.mrvanx.org/thg/index.php?option=com_content&task=view&id=16&Itemid=26
ok thanks guys got my hermes yesterday and downloaded hard spl v7,quick question do i need to install sim and cid unlocker v3a or should i just run the hard spl Ruu and flash it?
1 more lame noob question lol do i have to flash my rom with the sd card method?
Sim and CID unlocker is required just to unlock ur ppc to use on any sim, as the super cid function is already merged in hard spl v7.
Try to use the sd card method, as the risk factor is minimal in this method as compared to active sync method. as there are may cases of broken usb connections here.
hey guys thanks i finally did it!!!! i used activesync method because only getting my sd card later on today,my bootloader is now ipl 1.04 spl 2.04 olipro. heres the steps i followed firstly downloaded hard spl v7,then fully connected to activesync,i ran the RUU but instead of getting the red option like everyone descriped it said "force sspl" anyway i continued and followed the prompts and it worked!! so now i got my herm200 ready to flash a custom rom.thanks to everyone who helped and happy flashing guys....one last question though now after i download a rom of my choice can i just run the RUU and flash it?
sorry posted my new spl wrong. its ipl 1.04 spl 2.10.olipro
Cool, yeah you should be able to though I'd use the sd card method to flash - just drop the steps using SSPL.exe... Its a hell of a lot safer and I wouldn't do it any other way for a radio rom, stuff up a radio rom flash you can pretty much kiss the phone functions goodbye...
Cheers...