I'm on orange uk, trying to sort the phone out with the 2.1 update. In theory this is all via OTA updates, but it turns out that you can't get the second half of the update unless the phone was on a certain rom version before receiving any OTA's...
basically I need to replace the current rom with the official one offered by HTC on their website, which will then be able to successfully update OTA.
HOWEVER. My hero is completely failing to connect to a pc these days, so I can't use the rom update utility. I can put the SD card in a reader and transfer files that way. Is there any way to update the rom on the phone like this?
Not rooted, I've not tampered with it at all yet.
Thanks!
There is no way of taking the one off the HTC site and loading it from your SD (it runs on the PC...)
If you look on the dev forum there are loads of update zips that are the official ROM only converted to an .zip (and normally with Root permissions added) and the radio stripped out. That should still work I think.
okay, why would I want the radio stripped out though?
And how do i update the phone using the zip? Some boot option?
thanks for the help
forum.xda-developers.com/showthread.php?t=628146&page=2
post 20 at the bottom of the page- is that the .zip im after?
cant post a link cos im new, gah!
2.73.61.66 was the last orange branded 1.5 update which enables FOTA. basically its what youre looking for.
flash to that rom, and the update should become available to you as soon as you connect to wifi.
you update the phone by a .zip by installing a custom recovery.
looks like youve got reading up to do.
okay, i got amon ra on the phone, flashed to the official 2.73.61.66, got the prompt for OTA update....
and when it rebooted to install it, i went into amon ra recovery, which seems to block it, so I can't continue.
Should I remove the recovery image and replace it with stock, then hope that OTA's work as they're supposed to? How do I do this (ive found a guide but its for a different phone and required usb connection to pc, which is broken on my hero)
OR, can I flash the stock 2.1 update directly instead?
thanks
pizza65 said:
okay, i got amon ra on the phone, flashed to the official 2.73.61.66, got the prompt for OTA update....
and when it rebooted to install it, i went into amon ra recovery, which seems to block it, so I can't continue.
Should I remove the recovery image and replace it with stock, then hope that OTA's work as they're supposed to? How do I do this (ive found a guide but its for a different phone and required usb connection to pc, which is broken on my hero)
OR, can I flash the stock 2.1 update directly instead?
thanks
Click to expand...
Click to collapse
If you're wanting to get back to stock, you need to get the stock recovery on. But ideally, you need to flash the RUU (with USB)
I've got the stock 2.1 update on it at the moment, since nothing else would go. Still get low signal compared to other phones, some bits are bizarrely slow (people app sometimes takes 20 seconds to load, other times 1 second, both straight from boot). Hum. Still there are a LOT of improvements in 2.1 which are welcome!
thanks for the assistance guys
Related
I am trying to root my HTC Hero(Orange uk) but i keep running into a problem, im trying to copy the new recovery ROM to the phone but it keeps telling me that remote access isnt allowed. Also i can't use the flash rec method.
I previously had a rooted and custom ROM on here but removed it as some things didnt work then upgraded to the latest official HTC ROM (2.73.xx) and now i can't mdoify the recovery image.
sorry if i have been a bit vauge with my message but does anyone know how to overcome these problems?
Cheers
John
if you flashed the latest RUU update you need to create a goldcard and downgrade. using RUUs is generally the last option if you can't get your phone to work, because if you install the latest version you don't have any security holes that you could use. luckily there is the goldcard method, although it is a PITA (never did it, just read about it...)
not sure how this worked but i reinstalled the latest RUU and then installed flash rec and it worked
would be interesting to know what you did (with version numbers), so that question would be answered...
not gonna try though, don't want to get stuck with a generic rom
Hey everyone, I am new to the rooting world however I have only experienced good things. I decided to root my thunderbolt using TB Autoroot+htc sync last night(had the original stock froyo, was going to installed cyanogen mod 7) and was successful. Unfortunately, I then installed the leaked 2.3.4 RUU GB which rerooted my TB before I installed the cm7(wanted to try the RUU out, bad idea lol). I was wondering if all or any of these are possible (dont care about losing data, just don't want to brick, ie avoiding command lines if possible):
1. root the phone while maintaining the leaked 2.3.4 RUU, just as was done for FROYO? Original reason for rooting was to remove the bloatware apps, but not having custom roms would be ok at this point if that is this is the only option. I know there is the revolution method to root, however will that work on the leaked 2.3.4 RUU?
2. root the tb with my current 2.3.4 RUU and install the BAMF 2.3.4/sense 3.0 GB build, or some other custom 2.3.4 rom?
A tutorial or walk through would be great! I know there are some out there, however I am looking for one specifically for those that have the leaked 2.3.4 RUU on the thunderbolt.
Also, can someone explain the difference in features of the GB builds that have been out for some time(customs) vs the RUU by verizon? I'm not talking about the physical aspects or the apps that come with, but more in terms of installing/switching between them. I know I need to root in order to install the custom roms, but assuming i can root the 2.3.4 RUU, will I be able to install any other 2.3.4 rom such as BAMF or cyanogen without problems? I have heard that you just arent allowed to go backwards, ie back to Froyo one you update to GB, but I should be able to install any 2.3.4 GB ROM once rooted via the bootloader(power+volume down) True?
Any help would be great! Thanks!
Yes you can. Just use revolutionary to root the new GB build. Here is a video tutorial for you.
Well, here comes your first less than pleasant reply...
Pretty much everything you wanted to know is posted in my thread stickied in the Q&A section. That's also where this post is going to end up. Please check my thread on basic noob questions, search before posting, and post in the correct forum.
Ota update after root
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Jeovanny said:
I just got this thunderbolt replacement in the mail. I noticed OTA was trying to update so I hurried and pulled the battery to intterupt the update since it was in the version I needed to be to ROOT. Ok I went ahead and ROOTED the phone then updated my RADIO (wich by the way is a big difference without it, it wont stay in 4g) ok so I think im good to go when I see the phone is trying to do a FIRMWARE update again, I dont know if this will ruin my root or phone so Im in airplane mode till I find out what to do. I dont know how to turn off automatic update and I dont want to mess up my root or phone. WHAT DO I DO PLEASE HELP!!!
Click to expand...
Click to collapse
If you are rooted, just use a program like root explorer to search for a file called otacerts.zip and rename it to otacerts.bak
When you open root explorer, make sure to put it into write mode. look at the top left side of the program and press on the mount r/w option
Cant find rom
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Jeovanny said:
I want to flash rom but I cant find it in my sd card through rom manager and also through recovery any suggestions its in the root of the phone highest directory
Click to expand...
Click to collapse
If you used your phone to download a rom, its in the "download" folder, move it to the root of sd card
Sent from my ADR6400L using XDA App
Root Error
I am trying to Root my Thunderbolt but keep getting the following error:
Failed to get Root!
I am using revolutionary.
I have installed, made sure their was a connection, and then removed HTC Sync.
I downloaded and installed Android USB Drivers.
I selected USB Debugging
Thunderbolt Info:
HBOOT 1.04.000
Android 2.3.4
ROM Ver 2.11.605.9
What am I missing and where can I get it? Can anyone help me out with this? Thanks in advance...
I've never rooted but I believe you need to downgrade. Revolutionary does not work with the latest OTA. There are several posts around that explain how to downgrade to the previous OTA (link below). Then you should be able to use the revolutionary method.
http://forum.xda-developers.com/showthread.php?t=1401959
Sent from my Thunderbolt using Tapatalk
Yes you need to downgrade to 2.11.605.5 then use reveloutionary
I have a rooted Amaze with just some bloatware removed. Yesterday I received a notification in the status bar that a system update was available. When I try to run the update the phone reboots and then freezes with a big green X on the screen. Doesn't look like something official. Has anyone seen this before or know what it's about? I'm thinking maybe it's just failing to run the update because of being rooted or a related issue but can't find any info on Google about the green X.
I finally pulled the battery out because it wouldn't respond and then turned the phone on again. It booted fine and I still have the notice about the update. I'm reluctant to try again until I find out what's going on. Thanks.
I don't think you're able to install an update through a custom recovery..There should be a ROM with that update already in it.
If you have a Custom ROM you can't take the update that is intended for stock unrooted ROMS.
Sent from my HTC Amaze 4G using xda premium
Thanks for the feedback. I don't have a custom rom - just the stock minus some bloat. I can see how the custom recovery, however, might interfere.
I can't find any info on the update and what it includes or why I might want/need it but assuming it would be good to install then is there an easy way to remove the custom recovery? Would running the stock update.zip do this or do I need to go through the full un-root process?
If you have CWM recovery already,
1. Go to /downloads folder inside the internal Storage. You can find the OTA.
2. Rename it to "update.zip" and copy to External SD.
3. Reboot the device to recovery.
4. Select update.zip and update manually.
5. After update & reboot, delete both original files to get rid of notification.
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
droidux said:
Thanks for the directions. Tried and got this error
Code:
verifying current system...
assert failed: apply_patch_check("/system/app/FriendStream.odex", "some very long hex number", "some other long hex number")
E:Error in /sdcard/update.zip
(stage 7)
Installation aborted.
Click to expand...
Click to collapse
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
skr_xd said:
Seems its not possible as you have removed some programs
Think you removed friendstream also.
It seems to work only if the ROM is unmodded
Click to expand...
Click to collapse
Yes, I removed facebook and friendstream. Not sure why those would be necessary to run a system update but you may be right about not being able to update a modified phone. Maybe the update isn't anything I need anyway if it wants to update an app I don't want.
Thanks for the help.
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
droidux said:
In case anyone has a similar issue, here is what I've figured out.
The update won't run on a modified system - even if it's a stock, but changed, rom. In the interest of exploration, I restored my backup using clockwork and then ran the update. It still didn't work, but following skr_xd's advice above I was able to run the update manually. The result was a more or less stock phone without root but with the most current software. I then re-rooted the phone and re-removed all the bloat with no apparent ill effects.
Thanks for the help.
Btw, I didn't know what the green X was all about, but I think it's related to clockwork mod. Could be wrong though.
Click to expand...
Click to collapse
yes its the custom clockworkmod i made
xboarder56 said:
yes its the custom clockworkmod i made
Click to expand...
Click to collapse
Thanks for the confirmation and awesome software. I noticed there is work on version 5.0.2.7. Assuming it would be wise to update once released.
Same issue here. I have stock rom without any bloatware removal.
I just unlocked the bootloader than installed CWM and rooted the phone.
when I try to update phone OTA it stucks in splash screen (With Big Green X logo)
Flash prerooted rom you good to go
Sent from my HTC Amaze 4G using xda premium
I just spent abut 4 hours trying t figure this out...
This is my journey..
Relock bootloader
Flash one of the stock tmobile ruby rom in development section
Did the OTA update on stock
Unlocked my bootloader again
Then i tried to root using one click zerg method but it didnt work
So i flashed clockwork mod using fast boot
Then applied a su binary update i found in the development section.
In less than a minute i got root back.
Then i restored my data from nandroid backup.
My phone is pretty much rooted, bootloader unlocked, bloatware free alongside having the ota update that enabled wifi calling installed.
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
bmbrad said:
You don't need to relock your phone to do the update. If you do xboarder's recover to stock method just skip the relock part you can update your phone. So far going back to stock is the only way to get the radio updated as well which I am noticing way better 4g coverage than before!
Click to expand...
Click to collapse
working on a way maybe this weekend will have it ready
xboarder56 said:
working on a way maybe this weekend will have it ready
Click to expand...
Click to collapse
NICE! Dude you must never sleep! Always the first to get something done!
I figured out what to do. You just need to rename this update file to update.zip. then reboot in recovery and choose install update from sd card. Next navigate to download folder and install update.zip file. You will be updated and stay rooted at the same time.
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
darll said:
This worked for you because you didn't remove any of the t-mobile bloatware from your phone.. This will not work for people who messed with the pre-installed bloatware.
Click to expand...
Click to collapse
Maybe, but 8m I've got another problem after updating this way. Wifi doesn't work anymore. I receive an error while trying to switch on wifi.
I have the sprint EVO3D. I unlocked it and its rooted, but at the moment I'm still running the stock image. I keep trying to install the latest OTA update from HTC (the one that removes CarrierIQ) but it keeps failing to install...no message, no error, essentially the phone just reboots when I tell it to install the update.
Does it have something to do with CWM being flashed for recovery? I'd like to have CarrierIQ removed. Is there a way around this that anyone knows of?
I had CM7 and MIUI installed at one point, but I wanted the 3D camera that I don't get with either of those.
DarkNemesis618 said:
I have the sprint EVO3D. I unlocked it and its rooted, but at the moment I'm still running the stock image. I keep trying to install the latest OTA update from HTC (the one that removes CarrierIQ) but it keeps failing to install...no message, no error, essentially the phone just reboots when I tell it to install the update.
Does it have something to do with CWM being flashed for recovery? I'd like to have CarrierIQ removed. Is there a way around this that anyone knows of?
I had CM7 and MIUI installed at one point, but I wanted the 3D camera that I don't get with either of those.
Click to expand...
Click to collapse
If you're running into issues applying an OTA while on a rooted ROM, my first suggestion would be to suggest you grab a rooted stock ROM which already contains the OTA.
The steps to installing an OTA are fairly simple, but if done improperly whether due to lack of following directions or any other myraid of reasons, COULD damage the device or at least set the user back a few hours.
In order to process an OTA with 100% certainity, the stock recovery should be loaded. Manufacturers ARE able to add and use edify scripting language which could only be interperted and executed probably by a stock recovery image as they are not required to release the source code to their recovery image.
With that said and no mention of htc official unlock or revolutionary unlock, the process I would take on my own personal EVO 3D which would be unlocked with revolutionary is as follows:
1) Flash stock recovery image from most recent RUU via Flash Image GUI while in normal android mode.
2) Accept OTA and allow to fully process.
3) Flash custom recovery back using a PG86IMG.zip file.
4) Boot into custom recovery and via adb shell chmod 4755 /system/bin/su.
5) Reboot and everything should be set.
Another word of caution will be at step 2 to understand this will remove root access by removing the setuid flag on the /system/bin/su binary. This will be restored by step 4.
These steps might have to be tailored/changed for an HTC unlock device. Probably step 3 can be replaced by the fastboot flash recovery c:\recovery.img command.
Hope that helps!
Yes, it is because of CWM. You need the stock recovery to update officially.
Where would I download the stock recovery? I tried googling for it, but wasn't getting any straight answer that I could understand...
http://forum.xda-developers.com/showthread.php?p=22554153#post22554153
There you go
Just download a stock rooted rom zip and flash it. Much easier, and much less hassle than trying to go back to the stock recovery.
Thanks everyone, got stock recovery flashed and update is installed...now to get my apps reinstalled
sitlet said:
Just download a stock rooted rom zip and flash it. Much easier, and much less hassle than trying to go back to the stock recovery.
Click to expand...
Click to collapse
I agree, but the man wanted the stock recovery, so the stock recovery is what he got lol
DarkNemesis618 said:
Thanks everyone, got stock recovery flashed and update is installed...now to get my apps reinstalled
Click to expand...
Click to collapse
Glad it all worked!
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
scott500 said:
If anyone is interested, I saw this posted today. A small OTA update released by AT&T today.
http://www.androidcentral.com/att-pushes-out-update-htc-one-m8-brings-android-444-and-hd-voice
Click to expand...
Click to collapse
This is merely a rumor. The ATT link is to the old May 2014 update.
Pay no attention.
The link to the att sight yes is for old 1.58 build, does not mean there isnt an update coming...as its being reported with a build number by more and more sights, could just be a rumour but it could also be rolling out.
Well, they finally released the update today. Finally have 4.4.4. On my m8. Now to wait for lollipop
Does anybody know where the OTAPkg file gets downloaded to? I'm trying to preserve the file and not have to download it again and again after a fail update. Thanks.
Edit: n/m found it, it's under the FUMO folder within the internal SD.
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
johnnyutah22 said:
Please save a copy. We need it for a custom rom
Sent from my HTC One_M8 using XDA Free mobile app
Click to expand...
Click to collapse
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
bford152 said:
I'm lost. I installed the 4.4.4 OTA, installed the latest CM12 nightly, and now I have no cell service nor options to select/enter an apn. Under apn it states "access point names not available for this user" HElP?!
ALSO, what custom roms can I run using this 4.4.4 OTA?!
Click to expand...
Click to collapse
I can't help you with CM12, but I just installed Viper One and it seems to work fine.
I updated to the 4.4.4 via OTA yesterday, and Viper installed without a hitch.
NB: Make a Nandroid Backup before flashing please.
Whats the best way to update my girlfriend's rooted M8? Currently running 4.4.2 rooted S-ON. Can she just take OTA and then will have to re-root?
I'm S-OFF on my phone so I haven't had to deal with this. Already updated my firmware months ago and have been running 4.4.4 roms.
Thanks!!
Downloading it now.
You'll have to re-flash stock recovery, take the OTA update, then restore twrp (or other custom recovery) and re-root.
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
jeremyenos said:
Same situation here I think... stock rom (never changed it yet), rooted, unlocked, s-off. Downloaded OTA then realized I needed to flash original recovery back. Did that, now AT&T sw update is of course telling me to wait 24 hours to check again. Any way around that?
Click to expand...
Click to collapse
Yeah just manually change the date one day ahead and try it again. It might take a couple of secs for it to prompt that there is an update.
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Also is there anyway to flash twrp without using a pc? I tried flashify but it doesn't seem to be working cause it would revert back to the fastboot no matter what.
Click to expand...
Click to collapse
There's a boot loader flashable twrp in the dev section posted by jball
dottat said:
I just posted a pre-rooted ruu in the dev section.
Backup data in twrp to your ext sd. Flash ruu via sd card method. Flash twrp using the free app flashify. Reboot to twrp and restore data.
No pc required.
Just make sure you backup files on internal.
Click to expand...
Click to collapse
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
johnnyutah22 said:
I noticed that flashify also will install CWM or Philz. Is your method specific to TWRP or can you use the others. The reason I ask is because I currently use Philz and would need that to restore my backup.
Click to expand...
Click to collapse
You can flash whichever you use.
I thought I read where this update would include the EYE Experience. Did I read that wrong or do I just not know how to use my camera anymore?
volcalstone said:
Could someone help me with the OTA update. I'm on stock 4.4.2 rooted and s-off. I placed back all the at&t crap in systems and tried my best to restore everything back to stock even recovery. I'm still getting a red triangle approx like 1/4 the way during the update. What sucks is that I have to download the whole update file again and it's 800+megs versus the prior updates which were a lot smaller. It's just very time consuming and would like to find out the root of the issue is.
I've done so many mods on the phone like the HK mod and various other ones. I'm trying to think back now to see if there is anything else and now I'm stuck. I don't want to restore my stock nandroid cause I would have to install everything all over again which would suck big time. I uninstall the drivers for viper4android, xposed, and even reverted the host file back from adaway. I just feel like there might be something within the system files that isn't suppose to be there. I even got rid of the att boot logo and sound but I had restored that back to stock as well. Please help if you could. Thanks.
Click to expand...
Click to collapse
I don't think root changes are the issue; as typically it will fail before it even goes into recovery with a message that the system has been modified. It might just be a bad download.
Setting up your phone again is really not that bad a proposition; especially if you use Titanium to restore apps. And it will also restore your Xposed installer and modules. Using Titanium, I can easily be up and fully configured again in about a half hour after a factory reset or RUU. Although, of course this will depend on the amount of customization in settings, etc.
You might consider updating with the new RUU (relocking bootloader required if s-on). Not only will this bypass the OTA install issue you are having, but makes for a cleaner install. Yes, you will have to set the phone up again; and you will also need to backup any data on internal storage, as it will be wiped by RUU.