[Q] Can't login to HTC Twitter! - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

I tried to search for my problem in our forum and I didn't find any ..
I can't login to HTC sense Twitter through GPRS or 3G connection .. I Only be able to connect through PC connection when my device is connected to the PC by the USB wire ..
it gives me this message when I try to login with GPRS or 3G connection:
Login Error
There was a conncetion error while attempting to login
My HTC HD2 is : HTC HD2 8250
I am useing refrence rom v.: 1.66.415.9
Radio v.: 2.1050.08_2
Protocol v.: 15.37.50.07U
I am useing Co0ki's Home v.1.8.5.1
I faced a similar problem with my E-mails accounts, but I found solution in editing the "Advanced sever settings" of the E-mail accounts by changing the "Network conncetion" to GPRS Provider's Name instead of "The Internet" ..
I can't find similar setting for HTC Sense Twitter.
Please may any one Help me ??

Wish I had a solution. Ran into this twice after hard resets. First time I just kept on trying to login & eventually it worked....weird but it worked.
The second time I'd accidentally denied permission to download content after hard reset, but when I went to weather panel and updated it, I was asked to give permission to dl content & that made my Twitter work.
Again, I know it's not a big help, just relaying my experience & hoping it can help you or someone else.

This has happened to me twice before once...was when I installed cleartemp and when i had it do a full scan it would not work,,kind of like it deleted some sort of file it needed to work....then it did it again once i installed memory maid..and it appears the same sort of thing happened. Now I keep those things and use motweets

thank you guys for your care ..
I still hope that someone can solve this problem .. until then, I will try what JonnieLasVegas said ..

make sure u hv logged urself out of the desktop or laptop PC.

Loin in Start/Settings/Connections/Account Manager. Ok!!!

Thank you Mr anhphe076 , Thank you qanoon302..
I do what you said and ....
it worked !!!
I just log out of my Twitter from my PC .. and try to login by HTC Sense Twitter ..
and it works!!!
Thank you Qanoon302
Thank you guys for your precious concern !!
Thank you very much

I had the same problem and seemed to be 2 reasons for it:
1: Very weak signal strenght
2: I changed both option from settings-connections-connections-advanced-select networks to my rovider name (orange internet for me)

Hi, this solved my problem too. Thanks a lot!
I was experiencing the following on my Diamond2:
- Sense would crash and restart when I hit the "Update now" button on the Twitter tab
- PockeTwit would not refresh my timeline, sometimes with a communications error sometimes without error
This would go on for over 24 hours.
Logging in and out on twitter.com from my home PC finally solved this problem. Weird thing is that this PC had been switched off all the time. I also logged in and out on twitter.com from another PC before my home PC, which didn't solve the problem. So, apparently, there was some session on twitter.com from my switched off home PC, that blocked both Sense and PockeTwit from properly accessing Twitter.

Thank You razvan_real_one,
thank you mr deechte for all your contributions

Nothing above solved my problem
I've got the message that my username/email or password are incorrect.
Tried to log on/off from my pc, try from settings/account manager - nothing
I'm using wireless connection, so it is not the problem with the connection speed.

georgekg said:
Nothing above solved my problem
I've got the message that my username/email or password are incorrect.
Tried to log on/off from my pc, try from settings/account manager - nothing
I'm using wireless connection, so it is not the problem with the connection speed.
Click to expand...
Click to collapse
+1 same problem

georgekg said:
Nothing above solved my problem
I've got the message that my username/email or password are incorrect.
Tried to log on/off from my pc, try from settings/account manager - nothing
I'm using wireless connection, so it is not the problem with the connection speed.
Click to expand...
Click to collapse
any solution as of yet...???

I couldn't find any solution yet

contact HTC support
I've contacted HTC support, You schould do also

Tréo500 said:
I've contacted HTC support, You schould do also
Click to expand...
Click to collapse
They are morons (i mean HTC support). No point to contact them...
I've contacted them about 6 times and always we are stuck on "Install latest ROM" or "Hard reset your device" which does not solve the problem at all ...

same problem.. email/username or password are incorrect.
this happens only with twitter.
btw, im from the neherlands

@issy_i
Report it to HTC support !

Twitter Tab now works. Can login and receive messages. However, I am not certain on the security level.
Thanks

Solved
Loged into my Twitter account on pc, changed my password and closed my account on the pc.
After then I was also able to log in HTC peep on my HD2 with the new password

Related

Can't Sync ??? HELP!!!!!

I am using an XDA upgraded to WM2003SE. It has been working great for 2 weeks with some minor gliches here and there. Suddenly today it will not sync. Tried soft and Hard resets to no avail. Can some one make a suggestion?
Dear tsuyokikan,
I think your information is not sufficient. Please check your outlook whether it is still active and that the sync account (account that you choose to sync your XDA with outlook) is still accessible. My gut is that the problem may not root in your XDA device, so do also check the outlook functionality.
Any progress on this, please tell me. HTH
Cheers,
Ken
Dear Ken_xda,
It appears to be some kind of issue with the phone. I had recently upgraded to Active sync 4.0 and was able to sync once and that is when all the trouble started. I even tried removing Activesync from my PC and reloading it. When I attempt to sync the sync software comes on and makes the connection sound but my XDA does not respond with the connection sound like it had previously. Thanks for any help you can provide.
Sincerely
Jeremy
As much as i know, WM2003SE does not start automaticly on the Wallaby device.
Have you tried to run it manually on your device?
Stefan
Stefan
Yes, I did try that. I simply do not understand this. It had been working totally fine and then it just went whacky.
Still Can't Sync?????
Have benn working on trying to sync all afternoon. Iread the owners manual, tried setting up new syncs and nothing works. I did find an error message on the XDA under Activesync which reads: Unable to connect. Verify your dialup or proxy settings are correct, and try again. Does anyone have any ideas?
It looks like its trying to connect to internet.
In my Navbar under connectivity it shows my phone service and then under that it says The Internet and net to that it says PC connection. Could this be my problem? If so how do I change it so I can Sync again. Thanks in advance for any help.
Jeremy
hi guys this is a problem to me also http://img50.imageshack.us/img50/7977/asyncerror0hw.png
how can we solve this problem? my problem is i can't sync to my PC

ActiveSync not connecting on StarTrek

Dear All,
after plug my startrek to usb activesync starts and identified it and the local network connected but after seconds it disconnect from the activesync.
i'd search all the net for a solution but not finding any.
mabey the drivers?
anybody could give me the drivers for the activesync 4.5 on starttrek
thanks alot
Maddening, I just went through the same thing. Drill down into Microsoft's site, there's some additional info on reconfiguring your usb port, it was just a button, on/off kind of thing so if it's X try Y and vice versa. That solved it for me, sorry I can't be more specific but I didn't write anything down. I did get the initial link from the activesync trouble shooter however.
in my case my firewall (zone labs) was the cause.
thanks alot for replay
i've went through all the microsofts' but nothing, it still connect and disconnect.
thier is somthing else.
the below site may help others have same problem.
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx
http://www.microsoft.com/windowsmobile/help/activesync/troubleshoot.mspx
any new news because it's still disconnected?????
WindowsScorpion said:
any new news because it's still disconnected?????
Click to expand...
Click to collapse
Hi, extract the Reg file from this Zip and run it on your PC, n reboot. Had a similar problem on mine, and it worked

ProphetTouch - Async4.5 - Not enough mem

Hi there,
I flashed Prophet Touch 4MB. Great Rom.
One big problem - I cannot sync my contacts with Outlook and
Active sync 4.5. I always get the nasty error - Not enough memory on the PDA (or something like that). What is that? Is there a solution for that problem? I really need the contacts for my business!!
No additional software intstalled pure Prophet Touch - Nothing changed at all.
Second thing:
Wireless Lan works - connected - but i cannot open internet pages with IE!
Thanks in advance
Boris
boris03 said:
Hi there,
I flashed Prophet Touch 4MB. Great Rom.
One big problem - I cannot sync my contacts with Outlook and
Active sync 4.5. I always get the nasty error - Not enough memory on the PDA (or something like that). What is that? Is there a solution for that problem? I really need the contacts for my business!!
No additional software intstalled pure Prophet Touch - Nothing changed at all.
Second thing:
Wireless Lan works - connected - but i cannot open internet pages with IE!
Thanks in advance
Boris
Click to expand...
Click to collapse
Most probably you have a lot ot opened programs - go to settings->memory and close everything. For the wireless connection the problem might be caused by proxy settings
Thanks,
But of course I closed all programs/everything. I even closed the phone connection and closed the comm-Manager. No change.
Still not enough memeory on the PDA
For the Wireless Lan - What do you mean with Proxy settings?
I don´t use any proxy. Not before - not now
Thanks
Boris
boris03 said:
Thanks,
But of course I closed all programs/everything. I even closed the phone connection and closed the comm-Manager. No change.
Still not enough memeory on the PDA
For the Wireless Lan - What do you mean with Proxy settings?
I don´t use any proxy. Not before - not now
Thanks
Boris
Click to expand...
Click to collapse
You need to do a HARD RESET
easy way of doing it is go to
Start ----> Settings -----> system-----> Clear Storage -----> type 1234 in the box and press yes -----> now phone restarts and sets up again and everything will work...
boris03 said:
Thanks,
But of course I closed all programs/everything. I even closed the phone connection and closed the comm-Manager. No change.
Still not enough memeory on the PDA
For the Wireless Lan - What do you mean with Proxy settings?
I don´t use any proxy. Not before - not now
Thanks
Boris
Click to expand...
Click to collapse
If you have closed everything than I really cant tell you more. I am using the 8 mb version and it is syncing fine. I suggest you try it. Now for the proxy settings - just look in settings->connections->connections and see if there is a proxy in there. Battery status plugin has also an option somewhere which disables proxy wen WLAN is switched on. Good luck!
O.K, I see gullum has given you the right answer
Hi Gullum,
Yes I did. No success - always the same silly error message. Not enough Memory - It is resistent :-(
By the way - How many memory should be free after plain installation of your 4MB nothing else? Tried already the 8MB - same error.
And the internet problem - any idea?
Thanks,
Boris
boris03 said:
Hi Gullum,
Yes I did. No success - always the same silly error message. Not enough Memory - It is resistent :-(
By the way - How many memory should be free after plain installation of your 4MB nothing else? Tried already the 8MB - same error.
And the internet problem - any idea?
Thanks,
Boris
Click to expand...
Click to collapse
Did you downgrade to WM5 before uppgrating to Prophet Touch? this activesync is only related to a flash problem something you did wrong when flashing.... and the wifi problem is probable also because of the same reason.
can you open contacts? or does it just show for 1-2 sec and closes?
Hi,
I followed the Guide you provided. Worked without any error.
Ok the first time I used SBP backup in WM5 to backup my contacts and figured out that SBP cannot read the contacts in WM6 (Bad software).
So I downgraded again and synched with Outlock first.
Then I upgraded again to Prophet Touch4MB and tried to sync with that silly error - And now i am getting -> Not enough Memory
Boris
And yes the contacts just come up for a second (but empty as far as I see).
Thanks
Boris
boris03 said:
And yes the contacts just come up for a second (but empty as far as I see).
Thanks
Boris
Click to expand...
Click to collapse
then you havn't hardreset properly that only happens when you havn't done a proper hardreset
gullum said:
then you havn't hardreset properly that only happens when you havn't done a proper hardreset
Click to expand...
Click to collapse
He's right Boris... '
Just follow his HR instructions from a few post before and all should be fine. Or do a Hard Reset the classic way:
Hold Cam and Comm button pressed, punch the reset hole with the stylus. Release the stylus but keep buttons pressed. A message whith with letters on a black background will tell you to press the green receive button to format, so press the receive button with the green phone-symbol. Release the cam ans Com button and the on screen message tells you that it is formatting and within a second that formatting is completed. release everything and your device will start up neat and clean.
SPB Backup is the bug !
Thanks and yes you are right.
I did hard reset again and when the device is booting active sync gets started automatically. And then it starts sync including the contacts.
After that I have tried to copy my notes ... with SPB Backup again (WM5 backup). It loads the SMS, Notes, ... but besides it crashes the contacts.
So reseted again and synced the contacts and left SPB out of scope completely.
Thanks again
Now I am trying to understand Touch flow
Ah, btw the WIFI and Internet works also.
Boris

HTC sprint ROM update 09-25-2009, straight from HTC

HTC released a new stock rom for the sprint touch pro on 09-25-2009.
TouchFlo 3D updated to improve speed and stability
Dialer application enhanced to improve the handling of incoming calls
Resolves an issue using the “r” and “w” keys on the virtual keypad
Improves contact searching performance
Includes a variety of minor bug fixes
http://www.htc.com/us/SupportDownloadList.aspx?p_id=195&act=sd&cat=2
Does this ROM disable ability to Tether?
I read over on PPCGeeks that this ROM disables the ability to tether, has anyone tried?
It does disable the tethering hack. It prevents the ForceCellConnection key from being changed from "Phone as Modem" to "Sprint". When you change it, it immediately reverts back to "Phone as modem" in the registry. I suppose either a process is checking it constantly, or there's a process by which reg edits can be automatically reversed, or it is read only, or ...
Here's hoping some smart person will figure it out. The touch improvements in this ROM are huge (finger scrolling); they make the device ten times easier to use.
I am happy they fixed a few bugs, but this also means Touch Pro is not getting a Windows Mobile 6.5 upgrade. Too bad.
the mini-usb connector on my phone broke, so I can't get an activesync or usb connection. It charges, but that's it. Is there anyway I can do the rom update through a memory card?
thanks
from my understanding, rom update can do only sync with PC. So, you cannot do it.
Please tell me if I'm wrong
loaded ROM from mSD:
open HTC download with WinZip. Extracted NBH file to memory card
renamed NBH to RAPHIMG.nbh
inserted card
Hold Volume Down, Power, and then Rest
loads just fine. Also installed a Nascar and NFL app, in addition to changes as above.
that kinda sucks about the whole tethering thing, i shoulda looked on here before updating! but bluetooth may work for updating?? don't quote me though.
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
I downloaded the latest Rom Update for the Sprint Touch Pro and am having issues. First issue I found, with this update I seem to have lost the ability to select multiple emails for deletion. Secondly, when replying to text messages, windows used to mark the prior incoming message as read, now it leaves it unread. I have to navigate through each msg using the touchflo in order to mark them read. Any assistance regarding these matters would be appreciated. Thank you.
Click to expand...
Click to collapse
HTC Response:
I would be more than happy to assist you with this information. To select multiple emails on you device, go to your email inbox and tap Menu> Select Messages. You will have three options: All, All Below, and Several. All will select all you your messages. With All Below, you will select a message and all items below it will be selected. You can use several to pick and choose messages. As for the text messages, this feature was added with the update to ensure that you do not miss any of your messages. You phone is operating as intended.
If you have any other questions, feel free to contact us again. You can find additional support at our user forum www.htcwiki.com. There is also a customer satisfaction survey for you to take if you are interested.
Sam
HTC Tech Support
http://www.htc.com
Click to expand...
Click to collapse
Okay, thanks, I thought it was me
fio316a said:
I don't know if anyone has a hack for these but there are two problems I found and have emailed HTC only to get the following response.
My Issues:
HTC Response:
Click to expand...
Click to collapse
THANK YOU SO MUCH.
Sorry for the yelling. I saw this when I tried to select multiple messages and I thought I had put a registry hack or something in the previous ROM. They MADE it LESS useful?
What were they thinking? This is not user-friendly.
Ugh.
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
So someone has posted a fix for the txt msg issue on ppcgeek.com...
http://forum.ppcgeeks.com/showthread.php?t=87404&page=2
Look for the program called "LOSER's SMS fix.cab" in post #12.
i dont believe that.. i think they realized the mistake after the fact and making a stupid cover up story.. thats what made me go back to stock rom.. i dont have time to go in and out 49 times for A DAM TEXT. screw that... htc/microsoft FIX THIS PLEASE lol
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
really i never had that problem
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
sherm420 said:
i just received a tp from insurance today. how can i tell if my tp is running this rom?
it does appear to be running the latest sprint radio.
Click to expand...
Click to collapse
If it is running the latest radio, it is also running this ROM. Stock ROM and stock radio are installed as a single upgrade.
mdmanning70 said:
Has anyone else had problems syncing with Outlook? Since I installed the new ROM I cannot get Active Sync to connect with my computer.
It connects as a PocketPC USB Sync but will not connect to Windows Mobile Device Center. The phone also charges. I unchecked the "Advanced Network Capabilities" box and still no luck.
Any ideas?
Click to expand...
Click to collapse
Had the same problem.
After update, WMDC just shows red X.
Tried uninstalling WMDC, no joy.
Any suggestions?
I just received a new Touch Pro as a replacement, and it is running this new ROM update. The only problem im having is that Opera does not show up on the task manager at all. So when i close(minimize) it i have to reopen from the start menu or touchflo and then when it opens my tabs are still open. Anyone else having this problem? Anyone have a fix or idea?

[Q] Phone goes into PROTECTED MODE : How to unlock it???

In Sony xperia m4 aqua after a reboot the mobile strangely gone into "PROTECTED" screen and I tried to Authenticate using the gmail account which i gave when i am configuring the mobile for the first time. But the authentication says "invalid mailis/password", the gmail account login credentials are correct only. With no hope i found no solution to this problem even after resetting my phone. I hope the problem is caused by Android device manager or my xperia service. Kindly suggest me some solutions..
ps: i have attached a screenshot.
OMG! I got the same hereeeee! I've asking all around this but it seem no body cant fix it
I did factory reset, but it still there, I delete device on MyXperia on website, but nothing change
Someone please help!
Well, actually I accidentally wiped my device from my PC via the myxperia site and got into the same screen. Firstly I scared a little when I chose Authenticate I also got "wrong username/password" but after I connected to my wifi with Wi-Fi settings and chose Auth. again, I was able to give my google account creditentals and my phone rebooted ang started fine again.
Sony introduces my Xperia Theft Protection (MXTP) feature on Xperia M4 Aqua, C4 and Z4 Tablet that's why this happened.
Official Source - http://talk.sonymobile.com/t5/FAQ/My-Xperia-Theft-Protection/td-p/998346
What triggers Lockdown stage?
Firmware repair using PC Companion or any other FlashTools.
Doing a full factory/master reset.
Deleting the Google account used for enabling MXTP on the device.
Disabling MXTP in the settings menu and providing false details of Google account.
Removing the administrator rights of MXTP or deleting it.
Triggering Lockdown using MyXperia in a web browser (with the correct login credentials).
How to exit Lockdown stage?
Sign in with the Google account which was used at the time of enabling the MXTP.
ImAnurag said:
How to exit Lockdown stage?
Sign in with the Google account which was used at the time of enabling the MXTP.
Click to expand...
Click to collapse
I try to log in a thousand time but it said "incorrect username or/and password"
I'm 100% sure that i type exactly my Google Account
raymond016 said:
I try to log in a thousand time but it said "incorrect username or/and password"
I'm 100% sure that i type exactly my Google Account
Click to expand...
Click to collapse
As the guy said above, did you try connecting to Wi-Fi ? As the failed username/password issue got resolved when he connected to Wi-Fi
Exit lockdown using a Wi-Fi connection.
Most common scenarios:
• You have performed a master reset of your device
• You have performed a software repair using PCC or B4M
• You have erased your data using My Xperia in a web browser
To unlock:
Tap Wi-Fi settings in the lockdown screen > Connect to a Wi-Fi network and tap the back button > Tap Authenticate in the lockdown screen.
The following authentication is exactly as it is using a mobile data connection.
Good to know: If you tap Authenticate without connecting to Wi-Fi network you see a prompt informing you that you need to have a connection.
ImAnurag said:
As the guy said above, did you try connecting to Wi-Fi ? As the failed username/password issue got resolved when he connected to Wi-Fi
Exit lockdown using a Wi-Fi connection.
Most common scenarios:
• You have performed a master reset of your device
• You have performed a software repair using PCC or B4M
• You have erased your data using My Xperia in a web browser
To unlock:
Tap Wi-Fi settings in the lockdown screen > Connect to a Wi-Fi network and tap the back button > Tap Authenticate in the lockdown screen.
The following authentication is exactly as it is using a mobile data connection.
Good to know: If you tap Authenticate without connecting to Wi-Fi network you see a prompt informing you that you need to have a connection.
Click to expand...
Click to collapse
I did connect to wifi as you can see in my screenshot, i try 3 different wifi already!
raymond016 said:
I did connect to wifi as you can see in my screenshot, i try 3 different wifi already!
Click to expand...
Click to collapse
leave a comment here - http://talk.sonymobile.com/t5/FAQ/My-Xperia-Theft-Protection/td-p/998346
Official support can help you out
Same here. Even tried 1000 times to authenticate. I can take my phone ring from MyXperia site but can not do authentication. I have to send my device to Sony warranty center. What a day!
Google two-factor authentication
To the people not able to authenticate with their google account. Is it possible you have set up your google account with two-step verification and the Sony lockdown mechanism isn't compatible with this? Have you tried turning the two-step verification off?
Disabled 2-step verification already but still stuck with that kind of suck. Damn it.
I even dont use 2-step verification
Posted on talk.sonymobile.com yesterday but when checking today, the topic was gone... Wonder there is some critical issues with MXTP that Sony want to hide.
Got a replacement
Hey Guys, after a long fight I got a new sony xperia m4 aqua as a replacement for the old one. I will disable the mxtp this time and hope that it will not occur again...
brantan said:
Hey Guys, after a long fight I got a new sony xperia m4 aqua as a replacement for the old one. I will disable the mxtp this time and hope that it will not occur again...
Click to expand...
Click to collapse
Nice. Where did you get a new one? From the retailer or from the official sony service (partner)?
same here
brantan said:
In Sony xperia m4 aqua after a reboot the mobile strangely gone into "PROTECTED" screen and I tried to Authenticate using the gmail account which i gave when i am configuring the mobile for the first time. But the authentication says "invalid mailis/password", the gmail account login credentials are correct only. With no hope i found no solution to this problem even after resetting my phone. I hope the problem is caused by Android device manager or my xperia service. Kindly suggest me some solutions..
ps: i have attached a screenshot.
Click to expand...
Click to collapse
contact me at this number 9867031241
---------- Post added at 06:34 AM ---------- Previous post was at 06:30 AM ----------
i have same problem.
if you got the solution then help me.
there is no solution to this problem. my xperia theft protection software is causing the issue from the server itself no matter how many time u try using the correct username or password it will always reply the same incorrect username or password. sony is preparing an update to fix this issue from phone as well as from their server. so guys have to wait for it for a week as said by the service provider or get your handset replaced by the service center.
Did anyone get a fix for this, what did the service centre say when you approach them. Went to lock-down mode day before yesterday , guest mode was working till yesterday now that too is not accessible.
I have the same issue since yesterday.... M4 aqua dual-sim. Just called Sony support. Conclusion: I have to send it back to Sony repair. Bummer.
I just can't believe they made such important software that's sort of bricking your device.
Update: I got it working again! WARNING: this trick will hard reset your device, and might - might not work for you!
Steps to take:
- install Sony PC Companion
- goto Support Zone
- open Update...
- in the popup, click on the link with repair.... (sorry, I have a link in Dutch so I don't know the english text)
! you may need to attach the phone to the computer
- select you device (in my case an Xperia M4 Aqua Dual)
- now follow the instructions given by the software
....but then
I got the MXTP back, but all text was Chinese... OH NO!
Luckally I knew the top button was the Repair button. So, after setting up a Wifi connection, I could enter the Google username/pwd and this time the software recognized my Google account and the device unlocked itself. Hoera!
- then followed the device setup....
I hope this will work for you to. The only other option is to send it to Sont repair.

Categories

Resources