Hey,
I am trying to flash my Captivates firmware using Odin3 and I have it connected to usb on download screen with the right .pit file and firmware, but when I start the process the log reads:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> zImage
Then it is just stuck on this zImage forever. I'm not sure if this process just takes a while or if maybe I did something wrong. I'm a real newb when it comes to all this android stuff but I'm trying to learn. Also I'm not sure if the Re-Partition option is supposed to be checked. Any help would be greatly appreciated.
Thanks in advance!
Related
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating :victory:
Download 1.85 or 3.04 I think 1.83 incompatible with sgs2 and see in task manager is Kies on if yes then kill it...
Regards,
Paulius
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
yooogh said:
hi guys .......... good morning from saudi arabia
my question is my device(Samsung Galaxy S II I9100) does not get access to download jelly bean because (odin v1.83) stoped while downloading, the main problem is i follow the instruction literally and . after that,its say (firmware upgrade encountered an issue please select recovery mode in kies and try again )
then i tried to download it again and that what is happened :-
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> data.img
<ID:0/003> factoryfs.img
<ID:0/003> hidden.img
is sopped in (<ID:0/003> hidden.img) every single time
now guys help me please your man in trouble.
this is my first participating
Click to expand...
Click to collapse
Download the latest Odin from here
Make sure you've installed the right firmware with the right kernil for your device. Re-install the firmware after making sure it is the right one. Search the forum's threads to check some how-to guides of how to flash ROMs and/or Kernels.
Let me know what happens with you!
Don't duplicate threads...
Happy new year
Paulius
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
speedman2202 said:
hello guys
i was try repartition my samsung galaxy s3 i9300
i set odin on PIT and then still running more than 5 hours and show this status
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
and program still running .... is Odin partitioning my EMMC but slow or stopped???
should i interrupt process or not???
thx
Click to expand...
Click to collapse
same as my situation ,but i'm on note 2. it should be that long. if yours are not rooted and it just happened like this then probably it may be a ic or motherboard issue.
I downloaded the stock firmware from this thread: http://forum.xda-developers.com/showthread.php?t=2357200
I checked the md5 and it matched up perfectly, so no corrupt download.
I am in Download Mode on my Galaxy S4 SCH-i545 and I have Odin3 v3.07. I placed the extracted .zip file (which is a .tar.md5 file) into the PDA slot in Odin, placed a checkmark in it and clicked start.
I get the following message:
Code:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am currently stuck on the yellow exclamation screen on my device and desperately need help as I want to return the device. I have searched the forums and on google but what I have found hasn't helped me.
Thanks for any help!
I really need help and am sorry for replying to myself; however, I have tried everything I have found and nothing has worked. I can only get into download mode and to the yellow exclamation. Odin is failing and nothing shows up in Kies Emergency Recovery.
Don't worry, we can figure this out. Read through the entire thread you posted, the last post in that thread states that the guy was stuck on the yellow exclamation as well, but was relieved for some reason or another. You may find your answer there, and if not, private message that person to ask how they got around it.
What build do you have? MDK or ME7? The link you have is for ME7. If you need MDK, here are two different stock versions.
Why are you flashing this is the big question? Is the screen broken or something?
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Are you entering download from a completely powered off state?
Sent from my SM-N900P using Tapatalk 2
penywyse said:
I have a SM-N900P ON ANDROID 4.4.4. Rooted the device with CF Auto Root. Baseband/software version is now n900pvpudnk4. I found a 4.4 version of cwm and twrp. Upgraded my odin from 3.0.7 to 3.0.9. For some reason I cannot get the device to flash either of these recoveries. Odin gives these messages:
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> RQT_CLOSE !!
<ID:0/003> RES OK !!
The device then reboots and gives me message:
<ID:0/003> Removed!!
But when I reboot into recovery it just goes into download mode again. Any suggestions?
Hardware version n900p.12
Kernel 3.4.0-2593013 [email protected] #1
Click to expand...
Click to collapse
Upgrading odin from 3.07 to 3.09 won't make any difference. You are doing something else wrong. Since you did not list which box you used i.e. should be the PDA box, please click on "rom flashing basics in my signature " all the info you need is there including the links you need. Enjoy !!!
To ensure your doing all the steps right go on YouTube and search for Sprint Galaxy Note 3 Odin and follow the video step by step.