Right, i dropped my Htc Hd2 yesterday at work and you guessed right....it broke!! .
The screen glass is fully smashed and so is the screen. I thankfully * Phew* have insurance! HOWEVER if they check my phone that i have chucky rom etc on my phone and i have flashed it then i may be buggered!!!
How do i change it back to original windows htc !
Please help.
HTC Broke
Hai if still your Boot loader is working you can install HTC Stock ROM as it is from the Factory. Read the Forum before asking Questions.Hope will help
pic or it never happened
How do i do this please sivarajkumar?
Read mskip's helpful guide...just after point 2 near the top of the page.
http://forum.xda-developers.com/showthread.php?t=609477
And good luck.
Cant as my screen has cracked then i actually cant see anything on my screen at all.
Charge your phone all the night long.
Download YOUR stock original HTC Rom.
Right click on the .exe and extract it.
Take the RUU_SIgned.nbh and rename it in LEOIMG.nbh and copy it on root of your sd-card.
put the card in your phone.
Power up LEO while your press volume down.
Now,since you have a broken screen, wait some seconds ( 10-20) and press power button.
Leave the phone till the Rom is flashed,you will be sure to have succesfully flashed the rom if after 1 or 2 minutse your phone will reboot (you will hear the vibration going on)
Related
Touch Pro Bricked
Ok so I am a noob and at least I admit it!!! I had been having problems with the display scrambling on my flashed to cricket sprint touch pro so what I did was install Hardspl 37 and tried to do a new flash. I last saw my display say that a problem occurred while flashing to the new rom and now I get nothing when I power up. I have tried hard reset I have tried soft reset I have tried about a million different key combos and I get nothing just the backlight pops on and nothing beyond this point. I get nothing when it powers up ...no startup sounds nothing...Just the backlight pops on and then nothing PLEASE HELP!!!!!!!!!!!!!
IS THIS PHONE A 300.00 paper weight???
Ok so Heres what I have done.... I started the flash from my pc but it didn't take so then I put hard spl 37 on my sd card along with raphimg.nbh and since then I get nothing like I stated above??? also bootloader wont come up the phone powers up but doesnt vibrate like it used to and I get just the backlight??? Some one on another site said to try to manually get into bootloader but I don't know how any suggestions would be greatly appreciated.
Should try pressing volume down button while reseting till you get to bootloader. If not, then...
Oh, and hardspl you want to use is ver 1.90 by Oli Nex. Not sure which one you used.
see bellow
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
Another thing that might have caused this is flashing gsm rom on cdma device (which is your case I suppose - Fuze). Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
To get into boot loader hold down the vol down key while turning on the phone.
Best way for you to try is to take out the battery, put it back in, hold down the 'volume down' button on the side and press the power button.
Sorry that's all i can help you with. Hopefully someone else has had this happen and knows a way out of it
lindenny50 said:
Touch Pro Bricked
Ok so I am a noob and at least I admit it!!! I had been having problems with the display scrambling on my flashed to cricket sprint touch pro so what I did was install Hardspl 37 and tried to do a new flash. I last saw my display say that a problem occurred while flashing to the new rom and now I get nothing when I power up. I have tried hard reset I have tried soft reset I have tried about a million different key combos and I get nothing just the backlight pops on and nothing beyond this point. I get nothing when it powers up ...no startup sounds nothing...Just the backlight pops on and then nothing PLEASE HELP!!!!!!!!!!!!!
IS THIS PHONE A 300.00 paper weight???
Ok so Heres what I have done.... I started the flash from my pc but it didn't take so then I put hard spl 37 on my sd card along with raphimg.nbh and since then I get nothing like I stated above??? also bootloader wont come up the phone powers up but doesnt vibrate like it used to and I get just the backlight??? Some one on another site said to try to manually get into bootloader but I don't know how any suggestions would be greatly appreciated.
Click to expand...
Click to collapse
Step 1. Take a deep breath
Step 2. Search and read... sounds frustrating buts lots of devices have been brought back from the dead.
Step 3. Get the phone to bootloader mode (three horizontal color bars)
Step 4. Read some more or read other posts on what to do because I can't help past this!
I think you may have used the wrong SPL so start looking there.
I saw what Bauerpavel just posted... good stuff
If you can get to bootloader mode you should be able to start all over again from here
http://forum.xda-developers.com/showthread.php?t=448008
If you're running a Sprint Touch Pro, most of the roms here are not for your phone. May want to try ppcgeeks.com
bauerpavel said:
Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
Click to expand...
Click to collapse
Just to be clear, not to be confused with the AT&T HTC Fuze, which is a GSM device!
But you're with Sprint, so assuming you're in the US, you have a CDMA device. Check the CDMA forum at the top level of the Raphael forums. There will be lot's of good advice there on the specifics for that hardware.
Good luck!
bauerpavel said:
Oh, and hardspl you want to use is ver 1.90 by Oli Nex. Not sure which one you used.
see bellow
http://wiki.xda-developers.com/index.php?pagename=Raphael_HardSPL
Another thing that might have caused this is flashing gsm rom on cdma device (which is your case I suppose - Fuze). Make sure that rom you are flashing is for your device (either raphael (gsm) or fuze(cdma) ).
Click to expand...
Click to collapse
Fuze=AT&T=GSM
Sprint TouchPro = CDMA
If you tried flashing a GSM ROM to a CDMA phone you may be up the creek!
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
have you tried installing a new SPL via storage card (rename spl file to RAPHIMG.NBH and place it on the storage card) and enter bootloader mode by holding the vol down button when powering on the device?
the problem is
i cant start bootloader
nothing is working
I think you got yourself a brick...
Does it at least vibrate?
Run SPLExploit!
Dude, i have the same problem with you too but its not my TouchPro but its my old school Dopod D810. I flashed custom rom (my home cook) but forgot to add sumthin and finally i learned somethin that i can ****up my phones LOL. Just like what i thought my phone wont start and it refuse to enter on Windows OS but atleast bootloader mode still accessible. Thanks God
I search for post how to recover bricked phone (ofcourse on trinity room) and found some tools call "SPLEXPLOIT" it runs on DOS Mode. This program can erase your nand memory which in this case you flashed the wrong SPL and will rebuilt some bad Nand memory too. Good tho
I finally can bring my dead dopod came to life (for almost 1 year i left it on garage) lol. Just asked cmonex! maybe he can help you...
If this tools works universal i'm sure it will worked on TP too! Just asked cmonex for more details...
Run SPLExploit (as Administrator) --> while Enter in Bootloade mode -->
Just make sure that USB Cable was recognized as "USB" on the bottom of the screen not "Serial"!
When its done ....
NOTE: "Dont Soft Reset the phone even when SPLExploit ask you to SR the devices" just go ahead straight away flashing new custom rom or anything you want
Goodluck!
The OP can't get into bootloader, because the bootloader is corrupted/dead. So that isn't going to work.
JTAG is the only way to fix it, and as far as I know, no one knows how to do it on a Raphael.
Maybe playing with BIOS ( if BIOS can be accessed ) might help.
But BIOS can really make ur brick a worse brick if done wrongly please ask for help from the senior most members on Raphael forums.
And request them don't order them.
And if nothing works * I love to say this line *
You Just got Yourself a New Shiny Fine Edged Black Clear 600 U.S. Dollars worth Of a BRICK ! Enjoy !
atjee said:
the problem is
i cant start bootloader
nothing is working
Click to expand...
Click to collapse
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
iugalde said:
Do you tried to start bootloader manually?
You can do that, press and hold Vol down, then reset button (with stylus), release reset (keep vol down pressed) and when the multicolor screen appears then release vol down key
I hope this can help you?
Click to expand...
Click to collapse
That is the only way to go to bootloader but as Farmer Ted mentioned his phone ( including bootloader is dead ! )
So i don't think there is any way out for you except if any really senior members can help you with bios or pump in something which starts your bootloader !
atjee said:
Hello ,
my HTC Touch pro was bricked few months ago
i installed WRONG hard spl
on pc it showed 100% Completed
but i couldnt start my phone
how can i fix this ?
if i use Hard Reset method, i doesnt work , i cant start my phone
Click to expand...
Click to collapse
Dude, you might try to PM cmonex. I hear she can do miracles. You can check out this thread and see a miracle there. Who knows? See what can be done. This link will take you to her contact page: http://forum.xda-developers.com/member.php?u=322932. Best of luck to you my friend. Worst case scenario, sell it for parts. Several people around here are always looking to replace "stuff", including me .
the same problem
I did the same thing to my HTC Fuze aka rafael or touch pro, from some reason it was the same thing as diamond and i flashed wrong spl and completely bricked it, no bootloader no nothing. So i went to a service and they said it was a hardware problem so they had to send it somewhere else to be fixed. It took them 3 weeks to get the phone back, in not working condition saying that motherboard was dead. I guess thats what happens when you flash wrong stuff... Now i dont know what to do either. I would like to sell mine for parts if someone is interested or if someone know how to use jtag i would pay him to try to fix it...
First of all sorry for my english not good.
Start : with my HD2 have brick after task29 and not success to flash new ROM I'm take USB. cable out and try to open my HD2 in to boot loader by put volum down + power bottom but screen not show any image or 3 color my phone it only long vibration pull battery out waiting 30 minute and put battery in and try to open my phone to boot loader but is same only long vibration.
Now : can not do any think with it when try to plug power in my phone is auto startup and long vibration.
I'm search on google and in this forum not have some one face problem same as me please help me to fix this.
Any body please help me, I'm love it because now we can run both WM. and Android
Upppp waiting for your help
Did you try a long press of the reset-button?
You could try to put the original Stock Image from HTC onto the root-folder of your SD-Card, rename it to LEOIMG.nbh and Push Vol up + Vol down during start and follow the on-screen instructions if it works.
Otherwise use Search-Function in the forum.
ı have jtag HTC for samsung and HTC devices if u want send for repair to me..
www.sevgigsm.net/forum
admin..
I use ORT
Did you check to make sure your radio version was correct before flashing? This is probably the number one reason for bricking.
Check this thread it may help you if you did the flash properly:
http://forum.xda-developers.com/showthread.php?t=668347
i got same problem now...
no screen, no boot, vol down+ power oso same
no screen just a long vibration
anybody help?
I am using the correct radio so don't tell me I am using a wrong radio or something, I have been flashing for 4 months so I know EXACTLY how to flash.
now i can neither get into tri-color or hard reset so don't tell me to flash or smth like that, just tell me how to recover properly
Don't tell us to use search or something because seems like only 2 of us is encountering this problem in the internet
I'm exactly the same problem as TS coz it juz auto go vibrate when plug in battery
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
at the long vibrate, when i plug in to my pc, it will keep on got usb connected and disconnected sound
and dont know what device is connected as not shown in found new hardware and device manager
I also have been searching all possible keywords about what me and TS encountered but all linked to completely UNRELATED results(like search for long vibrations only link to people asking how to make vibration long and 1st result is this thread)
bountygiver said:
This problem actually started when I flash ROM halfway, it stucked and failed...
the device is already HSPL-ed!!!!
but why the F it cannot get into tri-color bootscreen now?
Also, I have to state that my device already got several problems before, my device was very hard to bootup as it will always stuck at HTC screen w/o red version number at bottom left corner, must keep on removing and reinstall battery and reboot until it can boot, not an issue with rom/radio/sim/sd as I tried flash proper rom and radio and remove sd and SIM.
my device also seems like got problem at the gps chip, because when using it for a few minutes, it will lost signal and never reconnects unless i soft reset, after use gps the device will also use battery VERY FAST(-100mA in standby, from -4mA).
now i cannot flash to stock completely, how do I get warranty it?
Click to expand...
Click to collapse
Silly question, but are you holding (and keep on holding) the Volume-Down button while you press the power button?
of course YES
i told you i have been flashing for so long
Leo from T-Mobile. Hi! I've got same problem. After flashing new (next) rom phone definetely died. Phohe is currently simfree and with HSPL. Only one reaction is short vibration after press power button. I searched everywhere. My phone has no bootloader but system see him as Qualcom CDMA Technologies MSM. Thats all, any ideas? Please and thanks for advice.
czaruch said:
Thats all, any ideas?
Click to expand...
Click to collapse
Yes, you flashed a non tmous stock rom that included a ..51.. radio and it destroyed your phone.
What rom? exact filename please.
thank you so much.
I bricked a Leo with the .51 radio. I think I read that is a European or otherwise foreign radio. Since your ROM has Euro in the name.......
czaruch said:
ROM_Leo_HTC_WWE_EastEurope_1-66.
Click to expand...
Click to collapse
The full filename for that rom is
RUU_Leo_HTC_WWE_EastEurope_1.66.479.2_Radio_CRC_Si gned_15.32.50.07U_2.07.51.22_2_Ship.exe
it comes with a version x.xx.51.x radio, and they do Not work on tmous (t mobile us) phones. They kill them
Your phone is dead, sorry. No known fix.
warranty or repair (or JTAG if you are brave and have the money)
a friend of mine bricked his phone. he then tried to microwave it, but that didn't work after that he took a power wire from an old computer, cut it and connected it directly to the phone's parts where the battery would go...this completely f-ed his phone up (he also used a lighter to fake a powersurge of the battery). Then he called htc and a few weeks later he got a new hd2!
GOOD LUCK
lol, he doesnt need to do any of that, its allready as dead as it can be. Loads of epople have had them replaced under warranty with this kind of brick. It wont start, so htc/tmo cant see that its been hacked.
Hi! I understand and realy sad. Somebody know where could I fix it in UK? And how much for this pleasure. Thanks.
i would contact htc, see what they have to say. (dont say you flashed it, it just stopped working")
Hello guys i have a problem with my HTC HD2.
I have searched a lot on this site before posting my problem.
This is what happens and what i did:
The phone doesn't pass the white HTC screen with the RGD letters below.
What i have tried:
HSPL 2.08.HSPL, 1.66, 1.42, 2.08.000
Radio: Leo_RADIO_2.08.50.05, Leo_RADIO_2.15.50.14
Roms: Stock Vodafone (Dutch) rom, Energy rom
Hard reset (vol up +down on startup).
Tried task 29 and started everything all over again
I went to the a phone store, they couldnt help me. Afterwards i went to the official store but i don't have my receipt anymore so i don't have a warranty..
So i think i have tried everything i could find on this forum. Tried most of the HSPL versions with diferent roms. But all of them stay on the startup screen (white htc start screen)
If someone can help me please, this is really my last chance
Thanks,
Issam
ps. i hope this is the good section to post this problem.
Well the phone starts up now (it actually works for a few minutes!). I haven't changed anything, the only thing i did is leave the battery out for like 1 hour. But everytime i start up the phone it freezes and / or turns of after 1 min or something. Sometimes it doesn't even boot up like the usual problem, but then i remove the battery for 10 minutes and it boots normal again.
So i really don't have a clue
i was experimenting all day again with my htc.
What i found out was, the longer i keep my battery out of the phone the longer i can use it.
For example: I had the battery out of the phone for about 2 hours, when I put it back in i could use it for like 10 minutes.
But when i keep the battery out for 10 minutes it freezes within 1 minute.
Maybe this will help me get the solution to this problem.
I would format the sd card just in case, also make sure you have the correct versions of what you need, rom raido ect, because theres two types of HD2s, hope this helps!!
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
IssamRazza said:
Thanks for the reply, i tried formatting the SD card and i succeeded doing it 5 times i think. I think i have the correct version of rom and radio, how do i know?
Click to expand...
Click to collapse
You should remove hspl , and after that install the latest rom available on htc site for your device (download the rom from htc site, with your serial number ) . Official roms have included radio inside of them. If HSPL is removed and you have again problems with your device with an official rom installed, then you have a hardware problem. You could try to boot up without sd card installed, to see if the card is the problem.
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
IssamRazza said:
Thank you,
I will try removing HSPL and install the original ROM from the HTC site. I'll let you guys know.
Click to expand...
Click to collapse
I see that you are on t-mobile network , so you should download your rom from here: http://www.t-mobile.com/wmupgrade/ . Just enter your imei and download the update. Remove HSPL and then install the official rom. Perform a hard reset after that , and see if is all ok . Keep us informed pls.
Hi, yes i have a T-mobile contract, but my phone is Vodafone branden so i'll have to download the Vodafone version I think.
But what i just did is this:
I had HSPL 2.08.HSPL and a Custom ROM on it. So I was planning on maybe sending it back. Thats why I performed a task 29 to delete all the previous (parts of the) Roms. After that i changed my HSPL to 1.66.000, the original spl I had on it.
But now the phone does vibrate when i hold the power butten (with vol down), but there is no picture, so i cant get into the phone or the Red green blue screen. So i think the phone will not boot because I deleted the Rom on the phone and also returned the spl to original.
Is there a solution for this problem? omg this phone just doesn't seem to be working for me (maybe it's me that is not working for the phone).
It is normal since you did a task29. Verify if you did it correctly here http://forum.xda-developers.com/showthread.php?t=644781
Yes i have read that thread thank you, but the question is:
How can i get the phone to connect with my PC, so I can install original ROM. Because the Boatloader screen won't start up, to make connection with my Computer. I press the power button and vol down butten at the same time. Tried it at least 20 times
Thanks you all. But i sent this phone back to HTC. The board was replaced and they sent it back, so it works again! finally my phone back
hi. my htc hero died today.
i never flashed htc before. i downloaded a lot of firmwares from this site, copied it to the sd card but can't flash it.
when i press the home + power on, a message pops out with a phone and a red warning on it.
i need help to put it back in life. tnx in advice
mudz1 said:
hi. my htc hero died today.
i never flashed htc before. i downloaded a lot of firmwares from this site, copied it to the sd card but can't flash it.
when i press the home + power on, a message pops out with a phone and a red warning on it.
i need help to put it back in life. tnx in advice
Click to expand...
Click to collapse
can help J-Tag. It looks like a problem at startup. I may be wrong