Related
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Please anybody can give me a step by step info on how to copy the original rom to SD card, I need to change language from german to english and I want to keep the original german rom just in case. Thx
Does it have to be on sd there are other way of doing it which I will be able to talk you through (I think) if you need a hand
Well I was thinking to flash it to the sd in case the phone goes dead and you're out of activesync so the only way of flahsing it will be through SD. But another way of flashing is more than appriciated so I'll be waiting for ur guide.. do u happen to know why I can't see the options in the bootloader? thanks really
1st ... I have no idea why you cant get into the bootloader. On my xda 2 after a cold reboot i just get the serial and then when in the cradle I get usb, from their I dont know what to do. I would class myself as a newbie as well but I can talk you through what I did.
Which rom is it that you want to flash?
The extended rom or the Os rom?
i'm willing to flash the OS rom and not the extended. My version is 1.03.00 Ger and I want to flash to the "Dangaard (Qtek) 1.60" or RUU16006WWE_T-mobile_NL version which is an english one although I heard some people had their phones dead while doing so. I must find a way to back my rom 1st.. Did u do the update urself??
Yes I did the update using a programme called
HimaUpgradeUt.exe
I was originally after flashing the extended rom only, but due to not fully understanding the instructions at
http://forum.xda-developers.com/viewtopic.php?t=6470&highlight=
I made a mistake and flash the Radio Stack - the OS and the extended rom as well. After this I worked out how to use HimUpgradeUt.exe to flash the extended rom only. I am guessing that if you follow the same procdure for flashing the rom and flash the OS you will get the same results.
However I haven't tried it yet. I am hoping to get the radio rom and the OS rom for O2 xda2 and try it but until them I cant confirm it. I am only guessing that it will work?
So its up to you I have successfully updated the extended rom 4 time but I just dont have the files to do it?
Where did you get you Os file from?
I already tried Multi-Port/USB TTY program , but in the instructions it says"
3. boot the machine into bootloader mode (hold the Power and directional pad , then push reset)
4. Run the rompdate utility, select the comport as "wceusb001" or something like that as the default comport." The problem is that After going into bootloader mode I launched the romupdate utility but in the com-ports I only see com1 and com2 ,there is no wceusb001!!. And where did u see the d2s that I hear about??
I've got the downloads from the forum this one http://forum.xda-developers.com/viewtopic.php?t=6214&sid=0dad85b97d280219dc51962a01a4997b and the other form here http://shop.store.yahoo.com/cellpoint/tmobilemdaii.html
It seems that we are taking cross purposes here.
Using HimaUpgradeUt.exe you can update the roms using .NBF files,
hence the way in which I updated all 3 of my roms in one go.
Radio.nbf
Ms.nbf
Exteneded Rom.nbf (can’t remember the actual name) it looks like you are using a different up loader or have different files to upload. I can only really help with advice on the process that I followed. I can provide you with the files that I had, if you want it will change your 02 format to I-Mate in English.
Does this help?
well I know we have differnet purposes but we should use the same tool I guess if we followed this link. http://forum.xda-developers.com/viewtopic.php?t=6470&highlight= and the tool is Multi-Port/USB TTY program to back up rom or extended rom. Please provide me the info to back up the rom no matter if to SD or HD. Thanks for ur time man.
I think that you can try using ositools I will find the link and then post it, but again I am still not sure how you reinstal it afterwards
whafni77 said:
Hi to all, my problem is that I can't enter the bootloader. in other words I can enter it(power+navigation buttom and reset) but i only see the word Serial and v1.01, and when usb is connected I see USB v1.01 , i can't see d2s or any other information and options. I wanted to flash my rom to SD using Multi-Port/USB TTY . I did a search on this forum but no luck so if anybody can give me a hand I'll appriciate it. Ciaoz Mine is XDAII the german verwsion.
Click to expand...
Click to collapse
I am in the same situation with you, have you solved yet?
Serial / USB V1.01
I had the same problem, and I found the cause to be a USB Hub. I found that when I plugged the cradle directly into my PC I managed to load the update without any further problems.
I hope this helps
you have to disable usb or com port in activesync, before trying to connect with mtty, or terminal program.
see http://wiki.xda-developers.com/wiki/HimalayaBootloader
Hya
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
It doesnt do anything anymore
Now I got a white screen with upper writing "SERIAL"
and down "V1.03" and no backlight at all...
Can somebody help/guide me how to fix my device?
I'm a newbee and need yoru help
Many thanks.
'Serial' just means that its trying to communicate in Serial mode, if you drop it onto the dock/charger (assuming that is connected to your PC) the word 'Serial' should change to 'USB'. If it does then try the downgrade again.
VW_ELM said:
I tried to downgrade my MDAII from the ROM 1.72 to ROM 1.66.
But after downgrading it, it looks like my MDA II is dead now...
Click to expand...
Click to collapse
Don't worry, it's not dead. If the downgrade process completed normally, you just need to do a hard reset (press power button while holding stylus in reset hole). If this doesn't help, the downgrade failed.
The most likely reason is that you connected the cradle to a USB hub. Try connecting it directly to your PC, then perform the flash procedure again.
Another possibility is that you used Windows 95/98/ME. Some users have reported problems. Try the flash procedure from a Windows 2000/XP system again.
Hope this helps!
Daniel
nope it doesn't work, i've got the same problem!
Don't know what to do...
Thanks tadzio: B4 l have same problem Rom failure , and l try to reinstall
again, flash Rom now :lol:
I post a original latest belgian rom on this forum (rom from dangard), try to install this version.
http://forum.xda-developers.com/viewtopic.php?t=8403&postdays=0&postorder=asc&start=75
you need to dowload this file (a shortcut) on your pc, then execute it following the procedure.
Bye
I solved the problem for me:
With HimaUpgradeUt.exe there was no connection. It was a too old version (0.5.0.0).
So I replaced it with Version 0.6.0.0 and it runs !!!
Hello.
I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... And I also thought it was harmless to just try and see if it worked. But I got an error around 92-93% and after that my device won't start. So my radio ROM might be screwed.
I'd like to flash my ROM with the i-mate one (JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship.exe) and then add the ext-rom. But how do I do that when I can just access the bootloader screen? And do you think it will boot again if I'm able to flash it?
Here's some more info about my device:
HERM100
IPL-1.01
SPL-1.04
Thank you very much in advance. Help will be highly appreciated.
No your rom *is* screwed. You can get into bootloader, you can even get to 11% of a dopod etc rom upgrade if you try, but you will not flash a new radio.
You CAN boot the device.
Do a hard reset, but do not press spacebar to reboot after. Instead, do a soft reset. The unit should boot but as you've screwed the radio you will not get a gsm signal and the phone will say unknown sim status.
I know this as I bought one cheap after the owner had done exactly the same as you.
IMEI-check's unlock solution is the only one that works IIRC, and in some cases this re-writes the security area of the phone and repairs similar issues, but in this case I could not get the prog to read.
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Currently you cannot book the m3100 in through the web as it's too new, instead email / call them.
http://service.htceurope.com/
edit - or if you're an orange customer ring 150 and act dumb saying it ' won't work'.... :wink:
Richard
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
pof said:
What happens if you just leave the phone in bootloader mode and then try to flash any ROM (imate, dopod, htc...)? run 2 times the RomUpgradeUt.exe if you get an error on the 1st try.
If you get an error while running the rom upgrade utility you can monitor the USB port while upgrading (you will see the real error from the bootloader then), there's some more info on this wiki page:
http://wiki.xda-developers.com/index.php?pagename=Hermes_BootLoader
good luck
Click to expand...
Click to collapse
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages. As described in my post above, it will get to 11% and stop. The device will be in the same state as before, with the same ext rom, but the splash screen and bootloader will have changed.
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
There is no error from the bootloader - as there is no radio rom present and no security area the upgrade process just hangs.
Richard
fluffcat1 said:
No, if you want to send it back under warranty do not try to run a rom update as there are no orange rom packages.
[...]
i.e: it will be bloomin obvious you tried flashing it and failed. Not what you want if you try for a warranty repair....
Click to expand...
Click to collapse
That's true, do not try to flash any other roms if you want to use the warranty or send the device back...
Thank you very very much for your help guys.
As I'm the administrator of these devices in the company I work for I just grabbed a new SPV and will send this thing back to Orange. It sounded like I'm getting a new one..
Well, I think I've learnt my lession.
Oh, and I have another question. Is there a reg editor I can install on this one so I can remove the app lock? I know I can install java apps, but it's a bit grumpy about apps that needs installation (the developer must be certificated).
Cheers guys.
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
pof said:
Hi,
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
The rom must match your CID. Let us know if it works
Click to expand...
Click to collapse
Errr, did you read the last post? He sent it back......
Richard
I just wanted to let him know there's a possible solution, it just in case he still has the unit
pof said:
I just wanted to let him know there's a possible solution, it just in case he still has the unit
Click to expand...
Click to collapse
Maybe his search is broken as well as his old phone eh?.... :roll:
fluffcat1 said:
You need to return the device to HTC - you'll need to pay approx £35 for reflashing back to the orange rom. This is what I had to do.
Click to expand...
Click to collapse
Sorry to take the thread a bit OT, but just wanted to confirm this again.
So, if I flashed my M3100 with a different ROM, and then had to return the phone to Orange for repair for a different reason, I can send it back to HTC just to have the ROM reflashed, and then send the phone to Orange to get the repairs done?
I've been hesitating on whether to flash the phone with a non-Orange ROM because I didn't want to give up the ability to obtain warranty repair (as there is no ROM upgrade yet). If it's just a matter of £35 and then everything else as normal, maybe it's not so bad...
Thanks!
My SPV M3100 won't start!!!
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
rachelm700 said:
I also did this, so if anyone can find a solution it would be greatly appreciated.
Also tried this and it didn't work for me:
Try to flash a new rom using the SD card method described here:
http://forum.xda-developers.com/viewtopic.php?t=62596
"I have a problem I hope someone here can help me to solve..
I have an Orange SPV M3100 that hangs on the Windows Mobile screen when I try to start it.
I'm able to go into bootloader mode, and i have tried using mtty142.exe with the set 14 0 command. It still won't boot. I've also tried to hard reset it.. still won't boot..
What I did was trying to unluck the SIM-lock with the Universal unlocker (HTC_Uni_Unlock_v1) from buzz. At the time I thought universal meant that it worked on all HTC devices (stupid, I know)... "
Click to expand...
Click to collapse
the above link doesnt work?
zohaer21 said:
the above link doesnt work?
Click to expand...
Click to collapse
IIRC it is this link on the new forum:
http://forum.xda-developers.com/showthread.php?t=277281
spv m3100 don't start
hello guys
I have the same problem about spv m3100. I used "universal unlock tool" to unlock my device and now it don't start,don't boot...I tried the Hermes SD Card flashing methods with qtek001 rom and, a white screen with "loading...." appears for 2 second and then nothing else appened. I think that the method is right but I need to use a different software. what do you think about?
please help me
thankksssss
My SPV M3100 won't start
SD card method is no good as there is no upgrade from Orange until January.
Tried to do a radio upgrade explained here:
http://wiki.xda-developers.com/index.php?pagename=Hermes_ExtractedRadioRoms
But it didn't work just came up with connection error, tried to monitor USB but nothing showed up to find out why, althouth mtty commands always do show up in USB Monitor.
Still have a brick and looking for a solution, hopefully, someday, please someone help me I am loosing my mind.
Hello
How to enter boot mode on HTC 200 ?
My htc hangs on HTC screen.
I'm trying to reflash it.
Thanx
Chris
@chrisro, Please read the wiki:
http://wiki.xda-developers.com/index.php?pagename=Hermes_UpgradeProblems
http://wiki.xda-developers.com/index.php?pagename=Hermes_Resets
Thank you very much.
Greets form Poland !
Chris
i unlock G4 Wizard with this method. and after i flash it with a turkish rom file. it's success and very well working without sim card.
Bu when i insert a sim to wizard, it has locked the ppc. and after i flash it with CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.
and after the ppc is open but stuck on opening screen. i try to master reset it but i can't. and after i remove the battery and detach the sim.
now the ppc can't open. i try to get it to bootloader mode but i can't. when i press master reset & camera button, nothing happens.
i try different button combinations but it can't open.
edit:
i flash it with RUU MUN program
please help
Oh my god...
Flashing Hard SPL to your device does not mean you can flash any ROM you want. You can only flash ROMs that doesn't have IPL and SPL.
Since CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE (Button's ROM) includes IPL and SPL 1.01, you most likely bricked your device.
in this case what can i do?
can i change the flash of the phone? if yes, hoc much does it?
Help Me I Did The Same
I Have The Same Problem If Theres A Solution Please Help Me!!!...
AYALA445 said:
I Have The Same Problem If Theres A Solution Please Help Me!!!...
Click to expand...
Click to collapse
Alas!
If there cud be a solution,but sorry,its a 'BRICK'.There's no solution except to sell it as parts.
If you are in China, there are places that can replace the flash chip for you. Outside China, there seems nobody do this kind of repair...
Hi there,
I try to unlock my xda neo (PM300) (o2 germany). How newbies are - they have to try out ... an now i got my xda busted
It doesn't boot anymore. The last thing i did, i wanted to install iprophet. Now i see the o2-splash where the IPL, SPL und GSM is on the screen.
I can't get access to the device, because no windows, no active sync :/
Anyone who can help me?
First one i want to get an windows mobile at the device. After this i think about it to unlock ... xD (I want to put a TMobile card on it)
Sorry for my bad english... and thanks in advantage
Given that the device will partially boot up (it'll show the O2 screen), you should be able to recover the device. You will loose all of your data, but will save the device.
You will need to see if the device can enter bootloader. Hold down the camera button and soft reset. If a three colour screen appears you should be alright.
Have a look at this: http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
One question: what are the numbers next to IPL and SPL?