Dear all,
Recently in HD2 I had some issues with the network signal and than i had to restart several time to get back the signal.
Than in one moment I got ARM 11 FATAL ERROR Flash_os_line.c line582 and no HD2 is working but cant connect to the network. HD2 is having HDSPL and in the tricolor screen I'm getting this: aaaaaaa HX_BC before the SPL and Cotulla HSPL.
I did google this problem but couldn't find similar problem for HD2, can anyone help?
Thanks in advance,
rilazi said:
Dear all,
Recently in HD2 I had some issues with the network signal and than i had to restart several time to get back the signal.
Than in one moment I got ARM 11 FATAL ERROR Flash_os_line.c line582 and no HD2 is working but cant connect to the network. HD2 is having HDSPL and in the tricolor screen I'm getting this: aaaaaaa HX_BC before the SPL and Cotulla HSPL.
I did google this problem but couldn't find similar problem for HD2, can anyone help?
Thanks in advance,
Click to expand...
Click to collapse
Anyone to help on this :-((((
ARM11 fatal error - Flash_os_wm.c line 582
The same error has appeared on my HD2 this evening!!
Have you or anyone come across a fix?
Thanks,
Sebster84
Same error!!! i had GPS issues with ginger bread so i undone HSPL(official NBH thru Sd) and same GPS error on windows RUU_Leo_hTC_Asia_India_1.48.720.2_Radio_15.28.50.07U_2.05.51.05_2_Signed_LEO_Ship. then it started having boot errors and if i talk more than 5 min the phone gets over heated and rebbots hangs on boot screen once it cooled off starts again! now this error after a 5 min call . phone works and can make the calls and all still............................
AMR 11 FATAL ERROR
FLASH_OS_WM.C LINE 582
line error in PHP i can understand whats this? dying processor? nand?
serched google and froum
Related
Hi everybody
I have a big problem:
when i lost the gsm signal the phone is power off and never recive incoming calls ... until i'll power on again.
Is there some settings in order to search the gsm signal always...?
...cause i can't control the xda every 5 minutes if have signal or not...
I have 4.21 radio and 4.00.11 rom
Thanks all
Denis
have you tried a hard reset? or even re-writtin the bios?
that worked for me
Hi Guys,
I need your help .
I've downloaded the 4.00.16 ROM by mistake, it really didn't tell the ROM number, so now I want to revert to a earlier one and I can't.
I've got the following message: "ERROR: GetDeviceData - An established connection was aborted by the software in your host machine.
error getting devicedata" and then "ERROR 011: EXECUTE REMOTE COMMUNICATION PROGRAM ERROR. Cannot execute the remote communication program. Please make sure that the USB/Serial cable is properly connected."
PLEASE HELP ME, I'M REALLY STUCK NOW AND DON'T KNOW WHAT TO DO...
Sorry ... when can i get the radio 6.24.00 ???
can work for Italy ?
What do you mean with "re-writtin the bios" ... ? the SD card boot ?
Thanks
I'm following Mr Vanx's guide for upgrading my Jasjam from WM5 to WM6, but am having trouble with flashing the new bootloader onto the device. It's a second-hand telstra imate. I just bought it off ebay a couple of weeks ago and need to upgrade it to get it to read sdhc memory cards. I can't get it to connect to optus' (my mobile contract provider) mobile internet either, which I did via GPRS on my old phone. I'm hoping by upgrading the OS I can remove all of Telstra's code so It's not trying to connect to telstra's 3g network when I start the web browser.
When I get to the last step of the Hard-SPL installation, where the "updater will flash the new SPL and then restart your device (this will take generally less than a minute)" , the phone restarts almost immediately after clicking yes when prompted on the phone. The screen quickly goes to the bootloader screen, which says
"herm 100
IPL-SSPL by Des
Herm 100
SPL-1.09.ds"
The PC says that it can't connect to the phone and I should check the cable, which is still connected
The phone stays on the bootloader screen until I hit the soft reset, and WM5 boots like normal.
Has anyone else had this happen?
Yup,
Same problem over here. I had the problem before. But i fixed it! The only question is how did i do that? short term memory.
I'm trying to solve the problem. If its solved i will let you know.
Till then hang on
I've been trying again today. Still getting the same result, though I figured out if I just leave it when it gets to the bootloader screen, the pc I'm installing from eventually comes up with Error 260.
I'm thinking now that the XP firewall may be the issue, but I'm having trouble disabling it because it's managed by "group policies" (it's a work computer). I'm going to try either finding out which port to unblock, or starting the pc in safe mode so I can disable the firewall altogether.
I fixed the problem with the following softwaretool Hypercore. Just intergrate the Hard spl from olipro. After this the error dissapears.
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
i think u're in the wrong forum..
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
That my friend is a communication error... I had it frequently when trying to install the latest HardSPL under Vista... You can go HERE and see a list of error codes....
ERROR [248~260] : UPDATE ERROR
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
jstuart83 said:
im getting a code 260 and the phone resets it self and active sync looses it connection any ideas
Click to expand...
Click to collapse
AT&T Tilt is a Kaiser....NOT a Hermes.
go to the kaiser forum and they will help you out.
Hermes Getting code 260
I am having the exact same issue. My problem is on a hermes (ATT 8525)
i have the "update error" problem as well. i have read almost all the threads and searched so much i almost found jimmy hoffa, but nothing
i have tried everything i could think of. i reseted the device and computer so many times i think it will "ware out" soon . i tried official roms, hard spl, unlockers... you name it i've tried it and still i cant get past any RUU. after the bootloader it should start, but i doesn't
i've even called the t-mobile tech support but the answer was "our ruu works fine for us, we don't know where the problem is...bad luck"
if some one has any (well don't take this literally) advice he is more than welcome. now i'm gonna chill out
thanx in advance from a frustrated vario II user
i've located the problem. it's an activesync error (code 43). searched for fixes, but unsuccessfully. if anyone has resolved the problem or has relevant info, please post it. thanx
after endles repeats i've somehow managed to get past the error. don't know how. i upgraded the rom smoothly, like i never had any problems
Hi guys.
I've a big problem.
During a radio update my tytn crashed, so i can enter only in the bootloader, nothing else.
I have in the bootloader:
Herm100
IPl-1.04
Herm100
SPL-2.10.Olipro
I've tried to flash the originale rom (cingular 8525) but it always stuck at 12% with error 262.
Also activesync doesn't work, when i put the usb cable on pc-pda the icon remain grey, not becoming green...
Any hope to revive my pda?
Thanks in advance for your help!
UPDATE
I've tried to flash schaps 3.54b (microsd method) and now windows mobile works.
the remained problem is the radio, when i boot the device i read:
R: NONE
G: NONE
bad sign?
Yep... Search for another thread here with radio problems i think that happens with 1.54 radio roms
I've never encountered a problem with the radio rom 1.54.xx.xx.
The "No GSM" error is nigh well impossible to fix. No-one I know has a lasting fix. There are 2 causes, I believe, that may be the culprit.
1). The radio rom memory area is corrupted... - Give up now, there is no help, You need a new motherboard.
2). The antenna has a problem. If you replace the antenna attached to the motherboard this may fix the problem. I did this.
Either way you will need to find a cheap Hermes. I picked up a couple on ebay and salvaged the parts I needed for fairly cheap. I bought "broken" or "faulty" Jasjams. Using them for spare parts I fixed my Hermes and a friends Hermes so they both still work, it was worth it to save my precious phone... Just a thought..,
Cheers...
I had the same problem and have never been solved so I gave up and and I bought me another. I still had the old hermes, so if someone knows how to solve this... I'll be really hapy!
diablos872001 said:
Hi guys.
I've a big problem.
During a radio update my tytn crashed, so i can enter only in the bootloader, nothing else.
I have in the bootloader:
Herm100
IPl-1.04
Herm100
SPL-2.10.Olipro
I've tried to flash the originale rom (cingular 8525) but it always stuck at 12% with error 262.
Also activesync doesn't work, when i put the usb cable on pc-pda the icon remain grey, not becoming green...
Any hope to revive my pda?
Thanks in advance for your help!
Click to expand...
Click to collapse
Hope this helps! Click to "Problem 5: Device shows NO GSM when booting"
Hi,
I have MDA Vario II, aka Herm300, aka Tytn ... My problem is that I've got "No GSM". So I got in forum and checked how to try to Fix it threads... So I tried by putting "Hard-SPL" and also I've tried to Upgrade "Radio", but every time when I start upgrade I recieve "Error 262" at 0%, I changed several Radio's but I had always same result. Also I've tried to downgrade to Official Rom of WM5 and it stops at 13% witn "Error 262" . So my Question is:
Is it possible that I have hardware problem not radio problem .
ATM it works fine with Schap's ROM as PDA and "No Gsm" Again ...
On Bootloader I got:
IPL-1.01
SPL-1.40.Olipro
If there is another solution that may help I'm open for advice.
classic brick...
wich one is the 262 error. (why to put the error number? write the entirely error!)
Dunno if it is brick, because I cant update with most of the roms and also I get error with every radio I try to update with ... I've tried with more than 10 radio's from the archive ...
P.S. I think it is Hardware problem + I got brick and because of the hardware problem i cant reinstal rom+radio or rom to repair brick problem ...
So wich one is the error??????
error 206 207 200768 i dont know...i have this issues too and the cprog.exe seems to be incompatible ... my cable hasnt a good contact to the usb plus the rom i had i didnt downgrade to wmoriginal in a few times...
-Mobile MDA Vario II - help my screen is four colours
Hi I have the same phone a T-Mobile MDA Vario II i ran unlock program HTC_Hermes_SIM_CID_Unlock_v3a - i must have run it wrong or something cause my phone has colours on the screen red green blue white with the ipl 1.01and spl 1.40 - it used to ipl 1.4 (ithink) and spl 2.14(i think) before i tried to run the hct_herm.....v3a.
Is my phone trashed or what can i do . when i plug in the usb cable the message at bottom goes from serial to usb but thats it - the active sysnc does not see the phone. help help help any advice welcome ( short of buy a new phone) this is my new phone i only got it a day ago.
tks