Help HTC NIKI 100(dual) show orange then restart
try flash :- RUU_Nike_ORANGE_UK_1.31.61.10_Radio_Nike_1.58.16.27_signed_Ship
Success but same
any solution
harry_01 said:
Help HTC NIKI 100(dual) show orange then restart
try flash :- RUU_Nike_ORANGE_UK_1.31.61.10_Radio_Nike_1.58.16.27_signed_Ship
Success but same
any solution
Click to expand...
Click to collapse
Maybe some dust causing your problems try to clean your device.
Greetz,
Rataplan said:
Maybe some dust causing your problems try to clean your device.
Greetz,
Click to expand...
Click to collapse
full clean but same
bootloader screen show this
NIKI100
SPL-1.16.0000
CPLD-4
harry_01 said:
full clean but same
bootloader screen show this
NIKI100
SPL-1.16.0000
CPLD-4
Click to expand...
Click to collapse
Okay thanks, from what I see in your bootloader is that you don't have Hardspl in your device so it is important that you flash your original rom.
I think that the rom RUU_Nike_ORANGE_UK_1.31.61.10_Radio_Nike_1.58.16.2 7_signed_Ship is your original rom if not try to find your original rom and flash again, if this rom is your original rom then I think you have to went back to the shop and ask if they can solve it.
If the rom above is not your original rom, then you can find a lot of original Niki roms HERE.
Goodluck
Rataplan said:
Okay thanks, from what I see in your bootloader is that you don't have Hardspl in your device so it is important that you flash your original rom.
I think that the rom RUU_Nike_ORANGE_UK_1.31.61.10_Radio_Nike_1.58.16.2 7_signed_Ship is your original rom if not try to find your original rom and flash again, if this rom is your original rom then I think you have to went back to the shop and ask if they can solve it.
If the rom above is not your original rom, then you can find a lot of original Niki roms HERE.
Goodluck
Click to expand...
Click to collapse
brother any option to repair my device to MTTY
brother i am try o flash hardspl-1.16-nike.nbh i got error 262
i try to mtty 1.42
Cmd>
Cmd>boot
InitDisplay: Display_Chip=1
Fill RSVD information for block 288 to 309
Storage start sector=0xAEC0, total sector=0x10400
Storage start block=720, total block=1040
Total Bad Block in CE: 0
Erase physical block from 1010 to 2032
formatstorage Bad block found: 1446
si backup: Erase physical block from 2032 to 2048
No card inserted
OSSIPreLoad ++
Related
Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Before reflashing...
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
0pal said:
U need to downgrade to WM5 OEM with e.g : RUU_Prophet_220734_2207114_024721_NVID
(Look for on this board )
I had the same problem.
+
Click to expand...
Click to collapse
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
naser404 said:
I did that already using the same file "sharebigfile.com_RUU_Prophet_220734_2207114_024721_NVID" & i understand that once i get to the boot screen, i need to flash to WM6 but it just doesnt work.
Any other suggestions ??
Click to expand...
Click to collapse
1.When you get to the boot screen, let WM5 start, tap once and do a hard reset.
2.Load WM6.
I just tried that, still no go. ANy other suggestions ?
naser404 said:
Hi,
I have a G3 Prophet, I did flash it with WM6 before & it worked but now every time i try to flash with [pdaviet] 4.0.0.0.4s_pv or other WM6 roms i get the same freakin error " Could not update itsutils.dll to the current version, maybe its in use?"
I tried restarting my activesync & rebooted the pc (winxp), The funny thing is when i try to flash with the NOID WM5 flash it works great.
I also flashed a G4 Prophet & it worked.
Click to expand...
Click to collapse
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
SeaPea said:
If you followed exactly what others suggested, it should be okay. Read the Sticky notes on top of the forum and follow EXACTLY word by word.
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
and remember to use the correct G3 ROMUpdateUtility.exe file in the first step!
SeaPea said:
If you think you have done so but still failed, there is another way to get around the "itsutils.dll in use" problem -- just copy the 2 .cabs (Cert_SPCS.cab and EnableRapi.cab) in the folder of the new ROM, into the PPC phone any directory and run them. then repeat the 2nd step. It will go away. But that is not a clean method.
Hope it helps. Good luck.
Click to expand...
Click to collapse
Just wanted to thank you SeaPea, it "Finally" worked & i hope i can pay you back.
1 question though, what do you mean by not a clean method ?
Thanx again
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Hang83 said:
hi naser404,
i also got same problem when upgrading wm6
1.Finished step1 (downgrade to wm5nvid)
2.Restart ppc, show welcome screen and .....
3.Windows will inform you to do setting (activesync)<---don't do this part
4.click cancel and windows will use "Guest" to link with ppc
5.run upgrade.bat
hope it can help you
P.S.my english is not good, just try to give you some advise
Click to expand...
Click to collapse
Thanx a lot Hang83, I'll give that also a go & see how things work. I am greatfull to all you guys for the help.
Naser
Hi,
I want to flash a new rom to my HTC TOUCH DUAL.
if i boot in three color modus it says
NIKI200
SPL-1.22.0000
CPLD-4
Click to expand...
Click to collapse
But if i want to flash anything, after a while i get "Connection error".
How do i flash it ?
Thanks in advance
Try to flash HardSPL/USPL to your device first...
vcdwelt said:
Try to flash HardSPL/USPL to your device first...
Click to expand...
Click to collapse
That failed too
Can you send me a link with a tutorial to flash USPL?
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
vcdwelt said:
Take a look to this Thread: http://forum.xda-developers.com/showthread.php?t=355730
There you can find a Tutorial for flashing SPL to your Device.
Click to expand...
Click to collapse
That's not HARDSPL?
Dennus2008 said:
That's not HARDSPL?
Click to expand...
Click to collapse
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
vcdwelt said:
It's about all SPL's (SSPL,USPL,HardSPL) just start reading there
Click to expand...
Click to collapse
So i try to flash the USPL, it hangs on 0%, and 2 minutes later i get "Connection error".
What am i doing wrong?
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
369011 said:
I had exactly the same problem (also my phone was sim unlocked).
Try to use Niki SuperCID
http://forum.xda-developers.com/showthread.php?t=395945
i used that, now i can flash any rom i want.
Click to expand...
Click to collapse
Not working too
I think the problem is in your pc
Tim4 said:
I think the problem is in your pc
Click to expand...
Click to collapse
Could also be a bad usb cable...
rling said:
Could also be a bad usb cable...
Click to expand...
Click to collapse
Oke, i will try a new usb cable
I'll keep you all updated
Dennus2008 said:
Oke, i will try a new usb cable
I'll keep you all updated
Click to expand...
Click to collapse
It´s not working with a new usb cable
Dennus2008 said:
It´s not working with a new usb cable
Click to expand...
Click to collapse
I found something, at the moment my phone boots into the three-color screen, the activesync connection is lost, and won't come back.
Is that normal?
it's normal.
Try this one
1)Download original ROM
2)Disable afirewall/antivirus software
3)Unplug ethernet cable
4)Uninstall activesync
5)Restart PC
6)Boot phone in three-color screen (Bootloader)
7)Try to flash original rom
if you still have no success, there is two possible reasons:
1)Problem in your PC (Just reinstall windows, formating will be good to )
2)Problem in phone's flash memory (Only service center can help you)
how about sd card flashing
How come nobody gave him the option to flash using the memory card, dont know how to name the nbh file (NIKIIMG??) but that could work for it, whoever has the name for the image should also update it to the wiki..
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Who the f*ck claimed that you should install an official update via SD?
Do you don't know, that you will lose your HSPL and there is still no HSPL for 3.03?
Please follow this thread, maybe we can solve your problems...
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
IndigoHD said:
I tried installing 3.14 using SD-Card following someones advice on here and it didnt work.
When i try turning on my phone it shows me "Software update failed, please try again" and when i go to Bootloader it shows "SPL-3.03.0000"
i tried task29, i tried flashing artemis rom, original 1.48.
Nothing works.
I dont know what to do anymore.
Click to expand...
Click to collapse
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
IndigoHD said:
How can i do that?
EDIT: i just shed a tear of joy.
My HD2 has been reborn.
For some beautiful, yet unknown, Reason it let me flash 1.48 not.
Not using SD-card method, but regular usb cable method.
i now have SPL-1.4.2.0000 again and a phone in working condition.
Click to expand...
Click to collapse
Yeah!!!!
Crusoe86 said:
Yeah!!!!
Click to expand...
Click to collapse
Thank you so much Crusoe. So very, very, very much... you and everyone who tried to help me.
It doesnt matter that i ended up getting it to work again differently..... i owe you one.
All of you.
and Crusoe... if you have some time to teach me the things i OBVIOUSLY dont know..... id love to just talk to you.
I guess i have a LOT to learn.
Some kind of isntant messenger? perhaps?
htc hd2 softwared update failed
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
ricotreo700p said:
please help me.. i have a htc hd2 with screen update failed...
[email protected]
please help me..
813-369-3081
Click to expand...
Click to collapse
Tried this and solved same error :
http://forum.xda-developers.com/showthread.php?t=668347
please tell me how did you fixed it?
kurt-willems said:
Flash Stock Rom 1.66 ore 1.47 from SD; (hope you can downgrade your spl version)
when this is done correctly flash Stock Rom 3.14 by using your RUU_Leo_S_HTC_xxx_3.14.xxx.2_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship.exe
then you can start to flash custom Rom by using SSPL.
I don't get it way you did this on this way when in the same time on the Artemis Rom thread there is a full instruction on how to do it.
post #26465
Click to expand...
Click to collapse
wow,
really nice help,
hope i can fix my hd2
thanks cruise for all the nice tips and tricks...
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
ihateu said:
Look i dont know whats the difference between hspl and hspl3 ( and i have hspl3).... i need to know which stock rom to flash back without bricking the phone and, do i have to put regular spl back on the phone so i can get a replacement device. The screen is not responding at all. i cant dl the stock rom from tmobile website because it wants my IMEI# i cant navigate to the menu on my phone cause the screen doesnt work. please some one post a link here to a stock rom that i can flash that will not brick my phone. Im kinda confused cause i read around that if u have hspl3 flashing to a radio 2.10 or 2.13 will brick it thanks !
oh yeah this is what i have running on my phone so far http://forum.xda-developers.com/showthread.php?t=843221
Click to expand...
Click to collapse
imei is printed under battery. maybe this help.
criszz said:
imei is printed under battery. maybe this help.
Click to expand...
Click to collapse
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
ihateu said:
thanks i downloaded this stock rom: T-Mobile_HD2_MR_Software_3.14.531.1 i have 1 question after i flash do i still have to remove hspl3 ?
Click to expand...
Click to collapse
no. stock rom flashed from sdcard will remove hspl3
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
ihateu said:
ok i dont know how to do it from the sd card why cant i just do it from my pc ? and if it requires that i have to click on something or open it on my phone i cant because the screen is not responsive
Click to expand...
Click to collapse
do it from your pc , nothing bad could happent.
hello together,
i have been reading a lot in this forum but i did not find a solution. This is my problem:
My HTC TD2 shows a pixel error, therefor i should sent it back to the provider. Because i have had ERG-ROM with hard-spl on the phone i have tried flashing first sspl. After that i have tried to flash the original HTC-ROM, but at 9% it fails.
After the recovery the device boots to this 9%-Screen and that´s all. If i am booting to the bootloader, the Bootloader-Modus (Tricolour-Screen) appears, but in the upper right corner stands:"ruunbh"
What can i do next?
schHTC said:
hello together,
i have been reading a lot in this forum but i did not find a solution. This is my problem:
My HTC TD2 shows a pixel error, therefor i should sent it back to the provider. Because i have had ERG-ROM with hard-spl on the phone i have tried flashing first sspl. After that i have tried to flash the original HTC-ROM, but at 9% it fails.
After the recovery the device boots to this 9%-Screen and that´s all. If i am booting to the bootloader, the Bootloader-Modus (Tricolour-Screen) appears, but in the upper right corner stands:"ruunbh"
What can i do next?
Click to expand...
Click to collapse
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
actually you should first flash the stock rom and then flash back the stock SPL (that's what i did, at least).
so, my advise would be to install the HARDSPL, then flash the stock rom and finally flash the stock SPL. this worked for me
good luck
cmonex said:
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
Click to expand...
Click to collapse
cmonex, do you think that a phone without any OS/ROM will not be suspicious?
tuniel said:
cmonex, do you think that a phone without any OS/ROM will not be suspicious?
Click to expand...
Click to collapse
afaik, as long as SPL is stock it should be okay... better than if it was booting to a cooked rom.
OP did have the original shipped ROM for the device, it seems. so he can say it got stuck when flashing, which is true.
cmonex said:
well, it has stock SPL now, yes? the custom OS is also erased by now... if not, then do a task 29 to make sure it is erased.
and then you can send the phone back no problem.
PS: I pressed thanks accidentally heh.
Click to expand...
Click to collapse
Can you explain to me please, I have this same problem, I tried the ROM update and it failed also to 9% and is now just the home screen, I need the steps to recover the phone, thanks.
oSanto- said:
Can you explain to me please, I have this same problem, I tried the ROM update and it failed also to 9% and is now just the home screen, I need the steps to recover the phone, thanks.
Click to expand...
Click to collapse
SPL version?
which ROM did you try?