I I was attempting to replace the black x10 shell with the white shell and i torn the ribbon that goes to the three keys on the bottom is there any replacement or anyway to use the phone without those keys???
Related
Hi.. i dropped my phone last night by mistake and it gave me an issue with the screen.The screen is not rendering colours properly it is showing yellow patches on it but when i flex the phone or press the bottom part of the phone it works perfectly fine.i thought there might be something loose so i opened the phone myself and tightened the screws and the lock cables but this did not help me as well.Have i damaged the screen or the digitizer?also when i put in the charging cable and move cable up down the color changed to green or sometimes blue
you probably loosened something inside. more to the point, if you touched the screw with the sticker on the warranty is void.
i dont have warranty mate
Hi, all my xperia x10 was working fine yesterday and after changing the shell an horizontal line appeared on the phone. everything i try and it wont go away. see images.
solidus935 said:
Hi, all my xperia x10 was working fine yesterday and after changing the shell an horizontal line appeared on the phone. everything i try and it wont go away. see images.
Click to expand...
Click to collapse
It's unfortunately gotten damaged.
OmegaRED^ said:
It's unfortunately gotten damaged.
Click to expand...
Click to collapse
I agree. If you unevenly applied force to the screen while removing it, jabbed it, or flexed it to much then its very possible that you damaged it and need to replace it with a new one. What was the reason for changing the shell in the first place? Was it damaged from a drop? That may explain why it was more tempermental during the process, because of previous infliction. Be careful next time!
- X10a 2.1 / JIT ~ via XDA App
Do you have a screen protector on it? I had the same exact line. Pulled off my screen protector and it was gone. Put on a new one and was good to go.
Sent from my X10i using XDA App
The shell was damaged thats the reason for change. Also the side that i lift the screen on was not damaged. so i dont why that happened
Hi guys,
My Vibrant screen recently broken hence I ordered a new screen from ebay. Got the screen today and while removing the old faulty screen, I accidentally tore a thin wire which was connected to the 4 buttons at the bottom. Out of the 4 buttons, 3 of them just came off the screen. So now I have successfully replaced the faulty screen with the new working screen. Everything works except the 4 buttons at the bottom. I press those buttons but nothing happens, not even the backlight comes up.
I believe I have done some serious damage to the buttons. What's my best options now? Should I take it to Samsung Repair Center? Will they even be able to fix this issue?
Its so frustrating because if I open any app I cant go back. I have to restart the phone to be able to use any other app.
Please help,
Dinesh.
Hi.
Recently my LWW (white version) fell on the ground but it won't have any spalls. The only reminders of this are annoying gray marks on the back panel which looks like a dirt. I've tried to clean this up but regular cleaning didn't work. Is there any posibility to remove that marks? Thanks for any help
Tailor93 said:
Hi.
Recently my LWW (white version) fell on the ground but it won't have any spalls. The only reminders of this are annoying gray marks on the back panel which looks like a dirt. I've tried to clean this up but regular cleaning didn't work. Is there any posibility to remove that marks? Thanks for any help
Click to expand...
Click to collapse
Must be something on the inside, happened to a friend with his Defy+, he had a black mark on top-left, and he was unable to clean it. He just took the phone to the provider and they gave him a new one
I'm not sure if I can take the phone to the provider because my warranty is void. But they don't have to check if it's unlocked so maybe i'll try. Otherwise I will just buy a new back panel
Hi there - I am wondering if I can get some help here.
I had an old working HTC Evo 3D and I use it as a spare phone during travel to use prepaid SIM cards. I wanted to change the complete housing of Evo 3d and purchased a front, middle & back frame from online OEM vendors. As a newbie, I was so excited and started to disassemble the phone and to put into the new housing. All went well till I started to take the LCD and digitizer from the old housing. I made a mistake and ripped the flex cable of the digitizer. I felt very bad and then I decided that I need to order a new digitizer online.
I continued to reassemble the phone with the new housing till I receive my new digitizer. I made sure that I kept the sticky tape in the front housing intact so its easy to take it again. I completed the assembling and when I turned on the phone the LCD was displaying white and black dots like grains. However, I could hear the HTC boot sound the “Quietly Brilliant” sound. At this point, I thought I have damaged the LCD too.
Today, I tired to switch again, I dont see the phone booting-up or hear the boot-up sound or see the white and black grain screen. When I charge the phone, I see the red LED light and then after some time it turns green. I tried all type of resets like power+volume buttons, power+camera button, long press power button. However, I dont think anything is happening.
Now, I am worried if the problem is now with the display or I damaged the motherboard. Does anyone know if the phone wont start if there is a damage to the LCD/digitzer? I am just waiting to know what might be the problem before ordering LCD/digitizer. I am unable to check which part is damaged now.
Thanks in advance!