Hi, all my xperia x10 was working fine yesterday and after changing the shell an horizontal line appeared on the phone. everything i try and it wont go away. see images.
solidus935 said:
Hi, all my xperia x10 was working fine yesterday and after changing the shell an horizontal line appeared on the phone. everything i try and it wont go away. see images.
Click to expand...
Click to collapse
It's unfortunately gotten damaged.
OmegaRED^ said:
It's unfortunately gotten damaged.
Click to expand...
Click to collapse
I agree. If you unevenly applied force to the screen while removing it, jabbed it, or flexed it to much then its very possible that you damaged it and need to replace it with a new one. What was the reason for changing the shell in the first place? Was it damaged from a drop? That may explain why it was more tempermental during the process, because of previous infliction. Be careful next time!
- X10a 2.1 / JIT ~ via XDA App
Do you have a screen protector on it? I had the same exact line. Pulled off my screen protector and it was gone. Put on a new one and was good to go.
Sent from my X10i using XDA App
The shell was damaged thats the reason for change. Also the side that i lift the screen on was not damaged. so i dont why that happened
Related
Hello,
I hope someone can help me (and I am in the right subforum).
My Girlfriend dropped the Xperia Pro into water, now the LCD has some nasty blur. The LCD itself works, but there seem to be something in front that blurs it (maybe only water).
Now I want to open it, but I cannot disconnect the upper panel from the back.
I do not know how to open the slider.
Can someone help me?
Thank you
Xperia Mini Pro_SK17_ Disassemble
here you go my friend!!! have fun...
Thank you vincenzo!
But I need a Guide for Xperia pro. It is the MK16a/i.
if your lcd still work,you dont need to replace it.Drying it out should sort this out.I have had this same problem on mini pro and fix it this way.Take the display out and put it on radiator for 3 hours.
I will do it.
But "take the display out" means to disassembly it? But I do not how as there a 4 screws on the backside, but I can only access two.
Maybe it is enough if I put the whole cell on the radiator.
Unfortunely the background light is flickering sometimes...
vincenzo697 said:
here you go my friend!!! have fun...
Click to expand...
Click to collapse
nice! do you know where can i download files like you posted (manual)?
you can take the battery out and put it on radiator,but there is a small battery fited to motherboard for keeping your Clock going if the power source is out,so you maybe destroy it overheating it.I just put the phone on radiator and it still work,so do what you thing.Better way is taking the display out. there you go m8 http://www.sonyericsson-world.com/index.php?/files/category/64-xperia-series/
piotrasss87 said:
you can take the battery out and put it on radiator,but there is a small battery fited to motherboard for keeping your Clock going if the power source is out,so you maybe destroy it overheating it.I just put the phone on radiator and it still work,so do what you thing.Better way is taking the display out. there you go m8 http://www.sonyericsson-world.com/index.php?/files/category/64-xperia-series/
Click to expand...
Click to collapse
Maybe I was destroyed it on my LwW because after taking battery out clock resets and in root directory there is file called mr.log
Sent from my Live with Walkman using WT19i
So I took the lcd completely out of the mobile phone and put it a few hours on the radiator.
Now I see still a few "blurs", but it is much better than before.
wow ..is there any instruction to complete disassamble xperia mini st15i ?
Finswimmer said:
So I took the lcd completely out of the mobile phone and put it a few hours on the radiator.
Now I see still a few "blurs", but it is much better than before.
Click to expand...
Click to collapse
Hi, how did you disassemble your Xperia MK16? I cant find a disassembly manual anywhere.
Link
XtriFe said:
Hi, how did you disassemble your Xperia MK16? I cant find a disassembly manual anywhere.
Click to expand...
Click to collapse
Hey, I just came around this video. It is not in english but the procedure is detailed:
Go to youtube /watch?v=mz8vobWdELU
Hi
after one year of usage sudenlly the whole screen become like yellow/warmy.
i replaced the screen for new one but it's happend.
i returned the original [email protected] but still.......
Do you have any idea?
did22 said:
Hi
after one year of usage sudenlly the whole screen become like yellow/warmy.
i replaced the screen for new one but it's happend.
i returned the original [email protected] but still.......
Do you have any idea?
Click to expand...
Click to collapse
X10MiniPro (U20) I suppose?
Probably the flex that connects the screen to the rest of the phone.
SmG67 said:
X10MiniPro (U20) I suppose?
Probably the flex that connects the screen to the rest of the phone.
Click to expand...
Click to collapse
nop, X10mini i10.
i checked the 'Service menu' and i noticed that only the upper screen is yellow
and whole screen is a little darker (but the brightness is max...)
Hello, I want your help to fix my xperia go touchscreen problem. Well, Ive searched the similar problem on the forum but what I found is about "touchscreen not working" only.. was, it's very easy to text and slide trough the screens without any "not so responsive screen".. after few months my xgo became less sensitive like before, when I tried to type as fast as usual. The screen cant detect my touch.. I compared with my friend's xgo and it is easier to text on his xgo.. its because I flashed wrong rom? I flashed one roms so far (superJB and currently back on stock with phantom 1.0.9 kernel) thanks.
Xgo .100 JB with UBL.
Open your device's build.prop using any text editor and check
ro.sf.lcd_density=??
Compare its value with your friend's xperia go and edit it accordingly. After you've done with editing, restart your device.
Check screenshot in the attachment.
Note: Do not put value similar to that of screenshot. It is just for your reference.
If I helped you then press Thank you.
Sent from my MT27i using xda premium
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Devo1982 said:
My Xperia Go has the exact same problem recently. It just started happening a few days ago and nothing has changed on the device (software etc). I used to be able to text VERY fast but now it sometimes takes a few pushes of the keys for the device to recognise my touch. I can't believe it is anything in the build.prop as this would have suddenly changed right? MY LCD density there is set to 160 (which is the same as default).
Any help appreciated...
EDIT - I also noticed that since my touchscreen has become un-responsive I had got battery drain issues. The last 2 nights I have gone to sleep and when I have woken up my battery is almost dead... hmmm
Click to expand...
Click to collapse
I have same problems with my xperia go .it became unresponsive ..
i didnt drop it just became like that .
I get this issue too since i accidently drop it. But when i try to testing games and the phone getting heat up and now its more sensitive than before. Maybe not as sensitive as back there at GB but its better now. Almost as sensitive as when i try using JB at 1st time i think.
Oh yeah.. i even already try to open it before to check if the connector are losen or something like that with no result. And already prepare to changing my touchscreen but i think its not necesary now. Hope this help
i have the same problem, mine im gonna change the digitizer this month.
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Please report here if your back to normal again after you change your digitizer. Coz mine still choosing something sometime if i swipe through it even the sensitivity is good now.
ah7 said:
Yeah i think it's the digitalizer too... it happened to my friend that drop it or make him goes into swim pool water or sea water .
Well my have that problem too, but after few months without "swimming" it back almost normal or It has now become a habit ...
Click to expand...
Click to collapse
I use mine to record fish on beach at first month but its still good at that time. Mine dropped few times but the last drop make it not sensitive as before, since i used it like what i post before the sensitivity back to normal but sometime (in 1 of 8) not recognize my touch.
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
LENNUJ said:
yeah i will report here, try to dial *#*#7378423#*#* then service tests select touch screen now draw a line to see if there's something wrong on your touch screen, mine i never drop or submerge.
Click to expand...
Click to collapse
seems like mine is problem with digitizer too...(marking on red) Thx BTW
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
LENNUJ said:
Do you use back cover? Mine is nillkin back cover i hope thats not affect the digitizer
Sent from my ST27i using xda premium
Click to expand...
Click to collapse
yeah i use back cover too (i dont know about the brand). i dont think the back cover affect the digitizer coz i already use it at least 2 month after i buy mine but the digitizer is became troubled last month since i drop it.
LENNUJ said:
i have the same problem, mine im gonna change the digitizer this month.
Click to expand...
Click to collapse
Hey , does the touch screen turn to normal after you change the digitizer ?
Please give a feedback on that . Anyone ?
Red stripes shows dead spots on my Xperia U, ill try replacing Digitalizer next week, but if anyone can report it before, it would be helpfully.
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
LENNUJ said:
im still stucked with my defective digitizer i got a problem with my order from china the item never arrive. i will try to buy another digitizer next week.
Click to expand...
Click to collapse
Its china...
SIGNATURE OUTDATED. I now use honami moonwalker 4.2
"AndroidNoob69.... Your favorite NOOB!"
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
LENNUJ said:
UPDATE: I just got my replacement digitizer & i tested it, now my xgo live again but im still waiting the adhesive tape to stick it! :silly:
Click to expand...
Click to collapse
Nice... because i am planning to replace my digitizer by my self too when i got my digitizer spare . Just need to know what the other things i would need to change it perfectly (Make sure my XGO still have water resistant capability). Sooo... i would appreciate if u could reporting back when you done it .
Same problem.. My phone is not sensitive as usual.. When typing and gaming, it is really annoying.. :'(
How much is the digitizer for Xperia U?
I didn't do nothing and the phone just became not sensitive to touch.. Sliding is good but when I press 3 times to screen.. Only 2 times approx is known to touch..
Help me out ? Only way is change digitizer?
Just make sure u didnt get touchscreen issue from lag. I use custom rom and the touchscreen is feel better, but some area still hard to use because mine is defect already. U could try search on google for ur digitizer price .
Sent from my ST27i using xda app-developers app
Hi guys,
I took my Go out for a swim and after my swim, the screen started to flicker and eventually the screen died(yes, all the flaps were closed, I double checked). Now this was last month, and I did the whole rice bag thing, and still no improvement :3 But occasionally the screen comes back to life when I tap on it and then dies again.. And last week, I just happened to switch on the phone and it started working like nothing ever happened! And yesterday it stopped working again I took it to the Sony store and they say that it might take about 400RM(120USD) to fix it.. Is there anything that I can do to fix this??
Try to have it tested for water resistance, if a machine test shows leaks even after cleaning the caps it's not your fault (at least if $ony follows their service manuals to the letter)
You can open the screws up in the back and manually troubleshoot what is up with it. Check it for any water or moisture on the inside or any damage from it. Good luck
Sent from my Xperia Go using Tapatalk
@Hukanawa
Did you switch it off the instant it got wet. Using the internally wet phone could damage the main board which could be causing the problems.
Or the screen could have been screwed up...
Sent from my Xperia P using Tapatalk
Hamza Murad said:
@Hukanawa
Did you switch it off the instant it got wet. Using the internally wet phone could damage the main board which could be causing the problems.
Or the screen could have been screwed up...
Sent from my Xperia P using Tapatalk
Click to expand...
Click to collapse
I did switch it off after the screen started flickering :/.. I opened her up today and theres a a little of rust on one of the connectors that lead from the screen to the board..
Well there you go. Youre gonna have to get new parts or fix the old ones.
Try removing the rust from the connector, then fully drying the insides and see if the screen turns on if you moove the connector around. Also check ebay for the price of a new screen. It might be cheaper then you think.
Sent from my Xperia Go using Tapatalk
After water damage my xperia z3 having the same problem! Screen flickering, brightness is very low I can barely see anything in daylight! Otherwise everything working fine! Any idea what might causing the problem? Is it the screen or the motherboard is damaged?
What should I do? The ghost touch is
Preventing me from using the screen properly
Try to clean it or wash it.
Sent from my C6903 using XDA Free mobile app
I remember that that I got this problem sometimes on xperia z and normally a reboot helped.
Sent from Xperia Z2
Ensure glove touch is disabled.
Even I am having this issue... Seems like Glove mode automatically turns on by itself even though it has been disabled.
So far no solution.
Yea it's like the keyboard swipes it self. Same for the screen. Even factory reset, but it happens again once in awhile.
Hello everyone. I bought via ebay display for Sony Xperia z2 but when I connected it turned out to not work properly. He started his own to run applications, as well as to work on it with 30 fingers. I guess that's called Ghost effect. What can be the problem? In short operating normally, and then go crazy.
I'm not completely reassembled the phone after changing the display because waiting waterproof tape for display.
. Does it have something to do with my problem?
keithljh said:
Yea it's like the keyboard swipes it self. Same for the screen. Even factory reset, but it happens again once in awhile.
Click to expand...
Click to collapse
I took it in to Sony and they repaired it for me. They told me that there was water underneath so they replaced the damaged parts for me. But the ghost touch issues still happens once in a while...
Sent from my D6503 using XDA Free mobile app