Related
Hi,
I have purchased Xperia X10a from AT&T currently running Android 1.6. I went through many posts in this forum but couldnot figure out what is the exact way to get Android 2.1 on this phone. I know AT&T has not rolled out 2.1 updates for this phone. I would appreciate if anybody could help me in finding an exact method to get Android 2.1 on my phone now.
Thanks in advance!!!
pratikjac said:
Hi,
I have purchased Xperia X10a from AT&T currently running Android 1.6. I went through many posts in this forum but couldnot figure out what is the exact way to get Android 2.1 on this phone. I know AT&T has not rolled out 2.1 updates for this phone. I would appreciate if anybody could help me in finding an exact method to get Android 2.1 on my phone now.
Thanks in advance!!!
Click to expand...
Click to collapse
Read completely thru this then do search in Dev.
http://forum.xda-developers.com/showthread.php?t=827065
download this
http://www.multiupload.com/9N5BJ7II13
and extract it
you should have 2 folders, x10 flash and the firmware folder. inside the x10flash folder, you will need to create a folder and name it 2.1. open up the firmware folder, copy all contents from that folder and put it in the 2.1 folder you just created in the x10 flashtool folder.
on your phone, go to settings > applications > developement and make sure usb debugging is enabled.
turn your phone off and unplug the usb cable.
run the x10flashtool bat file on your computer. click flash, there will be a separate pop up. highlight 2.1, but do no click ok yet. on your phone (still off), hold the back button while plugging in the usb port. once you see the green LED on your phone, click ok on the flashtool.
it should start flashing.
once it finishes flashing, it may take a couple minutes for your phone to boot back up. if it doesn't turn back on after about 2 minutes after fininshing flashing, press the power button. it may take a few minutes to fully boot up.
once it boots up, click root on the flash tool and follow the instructions.
after rooting, download this
http://forum.xda-developers.com/showthread.php?t=833324
i would suggest only running the JIT option. unless you want to strip everything out of the firmware (you may loose some options you want).
after you get JIT enabled, go into market and purchase root explorer. excellent app to have. once you buy/install that, open root explorer, go to system/app, click mount as R/W. delete these apk's and only these ones (unless you think you want to use any of them)
backupandrestore
EManualLauncher
EManual
usersupport
creatouch
CrashSMS
FaceRecognition
moxiermail
PcCompanion
playnow*
Sync
SyncWizard
OmaDatasyncService
SEMCSetupWizard
trackid
wisepilot
chinesetextinput
Danish_Keyboard
SEMCTouchPalKoreanQWERTY
JapaneseIME
uWlopProvider
once you realize that timescape is useless, you can delete these:
Timescape.apk
TimescapePluginManager.apk
TimeScapeProvider.apk
TimescapeThemeBlue.apk
TimescapeThemeGreen.apk
TimescapeThemeIndigo.apk
TimescapeThemeOrange.apk
TimescapeThemeSakura.apk
i would also download launcherpro or another home launcher, after you install a new launcher, you can delete SemcHomeL.apk
reboot, enjoy
hi,
i downloaded the zip file. extracted it. but didn't find the x10flash folder in it. instead it only has DevID and Firmware folders. It has a X10flash windows batch file and X10flash executable JAR file.
so what do i do?
pratikjac said:
hi,
i downloaded the zip file. extracted it. but didn't find the x10flash folder in it. instead it only has DevID and Firmware folders. It has a X10flash windows batch file and X10flash executable JAR file.
so what do i do?
Click to expand...
Click to collapse
download using the link above but try using this tutorial..
http://forum.xda-developers.com/showthread.php?t=827065
fyzm345 said:
download using the link above but try using this tutorial..
http://forum.xda-developers.com/showthread.php?t=827065
Click to expand...
Click to collapse
i downloaded and am looking at the instructions it says
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
i dont see anything where i can run an .exe or where i can press flash
all i have in the folder is:
custom(folder)
x10flasher_lib(folder)
adb
adbWinApi.dll
AdbWinUsbApi.dll
USBFlash.dll
x10flash
x10flasher
in that order, where is the firmware package and how do i know if im missing loader.sin? also which one of those do i put the loader.sin into if i dont have it? im not understanding how to do this and to make matters worse i just rooted and loaded a custom rom on my captivate but im having trouble with the x10.
figured it out
Tchem said:
figured it out
Click to expand...
Click to collapse
how did you do it?
can you also let me know...;
thanks!!!!
Tchem said:
i downloaded and am looking at the instructions it says
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
i dont see anything where i can run an .exe or where i can press flash
all i have in the folder is:
custom(folder)
x10flasher_lib(folder)
adb
adbWinApi.dll
AdbWinUsbApi.dll
USBFlash.dll
x10flash
x10flasher
in that order, where is the firmware package and how do i know if im missing loader.sin? also which one of those do i put the loader.sin into if i dont have it? im not understanding how to do this and to make matters worse i just rooted and loaded a custom rom on my captivate but im having trouble with the x10.
Click to expand...
Click to collapse
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
how do i press Flash? i downloaded the file from the link you gave me in you first reply.
pratikjac said:
"Just add a new folder to the MAIN FOLDER of Flashtool which contains the firmware.
Now press Flash. The Tool will show you all firmwares which are stored in the FlasherFolder."
how do i press Flash? i downloaded the file from the link you gave me in you first reply.
Click to expand...
Click to collapse
The X10flash.bat is the flash tool.
pratikjac said:
how did you do it?
can you also let me know...;
thanks!!!!
Click to expand...
Click to collapse
What don't you understand?
Sent from my SAMSUNG-SGH-I897 using XDA App
Tchem said:
What don't you understand?
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
well i didnt do it because i am still not able to understand....
can you please give me a step by step instruction on rooting process you followed???
i would really appreciate it....thanks!!!
Phone reboots after sony ericsson logo!!!!
I ran the flash tool. flashed the phone. now as soon as i power on, the phone boots upto sony ericsson logo and then it reboots again. i dont know what to do... please help me....
pratikjac said:
I ran the flash tool. flashed the phone. now as soon as i power on, the phone boots upto sony ericsson logo and then it reboots again. i dont know what to do... please help me....
Click to expand...
Click to collapse
Remove battery. Wait 10 seconds. Put battery back in and power on.
Done!!!!
done....works like a charm...i had to wipe my data and reflash it again....
thanks a lot everyone....
i have a question....i see "H" network instead of 3G. is it normal?????
pratikjac said:
done....works like a charm...i had to wipe my data and reflash it again....
thanks a lot everyone....
i have a question....i see "H" network instead of 3G. is it normal?????
Click to expand...
Click to collapse
Yes it is normal. You can think of H as 3.5G which is better than 3G. It is what every U.S. wireless company is falsely advertising as 4G
I was just wondering about why my phone couldnot get this 'H' network aka 4G network when my phone was running android 1.6 and was not flashed???
batman_112 said:
The X10flash.bat is the flash tool.
Click to expand...
Click to collapse
When I run x10flash.bat, a DOS window appears and says :
C:\WINDOWS>system32\cmd.exe
Please choose:
1.)32-bit windows XP
2.)64-Bit Windows XP
3.)32-bit windows Vista/7
4.)64-Bit Windows Vista/7
Please choose1-4):
My PC is on Windows 7. I just can't proceed further.
I also downloaded the Flashtool version 0.2.6. When I ran Flash, a window pops up, but doesn't show any Firmware for me to select (eventhough I did created a new 2.1 folder that contains the firmware). PLEASE HELP!
s4tr2n said:
When I run x10flash.bat, a DOS window appears and says :
C:\WINDOWS>system32\cmd.exe
Please choose:
1.)32-bit windows XP
2.)64-Bit Windows XP
3.)32-bit windows Vista/7
4.)64-Bit Windows Vista/7
Please choose1-4):
My PC is on Windows 7. I just can't proceed further.
I also downloaded the Flashtool version 0.2.6. When I ran Flash, a window pops up, but doesn't show any Firmware for me to select (eventhough I did created a new 2.1 folder that contains the firmware). PLEASE HELP!
Click to expand...
Click to collapse
Does changing Vista/7 to Vista or 7 help, also you are not on latest flash tool.
SORTED!!!!
Flash Tool 0.2.5 worked for me where 0.2.4 didn't
http://forum.xda-developers.com/showthread.php?t=920746
Hi All,
I was trying to install Free X10 2.2 and something failed in the install process (dont know exactly what)
My X10 is now frozen on the white Sony Ericsson Boot Screen and wont go any futher.
I have attempted to repair through SEUS - Failed. (on a XP and a Win7 computer)
I have tried to flash back to 2.1 - Fail
I have also tried to flash back to 1.6 - Fail (the files that I found for 1.6 come up as being corrupted when I unzip them)
I have been back and forward through the forum (and the web) and I cannot find anything that can help me.
I need some serious help on this.
If anyone has ANY suggestions or idea please let me know.
I've been at this for "a little while"
Thank you,
Start again the phone and tap the back button to start he xRecovery.
Restore your system if you made the backup.
I had that problem and it worked for me.
Regards,
Tehouster
Hi,
I cannot open the xrecovery menu at all.
All the firmwares I have downloaded have corrupt system.sis files.
Am I right royaly stuffed??
hyperactivehorse said:
Hi,
I cannot open the xrecovery menu at all.
All the firmwares I have downloaded have corrupt system.sis files.
Am I right royaly stuffed??
Click to expand...
Click to collapse
Do a search rot unbrick, there are several flashes specifically for that.
Have done that....
Have used both XIOFUB and Flash Tool 0.2.4
From the firmware 2.1_2.0.A.504_GENERIC-x10A I cannot uncompress:
amiss.sin
kernel.sin
system.sin
It says "Files are broken"
Does anyone know where I can pick up just these 3 files?
Thank you,
The unbrick files you download are usally stand alone, no need to uncompress, use flash tool within file.
Attached shows content for AT&T folder.
Ok, so here is what I did:
I have a X10i with R1FB001 firmware with Android 1.6 and I flashed a X10i_2.0.A.0.504_Generic.ftf 2.1 firmware using X10FlashTool. Now I can’t turn on my phone anymore. First, it vibrated when I pressed the power button, but it remained turned off.
Sometimes when I plug it into my computer, if I let it long enough, it connects in flash menu and the LED turns green. I tried to install other firmware using SEUS but It sais I already have the latest software and I do not have a reinstall button.
I also flashed a X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 2.1 firmware but I get the same results. Also, despite the fact that I let it charge over the night, when I press the power button, the LED indicates that there is no battery.
Did I bircked my phone? Can someone help me?
Draganu said:
Ok, so here is what I did:
I have a X10i with R1FB001 firmware with Android 1.6 and I flashed a X10i_2.0.A.0.504_Generic.ftf 2.1 firmware using X10FlashTool. Now I can’t turn on my phone anymore. First, it vibrated when I pressed the power button, but it remained turned off.
Sometimes when I plug it into my computer, if I let it long enough, it connects in flash menu and the LED turns green. I tried to install other firmware using SEUS but It sais I already have the latest software and I do not have a reinstall button.
I also flashed a X10i_2.1.A.435_GLOBAL-GGL GENERIC 1232-9897 2.1 firmware but I get the same results. Also, despite the fact that I let it charge over the night, when I press the power button, the LED indicates that there is no battery.
Did I bircked my phone? Can someone help me?
Click to expand...
Click to collapse
i've had the same problem once. search for this firmware: ROOT_F3v3.rar on the forum(sorry cant find the link) and flash it. After that just update using seus or pc ompanion
Ok, I searched all over google and xda but I can't find ROOT F3V3 anywere. Most of the links ar from hotfile but they are broken. Can someone please send me a valid link, or reupload it somewere? Thanks
Draganu said:
Ok, I searched all over google and xda but I can't find ROOT F3V3 anywere. Most of the links ar from hotfile but they are broken. Can someone please send me a valid link, or reupload it somewere? Thanks
Click to expand...
Click to collapse
will upload it when i'm @ home, i'll pos the link tonight
Use the repair option on SEUS, should guide you though it.
Found it, flashed it, now it works. Thank you a lot. I got a bit scared. The only thing is that I am stuck at 1.6. I have rooted it, installed the files from xRecovery, but when I want to enter the recovery menu, and press back, noting happens.
But this is another problem. Should I start another topic?
Anyway, thank you a lot. You saved me!
Draganu said:
Found it, flashed it, now it works. Thank you a lot. I got a bit scared. The only thing is that I am stuck at 1.6. I have rooted it, installed the files from xRecovery, but when I want to enter the recovery menu, and press back, noting happens.
But this is another problem. Should I start another topic?
Anyway, thank you a lot. You saved me!
Click to expand...
Click to collapse
well you're back on 1.6 why not just update to 2.1 with seus or pc companion?
I think you did't install xrecovery the right way. Try it again or you could try and drop the xrecovery files in system/bin with root explorer
PC Companion and SEUS say that I have allready the latest software (wich I don't). As for xRecovery, I used the manual method with root explorer from the begining, because I couldn't install xRecovery as an app. I also tried to boot recovery with Quick Boot, but nothing. Any other ideas?
Draganu said:
PC Companion and SEUS say that I have allready the latest software (wich I don't). As for xRecovery, I used the manual method with root explorer from the begining, because I couldn't install xRecovery as an app. I also tried to boot recovery with Quick Boot, but nothing. Any other ideas?
Click to expand...
Click to collapse
Ok try this: install root explorer, open root explorer and go to /system. Change R/O into R/W(the button in the right top corner) search for a file called build.prop and long press it untill a menu pops up. Select 'open in text editor'. Scroll down to:
ro.semc.version.cust=XXXX-XXXX
ro.product.name=x10_XXXX-XXXX
(the XXXX-XXXX resamble some numbers)
and change both the XXXX-XXXX into 1232-9897 press menu, save & exit.
Reboot the phone and start up pc companion. Choose in pc companion the update option and choose repair and follow the procedure.\
good luck
kistigun said:
Ok try this: install root explorer, open root explorer and go to /system. Change R/O into R/W(the button in the right top corner) search for a file called build.prop and long press it untill a menu pops up. Select 'open in text editor'. Scroll down to:
ro.semc.version.cust=XXXX-XXXX
ro.product.name=x10_XXXX-XXXX
(the XXXX-XXXX resamble some numbers)
and change both the XXXX-XXXX into 1232-9897 press menu, save & exit.
Reboot the phone and start up pc companion. Choose in pc companion the update option and choose repair and follow the procedure.\
good luck
Click to expand...
Click to collapse
I tried it, but SEUS and PC Companion still say that I have the latest software. Last night I checked for an update from the phone menu, and I got an update to R2BA026, but still 1.6
Is there a way to flash a custom ROM without recovery menu? Any suggestions? Also, thank you very much for helping me. I had other Android phones and had no problems rooting them and installing custom ROMs, but this one is tricky. Thank you for the help! I really need it.
Draganu said:
I tried it, but SEUS and PC Companion still say that I have the latest software. Last night I checked for an update from the phone menu, and I got an update to R2BA026, but still 1.6
Is there a way to flash a custom ROM without recovery menu? Any suggestions? Also, thank you very much for helping me. I had other Android phones and had no problems rooting them and installing custom ROMs, but this one is tricky. Thank you for the help! I really need it.
Click to expand...
Click to collapse
Strange, i've flashed my x10 several times with this routine. After changing the numers in the build.prop did you restart the phone before you repaired it with pc companion?
I forgot to say this: before you repair the phone with pc companion go to windows explorer and go to this location(make sure you can see hidden files & folders):
C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\
And delete the folder called db
kistigun said:
Strange, i've flashed my x10 several times with this routine. After changing the numers in the build.prop did you restart the phone before you repaired it with pc companion?
I forgot to say this: before you repair the phone with pc companion go to windows explorer and go to this location(make sure you can see hidden files & folders):
C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\
And delete the folder called db
Click to expand...
Click to collapse
PC Companion does not repair the phone. I go through the process, but somewere it gives me a Installation error saying ”unable to install or start phone software update components”.
In Build.prop I don't have ro.semc.version.cust and ro.product.name at all.
I only have ro.semc.version.fs that has the XXXX-XXXX number.
I don't have the db folder in C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\ although I can see hidden files. I deleted the db folder from Update Service, but SEUS still says that there is no software update for my phone. And I don't have a Repair option in SEUS. I will try installing an older version, maybe it will give me the option to Repair
So... other ways to flash a custom ROM? Or some other way to enter the recovery menu?
Draganu said:
PC Companion does not repair the phone. I go through the process, but somewere it gives me a Installation error saying ”unable to install or start phone software update components”.
In Build.prop I don't have ro.semc.version.cust and ro.product.name at all.
I only have ro.semc.version.fs that has the XXXX-XXXX number.
I don't have the db folder in C:\Documents and Settings\All Users\Application Data\Sony Ericsson\Update Engine\ although I can see hidden files. I deleted the db folder from Update Service, but SEUS still says that there is no software update for my phone. And I don't have a Repair option in SEUS. I will try installing an older version, maybe it will give me the option to Repair
So... other ways to flash a custom ROM? Or some other way to enter the recovery menu?
Click to expand...
Click to collapse
I'm verry sorry i've made a mistake, you have to change the numbers in the default.prop file not in the build.prop file. Try it, it will work!
kistigun said:
I'm verry sorry i've made a mistake, you have to change the numbers in the default.prop file not in the build.prop file. Try it, it will work!
Click to expand...
Click to collapse
Ok, I did it and now PC companion says that I have a new software update. If I check from the phone menu, it also says that a 2.1 update is available and that I should install it from my PC.
When I click the update in PC companion and arrive at the second step, ”Prepare”, it is downloading something and then it says "Preparing your computer for software update" But it doesn't finish the step and it gives me a "Instalation error: unable to install or start phone software update components". Is this because of the phone or it has something to do with my laptop? I reinstalled PC companion, but I get the same thing.
I am begining to lose my fate and I can't stand the 1.6 timescaped system anymore. I want stock Froyo or Gingerbread (or at least official 2.1)
Draganu said:
Ok, I did it and now PC companion says that I have a new software update. If I check from the phone menu, it also says that a 2.1 update is available and that I should install it from my PC.
When I click the update in PC companion and arrive at the second step, ”Prepare”, it is downloading something and then it says "Preparing your computer for software update" But it doesn't finish the step and it gives me a "Instalation error: unable to install or start phone software update components". Is this because of the phone or it has something to do with my laptop? I reinstalled PC companion, but I get the same thing.
I am begining to lose my fate and I can't stand the 1.6 timescaped system anymore. I want stock Froyo or Gingerbread (or at least official 2.1)
Click to expand...
Click to collapse
hm okay, we are a step closer did you also try it with SEUS? (dont forget: if you are going to use seus you have to delte the db folder in C:\Program Files\Sony Ericsson\Update Service)
Or can you try it on a different computer?
kistigun said:
hm okay, we are a step closer did you also try it with SEUS? (dont forget: if you are going to use seus you have to delte the db folder in C:\Program Files\Sony Ericsson\Update Service)
Or can you try it on a different computer?
Click to expand...
Click to collapse
Tried with SEUS, still says I already have the latest software, and it shows me no repair button (Deleted the db folder, although, when I start SEUS, db comes back as it was before. I deleted it after I started SEUS, but I can't delete 2 files, because they are being used by the program). I am using the version 2.11.1.9 and tried to install a earlier version, but even that installs this one.
Tried from another computer but same results.
Any other tricks? Maybe some that can help me install a custom ROM?
If your an at & t user this maybe of interest to you http://forum.xda-developers.com/showthread.php?t=1012380 or perhaps just download the flashtool (follow a link in my sig) and a global generic 2.1 rom from xda and flash it with flashtool. Or just go nuts and install a custom rom which you can learn all about how to do from my guide when you have 2.1 running. Hopefully this will be of some use to you.
Edit use this one http://forum.xda-developers.com/showthread.php?t=885956 it comes pre rooted a.d with xrecovery already installed, use the flashtool to flash it ;-)
Sent from my X10 using XDA Premium App
The Gingerbread Man said:
If your an at & t user this maybe of interest to you http://forum.xda-developers.com/showthread.php?t=1012380 or perhaps just download the flashtool (follow a link in my sig) and a global generic 2.1 rom from xda and flash it with flashtool. Or just go nuts and install a custom rom which you can learn all about how to do from my guide when you have 2.1 running. Hopefully this will be of some use to you.
Edit use this one http://forum.xda-developers.com/showthread.php?t=885956 it comes pre rooted a.d with xrecovery already installed, use the flashtool to flash it ;-)
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Vodafone user, Romania!
Ok cool, the second link I provided should be good for you to use. Its a generic 2.1 pre rooted with xrecovery pre installed. You need the flash tool to install it and you can find a link to it through my guide in my signiture and a link to the flashtool for noobs thread. You should be ok after
Sent from my X10 using XDA Premium App
The Gingerbread Man said:
Ok cool, the second link I provided should be good for you to use. Its a generic 2.1 pre rooted with xrecovery pre installed. You need the flash tool to install it and you can find a link to it through my guide in my signiture and a link to the flashtool for noobs thread. You should be ok after
Sent from my X10 using XDA Premium App
Click to expand...
Click to collapse
Ok, but what about this: "You need rooted 2.1 rom with xRecovery working to install this firmware! If you already flashed the latest firmware with SEUS, please downgrade OR root it using THIS thread." ??
And this: "3. Boot into xRecovery and install update.zip" ? I can't install xRecovery either. Tried also to reboot recovery from flashtool, but does not work. (I have done all the steps with manual instalation of xRecovery files)
I have 1.6, I flashed a 2.0.A.0.504_Generic.ftf before, but after doing so, my phone does not turn on. I will try your method and post the result. Hopefully it works.
Hi, everyone I just joined this forum. I have X10i with firmware 2.1. While searching the thread i came acrosss terms like root, xrecovery, flashing, MT, generic etc. Can someone help me out what these terms mean. I wanted to upgrade my phone to gingerbread. Previously I am an iphone user So i am total noob to this OS and the phone
Thanks in advance
good get away from iphone
root--same thing as jailbreak
xrecovery-- a badass tool that lets you flash roms onto your phone.
flashing-- umm... it is like installing a modified version of even the legit version on the device
generic-- A product having no brand name or registered trademark
example= for device there is branded or non branded
branded means that a company like ATT or Rogers approves that firmware or OS version. So when you turn your phone on, you will usually see something related to them. like an animation of the att world
generic--- clean install. no company restrictions. just regular
ok links for all that crap above
2.3.3 firmware (does not matter if you download x10a or x10i)
Generic-----
http://forum.xda-developers.com/showthread.php?t=936733
do yourself a favor and read
http://forum.xda-developers.com/showthread.php?t=936733 before and download the program WINDOWS only
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
angel eyes said:
Thanks for your help. I am going to upgrade my phone soon so is their any problem in doing so and by the way should i just use the SEUS or flash tool
Click to expand...
Click to collapse
Either will do.
ok thanks for the advice going for the upgrade now lets hope everything goes smoothly will post the results
Now this is the end result of upgrading my phone I used SEUS to upgrade my X10i the phone went into flash mode and the SEUS detect that new software is available soit downloads it but when it comes to installing it stopped at about 15% and said that updATE cannot continue check battary is fully charged and than again try. As far is i remember phone was fully charged when i put it for update now what should i do. The phone doesnt restarts now and when I power up my phone only th egreen led blinks and it vibrates for split second than nothing I waited for it but the phone is not responding what should i do now
HELP NEEDED
to tell you the truth i dont know what SEUS is
i think it is for drivers or something but you should use PC comapanion for drivers
ok
use flashtool in the first link i gave you and download one of the 2.3.3 files
or use a 2.3.3 rom
and flash the sucker on
it should work
Try flashtool if doesn't work let your phone on charge for 1 hour and take it off try again whit seus should be good to go
Sent from my X10i using xda premium
Thanks for the help guys now i have downlaoded flashtool 0.2.8, 2.9,3.0 i also downloaded the firmware and did all the steps according to the toturiol but that what happens it detect the phone in flash mode the flashing starts but at fato1.sin it gives as error message "error flashing abort". I also tried other firmwares but the same error.
Now guys I think I am great trouble so need help
What to do next
And I used the desktop charger to charge the battery for whole two houra but SEUS gives the same error plus pc companion gives error as well i am stuck
Go to pc application manager, close seus and pc companion. Try flashtool tool once again http://forum.xda-developers.com/showthread.php?t=928343. I hope this work for you.
Sent from my SO-01C using Tapatalk
Ok i will try that one too thanks alot lets see wat happens
ok tried that too nu luck
What should i Do now One thing more i was goignaround the threads looking for solution So in one thread it said that firmware can ber installed through flash tool 0.2.5
I tried that too and amazingly the flashing goes all the way to the end on 0.2.5 in the end i get the msg that flashing complete and remove the phone but when i remove the phone and turn it on it just vibrates and small blip of green flash led than nothing
What could be the problem
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Thanks for advice downloading it now and going to try and will let now about the results
sasukewa said:
1. Download Flashtool from
http://doomlord.sylvester20007.com/x10/x10_gb/FlashTool_0.2.9.1-GBready_root_xRec.exe
2. Download the generic 2.3 ROM of your choice
http://forum.xda-developers.com/showpost.php?p=11038646&postcount=1
Personally I would get the Global version unless you can find your country specific one.
Global version download - http://www.multiupload.com/JEXUAHAZTL
3.
a) connect your phone to your PC, make sure it installs the drivers (if your Sony software is working it is fine)
b) Extract Flashtool into a directory you know
c) Extract the firmware file you downloaded. And move the ftf file into the "firmware" directory of Flashtool
d) Make sure your phone is not connected to the PC and is off.
e) Run Flashtool, click on Flash and select the firmware you have just downloaded.
f) It will give you the same instruction - holding the "back" key, (phone still off) connect it to the PC. If you did this correctly, the light will be green and it will start flashing your phone.
g) After it is completed, reboot your phone once or twice and check that it is working.
4. Installing xrecovery and rooting refer to instructions (you already have all the files from when you download in step 1)
http://forum.xda-developers.com/showthread.php?t=1196808
Let me know when you have completed the steps above.
Click to expand...
Click to collapse
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Do you have the new flash tool?
angel eyes said:
I have done it as adviced but no luck flashing aborts in the middle and giving error message now wehat should i do
Click to expand...
Click to collapse
Can u do a screen shot or tell us what the error message is?
Thx.
Dark Nightmare said:
Do you have the new flash tool?
Click to expand...
Click to collapse
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
When you reboot is there anything showing on the screen? Sony logo...anything? If yes, wait it can take a long time for a new rom to install. If no, I think you need to revert back to the 2.1 rom, root and install busybox, superuser, and xrecovery. once thats done you can backup your rom and data so you don't get stuck updating or if you have trouble with a custom rom etc. Also I think your battery stats should be wiped using xrecovery, it sounds like SEUS checked this and the file said your battery was too low to continue the update. Here is a good place to start.
http://forum.xda-developers.com/showthread.php?t=928343&highlight=flashtool+for+noobs
Here is a video on youtube that may help too:http://www.youtube.com/watch?v=HmX-IYNYqL8
Hope this helps you, Good Luck.
angel eyes said:
I have flash tool 0.2.5,0.2.8,0.2.9,0.3.0
Have tried them all only 0.2.5 goes all the way to the end but when i turn on the phone it only virbrates and green led flashes for sec than nothing
Click to expand...
Click to collapse
Try taking the battery out and then try flashing again. Which ftf file are you flashing or selecting in the flash program. You need to use at least a 0.2.9 version of the flashtool.... if you use 0.2.5 start with the 2.1.54 ROM first.
I'm new to this forum and I hope to get some help from the community...
Device:
Sony Xperia Z Ultra (C6833), Android 5.1.1 (Lollipop) rooted, Built: 14.6.A.1.236 , Developer's mode & USB-Debugging enabled
Problem:
After updating SuperSU to 2.82 I had a bootloop. Did shutdown using small red button, restarted using recobery mode of TRWP (2.8.7.0) and did factory reset. Everything works again (WLAN, Apps, SD card access) but except the SIM card which is not recognized. IMEI not shown "About the phone", but correctly shown in diagnosis tool
Already tried:
- SuperSU 2.82 installed manually via TWRP. Works.
- Restored a full backup Sony PC-Companion, no success. Same with a Snappea backup.
- SIM proofed with different cell phone, works
- Other working SIM card tried with this phone, no success
- I blew a couple of times into the SIM card slot, no success
- Flashed the full ROM (14.6.A.1.236, rooted), no success
- Tried another factory reset, no success
I guess, there is a problem with the modem driver for the SIM card reader. Any ideas how to fix this?
I'm a newby to root & stuff but I'm hoping, that somebody could help me. I'm very thankful for any hints!
Greetings from Germany!
Not sure how the imei got tweaked by updating the supersu..?
But I had the same bootloop with the new supersu on latest stock rom rooted.
Manually removing all root and manually flash the new via twrp didn't work for me either.
Flashed the old supersu and it boots fine.. so I just keep the update in playstore and don't press it.
Perhaps I will repack the supersu app to generate a unique file signature so it won't show up in play store on installed apps.
Perhaps the simcard got tweaked in the tray when you pushed the red button somehow? ...I dunno. Just a thought.
I have had issues with mine too. The tray is very flippy floppy and have gotten stuck several times inside the phone.
But have you tried flashing stock rom with flashtool?
http://www.flashtool.net/downloads.php
Make sure that none of the options is ticked in "exceptions" so all partitions being flashed.
Do you know how to use flashtool?
SUPERUSER said:
Not sure how the imei got tweaked by updating the supersu..?
But I had the same bootloop with the new supersu on latest stock rom rooted.
Manually removing all root and manually flash the new via twrp didn't work for me either.
Flashed the old supersu and it boots fine.. so I just keep the update in playstore and don't press it.
Perhaps I will repack the supersu app to generate a unique file signature so it won't show up in play store on installed apps.
Perhaps the simcard got tweaked in the tray when you pushed the red button somehow? ...I dunno. Just a thought.
I have had issues with mine too. The tray is very flippy floppy and have gotten stuck several times inside the phone.
But have you tried flashing stock rom with flashtool?
http://www.flashtool.net/downloads.php
Make sure that none of the options is ticked in "exceptions" so all partitions being flashed.
Do you know how to use flashtool?
Click to expand...
Click to collapse
Hi @SUPERUSER can you please look int this thread and advise ... i am freaking out due to this
https://forum.xda-developers.com/xp...ev-plz-help-m-options-modem-baseband-t3623391
rgds
SUPERUSER said:
Not sure how the imei got tweaked by updating the supersu..?
But I had the same bootloop with the new supersu on latest stock rom rooted.
Manually removing all root and manually flash the new via twrp didn't work for me either.
Flashed the old supersu and it boots fine.. so I just keep the update in playstore and don't press it.
Perhaps I will repack the supersu app to generate a unique file signature so it won't show up in play store on installed apps.
Perhaps the simcard got tweaked in the tray when you pushed the red button somehow? ...I dunno. Just a thought.
I have had issues with mine too. The tray is very flippy floppy and have gotten stuck several times inside the phone.
But have you tried flashing stock rom with flashtool?
...URL...
Make sure that none of the options is ticked in "exceptions" so all partitions being flashed.
Do you know how to use flashtool?
Click to expand...
Click to collapse
Hi SUPERUSER, thanks for your quick reply!
It can't be the SIM card itself, since it works with my other phone. Also tried my GFs SIM in the C6833, also failed. Should be a ROM problem.
Tried to go back to SuperSU 2.79, 'cause that's how this mess all started (updating SuperSU), have the bootloop again, went back to 2.82. Works fine except the undetected SIM card.
Also tried 2 (probably dirty) modem fixes, this caused also loose of IMEI. Went back to my full backup using TWRP, where everything works (IMEI ok) except SIM card problem.
Just installed the flashtool, but it says, that the bootloader is locked. Unlocking it officially thru Sony website (developer.. sonymobile..com/unlockbootloader) requires installing full Android Suite (1.9GB) and further driver installtion using SDK manager. Is this the only way to use the flashtool? Other question regarding the Flashtool: Tutorials say: Copy ftf-File into the "firmware" folder, but there is no folder with this name. I checked the entire flashtool folder tree.
Isn't it possible to flash ROM in zip-format only using TWRP? Should I give DualRecovery a try too?
Thanks a lot! Appreciate your help!
ac845 said:
Hi SUPERUSER, thanks for your quick reply!
It can't be the SIM card itself, since it works with my other phone. Also tried my GFs SIM in the C6833, also failed. Should be a ROM problem.
Tried to go back to SuperSU 2.79, 'cause that's how this mess all started (updating SuperSU), have the bootloop again, went back to 2.82. Works fine except the undetected SIM card.
Also tried 2 (probably dirty) modem fixes, this caused also loose of IMEI. Went back to my full backup using TWRP, where everything works (IMEI ok) except SIM card problem.
Just installed the flashtool, but it says, that the bootloader is locked. Unlocking it officially thru Sony website (developer.. sonymobile..com/unlockbootloader) requires installing full Android Suite (1.9GB) and further driver installtion using SDK manager. Is this the only way to use the flashtool? Other question regarding the Flashtool: Tutorials say: Copy ftf-File into the "firmware" folder, but there is no folder with this name. I checked the entire flashtool folder tree.
Isn't it possible to flash ROM in zip-format only using TWRP? Should I give DualRecovery a try too?
Thanks a lot! Appreciate your help!
Click to expand...
Click to collapse
Whats causing your problem is probably that your bootloader is locked.
But I'm not getting how you use twrp and flashing files if the bootloader is locked?
You can flash stock roms with locked bootloader. It dont require to unlock it.
You don't need to download the whole SDK for just using fastboot.
If you need fastboot you can download fastboot from here: https://forum.xda-developers.com/showthread.php?t=2588979
After install choose the right driver for your togari in device manager to "Android bootloader interface"
SUPERUSER said:
Whats causing your problem is probably that your bootloader is locked.
But I'm not getting how you use twrp and flashing files if the bootloader is locked?
You can flash stock roms with locked bootloader. It dont require to unlock it.
You don't need to download the whole SDK for just using fastboot.
If you need fastboot you can download fastboot from here: https://forum.xda-developers.com/showthread.php?t=2588979
After install choose the right driver for your togari in device manager to "Android bootloader interface"
Click to expand...
Click to collapse
Thanks again!
Fastboot sucessfully installed using your link, but I have a driver problem. The device works fine connected to the pc using Sony PC Companion oder Snappea. Do I need a different driver for running fastboot? Found "S1Boot Fastboot" in "Devices and printers" on my pc and I'm aware that the correct driver has to be installed manually, just don't know where to get it. Google didn't help much, I'm only found a zip on Sony web, which probably does not contain the one file I need for running fastboot.... Any hints?
ac845 said:
Thanks again!
Fastboot sucessfully installed using your link, but I have a driver problem. The device works fine connected to the pc using Sony PC Companion oder Snappea. Do I need a different driver for running fastboot? Found "S1Boot Fastboot" in "Devices and printers" on my pc and I'm aware that the correct driver has to be installed manually, just don't know where to get it. Google didn't help much, I'm only found a zip on Sony web, which probably does not contain the one file I need for running fastboot.... Any hints?
Click to expand...
Click to collapse
PC companion is screwing you over because it has its own signed drivers. Perhaps these are proprietary and don't work with universal fastboot.
If you installed the 15 seconds ADB Installer v1.4.3 from the thread I linked AND installed the google driver when you were asked if you wanted.
Connect your phone in fastboot. Then choose the driver manually from a list. Scroll down to "Android Device" and select "Android Bootloader Interface"
You will get a warning that the driver might not work. Click yes and soon the device will be found and your phone will respond to fastboot commands.
If you need all drivers for example the flashmode driver you can download and install flashtool.
Then you get a folder with a driver pack in C:\Flashtool\drivers. The executable contains all the drivers to every xperia device.
Edit:
If you ever need the driver pack from flashtool I uploaded it to mega:
https://mega.nz/#!BdIlEIAQ!QQyFnhLYBZjMwe-rkfWmyVagMg9GL5qr7zwPuBKSjQw
SUPERUSER said:
PC companion is screwing you over because it has its own signed drivers. Perhaps these are proprietary and don't work with universal fastboot.
If you installed the 15 seconds ADB Installer v1.4.3 from the thread I linked AND installed the google driver when you were asked if you wanted.
Connect your phone in fastboot. Then choose the driver manually from a list. Scroll down to "Android Device" and select "Android Bootloader Interface"
You will get a warning that the driver might not work. Click yes and soon the device will be found and your phone will respond to fastboot commands.
If you need all drivers for example the flashmode driver you can download and install flashtool.
Then you get a folder with a driver pack in C:\Flashtool\drivers. The executable contains all the drivers to every xperia device.
Edit:
If you ever need the driver pack from flashtool I uploaded it to mega:
https://mega.nz/#!BdIlEIAQ!QQyFnhLYBZjMwe-rkfWmyVagMg9GL5qr7zwPuBKSjQw
Click to expand...
Click to collapse
Cheers! Couple of steps further! Drivers installed, fastboot detects the device now, I unlocked the bootloader successfully using fastboot. Device now recognized by the Flashtool too.
How to flash the custom ROM now? Better using fastboot or the Flashtool? I'd prefer the flashtool due to my limited cmd experiences. But I don't know how to select the FTF-file, which I already downloaded.
Don't know how to add screenshots here directly, so I added 2 attechments: Flashtool Main Screen and Folder sctructure of Emma. There is no "firmware" folder where I can drop the FTF-file to.
If using fastboot, ftf-file won't work, right? Zip-Files only?
How to proceed? Cheers, again!
ac845 said:
Cheers! Couple of steps further! Drivers installed, fastboot detects the device now, I unlocked the bootloader successfully using fastboot. Device now recognized by the Flashtool too.
How to flash the custom ROM now? Better using fastboot or the Flashtool? I'd prefer the flashtool due to my limited cmd experiences. But I don't know how to select the FTF-file, which I already downloaded.
Don't know how to add screenshots here directly, so I added 2 attechments: Flashtool Main Screen and Folder sctructure of Emma. There is no "firmware" folder where I can drop the FTF-file to.
If using fastboot, ftf-file won't work, right? Zip-Files only?
How to proceed? Cheers, again!
Click to expand...
Click to collapse
You downloaded the SONY EMMA flashtool. Not the one we need.
The name is a bit confusing because they are called the same.
The flashtool we need is this one. Download it via torrent its the fastest way.
http://www.flashtool.net/downloads.php
Uninstall Emma and install this flashtool.
...time for some ugly doodling
When you are done installing flashtool and are met with the UI you will see a main window as in image one. Press this button on the far right with the XF logo.
A new window will open with the name XperiFirm as in image two. Scroll down the list on the far left until you see the Togari.
Select your device. In my case I have the C6833. Now go to the list in in the middle. Click the "check all" button to fetch all updates.
When this is finished you will see a the latest "version number" on every "operator" in the collumn to the right.
Click the stock rom you would like to download in the list that correspond to where you live.
I always download customized DE because it includes the region I live in. Now look at the list to the right.
A list will appear under the "Available Firmware:". Click on the one you want to download. In this case there is only one entry.
Almost all older stock rom has been removed lately so it is very rare that you will find any old based on jelly bean or kitkat.
Anyway. When you click the one you want to download a new window will open as shown in image three
You will see some info. Double check the name is the one you want to download. If its right. Click download and make a coup of coffee.
When the download is finished you can close the window and let flashtool do its job. When its done.
You can see it in the log when it says its finished.
Now you want to press the button all the way to the left. That thunderbolt icon as shown in image four
A new window will open. Select flashmode and press ok as shown in image five
A new window will open and here you can see a list of which stock roms you have downloaded as shown in image six
Select the one you want to flash and look to the right in the "Exclude:" box. Make sure nothing is ticked.
And press flash when you are ready. And follow the instructions following by flashtool when it is ready.
Optional
If your phone is not detected in flashmode you need to install S1 - flashmode driver. You can do so by follow these steps.
Go to this folder as shown here in image seven
Execute the file as shown here in image eight
Select Flashmode Drivers as shown in image nine You don't need to select fastboot drivers. Because you already have this working.
If you want you can scroll down and select Xperia Z Ultra drivers as shown in image ten however this seems to fail in Windows due to driver signature verification.
Its not necessary to select it. Click install and hopefully the device will be seen when connected in flashmode.
For zip files. What you find here on the forum. You flash these in recovery. Not very difficult. You can find loads of guide on how to get started learning how to use recovery mode.
.img files. You flash via fastboot with cmd. Not very difficult either. Key tip here is to don't make typos or you need to rewrite the whole command again..which get boring fast.
SUPERUSER said:
You downloaded the SONY EMMA flashtool. Not the one we need.
The name is a bit confusing because they are called the same.
The flashtool we need is this one. Download it via torrent its the fastest way.
http://www.flashtool.net/downloads.php
Uninstall Emma and install this flashtool.
...time for some ugly doodling
When you are done installing flashtool and are met with the UI you will see a main window as in image one. Press this button on the far right with the XF logo.
A new window will open with the name XperiFirm as in image two. Scroll down the list on the far left until you see the Togari.
Select your device. In my case I have the C6833. Now go to the list in in the middle. Click the "check all" button to fetch all updates.
When this is finished you will see a the latest "version number" on every "operator" in the collumn to the right.
Click the stock rom you would like to download in the list that correspond to where you live.
I always download customized DE because it includes the region I live in. Now look at the list to the right.
A list will appear under the "Available Firmware:". Click on the one you want to download. In this case there is only one entry.
Almost all older stock rom has been removed lately so it is very rare that you will find any old based on jelly bean or kitkat.
Anyway. When you click the one you want to download a new window will open as shown in image three
You will see some info. Double check the name is the one you want to download. If its right. Click download and make a coup of coffee.
When the download is finished you can close the window and let flashtool do its job. When its done.
You can see it in the log when it says its finished.
Now you want to press the button all the way to the left. That thunderbolt icon as shown in image four
A new window will open. Select flashmode and press ok as shown in image five
A new window will open and here you can see a list of which stock roms you have downloaded as shown in image six
Select the one you want to flash and look to the right in the "Exclude:" box. Make sure nothing is ticked.
And press flash when you are ready. And follow the instructions following by flashtool when it is ready.
Optional
If your phone is not detected in flashmode you need to install S1 - flashmode driver. You can do so by follow these steps.
Go to this folder as shown here in image seven
Execute the file as shown here in image eight
Select Flashmode Drivers as shown in image nine You don't need to select fastboot drivers. Because you already have this working.
If you want you can scroll down and select Xperia Z Ultra drivers as shown in image ten however this seems to fail in Windows due to driver signature verification.
Its not necessary to select it. Click install and hopefully the device will be seen when connected in flashmode.
For zip files. What you find here on the forum. You flash these in recovery. Not very difficult. You can find loads of guide on how to get started learning how to use recovery mode.
.img files. You flash via fastboot with cmd. Not very difficult either. Key tip here is to don't make typos or you need to rewrite the whole command again..which get boring fast.
Click to expand...
Click to collapse
Followed all your instructions. Custom ROM flash with (the correct) Flashtool was succesful. Now comes the hopefully magic moment, where I'm gonna reboot and see if SIM card will be detected....
ac845 said:
Followed all your instructions. Custom ROM flash (C6833_14.6.A.1.236_Customized_DE.ftf) with (the correct) Flashtool was succesful. Now comes the hopefully magic moment, where I'm gonna reboot and see if SIM card will be detected....
Click to expand...
Click to collapse
SIM card NOT detected. I'm freakin' out!
Again tried the SIM card in 2 other phones, no problems. Tray and contacts shouldn't be the problem either, because I didn't to anything with SIM card and tray when the problem came up first after the stupid update of SuperSU and the following bootloop. Just pressed the tiny red panic button to shut down and went into recovery mode.
Just tried to use some thin folie between the tray and the SIM card in order to have some more pressure between SIM card and the contacts, failed.
Is it technically possible that a full custom ROM flash (with no ticked exceptions) still not formated the probably damaged SIM card modem portion/driver?
User pintspin has the same problem as above and he is much more into the topic than I am.
Still any hints? Wanted to avoid buying a new smartphone, still love the Ultra C6833 and its large screen...
ac845 said:
SIM card NOT detected. I'm freakin' out!
Again tried the SIM card in 2 other phones, no problems. Tray and contacts shouldn't be the problem either, because I didn't to anything with SIM card and tray when the problem came up first after the stupid update of SuperSU and the following bootloop. Just pressed the tiny red panic button to shut down and went into recovery mode.
Just tried to use some thin folie between the tray and the SIM card in order to have some more pressure between SIM card and the contacts, failed.
Is it technically possible that a full custom ROM flash (with no ticked exceptions) still not formated the probably damaged SIM card modem portion/driver?
User pintspin has the same problem as above and he is much more into the topic than I am.
Still any hints? Wanted to avoid buying a new smartphone, still love the Ultra C6833 and its large screen...
Click to expand...
Click to collapse
I will ask him if I can obtain the ones that worked for him/her.
The modem should be flashed when you flashed the ftf file if the baseband portion is included.
This is the one I found in the thread ResurrectionRemix 5.8.3 25/05/17 [7.1.2] Nougat for Togari,
https://forum.xda-developers.com/showpost.php?p=56234199&postcount=16
And this:
https://forum.xda-developers.com/xperia-z-ultra/help/aosp-rom-sim-detection-t3185526/post62481536
I know I have used one other way back. It was two zips. You flashed them in a specific order or the phone would not boot.
But I can't find this one.
I uploaded my own modem files. Its the same files that is in the zip above but with the stock rom Im running.
Im guessing it might do something because its working on my phone. And its the same files that is being flash in the above zip file.
File is not flashable. Unzip and replace the in system/etc/firmware. Permissions 644. And reboot.
Or you could do it from twrp. Take a bit longer. Manually delete the three files one by one and then copying the files one by one.
Setting the permissions to 644 one by one.
SUPERUSER said:
I will ask him if I can obtain the ones that worked for him/her.
The modem should be flashed when you flashed the ftf file if the baseband portion is included.
This is the one I found in the thread ResurrectionRemix 5.8.3 25/05/17 [7.1.2] Nougat for Togari,
https://forum.xda-developers.com/showpost.php?p=56234199&postcount=16
And this:
https://forum.xda-developers.com/xperia-z-ultra/help/aosp-rom-sim-detection-t3185526/post62481536
I know I have used one other way back. It was two zips. You flashed them in a specific order or the phone would not boot.
But I can't find this one.
I uploaded my own modem files. Its the same files that is in the zip above but with the stock rom Im running.
Im guessing it might do something because its working on my phone. And its the same files that is being flash in the above zip file.
File is not flash-able. Unzip and replace the in system/etc/firmware. Permissions 644. And reboot.
Or you could do it from twrp. Take a bit longer. Manually delete the three files one by one and then copying the files one by one.
Setting the permissions to 644 one by one.
Click to expand...
Click to collapse
@SUPERUSER done , uploaded here the working modem patch strangely from a different variant but worked fine... thanks for above help as well.
I can confirm that the attached modem patch is working perfectly fine ... on AOSP build ( 6.0.1 )
(*) @ac845 steps i suppose you already have your system.img and boot.img
Flash the aosp Rom images ( system.img ) and (boot.img) via fast boot OR if you dont have images of stock then just flash any stock rom zip from recovery i used twrp recovery after FULL WIPE OR if you even dont have both then just use Scrubber port GPE for togari 6833 z ultra
don't reboot
Flash the attached modem patch i.e. C6802_modem_patch.zip
reboot to system
on first boot it will take a bit ( 1 minute may be ) to detect and register the sim.
I have finished worked on my rom as well , will going to upload it hopefully today ... its purest aosp stock , can be rooted and gapps are also tested working fine , there is no Imei base band issue as well.
pintspin said:
@SUPERUSER done , uploaded here the working modem patch strangely from a different variant but worked fine... thanks for above help as well.
I can confirm that the attached modem patch is working perfectly fine ... on AOSP build ( 6.0.1 )
(*) @ac845 steps i suppose you already have your system.img and boot.img
Flash the aosp Rom images ( system.img ) and (boot.img) via fast boot OR if you dont have images of stock then just flash any stock rom zip from recovery i used twrp recovery after FULL WIPE OR if you even dont have both then just use Scrubber port GPE for togari 6833 z ultra
don't reboot
Flash the attached modem patch i.e. C6802_modem_patch.zip
reboot to system
on first boot it will take a bit ( 1 minute may be ) to detect and register the sim.
I have finished worked on my rom as well , will going to upload it hopefully today ... its purest aosp stock , can be rooted and gapps are also tested working fine , there is no Imei base band issue as well.
Click to expand...
Click to collapse
I (partially) understand, what you guys mean, but I don't know how to proceed and thus have to ask more beginner questions:
As recommened by SUPERUSER like 2 days ago I flashed a the .276 stock ROM. The device is of course unrooted now, bootloader open. I don't have a recovery mode (f.i. TWRP) where I can flash ZIPs. What would be the easeast way to flash a ZIP-file in this situation? I could try flashing with fastboot, but I don't know where to get the right .imgs. Wished I still had TWRP though. Sorry for bothering you, but for beginners like me it's too complex sometimes...
ac845 said:
I (partially) understand, what you guys mean, but I don't know how to proceed and thus have to ask more beginner questions:
As recommened by SUPERUSER like 2 days ago I flashed a the .276 stock ROM. The device is of course unrooted now, bootloader open. I don't have a recovery mode (f.i. TWRP) where I can flash ZIPs. What would be the easeast way to flash a ZIP-file in this situation? I could try flashing with fastboot, but I don't know where to get the right .imgs. Wished I still had TWRP though. Sorry for bothering you, but for beginners like me it's too complex sometimes...
Click to expand...
Click to collapse
Download this file https://www.androidfilehost.com/?fid=24415232478676273
To make it more simple. Rename the file to "recovery" without the quotes when the download is finished.
In your download folder on your computer hold down shift on your keyboard and right click on an empty space.
In the right click menu select "open command window here".
In the cmd. Type "fastboot flash recovery recovery.img".
Turn your phone off. And boot it to fastboot. Hold volume up or down and simultaneously connect the usb cable to the computer.
If you did it right the phone should have a blue led on.
Now press enter on your keyboard inside the command window.
Hopefully you will see something like flashing and then finished.
How to boot to recovery?
Pull out the usb cable.
Now hold volume down and press power button.
When it vibrates let go. A few seconds you will se the twrp ui.
In addition to super user post above : For fast boot you need to press volume up and then connect PC USB cable when your PC is on and USB cable is connected to it ( you also need yo ensure that USB debugging is turned on ) goto phone setting and you need to press 8 times on build number in your about phone n phone will open a hiden option called developers option under phone settings and goto developer options n under that option you need yo select USB debugging on .
pintspin said:
In addition to super user post above : For fast boot you need to press volume up and then connect PC USB cable when your PC is on and USB cable is connected to it ( you also need yo ensure that USB debugging is turned on ) goto phone setting and you need to press 8 times on build number in your about phone n phone will open a hiden option called developers option under phone settings and goto developer options n under that option you need yo select USB debugging on .
Click to expand...
Click to collapse
TWRP succesfully installed. Great to have it back!
But now it comes: SIM CARD DETECTED AGAIN after 2 weeks and endless hours of fiddling, reading forums and bothering you guys. You both are awesome :angel: and made my day!
What I did:
1. TWRP installed
2. full wipe
3. installed prerooted custom rom 14.6.A.1.236: Customized Germany (DE), source: https://www.android-hilfe.de/thema/stock-roms-mirror-root-tools-anleitung.559556/ Link: https://mega.nz/#!PoEElBZa!DlejjkTzCZGMXbJR0ZvgTk5i0gNqo4QSM0LIyyRKl1M
4. installed SUPERUSER's modem patch from above
5. rebooted: 1. time no SIM card detected. Wanted start crying :crying:, but rebooted 2nd time: SUCCESS! Broadband of my provider is back!
Now restoring messages, contacts and apps right now using Snappea. After reorganzing apps I'll do full TWRP backup and I hope that this problem never will occur.
During restore app process I'll go to a German beer garden and will raise my glass to you guys! :laugh: Want to donate both of you some money, please let me know how. Paypal?
Greetings from Germany!
George
Happy midsummer!
Well I find my joy in helping someone with their technical issues and it makes me happy when we find a solution. Its why I'm here..
I don't believe in exchanging knowledge for money unless its my job.
But I thank you for your gratefulness! cheers! :highfive:
:good::laugh: great to know you solved this ... Enjoy the weekend with ur phone revive ... I am glad that it worked coz I can feel what it like to be Co I went some what same situation .... Just keep us in ur prayers ...
pintspin said:
:good::laugh: great to know you solved this ... Enjoy the weekend with ur phone revive ... I am glad that it worked coz I can feel what it like to be Co I went some what same situation .... Just keep us in ur prayers ...
Click to expand...
Click to collapse
Unfortunately it's not over yet!
SIM still not detected very often, but sometimes it does. SIM works for some hours but then it's accidently not detected anymore in locked-screen mode or in the middle of operation, app usage etc. Rebooting with detected SIM works in 1 of 5 times maybe. Restoring full backups doesn't make any difference.
Had the idea that it is a temperature problem and cooled the device down in the frosting fridge for a couple of minutes, but rebooting incl SIM detection works more often, but not always. Beside SIM problem operation is normal, no problems with WLAN, apps etc.
IMO it can't be a software bug since problem occures not generally. Before I'd send it in to Sony I wanted to ask the community if you have any ideas or recommendations?
Cheers!