[q] hd2 in bootloader mode after offcial rom upgrade - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi Masters ,,
I had HD2 stuck on HTC than i downloaded the official HTC ROM for HD2 from HTC.com and i put it on bootloader mode and started flashing it after 8% i got an error saying this application is not for your phone and i had downloaded using my S/N HT033NW05122 .( RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship )
Than my phone turned on witha black triangle and an X and straight into bootloader mode ...
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
Now i am confused how to revive my phone as i dont know if this phone has been jailbroken as in HArd SPL or not and when i use official Rom it refuses ...
PLEASE PLEASE PLEASE Help me out here
thanks
mike

Stock ROM 3.14 isn't compatible with HSPL; so first remove your HSPL.

flashing that rom from sd card should have removed hspl anyway, set spl 3.03.0000, rebooted and then given black screen with triangle.
Whats odd is the first line of bootloader, does it really only say
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
or did you miss a bit off?
Cos if so, then it sounds like a corrupted device ID, which some people have had before, though usually with corrupted characters before the HX-BC, so all flashing fails the ID check.

Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike

mun66 said:
Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike
Click to expand...
Click to collapse
sorry, ive never seen anyone with a corrupt ID get anything to flash, roms, radios, hspl, sd card, nothing.
But, get a 2gb or smaller card, format it FAT32,,,,, find a 1.4x or 1.6x or 1.7x stock rom for your phone, it MUST be the correct stock rom for your phone, download it, right click the .exe file choose extract here, it will extract several files, one file is RUU_Signed.nbh, copy that to the sd card, rename it leoimg.nbh, insert sd card, boot into bootloader, screen should go grey with blue writing.
If that doesnt work, you are stuck.

Thanks bro for your explaination .. can u give me a website where i can get this roms please ...
As i am new to this
thanks
Mike

htc website, or on here rom development section, leo official roms thread, first post first link.

RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.1 1U_2.15.50.14_LEO_S_Ship
I used the same firmware and flashed it with SD card as you explained me and now the HD2 is back again but the problem now remains the same as it initially was stuck on boot showing HTC in green and R 2.15.50.14 G 15.42.50.11U and D 3.14.04666
AND when i go to Bootloader Screen this is what it shows
PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20
So i guess HSPL is gone and now everything looks fine but phone not booting which was the initial problem
Please help
Thanks
Mike

not sure what further to suggest, but at least it is stock, so warranty is valid.

"PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20"
try loading a 1.66 rom first from SD card, and then load the 3.14 using PC, (might want to try another computer)

Related

[Q] HD2 Completely locked down

I have been searching and googling for over 2 hours straight and cant find any solution to my problem:
I was going to install the Custom HD2 Android. But my radio was to old. so I decided to update it with the newest rom.
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
So now I cant get passed a screen:
PB81100 HX-BC
SPL-3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x30
Upgrade ROM code error
Please try again
USB
I'm starting to believe there is nothing I can do.. Cant access my sd card when plugged to the pc or nothing..
Is there ANYTHING someone can help me with?
I believe your problem lies with SPL 3.03. I don't think even the latest HSPL will work. I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
juggs said:
I think what you have to do is flash an older stock ROM in order for your SPL to revert to 2.10. Then use HSPL3 to HSPL your device. Then you can flash any ROM you want.
Click to expand...
Click to collapse
won't work on none tmous phone because spl 3 won't let itself downgrade to spl1. just like spl2 wouldn't downgrade to 1.
the tmous users CAN downgrade from 3 to 2, but there are no spl2 roms for none tmous users.
@OP
if you have a tmous phone then flash a stock tmous rom from sd card.
if you have a normal hd2 then you are stuck on spl3 until hspl gets updated.
EDIT - my answer was incorrect, I was being wary until someone confirmed the spl CAN be downgraded by flashing a correct stock rom for your phone (USB is fine), or by using a goldcard.
Leffernan said:
I Installed the HSPL thingy, did the whole renaming and placement of LEOIMG.nbh
and tried to install it via bootloader. But it stopped at 9% telling me: "00028002 Not allowed"
Click to expand...
Click to collapse
you flashed the 3.x rom from sd card. the first thing an sd card flash does is remove hspl, and replace it with stock spl. next, the rom checks that the phone matches the rom, which in your case it doesn't, so it stops and fails.
you could try forcing an spl 2.08.0000 tmous rom on it using goldcard, in the hope it will then allow you to run hspl2.
But all of this requires me to have access to my sd card? I don't have that :\
ah ok.then its time to wait for the next hspl version to support spl3.x
Would it be too much to ask if you could send me a pm or a mail at [email protected] whenever that happens? Probably going back to a good old Sony Ericsson in the meantime, hehe
i'd like to say yes, but it could be several weeks, and i can barely remember to feed myself from one day to the next, so..... heh.
however When it does come out, it will be hard not to notice, just skim the latest thread titles every day or two.
edit - oh, and don't give up just yet, I could be mistaken, its not unusual!. i haven't touched the 3.x rom/spl yet, so i could be wrong.
this thread, for instance,
http://forum.xda-developers.com/showthread.php?t=814838
suggests that the spl CAN be downgraded. reports are still confused.
you could for instance try flashing the 3.x rom over usb using SSPL, and then you'd at least have a working phone.
EDIT - MY RESPONSES IN THIS THREAD WERE NOT BASED ON ALL THE INFORMATION WE NOW HAVE REGARDING SPL 3.03
THE 3.03 SPL CAN BE DOWNGRADED EASILY BY USING THE CORRECT STOCK ROM FOR YOUR PHONE, FLASHED EITHER USB OR SD CARD.

looking SPL 2.08 rom file can some one help me i brik my phone i need this rom

hi was trying to flash the phone so i first useHSPL software to hacked it after that i try to flash with RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
but it gose up to 8% AND STOP WHAT TO DO WHEN I TAKE BATTERY OUT AND PUT IT BACK I CAN SEE ON MY SAYING ROM ERORR SPL 2.08.HSPL
SPL 2.08 SO IM THINK I NEED 2.08 ROM ? CAN SOME ONE HELP ME OUT PLZ IM STUCK HERE
IT SAYING ON MY HD2
PB81100 HX-BC
SPL-2.08.hspl 8G XE
COTULLaHSPL 0x50
UPGRADE ROM CODE ERROR
PLEAS TRY AGAIN
if u want flash official rom ,remove HSPL.
extract rom,rename RUU_Singed.nbh to LEOIMG.nbh ,copy LEOIMG.nbh to SDCard.
(1)press volume down and hold,(2)press power button,flash rom.
sorry for my bad english.
salim5566 said:
hi was trying to flash the phone so i first useHSPL software to hacked it after that i try to flash with RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
but it gose up to 8% AND STOP WHAT TO DO WHEN I TAKE BATTERY OUT AND PUT IT BACK I CAN SEE ON MY SAYING ROM ERORR SPL 2.08.HSPL
SPL 2.08 SO IM THINK I NEED 2.08 ROM ? CAN SOME ONE HELP ME OUT PLZ IM STUCK HERE
IT SAYING ON MY HD2
PB81100 HX-BC
SPL-2.08.hspl 8G XE
COTULLaHSPL 0x50
UPGRADE ROM CODE ERROR
PLEAS TRY AGAIN
Click to expand...
Click to collapse
First of all, you haven't come close to bricking your phone.
Now for some questions:
What did your phone have on it prior to you flashing it?
Is it a branded phone (ie T-Mobile, vodafone, O2, etc) or an unbranded HTC HD2?
How did you get this 1.66WWE ROM - from HTC's website with your phone's serial number?
Why did you install HSPL?
The 1.66WWE Rom needs the 1.66 SPL (or 1.66 HSPL if you are using a branded phone).

Can't flash stock Rom from SD. Please help!

I know this same problem has been posted a thousand times, but I have tried everything and nothing is working. I formatted the SD (tried 2GB, 4GB & 16GB) to fat32, copied over the rom and changed the name to leoimg.nbh and then I put the card in the phone and when I turn it on it will flash "loading" for like 1/1000 of a second but then go to the the multi-colored screen with the word "serial" at the bottom and nothing happens. I've followed all the instructions to the "T" and I'm getting nothing. My spl is 2.10 and I believe I have hspl3. Can somebody please help me out?
Try removing hspl first then flash the stock rom btw is the stock rom 3.14
How do I remove hspl? Don't I have to flash from sd to do that?
I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
skletch said:
I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You removed HSPL
Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.
skletch said:
Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.
Click to expand...
Click to collapse
Well, make sure the stock ROM is installed!
If you've got the stock SPL on the phone, but you have a custom ROM loaded, I'm sure they'll know you HSPL'd.
Bro go for flashing... directly from pc..get a stock rom in shippedroms.com in the leo section..
Sent from my HTC HD2 using XDA App
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/attachment.php?attachmentid=291950&d=1268260144

help leo 1024

i tried applying a dual boot for android i used take29 after that i cant install any rom or stock rom its just has the bootloader and thats it i tried applying through hard reset and everything else i googled and download all kinds of imgs amd ruus and nothing it boot up to bootscreen and bootloader(the red blue green white screen) what can i do i'm not familiar with this os im more into android plz help if u can and thanks
PB81120 HX-B3 RUUNBH
SPL-3.03.000 XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X50
UPRAGE ROM CODE ERROR
PLEASE TRY AGAIN
SERIAL
You mention to have a leo 1024 = T-Mous device.!?
But on your bootloader we can see you have flashed a EU/Asian stock ROM.
This means you have install a incompatible SPL version, your device is stuck.
so what can i do i'm at a loss
thegod2012 said:
so what can i do i'm at a loss
Click to expand...
Click to collapse
Good question, HTC repair center will see this so there is no warranty.
So it will cost you to repair your device.
i've read something about a gold card is that an option
thegod2012 said:
i've read something about a gold card is that an option
Click to expand...
Click to collapse
No sir.
SPL = Second Program Loader is a boot loader after IPL (Initial Program Loader).
SPL is similar to a BIOS in a computer.
But you have used a wrong/not compatible for your device SPL version.
i guess its done for then sir thanks
thegod2012 said:
i guess its done for then sir thanks
Click to expand...
Click to collapse
Yes, unfortunately.

[Q] Bricked phone with SPL 3.03

It seems that my phone is bricked after I tried to flash a stock rom on it (3.14 something), which is obviously not for my phone because it is WWE. That failed flash left me with SPL 3.03 and now I can't flash anything else. Tried to Hard reset it with another stock rom from the sd card, but failed again. Any ideas how to fix it?
Hspl4, pick whatever spl you want.
or, use your serial to grab a rom from HTC website, into bootloader, flash it.
I tried using the usb flash aproach but it failed as well.
So I tried hard reseting with a stock rom on the sd card and I got this on the red green blue screen when after it failed.
pb81100 hx-bc
spl 3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
wrong stock rom. Only the CORRECT stock roms will work, hence using your serial number on eth htc website.
Thats the usual reason for this type of error, wrong stock rom from sd card.
I got my spl to 1.42 but it gives me error when I try to flash this rom from the official web site. RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
And none of the roms on the htc site accepts my S/N. Which rom should I get?
Where's the phone from? Its down to you to find out. Example, mines from o2, so I would try to download o2 roms cos wwe wouldn't work.
Course, the easy way is to use hspl4, and then flash any rom you like OVER USB.....SD will remove hspl and then fail, which is prob what happened to you in post 1
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
bqlkovich said:
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
Click to expand...
Click to collapse
Yes but flash HSPL first, I suggest you use HSPL 3.03 which is in HSPL 4.
Thanks guys, fixed it. Now I'll try installing Android on the SD card.

Categories

Resources