Can't flash stock Rom from SD. Please help! - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

I know this same problem has been posted a thousand times, but I have tried everything and nothing is working. I formatted the SD (tried 2GB, 4GB & 16GB) to fat32, copied over the rom and changed the name to leoimg.nbh and then I put the card in the phone and when I turn it on it will flash "loading" for like 1/1000 of a second but then go to the the multi-colored screen with the word "serial" at the bottom and nothing happens. I've followed all the instructions to the "T" and I'm getting nothing. My spl is 2.10 and I believe I have hspl3. Can somebody please help me out?

Try removing hspl first then flash the stock rom btw is the stock rom 3.14

How do I remove hspl? Don't I have to flash from sd to do that?

I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40

skletch said:
I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You removed HSPL

Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.

skletch said:
Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.
Click to expand...
Click to collapse
Well, make sure the stock ROM is installed!
If you've got the stock SPL on the phone, but you have a custom ROM loaded, I'm sure they'll know you HSPL'd.

Bro go for flashing... directly from pc..get a stock rom in shippedroms.com in the leo section..
Sent from my HTC HD2 using XDA App

i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/attachment.php?attachmentid=291950&d=1268260144

Related

[q] hd2 in bootloader mode after offcial rom upgrade

Hi Masters ,,
I had HD2 stuck on HTC than i downloaded the official HTC ROM for HD2 from HTC.com and i put it on bootloader mode and started flashing it after 8% i got an error saying this application is not for your phone and i had downloaded using my S/N HT033NW05122 .( RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship )
Than my phone turned on witha black triangle and an X and straight into bootloader mode ...
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
Now i am confused how to revive my phone as i dont know if this phone has been jailbroken as in HArd SPL or not and when i use official Rom it refuses ...
PLEASE PLEASE PLEASE Help me out here
thanks
mike
Stock ROM 3.14 isn't compatible with HSPL; so first remove your HSPL.
flashing that rom from sd card should have removed hspl anyway, set spl 3.03.0000, rebooted and then given black screen with triangle.
Whats odd is the first line of bootloader, does it really only say
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
or did you miss a bit off?
Cos if so, then it sounds like a corrupted device ID, which some people have had before, though usually with corrupted characters before the HX-BC, so all flashing fails the ID check.
Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike
mun66 said:
Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike
Click to expand...
Click to collapse
sorry, ive never seen anyone with a corrupt ID get anything to flash, roms, radios, hspl, sd card, nothing.
But, get a 2gb or smaller card, format it FAT32,,,,, find a 1.4x or 1.6x or 1.7x stock rom for your phone, it MUST be the correct stock rom for your phone, download it, right click the .exe file choose extract here, it will extract several files, one file is RUU_Signed.nbh, copy that to the sd card, rename it leoimg.nbh, insert sd card, boot into bootloader, screen should go grey with blue writing.
If that doesnt work, you are stuck.
Thanks bro for your explaination .. can u give me a website where i can get this roms please ...
As i am new to this
thanks
Mike
htc website, or on here rom development section, leo official roms thread, first post first link.
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.1 1U_2.15.50.14_LEO_S_Ship
I used the same firmware and flashed it with SD card as you explained me and now the HD2 is back again but the problem now remains the same as it initially was stuck on boot showing HTC in green and R 2.15.50.14 G 15.42.50.11U and D 3.14.04666
AND when i go to Bootloader Screen this is what it shows
PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20
So i guess HSPL is gone and now everything looks fine but phone not booting which was the initial problem
Please help
Thanks
Mike
not sure what further to suggest, but at least it is stock, so warranty is valid.
"PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20"
try loading a 1.66 rom first from SD card, and then load the 3.14 using PC, (might want to try another computer)

help leo 1024

i tried applying a dual boot for android i used take29 after that i cant install any rom or stock rom its just has the bootloader and thats it i tried applying through hard reset and everything else i googled and download all kinds of imgs amd ruus and nothing it boot up to bootscreen and bootloader(the red blue green white screen) what can i do i'm not familiar with this os im more into android plz help if u can and thanks
PB81120 HX-B3 RUUNBH
SPL-3.03.000 XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X50
UPRAGE ROM CODE ERROR
PLEASE TRY AGAIN
SERIAL
You mention to have a leo 1024 = T-Mous device.!?
But on your bootloader we can see you have flashed a EU/Asian stock ROM.
This means you have install a incompatible SPL version, your device is stuck.
so what can i do i'm at a loss
thegod2012 said:
so what can i do i'm at a loss
Click to expand...
Click to collapse
Good question, HTC repair center will see this so there is no warranty.
So it will cost you to repair your device.
i've read something about a gold card is that an option
thegod2012 said:
i've read something about a gold card is that an option
Click to expand...
Click to collapse
No sir.
SPL = Second Program Loader is a boot loader after IPL (Initial Program Loader).
SPL is similar to a BIOS in a computer.
But you have used a wrong/not compatible for your device SPL version.
i guess its done for then sir thanks
thegod2012 said:
i guess its done for then sir thanks
Click to expand...
Click to collapse
Yes, unfortunately.

[Q] HTC HD2 - Internet Problem - This connection is pre configured?

Hey,
I am in India. My friend has just given me a HTC HD2. I have performed a factory reset on it.
Now, when I try to open any website I get the below message.
"T-Mobile internet
This connection is pre-configured. It cannot be modified."
Please suggest how to overcome this. I have never faced such kind of problem in my earlier Windows 6 Mobile Phones.
I have googled it and found that I need to flash the ROM of the phone to enable other carriers data settings.
BUT, I am not sure which ROM to download and how to install it
Regards,
Ankur
ok first of all be VERY careful, sounds like it is a tmous (t mobile US)
does it have green send & red end keys?
if yes then you CANNOT flash ANY stock roms (except tmous), so do not try to change the language or region by flashing a different stock rom. you WILL kill it.
Apply hspl and find a tmous compatible cooked rom, or perhaps look into android.
If no, if the send and end keys are white, then you can simply apply HSPL and flash anything you like, which will most likely get rid of that stuck connection.
Thanks a ton for your time Sam. I really appreciate this.
It has white keys just like the in the attached pic.
I have installed HSPL on my device using this thread youtube video to install HSPL. I searched "How to install HSPL (HardSPL) to the HTC HD2 (Leo)" and tried it
Bootloader before HSPL
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
Bootloader after HSPL
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
Now, I need to Flash any ROM on it. I am not sure which on to use. Request you to please send me any link of any ROM which is suitable for my phone.
Although, I have downloaded 190 MB file -RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe. I am not sure if I can use it.
Thanks again for your help.
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
samsamuel said:
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
Click to expand...
Click to collapse
Hi Sam,
I tried on the HTC Europe site, when I am trying to download I am getting the error in the attached screenshot.
Can I download "Download Artemis 56.0 WWE (English)" from here ?
OR
this one given here.
Please suggest which one to go for, I am absolutely new to Flashing ROMs.
Also, can I Flash the new ROM using Microsoft Activesync, I saw the procedure in this youtube video and found it very easy.
I am extremely sorry if I am annoying you, but I have another small question. What if I mess up while flashing new ROM, will I be able to restore back to my Original Phone.
Thanks a lot again. You people are gems.
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
samsamuel said:
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
Click to expand...
Click to collapse
Great, I have flashed HSPL4 3.0.3.HSPL using this link
Now, I have this in my bootloader
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
As suggested, I will now download and try installing Artemis rom from here
Many thanks Sam,
I am a relieved man now. I have flashed Artemis ROM.
All is working well, now I am able to browse internet perfectly
I just found bug (I believe), when I try to increase volume "during call" , the phone hangs. Otherwise it works well.
Now, I am looking a "registry entry" to fix this.
Again, thanks you made my day.

[Q] Bricked phone with SPL 3.03

It seems that my phone is bricked after I tried to flash a stock rom on it (3.14 something), which is obviously not for my phone because it is WWE. That failed flash left me with SPL 3.03 and now I can't flash anything else. Tried to Hard reset it with another stock rom from the sd card, but failed again. Any ideas how to fix it?
Hspl4, pick whatever spl you want.
or, use your serial to grab a rom from HTC website, into bootloader, flash it.
I tried using the usb flash aproach but it failed as well.
So I tried hard reseting with a stock rom on the sd card and I got this on the red green blue screen when after it failed.
pb81100 hx-bc
spl 3.03.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x50
Upgrade ROM code error
wrong stock rom. Only the CORRECT stock roms will work, hence using your serial number on eth htc website.
Thats the usual reason for this type of error, wrong stock rom from sd card.
I got my spl to 1.42 but it gives me error when I try to flash this rom from the official web site. RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
And none of the roms on the htc site accepts my S/N. Which rom should I get?
Where's the phone from? Its down to you to find out. Example, mines from o2, so I would try to download o2 roms cos wwe wouldn't work.
Course, the easy way is to use hspl4, and then flash any rom you like OVER USB.....SD will remove hspl and then fail, which is prob what happened to you in post 1
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
bqlkovich said:
I think the phone is from Germany, because the packaging is in German. I used Energy rom before, so can I use it to flash via the usb cable ?
Click to expand...
Click to collapse
Yes but flash HSPL first, I suggest you use HSPL 3.03 which is in HSPL 4.
Thanks guys, fixed it. Now I'll try installing Android on the SD card.

[Q] Return Warranty T-Mobile USA

Hi guys, I'm exchanging my HD2 under warranty to Tmobile USA and wanted to know exactly what rom I need to flash back onto it to make sure they don't catch that I've flashed WP7, Android etc. Would it be the latest windows 6.5 update I should put back on it or the most updated one?
Thanks for everything, this website and forum has been quite the addiction for me.
Also if anybody would know the correct radio for it?
http://dl.htc.com/ruudownload/t-mobileUS/DeviceDownloads.aspx?pid=leo2
Radio is included in the flash. BUT if you flash from usb it will not remove hspl, so either do an sd car flash (sd card must be 4gb or smaller) or use hspl3 to set 2.08.0000 before you run the flash.
Thanks man!
Is this correct?
So now when I hold down volume button and power I see....
PB81120 SS-B3
SPL-2.08.HSPL 8G XE
0X05
CotullaHSPL 0X50
Is this correct? Would this be stock?
I flashed the official tmobile upgrade that you posted.
Just making sure I'm A OK to send the phone in and not void my warrenty....
Thank alot!
You flashed using USB and didn't follow the bit about removing hspl, so no, that would be returned to you unrepaired.
Run hspl3 and choose 2.08.0000 or 2.10.0000
Thanks man, I appreciate all your help. I'm running into a problem as windows wont open the hspl3 file (Im getting an error message) please advise.....
scratch that last post, had virus protection on, I uninstalled it and viola! so here's what I got's now......
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
And the sucker is now running the most updated software from the link you provided.
Would you now say I'm back to being 100% legit stock?
Thanks for everything brutha!
yea shouldnt have any problems now.
Thanks for everything man!
LONG LIVE XDA!

Categories

Resources