help leo 1024 - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

i tried applying a dual boot for android i used take29 after that i cant install any rom or stock rom its just has the bootloader and thats it i tried applying through hard reset and everything else i googled and download all kinds of imgs amd ruus and nothing it boot up to bootscreen and bootloader(the red blue green white screen) what can i do i'm not familiar with this os im more into android plz help if u can and thanks
PB81120 HX-B3 RUUNBH
SPL-3.03.000 XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X50
UPRAGE ROM CODE ERROR
PLEASE TRY AGAIN
SERIAL

You mention to have a leo 1024 = T-Mous device.!?
But on your bootloader we can see you have flashed a EU/Asian stock ROM.
This means you have install a incompatible SPL version, your device is stuck.

so what can i do i'm at a loss

thegod2012 said:
so what can i do i'm at a loss
Click to expand...
Click to collapse
Good question, HTC repair center will see this so there is no warranty.
So it will cost you to repair your device.

i've read something about a gold card is that an option

thegod2012 said:
i've read something about a gold card is that an option
Click to expand...
Click to collapse
No sir.
SPL = Second Program Loader is a boot loader after IPL (Initial Program Loader).
SPL is similar to a BIOS in a computer.
But you have used a wrong/not compatible for your device SPL version.

i guess its done for then sir thanks

thegod2012 said:
i guess its done for then sir thanks
Click to expand...
Click to collapse
Yes, unfortunately.

Related

I cant flash ROMs anymore ?

Hi !
I cant flash ROMs anymore? it never starts it's only on 0%, what could have happening?
Ps. excuse me for bad English and if i put this post at wrong place, couldn't find any post like this
have you flashed a stock rom from sd card recently? that would remove hspl and prevent further flashing
boot to bootloader, what does it say next to spl?
samsamuel said:
have you flashed a stock rom from sd card recently? That would remove hspl and prevent further flashing
boot to bootloader, what does it say next to spl?
Click to expand...
Click to collapse
PB81100 HX-BC
spl-1,42,0000 XE
MicroP(led) 0x05
MicroP(Touch) 0x40
HubbaBubba123 said:
spl-1,42,0000 xe
Click to expand...
Click to collapse
no hspl installed, no wonder you cant flash then eh?
samsamuel said:
no hspl installed, no wonder you cant flash then eh?
Click to expand...
Click to collapse
DarkForces Team HardSPL by bepe and Cotulla, I have that one installed, isen't that the right one ?
when u success doing hspl there should be written x.xx.HSPL
try doing hspl again...
HubbaBubba123 said:
DarkForces Team HardSPL by bepe and Cotulla, I have that one installed, isen't that the right one ?
Click to expand...
Click to collapse
negawolf said:
when u success doing hspl there should be written x.xx.HSPL
try doing hspl again...
Click to expand...
Click to collapse
as negaworlf said, the spl code would be x.xx.HSPL and not x.xx.0000.
Use hspl2 and from teh dropdown use one that ends '.hspl' (Doesnt matter which you use, so long as it ends .hspl)
samsamuel said:
as negaworlf said, the spl code would be x.xx.HSPL and not x.xx.0000.
Use hspl2 and from teh dropdown use one that ends '.hspl' (Doesnt matter which you use, so long as it ends .hspl)
Click to expand...
Click to collapse
Thanks it's working now!
I have android now and maybe you could just answer one more question, when someone call me or send me a sms or on youtube it's only vibrating, and i have tried to fix it in settings but cant find the problem. Does anybody know what's wrong ?

[q] hd2 in bootloader mode after offcial rom upgrade

Hi Masters ,,
I had HD2 stuck on HTC than i downloaded the official HTC ROM for HD2 from HTC.com and i put it on bootloader mode and started flashing it after 8% i got an error saying this application is not for your phone and i had downloaded using my S/N HT033NW05122 .( RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.11U_2.15.50.14_LEO_S_Ship )
Than my phone turned on witha black triangle and an X and straight into bootloader mode ...
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
Now i am confused how to revive my phone as i dont know if this phone has been jailbroken as in HArd SPL or not and when i use official Rom it refuses ...
PLEASE PLEASE PLEASE Help me out here
thanks
mike
Stock ROM 3.14 isn't compatible with HSPL; so first remove your HSPL.
flashing that rom from sd card should have removed hspl anyway, set spl 3.03.0000, rebooted and then given black screen with triangle.
Whats odd is the first line of bootloader, does it really only say
HX-BC
SPL-1.42.HSPL XE
(blank space) 0x05
CotullaHSPL 0x20
or did you miss a bit off?
Cos if so, then it sounds like a corrupted device ID, which some people have had before, though usually with corrupted characters before the HX-BC, so all flashing fails the ID check.
Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike
mun66 said:
Yes it only says like that .. before flashing it was ok but now it is corrupted ... How do i flash this with SD card ... just put it in Sd card and and boot it in bootloader mode ?
, Also how do i remover HSPL ? please explain
And if i want to flash a firmware with HSPL is it possible and if possible which firmware and how ?
thanks
Mike
Click to expand...
Click to collapse
sorry, ive never seen anyone with a corrupt ID get anything to flash, roms, radios, hspl, sd card, nothing.
But, get a 2gb or smaller card, format it FAT32,,,,, find a 1.4x or 1.6x or 1.7x stock rom for your phone, it MUST be the correct stock rom for your phone, download it, right click the .exe file choose extract here, it will extract several files, one file is RUU_Signed.nbh, copy that to the sd card, rename it leoimg.nbh, insert sd card, boot into bootloader, screen should go grey with blue writing.
If that doesnt work, you are stuck.
Thanks bro for your explaination .. can u give me a website where i can get this roms please ...
As i am new to this
thanks
Mike
htc website, or on here rom development section, leo official roms thread, first post first link.
RUU_Leo_S_hTC_Asia_WWE_3.14.707.3_Radio_15.42.50.1 1U_2.15.50.14_LEO_S_Ship
I used the same firmware and flashed it with SD card as you explained me and now the HD2 is back again but the problem now remains the same as it initially was stuck on boot showing HTC in green and R 2.15.50.14 G 15.42.50.11U and D 3.14.04666
AND when i go to Bootloader Screen this is what it shows
PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20
So i guess HSPL is gone and now everything looks fine but phone not booting which was the initial problem
Please help
Thanks
Mike
not sure what further to suggest, but at least it is stock, so warranty is valid.
"PB81100 HX-BC
SPL-3.0.3.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x20"
try loading a 1.66 rom first from SD card, and then load the 3.14 using PC, (might want to try another computer)

Can't flash stock Rom from SD. Please help!

I know this same problem has been posted a thousand times, but I have tried everything and nothing is working. I formatted the SD (tried 2GB, 4GB & 16GB) to fat32, copied over the rom and changed the name to leoimg.nbh and then I put the card in the phone and when I turn it on it will flash "loading" for like 1/1000 of a second but then go to the the multi-colored screen with the word "serial" at the bottom and nothing happens. I've followed all the instructions to the "T" and I'm getting nothing. My spl is 2.10 and I believe I have hspl3. Can somebody please help me out?
Try removing hspl first then flash the stock rom btw is the stock rom 3.14
How do I remove hspl? Don't I have to flash from sd to do that?
I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
skletch said:
I think I might have done it by following some tutorial, but I'm not sure. How do I know if hspl is removed? This is what my screen reads from bootload:
PB81120 HX-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
You removed HSPL
Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.
skletch said:
Great! So now that I've done that I can send my phone back in for a new one right, without concerns of a voided warranty? I encountered the dreaded dead touchscreen.
Click to expand...
Click to collapse
Well, make sure the stock ROM is installed!
If you've got the stock SPL on the phone, but you have a custom ROM loaded, I'm sure they'll know you HSPL'd.
Bro go for flashing... directly from pc..get a stock rom in shippedroms.com in the leo section..
Sent from my HTC HD2 using XDA App
i had similar issues, i used task29 that contains blank .nbh. you must have hspl 2.08 first to run this then install any custom ROM through PC or your branded ROM through SD card it should work. i hope this helps.
here you go
http://forum.xda-developers.com/attachment.php?attachmentid=291950&d=1268260144

[Q] Radio 2.05.51.05_2 cannot be updated!!!

Hi my Friends.
I cannot update my radio!!!!I have 2.05.51.05_2 and, although I followed all the steps trhough HSPL, after I have tried to setup the new radio 2.15 ecc, the device cancels all the data like a new set up of the same Artemis ROM but the radio is always the same. How can i do?
Please, help me!!!!
Officer78 said:
Hi my Friends.
I cannot update my radio!!!!I have 2.05.51.05_2 and, although I followed all the steps trhough HSPL, after I have tried to setup the new radio 2.15 ecc, the device cancels all the data like a new set up of the same Artemis ROM but the radio is always the same. How can i do?
Please, help me!!!!
Click to expand...
Click to collapse
Did you install HSPL correctly?
Go to Boot-louder;
- shutdown your device
- hold volume down button pres
- pres shortly on power button
- now you will have a 4 color screen.
Give us the information that you see on the boot-louder screen.
Hi, thanks for your help.
So:
PB81100 SS-BC
SPL-1.42.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
Do I have to do something?
Thanks
Officer78 said:
Hi, thanks for your help.
So:
PB81100 SS-BC
SPL-1.42.0000 XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X50
Do I have to do something?
Thanks
Click to expand...
Click to collapse
Like you can see your device have for the moment SPL 1.42 instead of HSPL (the one you need to be able to install a Radio)
So next step to do is installing HSPL 1.66 use this application > HSPL2_RUN.exe
More information on how to use it; link
Thanks a lot!!!!!!!
Finally it works...
Officer78 said:
Thanks a lot!!!!!!!
Finally it works...
Click to expand...
Click to collapse
You're welcome.
hi fd,
I cannot update my radio I have 2.05.51.05_2
i try to update radio 2.12.... cannot move still 0% error msg - update error [262]
please help me, i need install android
My SPL - 2.08.0000 8G XE
MicroP(LED) 0X05
MicroP(TOUCH) 0X30
PB81100 HX-BC
You need to install HSPL first, follow the instructions in the videos Kurt posted above.
Need help!
Same problem, with the Radio ROM 2.05.51.05_2 ... I've hacket my 1.42.000 SPL with HSPL 2.08. It worked, but I can't make the Radio ROM update.
My question: Can I go from HSPL 2.08 directly to HSPL 1.66 using the HSPL2, or I need to go back to 1.42.000 ?
nisthor said:
Need help!
Same problem, with the Radio ROM 2.05.51.05_2 ... I've hacket my 1.42.000 SPL with HSPL 2.08. It worked, but I can't make the Radio ROM update.
My question: Can I go from HSPL 2.08 directly to HSPL 1.66 using the HSPL2, or I need to go back to 1.42.000 ?
Click to expand...
Click to collapse
Yes you can.
But it depends on the ROM you want to use which (H)SPL version you have to install.
Noop, I can't go from 2.08.HSPL to 1.66 HSPL using HSPL2. It says:
"Critical error
Flow: 00000003
Error code: 00000004
Description: BAD model ID!"
First, my device had 1.42.0000 SPL. I've changed that to 2.08.HSPL and I can't make the Radio ROM update from 2.05.51.05_2 to the version i need for installing android (2.15.50.14). What can I do?
So, on my device I had 1.42.0000 SPL and Radio ROM 2.05.51.05_2. I've gone from 1.42.0000 SPL to "SPL-2.08.HSPL 8G XE" (CotullaHSPL) and I can't update my Radio ROM from 2.05.51.05_2 to that used to prepare installation for android (2.15.50.14). How can I get from SPL-2.08.HSPL to 1.66.HSPL, to let me update the Radio ROM.
Bad model id
Click to expand...
Click to collapse
Look in bootloader, what does the top line say?
" pb81*** hx-bc
spl-2.08.hspl 8g xe "
What is the secret of the three digits you used a placeholder for?
Have you tried to change HSPL version while your HD2 was on boot screen?
Which HSPL program according to this thread have you used to install HSPL2.08?
Last time I changed RADIO manually I was on HSPL1.66, I think it might has been in August last year.
I installed also HSPL2.08 for tests by using HSPL2_RUN.exe but because of system instabilities I switched back to SPL1.66 by using the same program without any problems.
My bad, I've used HSPL4 (in fact, the easyandroid I have uses HSPL4).
So, can I use HSPL4 to go from HSPL2.08 to SPL1.66 ( on my device orriginaly was SPL1.42.0000 )? Or, I need to go back to SPL1.42.000 using HSPL4 and then use HSPL2 to go to SPL1.66.0000 and HSPL1.66... the one I need to update my Radio ROM 2.05.51.05_2 to version 2.15.50.14 ?
With HSPL4 you can only choose between 2.08 and 3.03.
I'm using SPL3.03 from STOCK ROM 3.14 and never tried to switch back to (H)SPL2.08 or (H)SPL1.66, sorry.
If HSPL2.08 is installed correctly, you should be able to flash a new RADIO.
Have you tried LeoAdvancedRUU (option 2 Task 32) for flashing new RADIO while your HD2 was on bootloader screen?
I'll try it... Thanks!
Will return with answers.
" pb81*** hx-bc
spl-2.08.hspl 8g xe "
there's no secret for the placeholders.... that is how my device shows me in bootloader mode. I don't know why.
Meanwhile, I've tried the LeoAdvancedRUU and it happened like in Pic1 and Pic2.
http://imageshack.us/photo/my-images/27/pic1ju.png/
http://imageshack.us/photo/my-images/28/pic2v.png/
At Pic2, I've realised that there is no version of my Radio ROM device written in the field "Image Version:". Sooo, I've clicked Cancel. I don't know what to do, should I go on? I don't want to brick my device.
There was Pic3 stage, but that's no problem. After that I don't know what to do.
http://imageshack.us/photo/my-images/202/pic3qc.png/
I've never seen this in any of the site's posts. Why didn't it show my version in the "Image Version" field?

[Q] HTC HD2 - Internet Problem - This connection is pre configured?

Hey,
I am in India. My friend has just given me a HTC HD2. I have performed a factory reset on it.
Now, when I try to open any website I get the below message.
"T-Mobile internet
This connection is pre-configured. It cannot be modified."
Please suggest how to overcome this. I have never faced such kind of problem in my earlier Windows 6 Mobile Phones.
I have googled it and found that I need to flash the ROM of the phone to enable other carriers data settings.
BUT, I am not sure which ROM to download and how to install it
Regards,
Ankur
ok first of all be VERY careful, sounds like it is a tmous (t mobile US)
does it have green send & red end keys?
if yes then you CANNOT flash ANY stock roms (except tmous), so do not try to change the language or region by flashing a different stock rom. you WILL kill it.
Apply hspl and find a tmous compatible cooked rom, or perhaps look into android.
If no, if the send and end keys are white, then you can simply apply HSPL and flash anything you like, which will most likely get rid of that stuck connection.
Thanks a ton for your time Sam. I really appreciate this.
It has white keys just like the in the attached pic.
I have installed HSPL on my device using this thread youtube video to install HSPL. I searched "How to install HSPL (HardSPL) to the HTC HD2 (Leo)" and tried it
Bootloader before HSPL
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
Bootloader after HSPL
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
Now, I need to Flash any ROM on it. I am not sure which on to use. Request you to please send me any link of any ROM which is suitable for my phone.
Although, I have downloaded 190 MB file -RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe. I am not sure if I can use it.
Thanks again for your help.
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
samsamuel said:
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
Click to expand...
Click to collapse
Hi Sam,
I tried on the HTC Europe site, when I am trying to download I am getting the error in the attached screenshot.
Can I download "Download Artemis 56.0 WWE (English)" from here ?
OR
this one given here.
Please suggest which one to go for, I am absolutely new to Flashing ROMs.
Also, can I Flash the new ROM using Microsoft Activesync, I saw the procedure in this youtube video and found it very easy.
I am extremely sorry if I am annoying you, but I have another small question. What if I mess up while flashing new ROM, will I be able to restore back to my Original Phone.
Thanks a lot again. You people are gems.
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
samsamuel said:
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
Click to expand...
Click to collapse
Great, I have flashed HSPL4 3.0.3.HSPL using this link
Now, I have this in my bootloader
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
As suggested, I will now download and try installing Artemis rom from here
Many thanks Sam,
I am a relieved man now. I have flashed Artemis ROM.
All is working well, now I am able to browse internet perfectly
I just found bug (I believe), when I try to increase volume "during call" , the phone hangs. Otherwise it works well.
Now, I am looking a "registry entry" to fix this.
Again, thanks you made my day.

Categories

Resources