I cant flash ROMs anymore ? - HD2 Windows Mobile 6.5 Q&A, Help & Troubleshooting

Hi !
I cant flash ROMs anymore? it never starts it's only on 0%, what could have happening?
Ps. excuse me for bad English and if i put this post at wrong place, couldn't find any post like this

have you flashed a stock rom from sd card recently? that would remove hspl and prevent further flashing
boot to bootloader, what does it say next to spl?

samsamuel said:
have you flashed a stock rom from sd card recently? That would remove hspl and prevent further flashing
boot to bootloader, what does it say next to spl?
Click to expand...
Click to collapse
PB81100 HX-BC
spl-1,42,0000 XE
MicroP(led) 0x05
MicroP(Touch) 0x40

HubbaBubba123 said:
spl-1,42,0000 xe
Click to expand...
Click to collapse
no hspl installed, no wonder you cant flash then eh?

samsamuel said:
no hspl installed, no wonder you cant flash then eh?
Click to expand...
Click to collapse
DarkForces Team HardSPL by bepe and Cotulla, I have that one installed, isen't that the right one ?

when u success doing hspl there should be written x.xx.HSPL
try doing hspl again...

HubbaBubba123 said:
DarkForces Team HardSPL by bepe and Cotulla, I have that one installed, isen't that the right one ?
Click to expand...
Click to collapse
negawolf said:
when u success doing hspl there should be written x.xx.HSPL
try doing hspl again...
Click to expand...
Click to collapse
as negaworlf said, the spl code would be x.xx.HSPL and not x.xx.0000.
Use hspl2 and from teh dropdown use one that ends '.hspl' (Doesnt matter which you use, so long as it ends .hspl)

samsamuel said:
as negaworlf said, the spl code would be x.xx.HSPL and not x.xx.0000.
Use hspl2 and from teh dropdown use one that ends '.hspl' (Doesnt matter which you use, so long as it ends .hspl)
Click to expand...
Click to collapse
Thanks it's working now!
I have android now and maybe you could just answer one more question, when someone call me or send me a sms or on youtube it's only vibrating, and i have tried to fix it in settings but cant find the problem. Does anybody know what's wrong ?

Related

[Q] cant install magldr 1.12

hey everybody, i have a problem with the istallation of the magldr.
i go into the bootmanager ( this red-green-blue colored screen) and then i run the romupdate.exe, the black htc logo appears and the progressbar stuck at 0% for about 10 minutes, then i get an error on the pc and the programm starts the recovery tips
anybody who can help me?
before i had :
-magldr 1.11
-mdj gingerbread 2.0
-16gb sd card by SanDisk
-german hd2 ( bougt at vodafone)
i have simular problems. I can install ot, but when i hold down power button nothing happend.
i have: flashed stock rom
flashed newest radio 2.15.50.14
then flashed magldr 1.12
then im stuck any one knows?
I had the same issue. Make sure you are using HSPL 2.08.HSPL and not 2.08.0000.
I have 266 connection error... doing same as described
Have you started ROMUpdateUtility.exe as Administrator ?
uxu said:
Have you started ROMUpdateUtility.exe as Administrator ?
Click to expand...
Click to collapse
I already administrator on PC (Windows XP)
abhavananda said:
I had the same issue. Make sure you are using HSPL 2.08.HSPL and not 2.08.0000.
Click to expand...
Click to collapse
where do i get the version without the .0000 in the end?
thx, i hope this will help, will try it when i find the download =)
edit: aaaaah, got it, will try it now ^^
thx, it worked
im using hspl 1.42, your saying thats the problem?
Nakazul: maybe this helps you?
I had 1.42.HSPL before I flashed magldr, too.
So what I did to get 2.08.HSPL was:
1. flash the second latest stock-rom (not latest because latest is too new) by putting leoimg.nbh on the sd card, then boot and flash from SD with bootloader (to get rid of 1.42.HSPL ad get back to 1.42.000)
2. flash HSPL, where I was able to flash to 2.08.HSPL
3. flash MAGLDR 1.11
and everything works.
I'm lucky, i have SPL-3.03.0000 ...
... and, of course, magldr 1.12 don't work (0%) and HSPL3 is only for 2.xx
Someone have some idea ...?
Thanks
Capppo said:
... and, of course, magldr 1.12 don't work (0%) and HSPL3 is only for 2.xx
Someone have some idea ...?
Thanks
Click to expand...
Click to collapse
just flash the second latest official rom for your leo then you will be able to install HSPL.
cant install magldr 1.12
the SPL version on my Hd2 is 1.66.0000 XE
it tried to install HSPL2 but it says
Critical error
Flow: 00000003
Error Code:00000004
Description: Bad model ID.
What should i do.
Please help me anyone.
kiki1987 said:
the SPL version on my Hd2 is 1.66.0000 XE
it tried to install HSPL2 but it says
Critical error
Flow: 00000003
Error Code:00000004
Description: Bad model ID.
What should i do.
Please help me anyone.
Click to expand...
Click to collapse
HSPL3: http://forum.xda-developers.com/showpost.php?p=6891358&postcount=1893
Hopefully that will solve your issue.

help leo 1024

i tried applying a dual boot for android i used take29 after that i cant install any rom or stock rom its just has the bootloader and thats it i tried applying through hard reset and everything else i googled and download all kinds of imgs amd ruus and nothing it boot up to bootscreen and bootloader(the red blue green white screen) what can i do i'm not familiar with this os im more into android plz help if u can and thanks
PB81120 HX-B3 RUUNBH
SPL-3.03.000 XE
MICROP (LED) 0X05
MICROP(TOUCH) 0X50
UPRAGE ROM CODE ERROR
PLEASE TRY AGAIN
SERIAL
You mention to have a leo 1024 = T-Mous device.!?
But on your bootloader we can see you have flashed a EU/Asian stock ROM.
This means you have install a incompatible SPL version, your device is stuck.
so what can i do i'm at a loss
thegod2012 said:
so what can i do i'm at a loss
Click to expand...
Click to collapse
Good question, HTC repair center will see this so there is no warranty.
So it will cost you to repair your device.
i've read something about a gold card is that an option
thegod2012 said:
i've read something about a gold card is that an option
Click to expand...
Click to collapse
No sir.
SPL = Second Program Loader is a boot loader after IPL (Initial Program Loader).
SPL is similar to a BIOS in a computer.
But you have used a wrong/not compatible for your device SPL version.
i guess its done for then sir thanks
thegod2012 said:
i guess its done for then sir thanks
Click to expand...
Click to collapse
Yes, unfortunately.

[Q] Need help flashing and SPL

im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
jackbeveridge said:
im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
Click to expand...
Click to collapse
You have alot of reading to do so start here
http://forum.xda-developers.com/showthread.php?t=611433
jackbeveridge said:
in bootloader it only says spl so i guess it doesnt.
Click to expand...
Click to collapse
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
thanks in advance !!
Click to expand...
Click to collapse
sounds like no hspl installed.
samsamuel said:
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
sounds like no hspl installed.
Click to expand...
Click to collapse
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
jackbeveridge said:
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
Click to expand...
Click to collapse
If What you mean with the"original rom" is " stock rom", you don't need any HSPL. Just flash it via active sync or micro sd
like silverwind said, if you are just using any old stock rom, not your correct stock rom for your serial number, then you need hspl, just like cooked roms, if you have the correct one, you dont.

[Q] HTC HD2 - Internet Problem - This connection is pre configured?

Hey,
I am in India. My friend has just given me a HTC HD2. I have performed a factory reset on it.
Now, when I try to open any website I get the below message.
"T-Mobile internet
This connection is pre-configured. It cannot be modified."
Please suggest how to overcome this. I have never faced such kind of problem in my earlier Windows 6 Mobile Phones.
I have googled it and found that I need to flash the ROM of the phone to enable other carriers data settings.
BUT, I am not sure which ROM to download and how to install it
Regards,
Ankur
ok first of all be VERY careful, sounds like it is a tmous (t mobile US)
does it have green send & red end keys?
if yes then you CANNOT flash ANY stock roms (except tmous), so do not try to change the language or region by flashing a different stock rom. you WILL kill it.
Apply hspl and find a tmous compatible cooked rom, or perhaps look into android.
If no, if the send and end keys are white, then you can simply apply HSPL and flash anything you like, which will most likely get rid of that stuck connection.
Thanks a ton for your time Sam. I really appreciate this.
It has white keys just like the in the attached pic.
I have installed HSPL on my device using this thread youtube video to install HSPL. I searched "How to install HSPL (HardSPL) to the HTC HD2 (Leo)" and tried it
Bootloader before HSPL
PB81100 HX-BC
SPL-1.42.0000 XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
Click to expand...
Click to collapse
Bootloader after HSPL
PB81100 HX-BC
SPL-1.42.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
Now, I need to Flash any ROM on it. I am not sure which on to use. Request you to please send me any link of any ROM which is suitable for my phone.
Although, I have downloaded 190 MB file -RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe. I am not sure if I can use it.
Thanks again for your help.
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
samsamuel said:
Ahh. Then you have a regular hd2 and there is much less danger.
You can take your pick. The rom you mentioned is old. 3.14 is the latest.
Click to expand...
Click to collapse
Hi Sam,
I tried on the HTC Europe site, when I am trying to download I am getting the error in the attached screenshot.
Can I download "Download Artemis 56.0 WWE (English)" from here ?
OR
this one given here.
Please suggest which one to go for, I am absolutely new to Flashing ROMs.
Also, can I Flash the new ROM using Microsoft Activesync, I saw the procedure in this youtube video and found it very easy.
I am extremely sorry if I am annoying you, but I have another small question. What if I mess up while flashing new ROM, will I be able to restore back to my Original Phone.
Thanks a lot again. You people are gems.
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
samsamuel said:
you can flash any of those roms. dont get confused by the words 'activesync', , , the best way to flash is to put teh phone uin bootlaoder yourself first, THEN run the flash over usb. activesync will not look like it is connected, but dont worry.
Yes, sure, go for the artemis rom. you need 3.03.hspl for that rom, so
hspl4 - 3.03.hspl - flash the rom.
or, since you already have spl 3.03.0000, you can avoid hspl and use sspl to flash the artemis rom.
Click to expand...
Click to collapse
Great, I have flashed HSPL4 3.0.3.HSPL using this link
Now, I have this in my bootloader
PB81100 HX-BC
SPL-3.03.HSPL XE
0x05
CotullaHSPL 0x40
Click to expand...
Click to collapse
As suggested, I will now download and try installing Artemis rom from here
Many thanks Sam,
I am a relieved man now. I have flashed Artemis ROM.
All is working well, now I am able to browse internet perfectly
I just found bug (I believe), when I try to increase volume "during call" , the phone hangs. Otherwise it works well.
Now, I am looking a "registry entry" to fix this.
Again, thanks you made my day.

bricked device,please help.

Hello everybody so my story is simple i was trying to install mango on my htc hd2 but after i decide to come back to 6.5 again,but after downgrade i cant boot my phone it just start up and ceep rebooting all the time... any solution for that? i post my bootloader foto so can someone tell me wich ruu is correct for my phone i try few deferent one but all of them give me 262 error. Im nob with this htc, can someone help me? Im happy to donate person who solve my problem....
Sent from my GT-I9100 using xda premium
Bent battery pin? Check carefully
Also, your spl (2.08.0000) is only stock for tmous hd2, not regular,, what did you flash? Full details and step by step list of your actions please.
no answer
samsamuel said:
Bent battery pin? Check carefully
Also, your spl (2.08.0000) is only stock for tmous hd2, not regular,, what did you flash? Full details and step by step list of your actions please.
Click to expand...
Click to collapse
i cant tell anything because my friend do it with me, but he download everything, but he is on holiday now so im no abble to say anythink.... ccan u provide me link to correct ruu??
Ps. battery pin r ok and battery is charged.
"Correct ruu ' depends on the network you got the phone from and if they rom locked it and also the region, so for example an o2 UK phone requires an o2 UK rom UNLESS it came from o2s second batch of hd2s which were rom unlocked but region locked so they use wwe unbranded roms. My point being that it's not as simple as me saying "that one"
However, you could ......
Use hspl4 to apply 3.03.hspl
Flash any 3.14 rom over USB
Re run hspl4 select 3.03.0000
ok,so i flash hspl succesfully like u ask me to do, but when i try to install ruu i get error message all the time, i dont know wich ryuu is correct for my htc. i biught it on ebay unlocked...
Sent from my GT-I9100 using xda premium
What does spl line say In bootloader?
If hspl is really installed, it doesn't matter what ruu you use, that's the point of hspl
spl line
samsamuel said:
What does spl line say In bootloader?
If hspl is really installed, it doesn't matter what ruu you use, that's the point of hspl
Click to expand...
Click to collapse
the spl line say: SPL-3.03.0000 XE
So that's not hspl then, , , if it ends 0000 its a stock spl.
Proves the pointlesness of non specific statements like " I flashed hspl successfully ", , , no you didn't, you USED the hspl program to successfully set the STOCK spl of 3.03.0000
into bootloader
re-run hspl4
choose 3.03.hspl NOT 3.03.0000 and you'll be good to go.

Categories

Resources