im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
jackbeveridge said:
im having problems switching from an energy rom to the normal stock rom. i am unsure if i have hspl installed, in bootloader it only says spl so i guess it doesnt.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
any help would be greatly appreciated. i am a complete noob with phones and computers.
thanks in advance !!
Click to expand...
Click to collapse
You have alot of reading to do so start here
http://forum.xda-developers.com/showthread.php?t=611433
jackbeveridge said:
in bootloader it only says spl so i guess it doesnt.
Click to expand...
Click to collapse
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
whenever i try to change it from the energy rom to the original the loading bar stays on 0% and then after about 5 minutes comes up with an 'update error 262'
thanks in advance !!
Click to expand...
Click to collapse
sounds like no hspl installed.
samsamuel said:
look at the numbers to the right of 'spl', , something like x.xx.xxxx
its the last 4 digits that tell you if its spl or hspl. if its .0000 its a stock spl, if its .hspl, , , , ,you guessed it.
sounds like no hspl installed.
Click to expand...
Click to collapse
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
jackbeveridge said:
ah right i think i get it... basically hspl 2 enables you install spl or hspl. i think that i may of installed an spl by mistake. so if i install hspl i should be able to go back to an original rom ? thanks
Click to expand...
Click to collapse
If What you mean with the"original rom" is " stock rom", you don't need any HSPL. Just flash it via active sync or micro sd
like silverwind said, if you are just using any old stock rom, not your correct stock rom for your serial number, then you need hspl, just like cooked roms, if you have the correct one, you dont.
Related
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
JUST TRIED TASK29..afte 4% stopped with messege not allowed
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
try to flash earlier official rom e.g 1.66 rom not from sd card but with the pc
hagba said:
Welcome to the dark side,I did the same thing,I followed someones advice and flashed the official 3.14 from the SD card,now I am stuck at the bootloader with SPL 3.03.
Lots of peaople here have become bummers asking for a new HSPL but the smart guys seem to be turning a deaf ear.
Click to expand...
Click to collapse
Holy h*t...
Are you freaking crazy?
You MUST NOT flash a original ROM from SD card... That will overwrite the hardspl...
If you guys follow the RTFM tradition before do something you don't understand, then that would not happen...
Now you have to wait until a new hardspl is released...
Maybe you should do a task 28/29 and flash 3.14 with RUU.
Before you guys do another stupid thing... Don't try a "task 2a".
Maybe it don't brick your device, but it also will not help.
coneman23 said:
here is the thing from the start.
a friend of mine bought a HD2 from hong-kong.
after installing a cab file for hebrew support the device wont go up.
hard reset to the device didnt help.
so i thought i should hspl the device and then flash the new nrg rom.
after i did hspl from version 1.66 i made a ROM FLASH BEFORE RADIO FLASH.
anyways the NRG system refused to go up then i made radio upadte and tried flash again to NRG rom but the flash keep stucking in the middle every time.
i got stucked with the error cable code in bootloader menu.
flashed from sd the newest ROM 3.14.405.2 still nothing changed still with error and now without the HSPL.
is there anything else i missed?
Click to expand...
Click to collapse
maybe try SSPL
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
artiik said:
Hi
ive had similar problem (stuck with hspl 3.03) and flashing official leoimg from sd card worked for me so it is worth trying.
Regards
Click to expand...
Click to collapse
Why you freaking guys flash an official ROM from SD-Card?
tired that all
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
coneman23 said:
i couldnt get offical flash..
keep getting not allowed messege on the screen.
the thing is that the 3.03 update wasnt successul either and stopped at 44%
Click to expand...
Click to collapse
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Crusoe86 said:
Did you try to flash the HD2 with 3.14 ROM (with the RUU)?
Click to expand...
Click to collapse
yes i have from sd and from usb..getting 28002 not allowed.
tried mtty42.1 task 29 and task 28 55aa
still no hope.
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Crusoe86 said:
What should task 55aa do? In my opinin it should flash everthing except the radio. Right?
What kind of HD2 sells HK? Is it an ordinary 512MB one?
Is this an original HTC? I know the chinese people does not like originals, they like to sell their own not working but nearly original looking phones...
Look at this Touch Diamond
What happens if you install the latest HSPL (2.08)?
Is it possible to flash a new SPL (does not matter if original or not)
What kind of Radio do you have actual on your Phone?
Many regards
Click to expand...
Click to collapse
it is the orginal,he bought the phone with the wwe_asia 1.66 rom with english and chinese.
as i said tried to flash to 1.66 and again with new 3.16. but still getting not allowed.
task 28 55aa should format the device but some say its working only in case of hspl.
and since my phonw now got the 3.03 spl i guess its not possible.
correct me if im wrong but my only optios seems to be jtag which cost here in some labs about 150$...
Oh my god... What shoudl I do with you?...
I don't want to brick my HD2 to try something for you...
But... Did you know something about a "Goldcard" method?
If not I will help you to create one. On other phones the Goldcard allows to flash ROMs from another Provider... For example you have a Vodafone ROM and want a Stock HTC ROM... Normally this should not work. With a Goldcard it does...
Maybe you have an old microSD Card which we can use?!
Maybe we can also try to flash it with SSPL. Did you try this, too?
I never used SSPL, maybe it did not work in Bootloder mode, but we will se this when we try it
That's really nice help, from you Crusoe86.
PINki92 said:
That's really nice help, from you Crusoe86.
Click to expand...
Click to collapse
I hope it will help the author...
I know how it feel when the own phone is broken.
My first HD2 was overrun by a car... And it takes me 5 month to repair it, because I can't get a keypad ribbon...
And my second HD2 is not really broken... My girlfriend loaned it two weeks ago for one week. She still has is, because she like the Android OS on it and until now she won't give it back to me. Now I have to wait until my Desire HD arrives me
What should I say... Women...
But... PPP works very well for her operator (BASE) on Android, I've interruptions every 5 minutes and I can be lucky if I can reconnect after each disconnect
Back to topic...
@coneman23:
I'll hope you've flashed a 2.**.50 radio (for e.g. 2.12.50) not a 2.**.51.
I've noticed, that those radios do not work with some ROMs.
Crusoe86 redirected me here.
is there actually a way to fix this?
maybe with goldcard and official 1.48 rom?
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Crusoe86 said:
Here I am...
You could try HSPL3 to revert back to an older SPL. Maybe that works...
And you can try older Stock ROMs like the 1.48 (from SD card (I use an old one when I flash my HD2, maybe thats is more compatible like newer SDHC cards)).
Andhopefully it replaces the new SPL.
But I would try the Goldcard method or try to boot SSPL from bootloader mode...
My girlfriend has my HD2 actually. I can't try anything
Click to expand...
Click to collapse
I dont know how to make a goldcard, so i cant make one.
I recommend that you try this (found in your thread).
If that does not work, we can make a Goldcard.
It is not very difficult, but this solution in your thread seems to be easier if it works.
Fellas,
2 questions about hspl and sspl,
1- It is said that HSPL can be removed from the phone right after the flashing is complete. Does the removal of the HSPL necessarily result in the ROM on the phone also getting removed/returning to its former version? I mean, is there any way to remove ONLY the hspl and actually keep the ROM new version that has been just flashed by the hspl?
2- After utilising SSPL for flashing a phone, the word “hspl” obviously will not be seen in the bootloader. I wonder if there is any way to find out if a phone has been sspl’d ( of course if the phone is flashed with a stock rom, not a cooked rom! )
Thank you
Meteorite-The-Second said:
Fellas,
2 questions about hspl and sspl,
1- It is bee said that HSPL can be removed from the phone just after the flashing is complete. Does the removal of the HSPL necessarily result in the ROM on the phone also getting removed/returning to its former version? I mean, is there any way to remove ONLY the hspl and actually keep the ROM new version that has been just flashed by the hspl?
2- After utilising SSPL for flashing a phone, the word “hspl” obviously will not be seen in the bootloader. I wonder if there is any other way to find out if a phone has been sspl’d ( of course if the phone is flashed with a stock rom, not a cooked rom!)
Thank you
Click to expand...
Click to collapse
i think you can remove the hspl with leaving any affects on flashed rom.
mon_money said:
i think you can remove the hspl with leaving any affects on flashed rom.
Click to expand...
Click to collapse
Hey, thanks for the reply.
Is this what you are advising? >> http://forum.xda-developers.com/showthread.php?t=623402
hspl yes you can remove hspl immediately and the rom will work fine.
sspl during the flash if you watch carefully when the phone enters bootloader, your spl changes to 1.42.6666
as soon as the phone restarts after the flash, your spl is back to what it was, no trace.
samsamuel said:
hspl yes you can remove hspl immediately and the rom will work fine.
Click to expand...
Click to collapse
Is it the way of going about this?
http://forum.xda-developers.com/showthread.php?t=623402
or does the above mentioned remove hslp AND AT THE SAME TIME change the ROM as well?
samsamuel said:
as soon as the phone restarts after the flash, your spl is back to what it was, no trace.
Click to expand...
Click to collapse
I have heard that RADIO doesn't change during sspl, is that correct? But I guess if someone sspl the phone with the same ROM version (only different in language, like when someone changes his CHN 3.14.xxx rom into WWE 3.14.xx), then the radio version will also ok and will leave no trace... right?
Thank buddy
Why do you keep posting questions in the 'Rom Development' pages? Carry on with your moans and groans in the proper Q&A pages and stop cluttering these pages even more with your inane drivel.
If I were the poor seller, who sold you the HD2, I would have shot myself by now!!
p.s. The information you need is here if you need guidance: http://forum.xda-developers.com/showthread.php?t=713942
Meteorite-The-Second said:
Is it the way of going about this?
http://forum.xda-developers.com/showthread.php?t=623402
Click to expand...
Click to collapse
well that will remove it, but will wipe your rom, meaning you will be back to a stock rom.
run hspl2.exe and choose 1.66.0000 or 2.08.0000 or 1.42.0000, thats it, hspl gone.
or does the above mentioned remove hslp AND AT THE SAME TIME change the ROM as well?
Click to expand...
Click to collapse
correct, that only works with your stock rom.
I have heard that RADIO doesn't change during sspl, is that correct? But I guess if someone sspl the phone with the same ROM version (only different in language, like when someone changes his CHN 3.14.xxx rom into WWE 3.14.xx), then the radio version will also ok and will leave no trace... right?
Click to expand...
Click to collapse
sspl cannot be used to flash radios, in teh way that hspl allows it, but im not really sure how it handles stock roms that include radios. The radio in teh twio roms you mentioned is identical/almost identical anyway, so it doesn't matter.
if its warranty you are worried about, its the hspl bit you should worry about, the rom and radio doesn't seem to matter.
Prozac69 said:
Why do you keep posting questions in the 'Rom Development' pages? Carry on with your moans and groans in the proper Q&A pages and stop cluttering these pages even more with your inane drivel.
If I were the poor seller, who sold you the HD2, I would have shot myself by now!!
p.s. The information you need is here if you need guidance: http://forum.xda-developers.com/showthread.php?t=713942
Click to expand...
Click to collapse
Fair enough. You are right
samsamuel said:
well that will remove it, but will wipe your rom, meaning you will be back to a stock rom.
run hspl2.exe and choose 1.66.0000 or 2.08.0000 or 1.42.0000, thats it, hspl gone.correct, that only works with your stock rom.
sspl cannot be used to flash radios, in teh way that hspl allows it, but im not really sure how it handles stock roms that include radios. The radio in teh twio roms you mentioned is identical/almost identical anyway, so it doesn't matter.
if its warranty you are worried about, its the hspl bit you should worry about, the rom and radio doesn't seem to matter.
Click to expand...
Click to collapse
Thank you a ton samsamuel. You are always so helpful.
P.S.
Question answered. Thanks
hi all
Is there a way to break hspl 3.03.0000 there?
Break HSPL? Be more specific.
bricked my leo2??
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
ligan35 said:
hello, happy new year for every one
i have the 3 color screens after flashing my leo with the last official rom by sd card.... the spl is 3.03... so i can't flash with 2.08 hspl .... and i have the message rom update error....
i would like to know if i can repair my leo with a hspl 3.03... and if exist....
thanks
Click to expand...
Click to collapse
Install the old 1.72 etc ROM through SD card and it will replace the SPL then you can put HSPL 2.08 for your desired Custom ROM. I hope this helps.?
Yup its simple go to shippedroms.com ... get ur stock rom... flash it... and ya then flash the hspl and radio
Sent from my HTC HD2 using XDA App
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
xcsi said:
Hmmmm, I have the 3.14 ROM with 3.03.000 SPL installed.
What I`m trying to do is Install NAND Android. But to do this I need HSPL 2.08.
Tried downloading one of the older stock roms and then attemped to flash via SD and through the .exe file directly.
From the .exe file it boots to the tri color screen and then reaches the progress bar screen. However it sticks there and the errors out with a code : 262.
Through the SD method after the phone detects the .nbh file it comes back with a "28002 : Not allow" error message.
Have tried this with varoius types of Mem cards but no luck.
Is it actually possible to downgrade a 3.03 SSPL?? I read in some forums here that it isnt.
Question : Since this isnt working, will a task 29 help in this case? From what I understand it formats the filesystem that holds the OS. By doing so, will I then be able to flash one of the older Roms so I can install HSPL 2.08?
Click to expand...
Click to collapse
Task 29 will not work with SPL 3.03.
You need to go to HTC's website and use your phone's serial number to download an older version of the ROM - you will only be allowed to download ROMs which are allowed for your phone. You cannot download a HTC stock ROM if your phone is restricted to a branded (phone operator's) ROM. You should be able to get a 1.66 or 1.72 or 2.08 or 2.10 ROM (dependant upon branding and country).
Put the phone into BootLoader mode, then connect to your computer and run the downloaded file.
it works!!!
download old original rom like 1.48.479.1_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
flash it via activesync/ win mobile center(win7)
it will downgrade 3.03.0000 to spl 1.42.0000
Thanks a lot for info!
Hey any clue how downgrading from a indian rom would be possible?
sudeep6258 said:
Hey any clue how downgrading from a indian rom would be possible?
Click to expand...
Click to collapse
Install the 1.47 stock rom
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
dacochir said:
Thank you all
My problem was solved with downgrade
cotulla's but please fix the problem with hacking.
Click to expand...
Click to collapse
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
samsamuel said:
lol, nice timing, its already solved. HSPL4 was released a few days ago, see link in my sig. Works with spl 3.03.0000
Click to expand...
Click to collapse
Thanks for this message!
I just received my device back from repair, worried about the 3.03.0000
Awesome i don't have to worry about that anymore
My HD2 needs to go in for repair so I need to remove HSPL and flash a stock WinMo ROM ready for monday when it is getting collected.
I have followed the instructions here - http://forum.xda-developers.com/showthread.php?t=623402 but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Would someone be kind enough to enlighten me here as I have to sort this before Monday.
Cheers in advance
Bry.
Bryski said:
but the screen does not go grey, there is a very quick flash then it returns to the multicoloured screen and pressing the power button does nothing
Click to expand...
Click to collapse
the quick flash is the bootloader looking for a valid file, and usually means one of a few things..
1 - the file isn't correctly named leoimg.nbh
2 - you simply renamed the htc_wwe_blahblah_.exe to leoimg.nbh instead of extracting ruu_signed.nbh and renaming THAT.
3 - you are using an sd card bigger than 4gb (not always the case, but most times bigger cards fail)
4 - the card is formatted FAT16 instead of FAT32
5 - hspl isn't installed after all and the ROM is not a match for the phones ROM/region lock. (what does the spl line say in bootloader?)
try those, see if it resolves it.
fix
go to http://forum.xda-developers.com/showthread.php?t=611433 and on the 4th post there is a zip at the bottom download unzip and run and just choose the non hspl
what hspl are you running?
Ok tried again and the bootloader screen looks like this
thats the right on but the last line about the touch is different i have 50 instead of 40
Any reason why it would be different?
Wanna make sure its dont right, dont want em sending it back and telling me I have hacked it
That's only a valid spl if you have a tmous,,,, if you have a regular hd2 then any spl starting 2 is wrong. Only tmous roms use 2.x spls.
Its a UK O2 phone mate, what have I done wrong then?
Bryski said:
Its a UK O2 phone mate, what have I done wrong then?
Click to expand...
Click to collapse
Well without scanning back through the thread, I'm guessing you had 2.08.hspl installed and ran hspl2 or 4, which will have defaulted to the opposite, namely 2.08.0000,
Or,you SD flashed a tmous stock rom, which didn't initially fail because hspl was installed, but then failed to continue to flash after the spl had changed because hspl was no longer there.
Fix - run hspl2 (hspl2 is the most usefull for us reg Leo users) and choose a matching spl to the rom version installed ...
Rom ....... spl
1.43 ....... 1.42.0000
1.66 ....... 1.66.0000
3.14 ....... 3.03.0000 -- you would need to use Hspl4 for this.
If the phone is buggered and wont boot, then it doesn't really matter which you choose, so long as it's one of those three.
(And in fact it probably wouldn't matter even if the rom and spl don't match,, they're only really interested in the spl, just nice to be cautious,would be a pain to have it sent back on a technicality)
Phone boots but I cant do anything with it due to the screen freeze which is why its going back to HTC.
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Bryski said:
Ok now it tells me I dont have SPL 1.42 on my phone and it refuses to flash a stock ROM :/
Guess I am screwed, new phone time
Click to expand...
Click to collapse
You're using the wrong hspl.exe, its v1 that requires 1.42 to work,,,try again.
Ok I think I got it
I should flash the latest ROM again aswell really as they asked me to do that when I rang em yesterday
All sorted and upgraded to the latest ROM ready to go back to HTC.
Cheers mate saved me a lot of heartache
Welcome...
while on this topic, im using Leo_RADIO_2.15.50.14** via HSPL
now i wish to return to my stock (which i am pretty sure is this :
RUU_Leo_HTC_Asia_WWE_1.48.707.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship.exe
(i copied down these details when i got my phone on the first day)
do i need to roll down to Radio 2.05.51.05_2 ?
i cant seem to get this ROM installed, whether its 1.42 SPL or 2.08 HSPL
i removed HSPL, and definitely not a TMOUS hd2 but cant install the stock rom
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Radio i am on now is the SPL-3.03.000 XE.
So after i installed it it says "software update failed, please try again."
attempted to try boot and keeps saying the same thing. Went into MAGDLR to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number.
i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Any help on this would be amazing, not sure whether i should try a task28/29 or whether there is a simple fix to this problem.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Drummerman44 said:
I've searched about trying to fix this on my own, but i have a feeling i may have caused more of a problem.
so trying to move back from android with a HSPL, i managed to install the original rom, but couldn't get rid of the CotullaHSPL when i flashed the new via USB.
Click to expand...
Click to collapse
hspl thread, post 1, hspl can only be removed by flashing stock rom from SD card or by using the hspl.exe utility.
so i looked for a Radio fix and ended up using the RUU_SIGNED.nbh radio from the same pack i used to install the rom
RUU_Leo_HTC_WWE_1.48.405.2_Radio_Signed_15.28.50.07U_2.05.51.05_2_Ship
Click to expand...
Click to collapse
that's the whole rom radio and spl, not just a radio. It will have flashed the radio when you did the USB flash.
Radio i am on now is the SPL-3.03.000 XE.
Click to expand...
Click to collapse
that's not a radio, that's spl 3.03.0000 which goes with 3.14 roms.
So after i installed it it says "software update failed, please try again."
Click to expand...
Click to collapse
the leoimg.nbh you mentioned can't be from the rom you posted. I'm gonna assume (because the outcome would be what you have now) that you flashed a stock 3.14 rom from SD, and step 1 is hspl being replaced by the stock spl for that rom, , in this case 3.03.0000,, then the phone reboots to start the flash, but because hspl has gone only the stock roms that match your phone will work, hence getting flash failed.
attempted to try boot and keeps saying the same thing. Went into MAGDLR
Click to expand...
Click to collapse
can't flash from magldr, I assume you mean bootloader,, coloured stripey screen.
to try and reinstall the same Radio again after a soft reset and it comes up with 00028002 with NOT ALLOWED underneath this error number. i attempted to reinstall is the rom, but not it just keeps stopping and telling me i cannot.
Click to expand...
Click to collapse
because its the wrong rom and there's no hspl to bypass the check.
Any help on this would be amazing, not sure whether i should try a task28/29 or
Click to expand...
Click to collapse
whether there is a simple fix to this problem.
Click to expand...
Click to collapse
yes, get correct stock rom, flash it from SD, done.
i didn't install the rom off the SD card, but i did install the Radio off the SD card.
it needs to go back to the original rom so i can claim warranty because of the touchscreen!
Thanks guys and i hope this was enough detail for someone to step in and help me and maybe someone else at the same time!
Click to expand...
Click to collapse
Correct stock rom. Must match country and provider, example mines from o2 UK, so only o2 UK stock roms can be used.
The rom you posted the name of, see it says "HTC wwe" well the HTC bit means it's unbranded,example bought from carphone warehouse. If your phone came from o2, it would say o2 wwe
Oh and forget about the radio, it comes with the rom.
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
nicknowsky said:
Bit off topic but once I've flashed MAGDLR can I ever go back to stock WinMO 6.5. I f'ed up and didn't SIM unlock my phone before I started hacking it up ( Hard SPL & MAGDLR)
Click to expand...
Click to collapse
flash stock rom. magldr gone.
samsamuel said:
flash stock rom. magldr gone.
Click to expand...
Click to collapse
figured that would be the course of action. Any particular stock TMOUS firmware I should flash.
Boy I sold my first HD2 about this time last year, just got a new one yesterday. And I gotta say WOW, this device has just gone crazy DEVn since the last time i owned it. Crazy things.
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
samsamuel said:
Doesn't matter, 2.10, 2.13 and 3.14 are the release versions.
Click to expand...
Click to collapse
Perfect! thank you buddy.