How to root X10 with new firmware? - XPERIA X10 Q&A, Help & Troubleshooting

How to root X10 with new firmware?
I am searching around for the solution and was told to boot into recovery mode but do not know how to do it?
Can anyone provide a clear solution with step by step instruction, thanks.
Sent from my X10i using XDA App

You can't root if you updated via Zeus you have to install z prerooted version
Sent from my X10i using Tapatalk

h.boushi1987 said:
You can't root if you updated via Zeus you have to install z prerooted version
Sent from my X10i using Tapatalk
Click to expand...
Click to collapse
You mean I can still overwrite the stock firmware with the pre-rooted firmware?
Will it damage the phone?
Sent from my X10i using XDA App

I spent about 4 hours updating to the rooted version of the newest firmware.
The only hurdle I came across was the X10Flash tool, which didn't work on W7 so I had to dust off an old XP laptop.
I done it with an X10i.
1st step.
http://forum.xda-developers.com/showthread.php?t=825675
I had issues with windows 7 but windows XP managed to update the phone painlessly.
2nd Step.
Download Z4Root and root phone.
3rd Step.
http://forum.xda-developers.com/showthread.php?t=859571
I had to use the manual version and copy those 3 files mentioned using root explorer.
4th step.
Reboot phone and make sure that the Xrecovery worked. Press the back button a few times as soon as the Sony Ericsson screen appears, hopefully your phone boots into the xrecovery screen. Reboot phone and load phone up normally.
5th step
http://forum.xda-developers.com/showpost.php?p=8976947&postcount=1
download the first executable file and follow instructions.
Make a new folder called firmware inside the flashtool release folder.
Run the X10flasher.jar file to make sure everything is sweet.
6th step
http://forum.xda-developers.com/showthread.php?t=885956
First copy all the .sin files into the firmware folder from step 5 above, and dont forget to download the loader.sin and place into the firmware folder.
run X10flasher.jar again and click Flash > firmware > OK
If it says searching for xperia then you are ready to go.
Exit x10flasher.jar
7th step.
Copy the update.zip to the root directory of your sdcard
and reboot phone into xrecovery mode.
install update.zip - you should see a progress bar.
once finished exit by removing battery and leave out for a few seconds.
8
insert the battery into phone and plug the mini usb into the x10 (but don't yet connect the usb to your pc)
9
Run x10flasher.jar and select flash
Should say Serching for Xperia...
10
Press and hold the back button on your x10 and plug the usb into the pc.
The X10flasher should now be updating your phone firmware.
when finished reboot phone normally.
This method will completely wipe all your settings, and in my case my Angrybird saves are also gone.

metcard said:
I spent about 4 hours updating to the rooted version of the newest firmware.
The only hurdle I came across was the X10Flash tool, which didn't work on W7 so I had to dust off an old XP laptop.
Click to expand...
Click to collapse
I read the instructions but not sure so I dare not proceed.
Care to share the instructions in details and if we are already on the new stock firmware, can we upgrade to the rooted version?
Sent from my X10i using XDA App

chongbh said:
I read the instructions but not sure so I dare not proceed.
Care to share the instructions in details and if we are already on the new stock firmware, can we upgrade to the rooted version?
Sent from my X10i using XDA App
Click to expand...
Click to collapse
The instructions are all there in the thread:
http://forum.xda-developers.com/showthread.php?t=885956
And you need to first install XRecovery, which can be found here:
http://forum.xda-developers.com/showthread.php?t=859571

hush66 said:
The instructions are all there in the thread:
http://forum.xda-developers.com/showthread.php?t=885956
And you need to first install XRecovery, which can be found here:
http://forum.xda-developers.com/showthread.php?t=859571
Click to expand...
Click to collapse
Thanks for your reply. I have read the xrecovery and the requirement is the phone need to be rooted first.
But my phone is not rooted and I have installed the new stock firmware so how to go about it?
Sent from my X10i using XDA App

Then you need to downgrade to the previous 2.1 firmware first. Try the method here:
http://forum.xda-developers.com/showthread.php?t=825675

Related

Unable to Root 2.1-update 1

I've had to go to the stock ROM and now want to re-root to install ROMs I'm using SE 2.1-update 1, Build 2.1.1.A.0.6, Baseband M76XX-TSNCJOLYM-53404015 and my X8 now seems to be un-rootable and I miss using froyo and gingerbread.
Roland
Rolandh said:
I've had to go to the stock ROM and now want to re-root to install ROMs I'm using SE 2.1-update 1, Build 2.1.1.A.0.6, Baseband M76XX-TSNCJOLYM-53404015 and my X8 now seems to be un-rootable and I miss using froyo and gingerbread.
Roland
Click to expand...
Click to collapse
Do you have USB drivers installed?
First step, instal PC Companion, so that the drivers for your phone is installed (if already installed, skip)
Second, download Bin4ry's X10Flashtool v 0.2.9.1 (search it)
Third, Extract, run x10flashtool.exe
Fourth, enable USB DEBUG on Settings, Application, Development. on your phone
Fifth, Connect your phone via USB, do NOT mount the sdcard, simply press back when asked that 3 options
Sixth, Click root, and wait, done. check if there is superuser app on your phone, if not, try root it again.
Last month a go, my x8 with stock 2.1 just got new update from PC companion,, upgraded and nothing wrong with root proges, u miss someting when doing root I guess,,,,,
Sent from my cyanginger shakira using XDA App
aldee_s said:
First step, instal PC Companion, so that the drivers for your phone is installed (if already installed, skip)
Second, download Bin4ry's X10Flashtool v 0.2.9.1 (search it)
Third, Extract, run x10flashtool.exe
Fourth, enable USB DEBUG on Settings, Application, Development. on your phone
Fifth, Connect your phone via USB, do NOT mount the sdcard, simply press back when asked that 3 options
Sixth, Click root, and wait, done. check if there is superuser app on your phone, if not, try root it again.
Click to expand...
Click to collapse
I think it way easier to use Super One Click.
Instal PC Companion, and connect it one time before you run SOC... skip if you already have drivers.
Download Super One Click... this one.
Enable USB debugging, connect phone to your PC, open SOC, click ROOT, wait, reboot. DONE!
I've used Super One Click like I've done in the past SU app appears in my app drawer. Root Checker says that I'm not rooted, but SystemApp Remover lets me remove system apps, so I'm rooted but I'm unable to install BusyBox. I've given up on trying to get BusyBox installed for now.
Roland
Rolandh said:
I've used Super One Click like I've done in the past SU app appears in my app drawer. Root Checker says that I'm not rooted, but SystemApp Remover lets me remove system apps, so I'm rooted but I'm unable to install BusyBox. I've given up on trying to get BusyBox installed for now.
Roland
Click to expand...
Click to collapse
You're doing it wrong.
http://www.mediafire.com/?lz6gwgohuakvbfo
Download this. Extract. Copy that three files in sytem/bin using Root explorer. Reboot when done.
That's xrecovery and busybox. Only that version works
Heyy... I had the same problem with rooting once.... i tried the busybox by stericson i guess, from market. It solved the issue...
I've currently given up on rooting as my X8 got a software update notification when I was connected to my laptop so I'm curious as to what the update is.
Roland
Rolandh said:
I've currently given up on rooting as my X8 got a software update notification when I was connected to my laptop so I'm curious as to what the update is.
Roland
Click to expand...
Click to collapse
I get same fake update but only changes is see in build.prob was not writed R2B it is writed R3B
Sent from my X8 using XDA Premium App
Dare-Devil Inside said:
I think it way easier to use Super One Click.
Instal PC Companion, and connect it one time before you run SOC... skip if you already have drivers.
Download Super One Click... this one.
Enable USB debugging, connect phone to your PC, open SOC, click ROOT, wait, reboot. DONE!
Click to expand...
Click to collapse
Yes it is true. But X10Flashtool gives more than just Rooting your device, its also gives JiT, Xrecovery, and an automated APK Installer, and also it automatically install busybox when rooting, so why use SOC if you want do more than just rooting?
I just give a all-in-one solution, so that he dont download anything else anymore. (for rooting, jit, xrecovery)
aldee_s said:
Yes it is true. But X10Flashtool gives more than just Rooting your device, its also gives JiT, Xrecovery, and an automated APK Installer, and also it automatically install busybox when rooting, so why use SOC if you want do more than just rooting?
I just give a all-in-one solution, so that he dont download anything else anymore. (for rooting, jit, xrecovery)
Click to expand...
Click to collapse
After u flash new rom, you'll get all of that, so whats the point?
Sent from my Arc-X8 using Tapatalk
as-mario said:
I get same fake update but only changes is see in build.prob was not writed R2B it is writed R3B
Sent from my X8 using XDA Premium App
Click to expand...
Click to collapse
I found out that the fake update was because I reverted to the 006 baseband from the 015 and removed some of the system apps that I don't use like wisepilot and Roadsync using System App remover, because it reverted back to baseband 015 and re installed the system apps that I removed.
Strange thing is that System App remover allowed me to remove system apps that needs root to do, while busybox install said that I wasn't rooted.
Will have a go at re rooting again as I quite like the look of ratchs Gingersense ROM.
Roland
aldee_s said:
First step, instal PC Companion, so that the drivers for your phone is installed (if already installed, skip)
Second, download Bin4ry's X10Flashtool v 0.2.9.1 (search it)
Third, Extract, run x10flashtool.exe
Fourth, enable USB DEBUG on Settings, Application, Development. on your phone
Fifth, Connect your phone via USB, do NOT mount the sdcard, simply press back when asked that 3 options
Sixth, Click root, and wait, done. check if there is superuser app on your phone, if not, try root it again.
Click to expand...
Click to collapse
The X10 Flash Tool worked including the provided Xrecovery. Currently flashing ratch's GingerSense v0.4 ROM.
Roland
@dare-devil, well, every other apps have problem so far, but X10flashtool don't, also, custom ROM doesnt have automated apk installer. Titanium backup? you have to install it first right?
Besides it's a VERY handy tool in case you brick your X8, because there will be a scenario where SEUS doenst want to update/reflash your phone, i have encountered that, thats why i use x10flashtool for flashing my phone.
@roland, of course, its created by Bin4ry and Androxyde. 2 great devs
aldee_s said:
@dare-devil, well, every other apps have problem so far, but X10flashtool don't, also, custom ROM doesnt have automated apk installer. Titanium backup? you have to install it first right?
Besides it's a VERY handy tool in case you brick your X8, because there will be a scenario where SEUS doenst want to update/reflash your phone, i have encountered that, thats why i use x10flashtool for flashing my phone.
@roland, of course, its created by Bin4ry and Androxyde. 2 great devs
Click to expand...
Click to collapse
It makes it easier than Super One Click as you don't have to mess around with downloading the Busybox Installer and then Installing Busybox.
I'm sure it'll save me having to put .apk's that I download off the forums onto my sd card and then Install using Root Explorer to install them one by one.
Roland

Rooting to Flashing ROM in x10 mini from scratch

Again thanks to xda. Flashed a new 2.3.7 ROM in x10 mini. Here are the steps from scratch.
Check the update, kernel and firmware version before proceeding.
The whole procedure involves
1. Rooting (with Busybox installing)
2. Installing the recovery
3. Unlocking the bootloader (this tutorial is for only unlocked, first hand, SEMC certificate devices)
4. Flashing a new kernel
5. Flashing the ROM and google apps
6.
Before proceeding backup the contacts, messages, notes etc. (Titanium backup can be used after rooting)
I. Rooting
1. Download the Superoneclick from here. http://forum.xda-developers.com/attachment.php?attachmentid=485088&d=1294607042 Unzip the contents into required folder.
2. Enable the option to install from unknown sources in phone
3. Enable usb debugging in the phone
1.
di. It is desirable to have sony ericsson update service installed and the phone recognized (with necessary drivers installed)
5 .run the superoneclick.exe
6. insert the cable and select charging in phone
7. select root
yes it is done. Reboot your phone. Go to the apps menu and confirm a app called super user is installed.
Then go to the market and install following 3 apps
1. busybox
2. root explorer (for later use)
3. astro file manager (if needed)
II. Installing the Recovery
1. Download the necessary files from here. http://forum.xda-developers.com/attachment.php?attachmentid=616283&stc=1&d=1307259517
2. Unzip the files and copy the bin and xbin folders in system folder to sdcard of phone
3. Open the root explorer and mount as r/w instead of r/o
4. Then move the contents of bin folder to /system/ bin folder in phone and xbin to xbin (only contents, not folder)
5. Change permission of all the files, by ticking all the boxes.
That is it. You have now clock work mod recovery. This can be confirmed by using astrofile manager to see if there is respective files moved. Or power off the phone and switch it on again, when the logo of sony ericsson comes keep pressing and releasing the back switch of phone. If everything have gone correctly till now you will enter the recovery mode.
III. Unlocking the bootloader (for installing a custom kernel)
1. download the flashtool from (0.5.3 -I used) here. http://androxyde.github.com/Flashtool/
2. before advancing further download the required ROM (for me miniCM7 from http://minicm.googlecode.com/files/MiniCM7-2.1.6.zip )and google apps from http://cmw.22aaf3.com/gapps/gapps-gb-20110613-signed.zip and copy both to the root of sdcard
3. open the install location of flashtool and install the ggsetup-2.2.0.11.exe file inside and install Gordon's Gate found in /drivers folder
4. then restart the computer, open the task manager and kill any process named adb.exe
5. donot open flashtool after this till needed.
6. Download the s1tool to confirm the unlock certificate of phone from http://db.tt/OrOQO33 and unlocking tools from here http://db.tt/0zUMR5S4
7. Unzip the s1 tool to the designated folder and run the s1.exe. Switch off the phone. Select the Do Job button and wait.
8. Connect the phone in flash mode (switched off and back button pressed)
9. proceed further only if the screen shows semc simlock certificate
10. unplug the phone, switch it phone, connect to the computer
11. run msm7227_semc.cmd in the directory you unzipped the unlocking files to and press any key to start the unlocking process.
12. If everything goes correctly the log will show press any key at the end.
Now you have unlocked the bootloader we can proceed to kernel flashing
IV. Flashing the kernel and ROM
1. download the require kernel.ftf from auther's site (for me the kernel suiting my ROM was nAa kernal from http://minicm.googlecode.com/files/E10_nAa-08_2.6.29.6-nAa-08.ftf
2. copy this to the /firmware folder in flashtool install folder
3. run the flashtool and select flash, then flashmode
4. select the desired kernel
5. switch off the phone and connect in flash mode when pop up requests
6. disconnect phone when the tool says so
7. switch on the phone and enter the recovery mode when kernel logo comes by repeatedly pressing and releasing the back switch
8. in the recovery mode, do a backup from backup and restore option (up and down by volume keys and select by middle switch)
9. do a factory wipe data
10. then flash the ROM zip by selecting the option install zip from sdcard option followed by gapps zip flashing
11. finish this and take reboot (long)
Enjoy the new experience.
Not trying to be rude, but i think there lot of tutorials for this...
Anyway i hope you had a very nice experience with this...
i remember my first rooting... i was very very scared if i'll brick my phone...
hi
karthiks.840 said:
Not trying to be rude, but i think there lot of tutorials for this...
Anyway i hope you had a very nice experience with this...
i remember my first rooting... i was very very scared if i'll brick my phone...
Click to expand...
Click to collapse
yeah..sure there are many. But I couldnt find a single thread giving out all in one. I had to search and stray around a lot. So thought it would be better like this.
Actually it was not for my phone, was helping out on my friend's. Mine is a poor little x10mini pro with orginal kernal and Mini CM ROM.
About bricking, I tasted it on my ideos tablet and took the trouble to bring it alive. So knows the scaring part a bit..
thanks any way for the wishes
i'm having Xperia x10 mini..which has 2.1 ,can i upgrade to 2.3 (gingerbrad).
Please ,do help me inthis...
thank you ..
Yeah..its laid out here. Follow it step by step.have the latest update of stock sony rom before starting (most probably you would be having)
Sent from my U20i using XDA App
can i restore my contacts and messages after installing miniCM 7.2.1.7 how? currently i am having stock se firmware i.e 2.1 planning to follow ur steps reply thanks!!
aryanjain said:
can i restore my contacts and messages after installing miniCM 7.2.1.7 how? currently i am having stock se firmware i.e 2.1 planning to follow ur steps reply thanks!!
Click to expand...
Click to collapse
Mate before u flash any custom ROM ..u need recovery and for that need root first.. N to make backup u got many app in market which require root.. Like titanium for backup of all apps, then mybackup pro for sms contacts and also apps..
Ddzd34 its nice guide.. for unlocking bootloader maybe u can pull my threads link as alternative to ur guide..heres the link http://forum.xda-developers.com/showthread.php?t=1462278
[Software v1.1] [25/1/2012] Bootloader and kernel guide X10 mini | X10 mini pro|X8|W8
Nice work..
Cheers
does it is possible to restore all my contact ,messages system settings with clockworkmod ver 5.0 which is coming with naa kernel v9
aryanjain said:
does it is possible to restore all my contact ,messages system settings with clockworkmod ver 5.0 which is coming with naa kernel v9
Click to expand...
Click to collapse
U cannot restore any user data with the recovery restore.. N go a bit slow..as u are new to flashing ROMs n rooting..DO NOT jump to unlock bootloader unless u feel u know what u are doing is right.. Be carefull or u may brick ur phone.. !! Just read threads before u move further..
aryanjain said:
does it is possible to restore all my contact ,messages system settings with clockworkmod ver 5.0 which is coming with naa kernel v9
Click to expand...
Click to collapse
Root your phone and use my backup root from market. It answers for all your problems.
Sent from my U20i using XDA App
faiyyaz said:
Ddzd34 its nice guide.. for unlocking bootloader maybe u can pull my threads link as alternative to ur guide..heres the link http://forum.xda-developers.com/showthread.php?t=1462278
[Software v1.1] [25/1/2012] Bootloader and kernel guide X10 mini | X10 mini pro|X8|W8
Nice work..
Cheers
Click to expand...
Click to collapse
Thanks.
Sent from my U20i using XDA App
Thank you for this good guide. It's simple but effective specially for non Android pro like me. I remember the first time I rooted my x10mini took me 2 days, the second 2 hours, this time 2 minutes.. no joke.
The strange thing was that a new version of SuperOneClick2.3.3 didn't work. It gave error when starting before I begin to root. The version supplied here worked!
Concerning Recovery/Unlock/FashRom, I'm interested but paranoid plus not very clear about their advantages. Thank you again.
need help
hi there,
i'm having problems, can you help me please?
I couldn't install cwm recovery you posted, so instead i used CWMInstaller-Windows-v4-dl.zip, and it worked fine with my rooted u20i mini pro. I flashed kernel you gave us, and now i can't enter cwm recovery. When i turn on the phone, kernel logo appears, i start pressing back button, but nothing happens, the screen just goes black... Any idea what i did wrong?
Tnx!
Apologies for my reply being late.
The cwm installer you used is specifically for pro. I think you have to start again
Sent from my U20i using XDA App
Tnx, i succeded to finish everything. That cwm recovery i used worked exellent, i used wrong kernel. I have fantastic rom now thanks to xda!!!!
Sent from my U20i using XDA App
can't do it
Thanks for this tutorial,it's pretty straightforward, not like others that make your life miserable trying to figure out what they are trying to say,lol,just kidding.
But quick question if I may, I tried every single way to bootloader unlock my x10 mini and when I try I get a message in cmd about a daemon that doesn't start, then it says that it started succesfully and it does nothing else after that, those were my last intends to bootloader unlock, before I got messages about daemon as well,but multiple times and in the end said that it couldn't start daemon, I can't bootloader unlock my x10 mini please help!!!
[email protected] said:
Thanks for this tutorial,it's pretty straightforward, not like others that make your life miserable trying to figure out what they are trying to say,lol,just kidding.
But quick question if I may, I tried every single way to bootloader unlock my x10 mini and when I try I get a message in cmd about a daemon that doesn't start, then it says that it started succesfully and it does nothing else after that, those were my last intends to bootloader unlock, before I got messages about daemon as well,but multiple times and in the end said that it couldn't start daemon, I can't bootloader unlock my x10 mini please help!!!
Click to expand...
Click to collapse
Did your s1 tool showed semc simlock certificate? That may be the reason. If not u have to use another command line not the given cmd
Sent from my U20i using XDA App
ddz334 said:
Did your s1 tool showed semc simlock certificate? That may be the reason. If not u have to use another command line not the given cmd
Sent from my U20i using XDA App
Click to expand...
Click to collapse
yes it did,but nothing, what should I do then?
[email protected] said:
yes it did,but nothing, what should I do then?
Click to expand...
Click to collapse
But nothing means?
Sent from my U20i using XDA App

[NOOB-GUIDE][ALL IN ONE GUIDE][NEO V]Xperia Neo V PREPARING PHONE AND PC FOR ANY ROM

Since i see many people having problems with installing cm9 on neo v, i've decided to help them
If you're a noob, have a look at this http://forum.xda-developers.com/showthread.php?t=1409269
If you're not a noob, proceed with the steps confirming that you have performed the steps
PLEASE FOLLOW THE STEPS CAREFULLY
THE REFERENCE LINKS GIVEN ARE ONLY MEANT FOR READING AND INFORMATION PLEASE DONT FOLLOW THEIR INSTRUCTIONS TO DO SOMETHING TO YOUR PHONE.
Step 1: PREPARE YOUR COMPUTER
http://www.youtube.com/watch?v=Khrxo0-NieM
it will explain a lot please watch it, download links are below
thanks for the video....
Downloads:
1)Android SDK- http://developer.android.com/sdk/index.html
2)ADB Drivers- http://www.mediafire.com/?6u1zl54w3jnvvax (just open the .cat files(x86/x64) and the drivers will be installed )
3)After watching the video, download (http://www.mediafire.com/?4qoenin9cjn7s7i) fastboot and place(copy paste) the 3 files in your android sdk directory>platform-tools(for me its C:\androidSDK\platform-tools)
if platform tools is not present, please follow the video again you have to instll "tools" package in SDK.
4)Flashtool- http://androxyde.github.com/ -go to the installation tab and download it (130 mb)
Step 2: ROOT THE PHONE
If you have no idea about rooting, have a look at this http://droidlessons.com/what-is-rooting-on-android-the-advantages-and-disadvantages/
How to know that you are rooted-lookout for "superuser" app in app drawer, if found, you have rooted your phone.
if you are on official ICS 4.0.3 ,
1)[ requirements ]
a)stock ICS firmware 4.1.A.0.562 for your device
b)ADB drivers installed (if u are not sure, then install http://icxperia.com/doomlord/Flashtool-drivers.exe)
c)the tool http://bit.ly/ert_xperia_2011_ics_1
2)[ READ THE FOLLOWING CAREFULLY! ]
This script will:
root ur device using "andorid emulator" trick
install Busybox (1.18.4)
install SU files (ICS specific)
do some checks for free space, tmp directory (will remove Google Maps if required)
Before u begin:
make sure u have installed adb drivers for ur device
enable "USB DEBUGGING" - from (Menu\Settings\Developer Options\Development)
enable "UNKNOWN SOURCES" - from (Menu\Settings\Security)
[OPTIONAL] increase screen timeout to 10 minutes
connect USB cable to PHONE and then connect to PC
skip "PC Companion Software" prompt on device
3)[ WARNING ]
make sure that no other adb server is running in background (e.g.: Flashtool, PCC, SEUS) and disable any antivirus
4)[ how to install? ]
Connect your phone in MSC (mass storage mode) mode(SD card can be viewed on PC)
make sure that you are on stock ICS firmware 4.0.3
download the files
extract ALL the files in the zip
now just double click on "runme.bat"
sit back read the on screen instructions
the device will reboot a couple of times
when the script finishes it will say "ALL DONE"
enjoy!
If you're on Official ICS 4.0.4 ,
1)Make sure that you have flashtool installed and that you're on official ICS 4.0.4
2)You'll have to flash baseband of 4.0.3
a)Download the 4.0.3 baseband - http://www.mediafire.com/?gwe739kn5mcx56t and place the .ftf file in C:\Flashtool\firmwares
b)connect phone inMSC (mass storage mode) mode
c)open flashtool and wait for a minute
d)on top left, click the lightning icon
e)flash mode>ok
f)select MT11i(devices), 4.1.A.0.562 (version)
g)make sure that wipe cache and app log is unchecked,dont exclude anything.
h)press ok and follow the steps
i)phone will boot once flashed(may take longer to boot, dont panic)
j)voilla!! now you're on 4.0.3
3)Now scroll up and follow the same steps for 4.0.3
4)runme.bat will root the phone
5)Enjoy the rooted phone!!!!
My thanks to doomlord and madfysh
IMPORTANT !!!!!!
ONCE ROOTED,
Download https://play.google.com/store/apps/details?id=com.keramidas.TitaniumBackup&hl=en and backup all your apps(on SD card)
Step 3(next step) of this post will reset(factory reset) your phone.
BACKUP ALL YOUR CONTACTS AND CALENDER ON GOOGLE
BACKUP ALL YOUR MESSAGES AND IMPORTANT STUFF !!
MAKE A BACKUP OF YOUR SD CARD ON PC FOR SAFETY (THIS WILL BE DONE AFTER ALL BACKUPS ARE DONE I.E. LAST BACKUP)
Step 3: UNLOCK BOOTLOADER
If you have no idea about this, read this
Why exactly is this a big deal? For the general population, this doesn’t matter. However, for the modding community, locked bootloaders are simply a pain. When the bootloader is locked, certain portions of the device are unable to be customized such as recoveries or kernels. A lot of the time, when rooting a device, the first step requires the bootloader to be unlocked or bypassed. So, depending on the device in question and the will of the developer, creative Android hacking has allowed some devices with locked bootloaders to run custom ROMs. Generally, these devices aren’t as stable as they could be if the device was able to be completely customized from the ground up.
1) http://unlockbootloader.sonymobile.com/ and follow the steps carefully ( skip step 13, we've already done that )
IF YOU GET STUCK ON STEP 14,DO THIS
to navigate to android SDK folder, use this command(without quotes)
"cd location_of_your_android_SDK\platform-tools"
for me, it was - "C:\androidSDK\platform-tools"
2)If you followed the rules, you will have an unlocked bootloader
3)Yipeeee !!!
4)Dont worry about your apps, they're still on your SD card
5)Restore only the apps which are very important and you cant live without them for a day..
Step 4: INSTALLING CWM(CLOCK WORK MOD / RECOVERY)
if you dont know what cwm is, just read but dont follow the steps to install it
http://www.addictivetips.com/mobile...-and-how-to-use-it-on-android-complete-guide/
1) http://www.mediafire.com/?73xv18tht0e8zt4 download cwm
2)Connect your phone in MSC (mass storage mode) mode and wait until SD card available to PC
3)increase your display time out to 2 minutes
4)Enable USB debugging and allow 3rd party/unknown sources
5)open the downloaded folder(extract first)
6)Run install-cwm1.cmd
7)sit back and enjoy!!!
8)once finished, you'll have cwm installed!!!!
9)to check if you have cwm, turn off phone
10)turn on and when sony logo appears, repeatedly press vol down button until you reach a blue colored menu, if successful, cwm is installed properly!! if not, please comment or reinstall it.
11)navigation in cwm-
go up-vol up
go down-vol down
select option-home button
previous menu-back button
thanks siddharthsure93
Step 5: TAKING A NANDROID BACKUP
if you have no idea about this, read this
http://forum.cyanogenmod.com/topic/38468-nandroid-backup-what-is-it-and-did-i-need-it/
make sure that your sd card has at least 1gb free space and you have 50% battery charge
1)Hoping that you have cwm installed, turn off phone
2)Enter cwm by repeatedly press vol down button when sony logo appears
3)go to "backup and restore"
4)select "backup"
5)wait for 10-15 minutes till your phone is backuped
6)now you have a copy of your current phone and rom memory
we do this to restore phone if something goes wrong
NOW YOU HAVE PREPARED YOUR PHONE TO GET CM9 OR ANY FU*KIN ROM !!! :good::good:
IF I GO WRONG SOMEWHERE, PLEASE CORRECT ME WE ALL LEARN FROM OUR MISTAKES.
PLEASE PRESS THE THANKS BUTTON IF I HELPED YOU
http://forum.xda-developers.com/showthread.php?p=29453825#post29453825
continue to this to install cm9 for neo v
the_neo_v_guy said:
Look people what i found !!!!!!
ROOTING is now super easy !!!
http://unlockroot.com/
This software can root any android device!!!
More than 500 devices supported !!!
so no need of flashing kernel !!!!!!
Click to expand...
Click to collapse
..
Support the Android 2.1,2.2 and 2.3
Click to expand...
Click to collapse
Another thread by you..
This makes me more sad...
geekynoob said:
Another thread by you..
This makes me more sad...
Click to expand...
Click to collapse
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
the_neo_v_guy said:
I'm sorry for that because i had no idea of sections at that time
but now everything's allright.
sorry for the inconvenience :/
Click to expand...
Click to collapse
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
geekynoob said:
No sorry bro.. ur a 14yr old guy..just read the Forums..and the steps uv mentioned..there was no need for these threads..tonnnes of people using cm9 and other roms..But i hope its useful for someone..Pls take notice and b careful from now on..
Sorry if i was a bit rude..this work of mine is getting up into my head...
Click to expand...
Click to collapse
Yea, I may have helped some noobs, just made the steps clear because 3 months ago when i was a total noob at android and xda, i could only find android terms but not any thread that gave clear instructions, i had to google around for weeks until i could understand what everything was
Anyways, i do understand your mood, but what work are you on?
I just find a way to simple unlock any phone!
just visit http://www.fastgsm.com/en
For neo/v visit
http://www.fastgsm.com/en/page/how-...a-x8-x10-mini-pro-e15-e10-u20-so-01b-aspen-m1
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
wilfacts said:
I have a noob question
Im with a neo v with A.0.62 firmware
Which cannot be rooted
But i have already unlocked bootloader
what can I do now?
If i directly flash in JB Kernel and rom, will I be able to have root permissions? Do i even need to care about my .62 firmware if i want to go into CM10?
What should i do? Thanks!
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You will need to root your phone first. Installing a custom ROM won't automatically give you root acces. In fact, I don't think you will be able to install a custom ROM without ClockWork Mod Recovery which needs root access first. Follow Sony's own rooting guide here: http://talk.sonymobile.com/thread/41119?start=0&tstart=0. Then install X-Parts from the Play Store to get CWM.
Once you have CWM you can install any appropriate custom ROM you like.
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
AW: [NOOB-GUIDE][ALL IN ONE GUIDE][NEO V]Xperia Neo V PREPARING PHONE AND PC FOR ANY
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
Use flash tool and an ftf file to update to ICS. You can go with 0.587 version for example.
After update as you are on unlocked bootloader you should flash a custom ICS kernel like suave, night elf or any other ICS compatible. This will give you root and cwm.
Look at the stickys. You will find all you need.
Gesendet von meinem Xperia Neo V mit Tapatalk 2
wilfacts said:
Oh is that gonna be painful
Iv unlocked bootloaded with .62 firmware
So i cant get to official ics and stucked with the .62, flashing an older firmware for the root is risky? After that i have to go back to .62 again?
so confused
Sent from my SHV-E120L using xda app-developers app
Click to expand...
Click to collapse
You can always relock the bootloader (don't know what method you used to unlock, so can't advise on how to relock - I only know how if unlocking was done through Sony). Update the firnware to stock Sony ICS using Sony's PC Companion. Then root it using Sony's rooting guide. After rooting you can unlock the bootloader again. Install X-Parts and CWM. Then try out the custom ROMs+kernels to your heart's content.
neo668 said:
I only know how if unlocking was done through Sony
Click to expand...
Click to collapse
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
On the other hand,unlocking via official method gives you an easy option to Relock bl via flashtool!
There's a thread by Blagus on how to do that!
Btw even Relocking via setool is an option for unofficially unlocked bl users!
So there's always an option!
Sent from my MT11i using xda premium
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
BlitzBerg said:
If this is what you're talking about, I've read it. But will it allow me to use the PC Companion and receive updates(Although I hardly feel there's going to be more than 1 update)/ Go back to official Sony ROM?
Click to expand...
Click to collapse
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
---------- Post added at 08:20 AM ---------- Previous post was at 07:54 AM ----------
BlitzBerg said:
Could you share how? I've heard if its officially unlocked, you cannot lock it again.
Click to expand...
Click to collapse
http://unlockbootloader.sonymobile.com/
neo668 said:
Yes. That's the tutorial I'm talking about. I only mentioned what I did because I've done it before. After relocking use PC Companion to update your phone. Or the Sony phone repair program. I don't remember which. If you try both (like I did) one (or both) of them will work. But still you are out of warranty. You know that, don't you?
Click to expand...
Click to collapse
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
BlitzBerg said:
Basically its all about DRM loss. What do I exactly lose? Only trackid? I suppose the newer versions run on unlocked bootloaders as well.
Click to expand...
Click to collapse
I think you are right. It's basically about losing DRM. I don't know what it is and of what use it is. All I know is I've never missed it. If you are into trying out custom ROMs then unlocking the bootloader is a must because certain custom ROMs need custom kernels. To install custom kernels you must have an unlocked bootloader.

[Q] Can Not Update The Phone

I have a Sony Ericsson XPERIA X10 and I rooted it correctly. Then I try to update the software via PC Companion. When I am trying to update it says "Not Connect to the internet". But I have already connected to the internet with ADSL modem.
Then I try to manually do that. I downloaded and install the RecoverX ( http://forum.xda-developers.com/showthread.php?t=1773227).
Then I run adb with "adb root recovery" command it says "adbd cannot run as root in production builds"
can anybody help me to figure this out. I am a newbie for these things and help me to update the software.
Thanks
I've never used RecoverX, so I don't know what did you do wrong.
search on the forum for 2.3.3 stock ROM, download it and then flash it with flashtool, check your drivers installed and usb debugging checked. Luck,
you have the drivers if you have pccompanion. download flashtool by bin4ry, its easy to use and can do evrything (but ****iing gold^^)
than search for "dixperia 7 avenger" by dikeJ. there you get 2.3.3 stock rom. or an excellent custom rom
in flashtool, if it can detect your root, install xrecovery (theres a panel "custom recovery installer")
and oit of that recovery you flash the zip file. if you dont have 2.3.3 kernel on your phone (if 2.3.3 is not available in your place), you will first have to flash the stock 2.3.3 kernel (i think also givin in dixperia 7 thread) download it and put it into "firmwares" in tje flashtool folder. then open it, wait till it verified your root and click flash, and chose the kernel. if it doesnt work, unlock
bootloader first (after verified root, click plugins and "unlock bootloader") i suggest you to do this in every way because then you wont have trouble
Greets
Sent from my Xperia X10 using xda app-developers app
The problem ur having is with PC companion itself.. for some reason it isn't able to connect to ur net.. check ur firewall settings n make sure its allowed to access net..
Also, since uve rooted ur phone, u might as well look at the post above mine n get a custom ROM
Sent from my Xperia X10 using xda app-developers app
yep my post is great dixperia 7 is the perfect rom to start with, it was my first one and it was the best one
Tell us if you succeded please
Gteets
Sent from my Xperia X10 using xda app-developers app

[Help] Root Xperia U

Hi everyone, my brother asked me to root his Sony Xperia U.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1933985
But it always says that it failed to root, attached the log file for you guys to see.
TugaSonic said:
Hi everyone, my brother asked me to root his Sony Xperia U.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1933985
But it always says that it failed to root, attached the log file for you guys to see.
Click to expand...
Click to collapse
do you install drivers at flashtool?
after install import device,Xperia U at flashtool
Ben Ling said:
do you install drivers at flashtool?
after install import device,Xperia U at flashtool
Click to expand...
Click to collapse
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
TugaSonic said:
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
Click to expand...
Click to collapse
For this you will need Flashtool and Xperia drivers intalled on your PC. (Installing Sony PC companion will do)
Well, what you need to do is download the kernel of previous version. I have attached a file but I am not sure if its the old version. (.10)
Flash FTF of your desired STOCK rom ICS via Flashtool.
Flash kernel of any version before 6.1.1.b.1.54 .
Root it using the file attached.
And you are done!
Make sure the USB tethering is ON in Settings >development !
I have attached the files on page 11 on this post:
http://forum.xda-developers.com/showthread.php?p=42244647#post42244647
Hnk1 said:
For this you will need Flashtool and Xperia drivers intalled on your PC. (Installing Sony PC companion will do)
Well, what you need to do is download the kernel of previous version. I have attached a file but I am not sure if its the old version. (.10)
Flash FTF of your desired STOCK rom ICS via Flashtool.
Flash kernel of any version before 6.1.1.b.1.54 .
Root it using the file attached.
And you are done!
Make sure the USB tethering is ON in Settings >development !
I have attached the files on page 11 on this post:
http://forum.xda-developers.com/showthread.php?p=42244647#post42244647
Click to expand...
Click to collapse
Just tried to flash the kernel and when I start the phone all I can see is a black screen (as wallpaper) and the normal icons on top (baterry, etc.) and I can't do anything else with the phone.
Is that normal? If so I just have to root it now with the file attached on your post right?
TugaSonic said:
Yes, I installed drivers, when I go to import device it just says that there's no device to import.
Also, after trying one more time, when I press the confirm button (step 5 of the tutorial) it says that an error ocorred (it says something about memory and to try again),
Click to expand...
Click to collapse
TugaSonic said:
Just tried to flash the kernel and when I start the phone all I can see is a black screen (as wallpaper) and the normal icons on top (baterry, etc.) and I can't do anything else with the phone.
Is that normal? If so I just have to root it now with the file attached on your post right?
Click to expand...
Click to collapse
NO, but don't worry.
Is your bootloader unlocked?
if not, this must be the reason.
if ýou have unlocked bootloader then,
Flash kernel again and root it using .10.
I am thinking you must have disconnected the phone in the middle.
Were you on administration when you tried to flash it ?
You must give administration rights to run the programme.
Were the drivers properly installed ?
A screen came and said to restore and then you didnot disconnect your phone till the programme asked you to ?
Have you followed instructions properly ?
IF all this doesnot work, Flash FTF of ICS of any ICS you like . Root it again !
I have rooted my phone so many times with the file i sent !
And you are using the option 1 when it asks you to root. You are rooting a mobile and not a tablet.
If anything you need to ask, I be writing you back!
Hnk1 said:
NO, but don't worry.
Is your bootloader unlocked?
if not, this must be the reason.
if ýou have unlocked bootloader then,
Flash kernel again and root it using .10.
I am thinking you must have disconnected the phone in the middle.
Were you on administration when you tried to flash it ?
You must give administration rights to run the programme.
Were the drivers properly installed ?
A screen came and said to restore and then you didnot disconnect your phone till the programme asked you to ?
Have you followed instructions properly ?
IF all this doesnot work, Flash FTF of ICS of any ICS you like . Root it again !
I have rooted my phone so many times with the file i sent !
And you are using the option 1 when it asks you to root. You are rooting a mobile and not a tablet.
If anything you need to ask, I be writing you back!
Click to expand...
Click to collapse
Hi again, I still haven't tried rooting since I don't have bootloader unlocked.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
But when I went to verify if I can unlock my phone's bootloader it says No. Do I have to follow another tutorial? Or is it impossible?
TugaSonic said:
Hi again, I still haven't tried rooting since I don't have bootloader unlocked.
I tried following this tutorial: http://forum.xda-developers.com/showthread.php?t=1527159
But when I went to verify if I can unlock my phone's bootloader it says No. Do I have to follow another tutorial? Or is it impossible?
Click to expand...
Click to collapse
As I suspected, your phone has come with locked bootloader. This means that Sony will not support your phone to be unlocked. The reason simply is they do not want to give out cheap phones so you can use any other sim on your phone. However, you can only run roms which support locked bootloader and you can not experiment much with your phone as it will brick your device. There are quite few roms which support locked bootloader. Further, the tutorial is simply from Sony and thus will not work for your phone!
Hnk1 said:
As I suspected, your phone has come with locked bootloader. This means that Sony will not support your phone to be unlocked. The reason simply is they do not want to give out cheap phones so you can use any other sim on your phone. However, you can only run roms which support locked bootloader and you can not experiment much with your phone as it will brick your device. There are quite few roms which support locked bootloader. Further, the tutorial is simply from Sony and thus will not work for your phone!
Click to expand...
Click to collapse
OK, one last thing, I found this rom (it says that works with locked bootloader): http://forum.xda-developers.com/showthread.php?t=194647
But in the instructions it says to flash it via CWM (I know that it's a custom recovery), I searched and the tutorials I found either ask for root or unlocked bootloader.
The text file attached in OP doesn't help much as I am not able to know which FW are you using.
I assume that the FW is greater than B.1.10 which Is why u are facing problems while rooting as the FW used in the guide in OP is B.1.10.
FYI, B.1.10 was directly rootable without much hassle just by following the guide but if you have a C.1.0 / B.1.89 / B.1.100 Stock Rom on your device then you will have to do some extra steps
Sent from my Xperia U using xda app-developers app
Mayank7795 said:
The text file attached in OP doesn't help much as I am not able to know which FW are you using.
I assume that the FW is greater than B.1.10 which Is why u are facing problems while rooting as the FW used in the guide in OP is B.1.10.
FYI, B.1.10 was directly rootable without much hassle just by following the guide but if you have a C.1.0 / B.1.89 / B.1.100 Stock Rom on your device then you will have to do some extra steps
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
On my phone it says, Build Number: 6.1.1.B.1.54
Here's the Rooting Process for you.
This Rooting guide applies to all FW versions above B.1.10.
1) Open Flashtool.
2) Click the Flash icon.
3) Select Flash Mode. (Make sure USB Debugging is ON in your Mobile Settings before connecting to PC)
4) Select & Flash the B.1.10 kernel. Then Reboot.
5) Select the Un-Lock icon and choose your preferred SU app & proceed.
6) Follow the on-screen instructions.
7) Now you have rooted your device.
8) Flash B.1.54 kernel and let the device reboot.
Downloads
B.1.10 Kernel - Download Here
B.1.54 Kernel - Download Here
Click to expand...
Click to collapse
Mayank7795 said:
Here's the Rooting Process for you.
This Rooting guide applies to all FW versions above B.1.10.
1) Open Flashtool.
2) Click the Flash icon.
3) Select Flash Mode. (Make sure USB Debugging is ON in your Mobile Settings before connecting to PC)
4) Select & Flash the B.1.10 kernel. Then Reboot.
5) Select the Un-Lock icon and choose your preferred SU app & proceed.
6) Follow the on-screen instructions.
7) Now you have rooted your device.
8) Flash B.1.54 kernel and let the device reboot.
Downloads
Click to expand...
Click to collapse
But I need the bootloader unlocked to follow that process, don't I?
TugaSonic said:
But I need the bootloader unlocked to follow that process, don't I?
Click to expand...
Click to collapse
You don't need to unlock your bootloader in case of flashing stock kernels.
Unlocking bootloader is necessary to flash custom built kernels.
Sent from my Xperia U using xda app-developers app
Mayank7795 said:
You don't need to unlock your bootloader in case of flashing stock kernels.
Unlocking bootloader is necessary to flash custom built kernels.
Sent from my Xperia U using xda app-developers app
Click to expand...
Click to collapse
OK, thanks.
Just followed the process and now it's rooted.
Congrats..
Now I would request a MOD to close this thread as the problem has been solved. :good:

Categories

Resources