please help
my device was automatic restarts
i am install hspl 3 and install rom shift pda
rom in 30% and other % but not succusfull.I am again install hspl3 and run hd2 hspl and succusfull install and power down bootlouder
now not bootlouder not device please help please.
jalal.arkat said:
please help
my device was automatic restarts
i am install hspl 3 and install rom shift pda
rom in 30% and other % but not succusfull.I am again install hspl3 and run hd2 hspl and succusfull install and power down bootlouder
now not bootlouder not device please help please.
Click to expand...
Click to collapse
bent battery pins?
Pin no battery problems. When I push power seem to believe that vibration, but will not boot and the HTC logo comes. Is it my phone completely Bryk and others will not start?
If there is a way to restore bootloader please help me I'm wondering who else I can not turn the phone
sorry for type bad english, i am use google transleter.
Related
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
hey man
try to post more info as
*your device(p3400 or p3400i)
*what was your spl
*what is your device serial(starts with "ht7xxx" or "ht8xxx")
and try to do this remove the battery and wait for a while then connect it again and then press and hold camera button meanwhile press and hold power button too and wait till you see a screen of three colors (green ,blue ,red) and then release .if this screen appeared so there may be a very good chance to get it alive again.
and try to post exactly what happened.
bye
is p3400
i think spl was for some other device
got it frm a frnd who said he made the rom
noo
it doesnt work no response
after the upgrade the device became dead
as i searched isaw somewhere that the spl was corruoted so plz help
hey man
your spl means the numbers that used to appear when your device used to start(in the HTC logo screen) try to remmember it!!!!!!!!
and what does your device serial start with? (ht7 or ht8) you can find it under the battery .
what the link of the rom upgrade you used?
and try the to press and hold both camera ,voice buttons meanwhile press the power button.
ok
bye
Hi check my post in wm6.1 for new gene thread on page 7 (post #63)
sebulu07 said:
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
Click to expand...
Click to collapse
serial
mine is 7x serial its starts with ht7.....
i have abig problem with my atome ,1st, bootloader it's dead already after i upgrade only OS ( not Exten, eboot,or radio) via SD card.but i can fix it by press
(camera+power on)in the same time with inserting battery,after it show MINI bootloader,then i try upgrade againe, but this only EXTENED rom.So it dead againe.and now i try as (camera+power on),(camera+reset) or anyway for fix,but it still dead.
so any body help.............
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
hi try this way
ShUvR0 said:
plz help me..i am facing the same problem...when i am upgrading my rom..now how i can do? device totaly dead...i can`t on my device..how i can ON power? anybody help me...
Click to expand...
Click to collapse
1st you must know that your divice dead or not?
try to understand this http://forum.xda-developers.com/wiki/index.php?title=Semi-Brick_symptom_ATOM_BRICK
2nd if you are sure that your divice dead try this
http://forum.xda-developers.com/wik...m_Exec,_Rover_G5,_Orsio_n725,_HP68xx_DeadBoot
Finally,the methode is very difficult to understand but you must know becuase its only one way to fix.Your divice is atome Ex so you have 2 way to do.Also you shoud be see my replyed too http://forum.xda-developers.com/showthread.php?t=336278&page=20
wish everything success but if not mail to me againe ill take some picture that i worked with my divice.
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
hi
ShUvR0 said:
I tested, my device...when i charged my device with battary itz orange light shown, but when i remove my battary from my device nothing happen...no light shown....now how can do?
Click to expand...
Click to collapse
Entering Bootloader Mode on Semi-Brick Atom
1. Remove battery for for at least 1 minute
2. Press CAMERA+RESET(stylus) simultaneously
3. Insert battery while still holding the buttons
4. Release the buttons at the same time (You should see bootloader screen)
tried this yet?
Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?
hiiiiiiii....
I've tried to install android on my htc hd2 through NAND but it stuck at htc logo after rom update through "rom update utility"....
now any body plz tell me what to do.....
thanks
Did you install HSPL 2.08 and a correct Radio ROM?
death screen
hmmm i think thats what they call death screen..??..but as i recall its all white anyways that hapened to me but not as android different rom to solve that problem it's either you press volume up and down hold then turn it on that would format it(it's easier if you remove the case)
or it could the rom your using try a different rom if that doesnt work for you just remember don't shut it down by removing battery it wont turn on if you do(unless you do step 1 ....FORMAT.
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
silvioslim said:
Hello everyone,
i have some problem with my htc hd2.
Just want to say sorry for my english in advance
I tried to star the phone in usb mode and no having problem. Flash it with cotulla HSPL 2.08 and works fine but when i try to flash the rom i having problem just because the process it's blocked on 1 or 2%.
I can tell you that the htc logo it appear strange with some black line. otherwise when i power on the phone in usb mode (it's impossible to start the phone normally) i see the standard 3 colors RGB and some information included new one that say: "upgrade rom code error, please try again".
what i should to try to resolve this problem???
Click to expand...
Click to collapse
what is it your trying to flash?
can you get it in to bootloader mode, plug it in to your computer so where it says "serial" in changes to "USB"
once in that you should try putting the HSPL back to a normal SPL, then install HSPL again. if your attempting an Android ROM, try installing a customer WM instead...