copy to 4n sspl 1.16
run sspl
cable unplug and plug
run hrdspl 1.22 niki
wait hard reset 100%
finaly run any language ruu
all done
Related
Never did anything before. Never unlocked.
Downloaded the official exe file today, update was in the middle, but the phone was freezed. I reset then stuck in bootloader.
TITA100 MFG
SPL-2.03.1000
CPLD-9
Then, I format my micro-sd to fat32, put the renamed TITAIMG.nbh to sd, use "Hold Power and Camera + Reset" to get into tricolor bootloader.
But, I can only get into bootloader tricolor screen, nothing more. Please help me, what I can do to make it load the TITAIMG.nbh? Thanks!
I tried let it at bootloader, connect it to xp, re-run the update, then the update told me not the right update for this phone. Any help?
try to get into bootloader, connect usb and see if tri color screen says USB...
then run olipro 2.40 bootloader install...unlock ur rom, then when thats done run the official rom install again, but redownload it incase u got a corrupted file
read from dcd thread
follow the step
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. flash flash-uspl-niki
the device will hard reboot ..
How can I make sure I can filash any rom ? is any way to check USPL is OK ?
The PC show me error[202] connection ....when I run TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship
qbell said:
follow the step
1. download the attached files
2. REMOVE SIM and SD CARDS !!
3. connect usb cable
4. copy sspl-1.16-nike.exe to your device and run it (usb cable must be connected!)
5. after a few seconds "USB" appears on the display
6. unplug and replug the usb cable
8. flash flash-uspl-niki
the device will hard reboot ..
How can I make sure I can filash any rom ? is any way to check USPL is OK ?
The PC show me error[202] connection ....when I run TOM_Niki-Project_WM6.1_WWE_16keys_signed_Ship
Click to expand...
Click to collapse
Enter into Booloader mode, you will see if you have SPL 1.15 Hard installed.
lyhuoth said:
Enter into Booloader mode, you will see if you have SPL 1.15 Hard installed.
Click to expand...
Click to collapse
Thanks . buT I do not use hardspl-1.15mfg-nike.zip ,,,
for flash-uspl-niki.zip , I also can see if i have SPL 1.15 Hard installed ?
qbell said:
Thanks . buT I do not use hardspl-1.15mfg-nike.zip ,,,
for flash-uspl-niki.zip , I also can see if i have SPL 1.15 Hard installed ?
Click to expand...
Click to collapse
you should see the version you flashed in bootloader mode. the default version in flash-uspl-niki.zip should be 1.16. anyway if you read the threat carefully you will see that 1.15 mgf is recommended to flash. make sure that you read all related posts before posting and performing anything.
lyhuoth said:
you should see the version you flashed in bootloader mode. the default version in flash-uspl-niki.zip should be 1.16. anyway if you read the threat carefully you will see that 1.15 mgf is recommended to flash. make sure that you read all related posts before posting and performing anything.
Click to expand...
Click to collapse
Ok. i see ..
EDIT: HardSPL v.1.15 (MFG - manufacturing) with rtask support now added. I highly recommend to install this version !!!
but 1.15 is hard spl ....
i want to try with uspl.....like soft spl...
My phone is stuck in boot screen,and can only boot in tricolor mode.Anybody know whether Mtty 1.42 or 1.16 can save the phone by formatting the rom and reflash a new rom? I tried as http://forum.xda-developers.com/showpost.php?p=934239&postcount=12 suggested with Mtty 1.42 and 1.16,but both failed and display
"Cmd>task 28
Invalid command : task 28
For a help screen, use command ? or h"
Can anybody tell me whether Mtty work for Oxygen? Thanks!
To fix your phone if its in the bootloader download this rom:
http://www.leaf.co.za/downloads/ROMS/Oxygen/Oxygen%20-%20P%20N%2099HCD064%20-%2024%20January%202007.exe
And flash it to your phone. It will then boot up in WM5.
This ROM has English and Russian.
To fix your phone if its in the bootloader download this rom:
http://www.leaf.co.za/downloads/ROMS/Oxygen/Oxygen%20-%20P%20N%2099HCD064%20-%2024%20January%202007.exe
And flash it to your phone. It will then boot up in WM5.
This ROM has English and Russian.
Finally i enbled the KTL Mode on my device i need a little help to flash radio
after 10 days of tries when my device was
IPL 1.04
SPL 2.03
KITL OME Disabled
No GSM
i sucsessed to made it
IPL 1.00
SPL 1.40 Olipro
KITL Enabled
now When flash the radio it stops at 7 % when i uese memory card and stops at 0% when i use Custom RUU i need any solution to flash the radio and i have windows CE 5 and KITL MODE on my device and i wnat to know when i reboot on KTL mode what is the option to select i have usb KTL transport and KITL Mode active and passive
how to flash radio using this mode
how can you enable ktl on your device?
flash it using rom wwe 2006
i need to enable kitl too,i flashed schaps 3.57a which is WWE wm6 and its a no go kitl.
Hello.
I tried to update with the ROM from SD card, but it failed.
My phone doesn't boot after that - it hangs up showing just splashscreen and some info -
ONBL 1.07.0000
SPL 1.10.0lip
GSM 02.71.90
OS 1.8.0.0
Hard reset didn't help.
I tried to flash ROM through RUU (device still goes into bootloader by pressing camera+reset/power), but it said
ERROR [200]: Invlid Update Utility
Please get newer Update Utility
Is there any way to flash my device? =\
btw, sorry for my english, i know that it's quite bad )
You need to first patch your HSPL and then flash a custom ROM.kindly read the ROM Upgrading Guide properly in the GENE forum.you can also find the link in my signature.
karan999 said:
You need to first patch your HSPL and then flash a custom ROM.kindly read the ROM Upgrading Guide properly in the GENE forum.you can also find the link in my signature.
Click to expand...
Click to collapse
If you are talking about that method -
Step 5: Use the Orefkov Unlocker
------------------------------------
1. Remove the battery, SIM card and SD Card of your phone and press the Power key for 20 seconds to draw out any residual power from the phone.
2. Replace the battery but not the SIM and SD card, and don't start the phone yet. Press and hold the Camera button and then press the Power button or Soft Reset button. Phone will come to boot loader mode (tricolor screen) and SPL 1.10.Olip will be displayed.
3. Connect the USB cable. The text USB will appear on the bottom of the screen.
4. On PC, go to the folder Orefkov in the folder extracted in step 1 and run the Mtty1_42.exe. Press the button "USB" in the window that opened.
5. In the window that opened, type the following command (don't use copy paste please) and press enter:
Code:
set 32 1
You'll see a response from phone.
6. Type the following command BUT DON'T PRESS ENTER YET:
Code:
ls boot.bin
Note : that is small L and small s in that command, dont mistake it with I.
Now, hold down the Camera button on phone, and press the enter key on computer. After a while, the screen will become White. Continue pressing the Camera button for 10 more seconds.
7. Now release the camera button, close the MTTY program and run ROMUpdateUtility.exe in the same folder, not the one outside it. That one is for RAM flashing that we will use later. Check the boxes in each step and click Next Next and then at last Update. Let it finish the process. Your phone will restart.
8. Now on the splash screen you'll see the info with updated SPL version. The version of SPL will be 1.07.Oref.
Congrats! you have successfully patched your SPL.
Click to expand...
Click to collapse
then it didn't work.
Mtty connects to the phone, it even says that bootlader patched, enters the "White screen" but RUU that is situated in the "Orefkov" folder says still the same: ERROR [200]: Invalid Update Tool
And btw, Orefkov method is for new gene only, am i right?
And I have an old one. And it's already have 1.10.0lip SPL, that allows custom ROM flashing.
LordOfFrost said:
And btw, Orefkov method is for new gene only, am i right?
And I have an old one. And it's already have 1.10.0lip SPL, that allows custom ROM flashing.
Click to expand...
Click to collapse
ya..Your SPL is patched and u have old gene
Now u can Flash Any custom rom from here(just No stock roms)
Problem was solved by deliting Active Sync, cleaning registry with CCcleaner and installing Active Sync after that...
I think that there was some driver problem or smthng >_<