Trying to flash 2.1 stock back onto my phone using Odin and it gets stuck at SetupConnection.
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
Click to expand...
Click to collapse
I'm in download mode. Any reasons why it might do this?
try a different version of odin
jmcghee1973 said:
try a different version of odin
Click to expand...
Click to collapse
Ended up using Heimdall...that was too easy.
Related
I tried to flash the new update with odin but i wont flash i get stuck at
<ID:0/003> Added!! <ID:0/003> Odin v.3 engine (ID:3).. <ID:0/003> File analysis.. <ID:0/003> SetupConnection.. <ID:0/003> Initialzation...
can anyone help when i try to boot back up i get the phone and computer i can get into download mode but can not flash anything.
Can anyone help me
Robert8457 said:
Can anyone help me
Click to expand...
Click to collapse
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
froze on you, just start over
badaphooko01 said:
whats steps did u take?
It worked great for me. Did you unzip everything to the same folder?
Click to expand...
Click to collapse
i put them on the destop and used odin but it gets stuck on ID:0/003> Initialzation...
the only way i can get into download mode is by volume down and power then plug it into the computer.
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
tenbeau said:
Perhaps you can try just shut down Odin and restart it and make sure you have the pit and the tar loaded in Odin before you connect your phone and go into download mode. I tried to flash the j16 leak a while back and it kept hanging up and I got the same screen that you have I just started everything over again and it worked. Did you click repartition?. I was told not to.
Click to expand...
Click to collapse
it did that could it be the drivers i am running vista 32bit
<ID:0/004> Added!! <ID:0/004> Odin v.3 engine (ID:4).. <ID:0/004> File analysis.. <ID:0/004> SetupConnection..
this is waht i get now
Mee too.
Windows XP :/
I dont no if it will help, but when i was having issues getting it to pass the set up/ Initialzation try to reboot the system then do odin before you do anything else on the computer, that worked for me. hope that helps.
I have a problem, i was attempting to odin back to stock and when i set up odin with the correct pit file aw well as the PDA file. When i click start on the odin window were it says message it says
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
and it stays there nothings happens, the phone doesn't boot but i could enter download mode. I tried multiple times checking re-partion and without, but no luck...
Any help????
try a different odin version?
xriderx66 said:
try a different odin version?
Click to expand...
Click to collapse
I did try different versions but the same thing happens.
Depending on which version of Windows you're using, you might try to "Run as Administrator"
Sent from my SGH-T959 using XDA Premium App
I tried a different USB port and it worked!!
It was a weird situation idk why it would matter but it did. Anyways thanks for the suggestions =]
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Just got my new samsung galaxy s3 yesterday and I have kies installed, usb drivers installed.. trying to install/flash CWM with odin.. think im doing everything right and by the book, following the instructions.. but thats the error it gives me.. anyone here that can help me troubleshoot?
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
great
jaidev.s said:
While flashing using Odin, make sure kies is not running.
Sent from my GT-I9300 with a BIG
Click to expand...
Click to collapse
great thanks had the same issue
Kies already wasnt running.. any other ideas?
bump. anyone? Please.
just gonna keep bumping
Herp?
Kies shouldn't run even in back ground. Are you sure your phone is in download mode and not in recovery mode?
Sent from my GT-I9300 with a BIG
Hello everyone.. I am trying to go back to TWRP 2.5.0.2 however odin keeps failing on me when it goes to Auth. any ideas as to why I am getting tired of the freezing in 2.6. I tried a zip that was supose to be able to flash recovery and now i get unauthorized software yellow triangle..phone still boots though. Oh and I cannot get ADB to work either says no devices..i do have the Samsung USB drivers installed
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Travisdroidx2 said:
Are you on mdk or me7 or MI1? You can only use twrp if you are on mdk.
Flashable zip of 2.5.0.2 if you are on mdk. https://db.tt/YeZ3cp4c
Click to expand...
Click to collapse
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Sidewind75 said:
I am on MDK. I can no longer access Recovery because a flashable zip caused it to say unauthorized software please return to verizon
Click to expand...
Click to collapse
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Travisdroidx2 said:
In that case sounds like you need to Odin back to stock mdk and start over. Just make sure it is mdk you are using.
Click to expand...
Click to collapse
As stated above I cannot get odin to work it keeps failing
Sidewind75 said:
As stated above I cannot get odin to work it keeps failing
Click to expand...
Click to collapse
Stupid question you are flashing it in PDA and not phone tab correct?
Travisdroidx2 said:
Stupid question you are flashing it in PDA and not phone tab correct?
Click to expand...
Click to collapse
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Sidewind75 said:
Yes I am sure..this is what I get
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> recovery.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Travisdroidx2 said:
Read post #2 here http://forum.xda-developers.com/showthread.php?t=2498818
I hope you used the correct file.
Click to expand...
Click to collapse
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Sidewind75 said:
I got it all fixed..not sure what happend but i just used goo manager to go back to 2.6 then used the zip you provided and im back on 2.5.0.2..thx again
Click to expand...
Click to collapse
Glad you got it up and running!
Hi all,
I need help to fix the S3 that i have here, model GT-I9300, I don't know what happened but I cant boot the phone it is stuck at Galaxy S3 screen, I can enter in recovery and Download mode but I am not being able to flash anything using Odin and KIES also does not work, what I have tried:
Flash stock room using Odin;
Flash TWRP Using Odin;
Update firmware using KIES, I do put the model and serial number but the KIES give a message that is not possible to start the process;
Odin fails in anything that I tried to flash:
<ID:0/006> Added!!
<ID:0/006> Odin engine v(ID:3.1101)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> SingleDownload.
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<ID:0/006>
<ID:0/006> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
If I enter in the recovery mode i saw a lot of red messages saying that is not possible to mount E: bla bla.
Any help Is appreciated.
Looks like a SDS
MGSGS said:
Looks like a SDS
Click to expand...
Click to collapse
I googled for it and seems that there is no fix for it... so, good bye
Tried different USB cables and ports?
audit13 said:
Tried different USB cables and ports?
Click to expand...
Click to collapse
Yes, also different computers, I think that it is a sds
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
audit13 said:
Confirmed the model # in download mode? Using the latest stock ROM from sammobile.com?
Click to expand...
Click to collapse
Yes, also tried to flash twrp, stock recovery, everything fails....