Related
first of all let me say that i've don a lot of searching before posting this, and i know it seems pretty long but please try to help me.
i got an x10i from a friend few days a go. the reason i got it (for free) was because it's not working and he didnt want to mess with it anymore.
when i first got it, if i tried to turn it on, the led would flash red. once in a while it got turned on, the sony ericsson text appeared for a few seconds and went off again. now if i try to turn it on the led would flash green for a sec, there is a vibrate but thats it. screen wont turn on at all.
i'f i try to connect it in the SE PC suite it detects it, but fails installing it. i've managed to enter the repair tool, but it failed a few times. however, the last time i tried to repair it said that it was repaired succesfully. still, not turning on.
tried to flash a firmware via flashtool, seems like its going well all the way but in the end it says "error flashing. aborted".
i'm pretty much out of ideas now, so ill really be grateful if anyone could help me.
a little update:
i've manged to flash a firmware via flashtool and it finished without any error, but still it won't turn. only the quick green flash and vibration.
any help will be appreciated.
ok, big update:
the phone is starting, i get past the boot animation and see the main screen (!) but after a sec or 2 the screen freezes and the phone shut down and won't start again unless i replace the battery?
please? anyone? im feeling so close yet so far away. could be a battery issue? when the screen starts i see that the battery is almost empty (connecting it to the charger won't help)
Yesterday i had the same problem ... i had to flash the hole firmware with X10Flash-2.1 and then updating with seus.. after this it restarts and it boot correctly
Not sure if u tried this, try having the phone plugged into the charger and let it charge for a while and then try booting it up again. Firmware wise, I would try a stable 2.1 or the freex10 beta 2.2 for a start to ensure that the software installed are stable ones. Hope this help.
try to fix it with seus...
nothing else willing to work as it seems there is something wrong a little deeper than flashable files...
This is I believe 1000th thread about this.
1. run seus
2. run PCC
3. run flashtool
Done.
SEUS seems to be the most effective way of repairing this.. Although you might also want to try pulling the battery before it freezes, it can help to recalibrate the battery.
Sent from my X10 using XDA and Swype.
thanks to everyone who replied.
i've downloaded and installed on the phone the version by SEUS, but i still cant turn on the phone.
in PC companion nothing is happening. when i go to the support section to get the new version, it just connecting with the phone and then tells to disconnect the phone and turn it on (which of course don't happen).
i've tried to run a repair in PC suite but it fails.
i've also tried to flash a firmware in flashtool, but it also fails.
any ideas?
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
simoking said:
Davinciteam.com .they sell you the original 1.6
Sent from my X10i using XDA Premium App
Click to expand...
Click to collapse
and how the 1.6 will help me?
and another thing: i'm using the versions under x10i generic here:
http://forum.xda-developers.com/showthread.php?t=920746
with the first and the third ones i get an error, but with the second i don't. however the device still won't turn on.
is there any chance that because i'm using win 7 64 bit it causes problems?
please?...
Ace_co said:
is there any chance that because i'm using win 7 64 bit it causes problems?
Click to expand...
Click to collapse
If i am not wrong windows 32/64 bit does not affect how ur phone is gonna be installed since the installer that is downloaded is for the phone only and the installation process will only be done by the phone itself.
Not sure if u tried a different software such as xrecovery to install the OS into ur x10, since xrecovery with freex10beta4 works for almost all of the users in here, it should work for u if ur x10 has no hardware faults. If all still fails, it might be most probably your x10 hardware has failed or something along those lines.
It work for me, then with the 1.6 you can after that update with seus to 2.1update 1. If your phone doesn't work anymore you have nothing to lose.
Sent from my X10i using XDA Premium App
the original 1.6 is on this forum also... please make some commercials somewhere else... k thanks...
4 out of the 9 posts u made had something to do with this website... could you stop please?
@the win7 part... you could get problems if you dont got the right drivers but it would tell you or error out...
the only thing what you could do in my opinion that is is short the pins while battery has been removed
this should effect total emptied phone and hopefully also the memory.... maybe than you are capable to flash/start it...
now if this wont work.. im sorry but im out of ideas and u shud use it to make a new barn or house ;/ im sorry
Didn't know the 1.6 was on the forum, thanks for the cue. I won't talk about that anymore.
Sent from my X10i using XDA Premium App
@ACE_co : I got the same problem. Can't use any SEUS, SE PC because it always fails when repairing. I even tried XIOFUB.rar to unbrick it to back to 1.6. It runs well and finish but with the info message within those commands
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLASS" ;ERR_STATIC="UNVALID_COMMAND";ERR_DYNAMIC="";
my xperia has the same problem, when I try to turn it on, a green light flashs, vibrate but it does not turn on I tried SEUS and PCC to repair but did not work, when I try flasher programs I see the
INFO: <<<ERR_SEVERITY="MAJOR";ERR_CLASS="PROTOCOL_CLAS S" ;ERR_STATIC="UNVALID_COMMAND";
İf you found a solution maybe you can help me
folks! I bricked my phone while updating it from seus and reason was dat MY USB CABLE WAS LOOSE AND MY PHONE GOT DISCONNECTED nw on restart it shows sony ericcson logo just for a second and den shows a pic where a triange(and inside it an exclamation mark is shown) is placed over a phone's picture.
I've tried seus and flashtool and both detect my phone as long as that sony ericson logo is shown and dats just for a second.
I was using cwm recovery and had made a backup of the custom rom. And nw i cant acces my cwm coz the se logo flashes so shortly dat i am nt able to open cwm.
NEED HELP GUYS!!!
Also i want to know dat can the sony ericsson service center help me..by software installation or by changing the hardware which stores the flash memory. Plz help me i'm nt ready to throw this phone away.
Thanks.
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
leajian said:
Use FlashTool to FLASH.
I have made a guide with links included. Just search for :
2.1.1.A.0.6 GREEK .ftf
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Dinesh1389 said:
Thanks buddy.. But Flash tool does not detect my device. I've installed gordons gate.. But still.. I think Flash tool does not get enough time to detect my phone. I hear a usb connection sound and SE logo flashes for less then a second and i hear a usb disconnection sound den the ! is seen and den phone shuts down.
Click to expand...
Click to collapse
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
No dont throw it just yet, I had almost the same. Ut unsure what caused it,it was 1st time flashing it, but spent 24hrs looking though solutions but it worked, similar to what lea sez...a new dl of sony comp and re-updated it using there latest u.d. Then used flashtool and reinstalled xrecovery with it as it stopped letting me open it..took a few trys but ws ok once sony companion recd my phone an reinstalled xrec.the update in sony comp I think wasnt in clear view its in the support stn..went back to stock 2.1.
Sent from my U20i using XDA App
leajian said:
Don't give up yet. I know this problem. Uninstall Gordon's Gate. Install Sony Ericsson PC Companion (again if installed) and try using FlashTool again. This error on your phone means that the files are corrupted, maybe because a flash you tried was interuppeted unexpectedly. Your phone is not dead yet (probably your USB port has some problems and caused all this), it must be restorable.
Try and tell me if it worked.
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Didnt worked man... So i had to choose the last option left ... the se service guyz... nw it back on the track.
Okay, so, ive never had problems with flashing things with flashtool until recently. My phone dosent stay in flashmode for more than 30 seconds and I frequently get flashing errors whenever my phone does stay in flashmode. Its getting really fustrating and I dont know if its the phone, computer or flashtool thats the problem.
Sent from my X10i using XDA App
Sounds like the phone's USB port?
Sent from my X10i using XDA App
It mounts perfectly fine and easily transfers stuff to and from the phone. its just flashmode that it dosent want to stay connected.
it might be ur computer anti-virus stuff or like firewall thing, try turn it off and flash it again. like my case, it did happen before, i thought i brick my lovely x10i, but somehow i figure out, it is nothing to do with the software, just because my usb port suddenly not working in the middle of flashing process. u can try restart ur pc, then everything should be ok. though they recommend not to close the flash tool if not completed the process yet.
I dont have antivirus. At all.
Sent from my X10i using XDA App
OK, so I tried rooting again;
The log went something like this:
Found xperia, no busybox installed
Preparing files for flashing
Searching xperia...
ERROR: USB/0xhsxuy and stuff
FOUND XPERIA USB/0xdgby
Flashing.... (time when phone exits flashmode.,)
ERROR FLASHING ABORTED..
God I hate this.
Sent from my X10i using XDA App
I had an issue where it kept aborting my flashes.
I fixed this by hitting flash first, and THEN connecting my phone (When i had it already plugged in in Flash mode, it aborted it).
Allright. Ill try this in the morning.
Sent from my X10i using XDA App
okay, so that didnt work at all. it did the same thing as before. it starts the flashing sequence then it immediately aborts flashing and my phone is out of flash mode. wtf.
Can anyone help?
Sent from my X10i using XDA App
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Painkille5 said:
hi guys i need your help A.S.A.P!!
I tried to restore my old version in my experia, because i got something very important written there that i need!
so i just entered the xrecovery and tried to restore..(not before i did backup)
the result now is the phone stuck at S.E's logo and keep rebooting till the logo.
when i tried to restore 1st, i waited some time and it didn't work (i dont remember what exactly it showed), then i tried to restore again and its writted:
E:Can't mount /dev/block/block/mmcb1k0)
(Device or resource busy)
Can't mount /sdcard
please guys i need you to help and to fix my phone and get my info from my old version, it is very important to me!
any help will be very appriciated, Thanks!!!!!
Click to expand...
Click to collapse
You have a faulty xrecovery installed mate!
Use SEUS to repair. Flashtool to root.
Once done, let me know. I have a safe, simple way of installing xrecovery (that works).
Also check http://forum.xda-developers.com/showthread.php?t=1054818
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Hl
Painkille5 said:
Hi mate thanks alot for helping me!
Just to let you know..I used the Flashtool couple of times before and it always worked. (even it said that it worked when I did backup)
I still got some questions before I do what you told me:
When I will use SEUS to repair - will it install the stock rom on my device?
Do you think that the flashtool did backup my current version and data?
and..after I'll install xrecovery again..will I have my last "restores"? (will I be able to restore?) because the info there might be more expensive to me than the device itself.
Thanks alot again!! I will start working on it as soon as you will answer me please again A.S.A.P.
Click to expand...
Click to collapse
Seus will reinstall 2.3.3.
Flashtool doesn't create backup.
Yes, if u made a backup through xrecovery, you can restore it.
But b4 installation of xrecovery let me know
Hit thanks if helpful.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Painkille5 said:
I ment that I used xrecovery and it worked to tell you that it was installked right, maybe something went wront but in first place it wasn't installed faulty.
and im looking for the SEUS, but i cant find any download for it, does the pc companion is good enough? (or maybe any 1 can give me a link for the download please?)
Click to expand...
Click to collapse
You can use pc companion too.
Check these :
gadgets.apnafundaz.com/2010/07/downgrade-xperia-x10-to-original-generic-firmware-using-seus-new-debranding-method/
ucanphone.com/sony-ericsson/sony-ericsson-xperia-x10-update-service-165.html
www.livesony.com/forum/search.php?searchid=139999
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Painkille5 said:
i tried to conect the phone and do something with pc companion.
since its stuck boot loop (phone rebooting till SE's logo and again..)i couldnt do anything but "repair/ fix problems" option in pc companion when i conect my phone, press on back button and enter buttery..
it still didnt work because it says the there is still no avialable program to use in my phone..and to try later..
any help please???
im already getting alot of dmg since im without my phone please help
Click to expand...
Click to collapse
You should contact doomlord
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
who is doomlord?
Painkille5 said:
who is doomlord?
Click to expand...
Click to collapse
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Dude!!!!!
He the who made this flashtool!!!
Search for his thread
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
aR_ChRiS said:
He didn't make the flashtool but nevertheless he's a great dev.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Painkille5 said:
ok guys he told me to flash the stock ftf
i have some questions, and i dont want to get on his nervs cuz he is pretty bussy..
he already told me that ftf is flashtool firmware file,and after some searching i understand that its a file that you put in the /firmware folder in the flashtool.
1.how will i be able to flash any file if my phone- not just stuck on SE's logo ,its keep rebooting!..?
2.what is UPS backup for PC??
3.how can i know how much batterty do i have or charging the phone? when i conect it to the charger the screen is still stuck on that loop so i dont even know if the phone is charning.
any 1?
Thanks!
Click to expand...
Click to collapse
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
milton.bain said:
Ups backup is required for ur pc so that in case ur current goes off in midway you dont endup in bricking ur fone.
Yes ftf needs to be placed inside firmwire folder.
Open flashtool.re.keep it running.
Shut down your phone ,connect the data cable to phone,keep the back button pressed and insert the data cable to usb port. Your led will turn green. Goto flash and browse firmwire folder to select the ftf file.
Enjoy flashing!!!
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
aR_ChRiS said:
Yes you can enter flash mode by removing the battery and plugging it in, hold back button then insert the battery.
Sent from my X10i using XDA App
Click to expand...
Click to collapse
thats what i said i already know..
can you answer me to the rest of my questions please?
Painkille5 said:
"in case my current"=my pc turns off? quit the process in midway? i didnt really understand.
i cannot shut down my phone because its turning on and off automaticly till SE screen..
i figured out how to flash by conecting in without the battery and, press back button while puting on the battery (i hope it will work)
"flashtool.re.keep" -what this means?
but my main problem now is that i cant know what is my battery status (you need at least 50%- so i cant flush untill i find a solution for that..)
any help please??
Tnaks!!
Click to expand...
Click to collapse
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Hi mate if you think you backed up properly from xrecovery and it still in sd card, use card reader to retrieve it to pc. The file should be under sdcard/xrecovery/backup/xxxxx.zip. then try recover it from working phone with xrecovery. Hope this help n good luck.
Sent from my SO-01C using xda premium
milton.bain said:
I mean, ups is required so that evem your power supply/electricity goes off, you can carry on your work.
You can use external battery charger to charge your battery only.
Before flashing,pull out your battery...as you said.
Last resort: if all fails, go to se service center, they will repair it. They use the same pc companion. When i tried to flash my fone earlier,i was a dumb fella. I bricked it. Took it to service center and got it fixed.
Before flashing, watch doomlord's video of flasing at least 4 times. Then read the instructions and flash, keep the video running and pause at required places. This is how i flashed successfully on next instance.
CheersS!
From X10i on ROM : "T.E.A.M. v3.5"
using XDA premium
Click to expand...
Click to collapse
thank you very much!!!
when i will find a way to churge my battery ill tell you what ended up with this!
Thanks!!
Well folks, my first question thread (Actually first thread started by me, ever). So first of all, sorry for any possible mistakes.I'll try to be as concise as I can, however it's hard with a situation as complicated as mine. I searched all around, and didn't find a case like this one. Well, I have this x10a, and after upgrading it to 2.1, it never booted again. SEUS reported a successful flash. It made it once to the homescreen,but rebooted soon after. Twice it stuck on the SE logo, now I only get the flashing red led. Phone charges the battery, and even with its own battery, charged either internally or with external charger, or other battery, it fails to boot. I can get to flashmode, but it seems to be stuck there. Sometimes it enters flashmode without pressing the back button However, it disconnects while flashtool or SEUS are trying to flash it. It flashes part of the .FTF and fails... I am no noob at this, and I've been pulling my hair over this phone for some 2 weeks...PC Companion recognizes it as a quite generic "Sony Ericsson Phone", and fails to start restoring it.
Help one desperate dude, please.
Thanks in advance
Sent from my LG-P920 using xda app-developers app
GRudolf94 said:
Well folks, my first question thread (Actually first thread started by me, ever). So first of all, sorry for any possible mistakes.I'll try to be as concise as I can, however it's hard with a situation as complicated as mine. I searched all around, and didn't find a case like this one. Well, I have this x10a, and after upgrading it to 2.1, it never booted again. SEUS reported a successful flash. It made it once to the homescreen,but rebooted soon after. Twice it stuck on the SE logo, now I only get the flashing red led. Phone charges the battery, and even with its own battery, charged either internally or with external charger, or other battery, it fails to boot. I can get to flashmode, but it seems to be stuck there. Sometimes it enters flashmode without pressing the back button However, it disconnects while flashtool or SEUS are trying to flash it. It flashes part of the .FTF and fails... I am no noob at this, and I've been pulling my hair over this phone for some 2 weeks...PC Companion recognizes it as a quite generic "Sony Ericsson Phone", and fails to start restoring it.
Help one desperate dude, please.
Thanks in advance
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Tey a differnt ftf and when you flash insert usb with battery out then while inserting abteey hold back
Sent from my X10i using xda premium
Do you have an unlocked bootloader?
As i understand you flashed with seus but it failed ...
This migth be a longshot but theres a forum thread in tjis Q&A stating that he could not fully flash (got inturupted)
But he solved it using wotan repair tool wich required a fee
Go find his thread and ask him for help if needed see if his problem relates to yours q
Sent from my x10 using xda premium
Link of thread
http://forum.xda-developers.com/showthread.php?t=1745308
Sent from my x10 using xda premium
My phone is fully stock. Bootloader and ROM are (were?) the factory-installed ones.I didn't even get to root the thing! Tried tons of different FTFs already. Could it be my PC, maybe? I don't have another machine where to test. I can enter flashmode removing and reinserting battery, but phone fails to flash. SEUS once flashed it nearly until the end, but failed at around 90%...What makes me wonder what happened is the fact that the phone was bricked by an official update!
Sent from my LG-P920 using xda app-developers app
was something more to do with my laptop environment than the phone. Because the Wotan client came with it's own driver, which my device loaded and used when I connected it holding the back button, this seemed to make the phone stay in flash mode when connected.
From this experience I don't think holding the back button puts an X10 into flash mode, it merely asks the host 'can I be in flash mode?' and either the host says yes or no.
In the post i linked so i supposw it can be driver related.
An in that post it got it to STAY in flash mode ... try looking for drivers on seus webpage
Sent from my x10 using xda premium
---------- Post added at 01:27 PM ---------- Previous post was at 01:25 PM ----------
what i found at first glance
http://www.akshayy.com/sonyericsson/tutorials/installing-usb-flash-drivers/
Will insist on it some more. Thanks a lot, Bjorn!
Sent from my LG-P920 using xda app-developers app
1 more thing i found
- While this process is running, please don't disconnect your phone from PC. If you disconnect the phone or the battery power is dropped then the process will be interrupted..... causing your phone unbootable!!
But don't worry because you can repeat the step above to re-flash your phone until the process complete.
so let the phone charge for about an hour or two to make sure if you can not check its status
hope you get it running again!
Well, I left it charging. It won't get worse, since its dead as a brick already. When I arrive home i'll finish flashing LG O2X, then i'll give the x10 some attention.
Sent from my LG-P920 using xda app-developers app
Well, nothing worked... Seems i have a bad eMMC/NAND chip. Any other thoughts?
Sent from my LG-P920 using xda app-developers app
Where can i get the frf fw files... all are on megaupload
Google yields some results. Try also searching on xda.
Sent from my LG-P920 using xda app-developers app