IM SORRY BUT IM NEW AND I JUST WANTED TO ASK YOU ABOUT Gingerbread 2.3.3 FLASHING IF JUST BEEN TO THE THREAD AND INSTALLED THE FILE ; AND TO THE INSTALL INSTRUCTIONS IT SAYS THAT I MUST FLASH BASEBAND AND THEN ROM VIA X RECOVERY SO HOW DO I FLASH BASEBAND???
I PUT BASEBAND INTO A ZIP FILE THEN I RENAMED IT TO UPDATE.ZIP BUT I DOESNT WORK PLEASE HELP
You then put the update. Zip in the root of ur sd card then you boot into recovery and you scroll down to install custom. Zip choose from sd card and click install
Sent from my X10i using XDA App
thnx
Yes iv tried that but it doesnt work so i flashed them via flashtool but i dont know if i have to wipe my mobile via xrecovery
ferrari4life said:
IM SORRY BUT IM NEW AND I JUST WANTED TO ASK YOU ABOUT Gingerbread 2.3.3 FLASHING IF JUST BEEN TO THE THREAD AND INSTALLED THE FILE ; AND TO THE INSTALL INSTRUCTIONS IT SAYS THAT I MUST FLASH BASEBAND AND THEN ROM VIA X RECOVERY SO HOW DO I FLASH BASEBAND???
I PUT BASEBAND INTO A ZIP FILE THEN I RENAMED IT TO UPDATE.ZIP BUT I DOESNT WORK PLEASE HELP
Click to expand...
Click to collapse
shahkam said:
You then put the update. Zip in the root of ur sd card then you boot into recovery and you scroll down to install custom. Zip choose from sd card and click install
Sent from my X10i using XDA App
Click to expand...
Click to collapse
guys at the moment baseband CANNOT BE FLASHED VIA xRECOVERY... u have to use flashtool for it...
only roms/themes can be flashed via xrecovery...
also after flashing baseband u do not need to wipe anything IF you will be using the SAME rom... in case u want to use a DIFFERENT rom only then wipe data/cahe/dalvik...
i am using falsh tool again but this time it stucks on PREPARING FILES FOR FLASHING i am trying to flash the latest ,any help would be nice..
How are you flashing. The baseband should have .ftf extension. Put that ftf file in the firmware folder of your flash tool and then flash and connect ur phone in flashing mode.
Related
any information why after I flashed 2.5.0.1-streak-clockworkrecovery ,the device can not update using the 2nd choice in recovery update using update.pkg on SD card ?
help pls
It't pretty simple! You've installed CWM! The Recovery partition is different now and the software that flashes the pkg files was there! To flash a pkg file You will have to flash original DELL recovery via fastboot!
maan1976 said:
any information why after I flashed 2.5.0.1-streak-clockworkrecovery ,the device can not update using the 2nd choice in recovery update using update.pkg on SD card ?
help pls
Click to expand...
Click to collapse
Mod recovery (like 2.5.0.1 ...) is for flash Custom Rom (Cook Rom, like StreakDroid 1.6 DJ ...)
Only Stock Recovery recognize Stock Update.pkg, but can not be used for Cook Rom
maan1976 said:
any information why after I flashed 2.5.0.1-streak-clockworkrecovery ,the device can not update using the 2nd choice in recovery update using update.pkg on SD card ?
help pls
Click to expand...
Click to collapse
This is a Question about CLOCKWORK RECOVERY and as such should have been posted in the Clockwork thread and not in Open Forum
Post Locked
Some1 know if it's possible to change the Baseband in xrecovery mode or installing something(apk)?
I want to install 2.2beta4 but I can't because my phone is not recognized by the PC, He only charges the battery
And although he can enter on the flash mode but isn't recognized.
So i cant updated pro SEUS or PC Comp. =(
NO, as stated in the other thread on the same page asking the same thing.
Sent from my X10i using XDA App
If u can't update with SEUS, u need to use flashtool for X10, just download the genetic ROM and install it, it's easy, no big deal.
I hope u can do it, cya
Sent from my X10a using XDA App
You can flash the ROM via xRecovery to get the latest baseband & kernel.
Is in general section, make a little search.
I could install via flash, the problem is that my phone is not recognized by the PC, that includes the flash mode
basically the only thing I can do is use the xrecovery, and acess the SD card.
so I stuck to the baseband version of .49.
anyway I think I found the post about it. Tehouster Thanks!
I found the post but need to install the .sin files by FlashTool anyway = (
kokes said:
I found the post but need to install the .sin files by FlashTool anyway = (
Click to expand...
Click to collapse
then flash this via xRecovery
http://forum.xda-developers.com/showthread.php?t=936462
Tehouster said:
You can flash the ROM via xRecovery to get the latest baseband & kernel.
Click to expand...
Click to collapse
You can use xRecovery for the FW, but the kernal needs to be flashed with the flashtool.
this is the post I had seen,
Although I can install the 435.zip with xrecovery
but not to install the 435_FT.zip because this is installed via Flashtool...
By the way, installing only the 432.zip, the baseband becames Unknown and will not recognize SIMCARD
XperiaX10iUser said:
You can use xRecovery for the FW, but the kernal needs to be flashed with the flashtool.
Click to expand...
Click to collapse
Yes.
Thanks for the info
kokes said:
I could install via flash, the problem is that my phone is not recognized by the PC, that includes the flash mode
basically the only thing I can do is use the xrecovery, and acess the SD card.
so I stuck to the baseband version of .49.
anyway I think I found the post about it. Tehouster Thanks!
Click to expand...
Click to collapse
Well, do u got installed PC companion? If not just install it, and the driver will be installed too, the just open flash tool, select the files u want flash, click on flash button and connect your device in flash mode and this time your system will recognize the device !!
happy flashing.
Sent from my X10a using XDA App
Hi I need help
I have just tried to add a custom rom to my xperia x10 but everytime I click install custom rom on xrecovery It says "replacing stock recovery with clockwork mod.." and is stuck there.
I am on original 2.1 firmaware version
and 2.1.54 baseband
And I want to install a 2.2 custom rom
I am a noob so sry if this is a stupid qustion. Could you help me please?
which custom rom you're trying to install? and on which xrecovery version?
and when you say you click on install custom rom you mean you click on install cutom zip right?
I tried to install the wolfbreakTW v007
and im on the xrecovery which you get from the flashtool.
and ye I clicked install custom zip.
did you follow all the steps exactly as indicated on the first page of the thread?
Also which baseband are you on?
1. Go to Xrecovery and make a Backup of your current ROM (optional but i suggest it)
2. make following in Xrecovery
- do a Factory Reset
- Wipe Cache Partition
- Format Cache
- Wipe Dalvik Cache
3. Install Custom Zip and choose Xperia_TW_V007.zip
4. Go to CyanogenMod Settings/User Interface/Tweaks extras and Select a theme and choose Xperia TW [For Custom Kernel you need to do this Method maybe]
5. Reboot
6. Enjoy
Click to expand...
Click to collapse
Then flash v007.1 update.
You need to be on baseband 54 or upwards for the stock kernel version
or BB52 for the custom version.
sfex3best said:
I tried to install the wolfbreakTW v007
and im on the xrecovery which you get from the flashtool.
and ye I clicked install custom zip.
Click to expand...
Click to collapse
Sent from my X10i using XDA App
.......
I unzipped the file on my PC....
So anyway do I keep the file as XperiaTW_007.zip ?
Just put the whole zip file on your sd card.
Goto xrecovery and choose install custom zip
Navigate to where you saved it on the sd card and choose it
sfex3best said:
.......
I unzipped the file on my PC....
So anyway do I keep the file as XperiaTW_007.zip ?
Click to expand...
Click to collapse
you shouldn't unzip the zip file
Yessss It Worked thank You guys.
You guys are geniuses this is so much faster
help, i can't get out of this rom
CWM won't let me flash other roms
giving me the amending scripting is no longer supported error
i tried installing xrecovery but couldn't even get into that
very lost and depressed.
frozenist said:
help, i can't get out of this rom
CWM won't let me flash other roms
giving me the amending scripting is no longer supported error
i tried installing xrecovery but couldn't even get into that
very lost and depressed.
Click to expand...
Click to collapse
Flash back to 2.3.3 stock ROM and then root via latest version of flashtool. You're permanently unlocked so don't worry. After root, flash doom's kernel/bootmanager via flashtool (unlocked bootloader kernels can only be flashed via flashtool), then flash disired ROM recovery. It's cake bro, trust.
trying right away
Let me know how it goes or if you need assistance.
Sent from my MIUI-FXP BackEdition using XDA Premium App
perfect solution, thanks alot!
Mr quipster... I can't mount my as card when I boot into xrecovery.. So I cannot flash any Rom ... Any solution for that???
Sent from my X10i using XDA App
I mean I cannot mount my sd card
Sent from my X10i using XDA App
clarance said:
I mean I cannot mount my sd card
Sent from my X10i using XDA App
Click to expand...
Click to collapse
Do you mean that you can't see any contents of the sd card when you're in recovery?
If so, then remove the battery and eject the micro sd card. My x10 has the same problem periodically because I've dropped it several times. But once you insert the micro sd card pack into its slot, you should be mounted when you turn it back on..
frozenist said:
help, i can't get out of this rom
CWM won't let me flash other roms
giving me the amending scripting is no longer supported error
i tried installing xrecovery but couldn't even get into that
very lost and depressed.
Click to expand...
Click to collapse
if you have unlocked bootloader then flash the DoomKernel for stock and you will get fully working xrec. then flash the rom you want!
JITv2 couldn't be installed
I tried to install JITv2 from xrecovery but it says that the script binary is not compatible with CWM v5 thought it's v2 of JIT...
so anyway to install JIT or a new package compiled compatible with CWM v5?
Thanks..
DAMIEN+OS said:
I tried to install JITv2 from xrecovery but it says that the script binary is not compatible with CWM v5 thought it's v2 of JIT...
so anyway to install JIT or a new package compiled compatible with CWM v5?
Thanks..
Click to expand...
Click to collapse
you can also install JITv2 via flashtool..
but maybe only support 2.1 roms..
you can have a try after have a completely backup
Then i need the JITv2.ftf or i ca use the zip one?
Dear Developer,
I've install Rom CM9.1 with CWM, but my phone wasn't running. IT's always at logo SONY. After that, I install back another rom, but the same thing, SONY always in my phone.
I don't know how to restore my phone?
I can only access fastboot.
Plz... Help me.
Wrong section.. Flash back use flashtool..
Flash the stock kernel with recovery and then a stock based rom.
Sent from my Xperia P using xda app-developers app
I can't find stock kernel with recovery, and When I flash Kernel, I don't know what's doing next? (Sorry my english not good)
What worked for me was:
Extract CM9.1 kernel from zip
Put zip on internal SD card
Flash CM9.1 kernel with flashtool
Reboot to recovery with flashtool (or press buttons until recovery starts)
Install zip from SD card
Creqaw said:
What worked for me was:
Extract CM9.1 kernel from zip
Put zip on internal SD card
Flash CM9.1 kernel with flashtool
Reboot to recovery with flashtool (or press buttons until recovery starts)
Install zip from SD card
Click to expand...
Click to collapse
I couldn't explain better. When you follow this step by step it should work!
Sent from my Xperia P using xda app-developers app
I've done to comback stock ROM. Thanks all!