Italian language - XPERIA X10 Q&A, Help & Troubleshooting

Hi There,
I have tried several ROMS on my x10i..and for some reason, Everytime I take the subway (basickly go out of service for 10+more mins) my phones language goes Italian. The on top of that, I cant connect to any network (and when I do search for networks, Italian ones show up). The only way I can resolve the issue is if I wipe the rom serverl times or restore it to factory. After about 20 mins of being in service if I'm lucky it will kick back in.
I live in toronto, Canada btw and mainly use freex10 beta 4 rom. I have 2.2.1 and baseband 2.6.54 Kernal: 2.6.29. Is there any points someone could give me?

Related

Atrix keeps restarting when making a phonecall

ok this phone a brand new, i can receive calls and text but when i dial a number and try to make a call the phone restarts
This is factory unlocked and not rooted
Try flashing a newer radio rom.
I dont want to root it incase i cant get the original rom back.
It is weird as, i have tried with every sim card to make calls and it works but when i put the 3 sim in does plays up
We experienced the same issue on some Turkish networks as well and flashing a newer radio rom fixed the problem. Flashing roms and rooting are totally different. What you need is a newer version of your current baseband ( radio rom ) sbf and official motorola software flasher " RSD Lite 5.3 "
Hope it helps.
Thank you so much for that Semseddin.
My problem solved, i just flashed it using RSD lite 4.9
Thanks everyone
Hi. I've been having the exact same issue. I've got an unlocked AT&T Atrix and I'm trying to use a Three UK sim (I'm in the UK). I'm a bit new to the world of android, can someone post a link to an appropriate Radio Rom?
Thanks for any help!!
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Why is it always 3 that cause a problem?
When the Nokia N900 came out, that wouldn't work with 3 initially until a couple of updates later!
lowndes783 said:
OK after a little more web searching I've found a (sort of) solution -
"Here's a quick fix for it thou, (not permanent)....
1. type *#*#4636#*#* on the dialer
2. Chose Phone Information
3. Set preferred network to GSM only
Viola...its fixed
problem with this fix is that you wont be able to use your 3G network but the dialer should be working."
Problem is of course that you can't use your 3G connection. Hope this helps anyone else with the same issue.
Link to article - https : // supportforums.motorola .com/message/379232
Click to expand...
Click to collapse
May not work for Pay as you go? I didn't think that it had 2G fall back?

[Q] Bought chinese sII and having some problems

hello,
i just recently bought my SGSII in China and i'm unable to navigate certain apps because they're in chinese and i cant read chinese letters. The android market for example wont let me change the language to english. Factory reset sets everything back to chinese letters.
i have android version 2.3.3
baseband i91999xxke4
and build number xwke7
i dont think my phone is locked to a certain provider/telephone company, im using a prepaid SIM
Is there a way to change my firmware/kernel/whatever (sorry, im new to this phone-hacking) so i can reset it to an international version and can access the android market through my VPN client in english?
Would someone be so kind to point me in the right direction to flash my phone with the right software?
Thank you in advance
Follow these directions and see if it works...
From the homescreen, press the Menu key and go to Settings. That would be the item with the gears icon.
Now you need to go to "Languages and keyboard". Since you can't read the label, this is the one with the icon that looks like the "A" keyboard button.
Select the first item on the list and see if English is one of the items you can choose.
thanks for your reply.
the thing is, i have done that already. so all the menues are in english, but most of the apps stay chinese... i cant delete them and i cant change the language of them (i let my chinese friend read through, and he didnt find the option to change it)
so i was thinking of flashing my phone to some international version of android, so i can access the global android market, not just the go-market for the chinese market.
thanks anyway any other solutions?
probably u can root it and flash with a European standard ROM. not sure about the mobile wifi after that but backup everything before u do it....
Better if you flash something like Litening rom where you don't have to go in rooting and all to flash the rom
thanks so much, man! once i get those friggin' USB-driver working, i will go with Lite'ning ROM - looks very easy to setup

[Q] not registered on network. Galaxy 2

Hi.
I have a big problem with my G2, and have tried many things.
It all started 2 weeks ago. I lost connection to my network.
I tried many things, and ended up giving it to a repair shop, in China, as I was there shortly. They put a new firmware into the phone, and a chinese SIM card worked.
I found an english version of the firmware, and asked them to update with that version, No problem. Everything worked well...but when I arrived back to Denmark, same problem. Not registered on the network.
Now I have tried many things, as Kies could not recognize the firmware version. I burned a 2.35 version into the phone with Odin, and Kies regocnized the version, and now updated to 4.03. Great, but ... I have the same problem. APN settings acc to my network provider. Oister 3 in Denmark.
I really have no idea what to do anymore. And I cant send it in for repair, as the flash counter says 10 times.
Is ther someone here, with a very deep knowledge in Logs etc, as I can send Logs if I am explained what to do.
The short time the phone worked, did I really love it.
And also the chinese SIM can not connect from Denmark.
I would prefer all Logs etc in private email, but if we solve it, I will poste solutions and results here.
Best of regrads
Morten
As for the counter, install and run triangleaway - it can be found in the SGSII section of XDA.
Check that the sim card works (try it on another phone) and borrow another sim card (on the same network). It is amazing how many problems like this are due to a damaged sim card or just not connecting correctly. I had a friend who took the sim card out to flash their Samsung Galaxy 3 and put in the sim card wrongly and couldn't make a call.
Can you copy your contacts to or create one in the sim card?
I doubt that it is a problem with the EFS folder, ie no IMEI number because it was fixed with a china sim, but it may be. Is the IMEI number you get from dialing *#06# 004999010640000 or different from the label under the battery? If so then you have a EFS folder problem. There is an app that may fix it - it requires root - * HERE *
Mobile network
Hi
Thanks for the reply.
A:
I can make, copy, edit etc contact directly at the simcard in the phone, and also copy, edit etc from Kies to the Sim card. And yes. It is the simcard I can do those things at. Double checked that it was somcard and not the phone memory
B:
Double checked the IMEI number again.
Label phone same as *#06#
Further information:
In the first day, I tried many many things to get the phone working.
I searched the internet a lot, and I found some kind of help. Like with IMEI check, I should type a code like *#xxxx# or *xxxx* Stupid as I was, I did not write down the code, and also did not safe the page on the internet, so I have no idea what code I wrote. I am sure it was something regarding Mobile network or CSC.
Reg Triangle away.
My phone is no longer rooted, as I try to have it in original mode, so its ready to send to repair, if needed. Triangleaway needs the phone to be routed, right ?
And will that not require an unsafe kernel ?
After resetting, then I suppose I need to install an original kernel again, and will that not make the counter go to 1 ?
Any other ideas ?
Regards
Morten
can you be little clear....
no network or no data (internet) on your current network
1: do you have a locked phone or unlocked. [carrier locked when new]
2: no network will be no signals at all, no phone call....
3: no data will be you cant browse, send receve emails
4: counter can be fixed easy as now your on ics
Hi,
I got the same problem but different scenario
atifsh said:
can you be little clear....
no network or no data (internet) on your current network
1: do you have a locked phone or unlocked. [carrier locked when new]
2: no network will be no signals at all, no phone call....
3: no data will be you cant browse, send receve emails
4: counter can be fixed easy as now your on ics
Click to expand...
Click to collapse
1. my phone is unlocked(international).
2. signal show full, but no phone call
3. I don't use data, but wifi, and no problem with wifi.
Well, this : not registered on network only happen if phone idle for more than 3hrs, meaning phone just work normally if I don't let it idle for long time. This very frustrating as every morning after wake up I have to switch between airplane mode for phone working again.
Greatly appreciated for your help
Thanks in advance
P/s: currently on Slim rom(cm9). But have tried almost all custom rom found in xda, problem still exist. Even try to change CSC to my current country( Thailand) on stock DL7( included Thailand region), no luck. APN setting also change to default network provider.
Mobile network problem
Hi.
Please see my answers below
1: do you have a locked phone or unlocked. [carrier locked when new]
The phone worked before, and was not locked, but as I send a command to the phone, could I have locked it ? How can I check that ? And it does not give me any warning when I start the phone up.
When I try to make a call, it right away says: Dialling ...Call ended.
2: no network will be no signals at all, no phone call....
No mobile network. It is ONLY a problem with phone calls and reciving calls.
I have plenty of signal
3: no data will be you cant browse, send receve emails
Data is right now not working, WiFi works.
I cant get correct APN settings, as my provider sends this as system configuration to the phone, but cant recive it.
3A: My provided is named 3 Oister, and normally this provider is listed under Network operators. On this phone it is NOT listed. 3 Oister is using network of 3, and only network of 3 is listed.
If I pull down the menu from the topbar on the phone, it actually says 3 Oister, but 3 Oister is not listed under Network Operators.
On my other SG2, 3 Oister is listed in Topbar and under Network Operators.
I bought a new SG2 as well, and we are 2 persons using SG2 here.
4: counter can be fixed easy as now your on ics
How ? Can I do that without rooting and install different firmware ?
I do run ICS ver 4.03, updated by Kies.
In worst case, I will send the phone in for repair, but for sure, needs the counter reset.
Regards
Morten
Put a new firmware in the phone then probably wrong modem and CSC for your location .
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Rom counter for ICS use the search tool for the relevant post .
jje
Mobile network problem
Hi
Please find answers below:
Put a new firmware in the phone then probably wrong modem and CSC for your location .
As my counter says 10, you can see, I have tried this several times, and its also written in my first post.
Please send the code for check of CSC and changing CSC. As I remember it is set to be NEE.
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Chinese SIM works all over the world, as long as Roaming is allowed. And it works in the other phone. Now I have the Denmark SIM in, and same problem. Yes, I did close down the phone, changed SIM and started the phone again. Exactly SAME problem.
Rom counter for ICS use the search tool for the relevant post .
Would be nice to have the info written here instead.
regards
Morten
SG2Denmark said:
Hi
Please find answers below:
Put a new firmware in the phone then probably wrong modem and CSC for your location .
As my counter says 10, you can see, I have tried this several times, and its also written in my first post.
Please send the code for check of CSC and changing CSC. As I remember it is set to be NEE.
Chinese sim unlikely to work 4000 miles away but that is easy to swap sim .
Chinese SIM works all over the world, as long as Roaming is allowed. And it works in the other phone. Now I have the Denmark SIM in, and same problem. Yes, I did close down the phone, changed SIM and started the phone again. Exactly SAME problem.
Sim CSC Modem . Firmware .
Then your answer is hardware fault if above are ruled out as not a problem.
Rom counter for ICS use the search tool for the relevant post .
Would be nice to have the info written here instead.
Sorry i refuse point blank to search for someone else .
Neither do i have the relevant post bookmarked otherwise it would have been posted .
jje
Click to expand...
Click to collapse
SG2Denmark said:
Hi.
Please see my answers below
Regards
Morten
Click to expand...
Click to collapse
try this before you send for repair.......
get this stock for your network
http://www.hotfile.com/dl/149692036/21dfd27/I9100XXLPQ_I9100HTDLP3_HTD.zip.html
1: forget all your idea's do exact as i say
2: remove your sdcard
3: using cwm format system, cache, data, sdcard [system is a must]
4: remove battery / insert back goto download mode
5: flash the ROM you downloded using odin, after restart dont do any restores
6: wait for few minutes now dial this *2767*3855# [important]
dont restore any backups including titanium stuff.
if your phone works now put your sdcard back and do whatever now you want.
---------- Post added at 04:29 PM ---------- Previous post was at 04:24 PM ----------
Saisuay said:
Hi,
I got the same problem but different scenario
1. my phone is unlocked(international).
2. signal show full, but no phone call
3. I don't use data, but wifi, and no problem with wifi.
Well, this : not registered on network only happen if phone idle for more than 3hrs, meaning phone just work normally if I don't let it idle for long time. This very frustrating as every morning after wake up I have to switch between airplane mode for phone working again.
Greatly appreciated for your help
Thanks in advance
P/s: currently on Slim rom(cm9). But have tried almost all custom rom found in xda, problem still exist. Even try to change CSC to my current country( Thailand) on stock DL7( included Thailand region), no luck. APN setting also change to default network provider.
Click to expand...
Click to collapse
next time start your own thread........ this time im helping
do as i posted for the OP but instead of his firmware download your country specific firmware.
seems as a modem issue but can be sim related.
Mobile network problem
Hi again
Followed the guide very detailed
3: using cwm format system, cache, data, sdcard [system is a must]
Wiped all data in System and also Wiped Cache, using:
Root the Samsung Galaxy S2 GT-I9100 running XXLPQ firmware and install ClockworkMod Recovery: CF-Root-SGS2_XX_XEO_LPQ-v5.3-CWM5.tar
Done with Super User Granted.
4: remove battery / insert back goto download mode
Done
5: flash the ROM you downloded using odin, after restart dont do any restores
Flashed with Odin 1.85 in PDA: I9100XXLPQ_I9100HTDLP3_I9100NELP2_HOME.tar.md5
6: wait for few minutes now dial this *2767*3855# [important]
Done. Phone shows Factory Reset in big letters
dont restore any backups including titanium stuff.
Nothing restored.
Booted up, and automatic installed APK's
Same problem.
Only difference is that now the counter says 11 counts
But thanks for a detailed and well told possibility.
As I see it, the problem is connected to the standard the phone connects to the Mobile grid. As I told earlier, I made a stupid thing. I send a command with *#xxxx* in the phone, and I cant remember what code, and I did not save the page on the internet. I really think the problem is about a standard. That the phone is setup to a standard that the 3G net is not using in Denmark.
I can dump logs etc, if anyone can help. But I need to know how.
Regards
Morten
buddy your problem was.... network right? is it working now?
forget counter it will be fixed....later using triangle away with ics bootloader
---------- Post added at 12:06 AM ---------- Previous post was at 12:01 AM ----------
if your phone now works fine with calls send and recieve, manually add the apn to get 3G.
Mobile network problem
Hi
Nope. Did not solve the problem.
Just ran Triangle away, and moved the Firmware: I9100XXLPQ_I9100HTDLP3_I9100NELP2_HOME.tar.md5 to the SD card.
Will try now to install it by CWM
And then I give up. Will try to send it for repair ..... really a shame, as I really would have liked to solve it here
Cheers
Morten
Mobile network problem
Hi Buddy
It finds a lot of Networks, but cant connect to any of them
3 networks with 3G and 4 with 2 G
But not the Mobile network I need to connect to> Oister 3
My other SG2 finds that network without any problem
Cheers
Morten
I had the same problem too. At first I tought it was a rom issue, but it wasn't actually. I turned my phone off and removed and placed back my sim card and it worked.
Mobile network problem
Finished programming original firmware using CMW as source for Odin, after counter was reset to 0, and the pnone status is the same as before, but counter is 0.
So will try to send it in for repair.
Thanks to u all.
And SIM card has been removed several times, even tried with a different.
No luck at all
Cheers, and thanks again
Morten
Did you ever get to the bottom of this?
I've been using my phone in Brazil and now i'm in the UK, it's doing exactly as you describe.
...
How would you go about checking these?
Escy said:
How would you go about checking these?
Click to expand...
Click to collapse
Compare the IMEI that displays when you type *#06# to the IMEI printed on the label under your battery. They should be the same.
For your own sake, do NOT post what the IMEI under the battery actually is, whether it's the same as what's displayed when you dial *#06# or not.
As for checking IMEI blocking by the carrier, that should be obvious. Call your carrier.

Net lock with every custom ROM

Hi guys,
to make a long story short: No matter which custom ROM I try, my SIM is always denied.
Provider: German Telekom (D1 Xtra)
Now even if I restore back to stock with SEUS, I'm having Problems connecting, need to reboot several times, restoring to factory settings to get sometimes lucky to get network.
Sim is OK, I tested with iphone and and old Nokia Navigator. And the X10 Mini is from Amazon and has always been unlocked.

[Q] No Service/Network?

Hi all Trying to help a mate with a phone he bought, He said there was no network service so I asked him to drop it off to me. I have tested it with my sim (EE) and I get no network service too. I have checked both IMEI numbers to see it is blacklisted/ blocked and it doesn't appear to be, they are both the same but for the last three digits 001 and 019 respectively. the 001 is the one that is shown on the back of the battery.
The version infos is as follows:
Model Number: P780_ROW
Android Version: 4.2.1
Baseband Version: P780.V20,2013/07/31 10:51
Build Number: P780_ROW_S115_130807
The phone appears to be in very good condition, it looks brand new. If the SIM is placed in the 3G/2G slot Slot 1(the slot nearest the red reset button, the SIM isn't seen, if its put into the 2G sim slot the SIM is seen and under SIm Management I can see The SIM Network Brand ie O2 -UK, the phone number of the SIM and Data Connection is in black but messaging and Voice Call are greyed out and faded.
The default language is English US so I am assuming this is a US phone because there are no other languages available.
I have tried a factory reset, a soft reset and looked at a hard reset but when it goes into the menu for hard reset the menu is in what I think is either Chinese or Taiwanese, well its definitely oriental so unless I known the sequence the menu is in I can't really chance screwing it up, plus the menu order may not be the same as in English.
Any help would be great
Did you tried flashing other basebands or any ROW firmware? If not please check my topic. If your problem still not solved, then it's probably hardware issue, need to send back to service center fro repair.
Hi thanks for the reply soralz, I will read your topic and try flashing different basebands I have a bit of an understanding as I have a Galaxy Note that I'm going to load up with Cyanogenmod 11 (Kitkat 4.4)
I'll read up on ROW Firmware first and try that if the basebands don't work.
Ok am I on a Chinese base because of what comes up if I Press the power and volume up buttons together, because I get Chinese text? and if I understand it right that means I need ROW firmware that is based on a Chinese base?

Categories

Resources