I flashed andy's gb rom rc1 and was happy with the rom, only thing I missed was overclocking...so I flashed mik's v1.1 kernel.
Will this harm the phone in any way? Pls tell me, else I'll reflash the rom...
Instead is the kernel .zip available? so I wont have to reflash the rom. I am aware tht andy will be releasing a modified kernel soon with miks oc features.
But in the meanwhile I dont want my phone to have any adverse effects.
Thanks
guru_urug said:
I flashed andy's gb rom rc1 and was happy with the rom, only thing I missed was overclocking...so I flashed mik's v1.1 kernel.
Will this harm the phone in any way? Pls tell me, else I'll reflash the rom...
Instead is the kernel .zip available? so I wont have to reflash the rom. I am aware tht andy will be releasing a modified kernel soon with miks oc features.
But in the meanwhile I dont want my phone to have any adverse effects.
Thanks
Click to expand...
Click to collapse
You should notice a lot of bugs now that yo uflashed mik_os 1.1 ancient kernel . Like black screen bug , reduced performance , probabily no 3d/2d , freezes ....
Thanks @zerobarat1 for the quick reply..
Actually the performance isnt much diff, running it at 729 makes it faster actually. But yes the black screen is bugging
So,
How do I go back to original kernel without reflashing the rom....I hadnt created a nandroid Is there a zip? I read the whole gb thread and have been following them for a while...afaik I couldnt find such a zip
Anyway Im waiting to see if andy releases his updated oc kernel today, it will save me the trouble of reflashing whole rom as opposed to just flashing new kernel over current one
Reflash the ROM without wiping.
Related
does anyone here uses a custom rom with a stock kernel? will it still be good? i really do want to flash but i don't want things to get complicated. i just want to speed up the phone.
and with stock kernel everything is simple right? just flash the rom and use it, no other things needed.
I am one of the unlucky people that have a vibrant that cant handle an OC/UV kernel. So yes, every time I flash a custom rom, I flash a stock kernel. Generally speaking most roms I use ( bionix and master ) barely increase the benchmark scores of stock tw... though they do feel snappier because these rom chefs spend alot of time in polishing the user interface... if you want to make your device faster, try rooting it and installing a lag fix. If you have any other questions be sure to click the red text in my Sig.
You do not need a lag fix... too many issues stem from this.
s15274n said:
You do not need a lag fix... too many issues stem from this.
Click to expand...
Click to collapse
i already flashed a fusion 1.1 stock kernel. i'm satisfied already.
Awesome, just making sure. I didn't agree with the lf suggestion.
If you've flashed Bionix Fusion 1.1 with JACS OC/UV ROM from stock, do you need to flash another kernel or does the ROM include the JACs kernel? Without SetCPU do you then run stock benchmarks?
3rd Q, are there issues flashing back to a custom ROM but with the standard kernel?
pathcafe said:
If you've flashed Bionix Fusion 1.1 with JACS OC/UV ROM from stock, do you need to flash another kernel or does the ROM include the JACs kernel? Without SetCPU do you then run stock benchmarks?
3rd Q, are there issues flashing back to a custom ROM but with the standard kernel?
Click to expand...
Click to collapse
to your 3rd question, if you have a custom rom with a stock kernel you can flash back to stock rom without problems using odin.
Thanks. Plus found discussion of kernels under Vibrant Q&A under "Bionix fusion 1.1".
Wil it work?
My phone=Rooted,2.2.2,clockwork recovery done....
It works.
You will have to root etc. before you can flash new kernel.
Jackmax32 said:
Wil it work?
My phone=Rooted,2.2.2,clockwork recovery done....
Click to expand...
Click to collapse
u may face prob so dont think of flashing his kernel on stock u may get performance issue
Before flashing, do nand backup
shhbz said:
u may face prob so dont think of flashing his kernel on stock u may get performance issue
Click to expand...
Click to collapse
Have been running his kernel on stockrom for a week now, just as a test, phone is more responsive, no problems, running fine on 749Mhz
Wil go back to LOL 1.4.2 which I find one of the best for the moment.
When bluetooth headset works on Miks CM7 I will switch to that
Seems like franco.kernel v10 is not happy with my stock rom...Neocore and quadrant score increased but there is a slight lag when playing games(eg angry birds lag a little more with this kernel as compared to sipollo's kernel)..may be its coz of stock rom..back to sippolo's kernel until further update from franco..
Well, you can't blame he, the kernel was made for his custom rom
dieguchoel said:
Well, you can't blame he, the kernel was made for his custom rom
Click to expand...
Click to collapse
That is true. He is making the kernel for his ROM. However, I have noticed other ROM developers using older versions of his kernel. I hope his kernels will continue to be somewhat compatible with other ROMs. He is doing great work!
Someone trying v11 on Void rom? Is it vorking? Thanks
Jackmax32 said:
Wil it work?
My phone=Rooted,2.2.2,clockwork recovery done....
Click to expand...
Click to collapse
you can try it..but you do a backup before the flash..
I flashed v11 over stock ROM (v10e, 2.2) and didn't see any problems.
Flashed Franco v11 kernel on stock rom,seems like the battery backup has increased a bit. Much better than the stock one.
haroonak said:
Flashed Franco v11 kernel on stock rom,seems like the battery backup has increased a bit. Much better than the stock one.
Click to expand...
Click to collapse
Can you please explain what is better on Franco v11 kernel over stock? So I know should I install it...
Hey i got a Big a** problem here i tried to go back on fk 18.1 (wiped dalvik and battery stats) and i flashed it but then it loads but right before the bootanimation the screen remains black but the phone ends loading fully i mean when you unlock the phone it vibrates right well it does vibrate so it tells me that the phone is working but the black screen doesn't go away
after seeing this i wiped and flashed MIKOS 6.6 2.3.4 ROM and i didn't flash franco's kernel and then it worked perfectly so then i flashed the kernel again (FK 18.1) AND AGAIN THE BLACK SCREEN BEFORE BOOTANIMATION! so cant use the phone :/ why the hell is this happening?!!! Help me
Which kernel are you using, I believe CFS is for Gingerbread only and BFS is for froyo, or it might be the other way around, I ended up running through the same problem, I just wiped everything, ie...dalvik,cache ( you get the picture) and reflashed the kernel, I used v18 cfs ( I believe) but make sure you do a backup, I had alot of problems using Clockworkmod's recovery so I switched back to AmonRA and Ive had no problems, Ive read that it's not recommended to use Rom Manager so just do the search for flashable custom recovery
Jrhodes85 said:
Which kernel are you using, I believe CFS is for Gingerbread only and BFS is for froyo, or it might be the other way around, I ended up running through the same problem, I just wiped everything, ie...dalvik,cache ( you get the picture) and reflashed the kernel, I used v18 cfs ( I believe) but make sure you do a backup, I had alot of problems using Clockworkmod's recovery so I switched back to AmonRA and Ive had no problems, Ive read that it's not recommended to use Rom Manager so just do the search for flashable custom recovery
Click to expand...
Click to collapse
oh i remember i did a nand back up and BFS is for gingerbread CFS froyo but feedbacks claim that cfs is better as i said i was using Franco's kernel v1 Gingerbread last updated and i tried to go back to 18.1 which doesn't have the black screen bug problem anyways thanks for replying bud, i'll restore the nand backup!
What you want to do?
If you are using Mik 6.5.5 you have to stick with FK 18.1. There is no such issue. if you are using Mik 6.6 test release then use FK Gingerbread kernel. There is no such bug. You can not flash Fk 18.1 on Mik 6.6. You will find same problem.
franco's rom doesn't support ipv6??? is it?
williamcharles said:
franco's rom doesn't support ipv6??? is it?
Click to expand...
Click to collapse
There is no useful support for IPv6 in Android.
fernando1sg said:
oh i remember i did a nand back up and BFS is for gingerbread CFS froyo but feedbacks claim that cfs is better as i said i was using Franco's kernel v1 Gingerbread last updated and i tried to go back to 18.1 which doesn't have the black screen bug problem anyways thanks for replying bud, i'll restore the nand backup!
Click to expand...
Click to collapse
6.5.5 is based on kernel 2.6.32. mik's 6.6 is based on 2.6.35. fk 18.1 is based on 2.6.32!! 6.6 ROM cannot support a kernel then gingerbread..i.e., 2.6.35!!!
shashi_hv said:
6.5.5 is based on kernel 2.6.32. mik's 6.6 is based on 2.6.35. fk 18.1 is based on 2.6.32!! 6.6 ROM cannot support a kernel then gingerbread..i.e., 2.6.35!!!
Click to expand...
Click to collapse
alright thanks for replying
Fraco kernel GB causes problem with my P500...
I tested with rom CM7 miks, and now with rom void #forever
After to flash franco kernel, USB doesnt work.
I recently installed the endv2.5 rom and it was oc so was a bit nervous about it as i know it can damage the phone. I have a wuestion and a request.
First, What are the dangers of oc your phone and has any of them happened to you (are they common)?
Last, can anybody post a link to where i can find a non oc kernel for the endv2.5 rom?
Thanks
as far as I know only CM7 Kang by vo-1 is the only one that has a non-oc kernel.(if i remember right)
aaand ATM there is NO STABLE OC KERNEL so it can fry your motherboard, brick it beyond repair, and with taking the risk of OC-ing u changed to custom and custom rom pones are warranty voided so pretty much your ace will be killed at high frequencies. (stupid samsung OC'ed ace's processor but wont let us OC it >.<)
ok so dont oc the phone lol i dont see why dev's oc them if its do dangerous.
Where can i get a Kerenl to flash that is not oc'ed.
There are a list of kernel's here (http://forum.xda-developers.com/showthread.php?t=1439516) but not sure which one to use?
Flash the zImage-Mod v1.0 (1.0 is better then 1.1).
where is the zimage and what does it consist of
just had a read of it and seems good.
It is non oc ye?
and are there any bugs or problems with the v1.0 kernel?
No bugs, works perfectly, should work on all CM based rom's, and it doesn't have OC.
im kinda nervous to do this lol
if it doesn't work can i just simply reflash the rom am i using and the kernel will be restored?
and how do i open govenors?
Weeeman said:
im kinda nervous to do this lol
if it doesn't work can i just simply reflash the rom am i using and the kernel will be restored?
Click to expand...
Click to collapse
Backup before u flash anything just to be safe
thanks. Tried it out and works fine though i have backups if anything happens
Sorry for my bad henglish but i need help
I have a serious problem with the touch screen and custom rom. With the CM9, CM7 and MIUI, and its kernel, touchscreen does not work! But if I use the stock rom and kernel the touch screen works, or if I use the official ICS kernel beta with ICS Rom: KA15 Team Ice Cream or Sony Xperia Hybryd rom or ICS official Sony touch screen works ...
So I think that the touch screen works only with the official kernel!
Here's how I do:
1 - flash with fastboot kernel
2-cwm go to recovery and wipe data / factory reset, and Dalvik cache partition
3-zip file with the flash custom roms
4-reboot
But with CM9, CM7, Miui and their kernels touch screen does not respond
Please Help!
Try to use KA1x kernel with miui/CM roms; Maybe it works.
Could you give me the link of this kernel?
I have used PwnKernel 1.6 with miui and SETweaked android 2.3.x and PwnKernel ICS for KA15 and it worked very well.
PwnKernel 1.6: click
PwnKernel ICS(no bluetooth): click
Inside the zips you will find the boot.img(kernel) and Pwnkernel-modules. For wifi and bluetooth(BT only for pwnk 1.6) you have to install them under recovery after flashing the kernel.
If they don't work, take a look here; it's a list with kernels and roms for neo.
http://forum.xda-developers.com/showthread.php?t=1316394
I have used 1.6 Pwnkernel with CM7.1 but the touch screen does not work the same!
In my opinion the problem is another, looks like this user has solved the same problem but with a ZTE phone: http://www.youtube.com/watch?v=jKO9flwApD0. I tried doing the same thing but my Neo does not work without batteries, then the user updating the video wrote that he found a better way to solve with a fixed kernel. I also tried the kernel FXP but the problem returns! is very strange but I can not find solutions!
maybe it's depends on hardware, maybe your phone has other touchscreen (like there was with SE X8)
Trust me the stock Rom is much faster than many others. I've give up on trying any android 2.x based roms and the ICS ones are, at least for now, laggy and/or buggy. Don't feel bad if you can't solve this problem
Use the fxp kernel provided in the rom and download the latest cm7.2
Pwn kernel will give problems for cm7 and miui.
And since miui is based on cm7 and cm9 ...they share the same bugs...if you are facing dead portion of screen at the bottom in landscape mode...then only latest fxp kernel can help.
And if the whole screen is non functional ...then there is something wrong with your flashing...and it is obviously kernel related.
Sent from my MT11i using XDA
U should 1st flash the .64 baseband coz cm7/9 n miui need .64 baseband to work properly
Sent from my MT11i using XDA
I have flashed .64 firmware official, then i have flashed kernel included in the zip file of CM7.1.0.1, then i have format and wipe everything and flashed rom, but Touch doesn't work!!
Same thing with CM9!
I do not know what to invent to make it work!
I have flashed the official SE beta Ics kernel and everything works! means that the flash is correct. Right?