Hey i got a Big a** problem here i tried to go back on fk 18.1 (wiped dalvik and battery stats) and i flashed it but then it loads but right before the bootanimation the screen remains black but the phone ends loading fully i mean when you unlock the phone it vibrates right well it does vibrate so it tells me that the phone is working but the black screen doesn't go away
after seeing this i wiped and flashed MIKOS 6.6 2.3.4 ROM and i didn't flash franco's kernel and then it worked perfectly so then i flashed the kernel again (FK 18.1) AND AGAIN THE BLACK SCREEN BEFORE BOOTANIMATION! so cant use the phone :/ why the hell is this happening?!!! Help me
Which kernel are you using, I believe CFS is for Gingerbread only and BFS is for froyo, or it might be the other way around, I ended up running through the same problem, I just wiped everything, ie...dalvik,cache ( you get the picture) and reflashed the kernel, I used v18 cfs ( I believe) but make sure you do a backup, I had alot of problems using Clockworkmod's recovery so I switched back to AmonRA and Ive had no problems, Ive read that it's not recommended to use Rom Manager so just do the search for flashable custom recovery
Jrhodes85 said:
Which kernel are you using, I believe CFS is for Gingerbread only and BFS is for froyo, or it might be the other way around, I ended up running through the same problem, I just wiped everything, ie...dalvik,cache ( you get the picture) and reflashed the kernel, I used v18 cfs ( I believe) but make sure you do a backup, I had alot of problems using Clockworkmod's recovery so I switched back to AmonRA and Ive had no problems, Ive read that it's not recommended to use Rom Manager so just do the search for flashable custom recovery
Click to expand...
Click to collapse
oh i remember i did a nand back up and BFS is for gingerbread CFS froyo but feedbacks claim that cfs is better as i said i was using Franco's kernel v1 Gingerbread last updated and i tried to go back to 18.1 which doesn't have the black screen bug problem anyways thanks for replying bud, i'll restore the nand backup!
What you want to do?
If you are using Mik 6.5.5 you have to stick with FK 18.1. There is no such issue. if you are using Mik 6.6 test release then use FK Gingerbread kernel. There is no such bug. You can not flash Fk 18.1 on Mik 6.6. You will find same problem.
franco's rom doesn't support ipv6??? is it?
williamcharles said:
franco's rom doesn't support ipv6??? is it?
Click to expand...
Click to collapse
There is no useful support for IPv6 in Android.
fernando1sg said:
oh i remember i did a nand back up and BFS is for gingerbread CFS froyo but feedbacks claim that cfs is better as i said i was using Franco's kernel v1 Gingerbread last updated and i tried to go back to 18.1 which doesn't have the black screen bug problem anyways thanks for replying bud, i'll restore the nand backup!
Click to expand...
Click to collapse
6.5.5 is based on kernel 2.6.32. mik's 6.6 is based on 2.6.35. fk 18.1 is based on 2.6.32!! 6.6 ROM cannot support a kernel then gingerbread..i.e., 2.6.35!!!
shashi_hv said:
6.5.5 is based on kernel 2.6.32. mik's 6.6 is based on 2.6.35. fk 18.1 is based on 2.6.32!! 6.6 ROM cannot support a kernel then gingerbread..i.e., 2.6.35!!!
Click to expand...
Click to collapse
alright thanks for replying
Fraco kernel GB causes problem with my P500...
I tested with rom CM7 miks, and now with rom void #forever
After to flash franco kernel, USB doesnt work.
Related
I flashed andy's gb rom rc1 and was happy with the rom, only thing I missed was overclocking...so I flashed mik's v1.1 kernel.
Will this harm the phone in any way? Pls tell me, else I'll reflash the rom...
Instead is the kernel .zip available? so I wont have to reflash the rom. I am aware tht andy will be releasing a modified kernel soon with miks oc features.
But in the meanwhile I dont want my phone to have any adverse effects.
Thanks
guru_urug said:
I flashed andy's gb rom rc1 and was happy with the rom, only thing I missed was overclocking...so I flashed mik's v1.1 kernel.
Will this harm the phone in any way? Pls tell me, else I'll reflash the rom...
Instead is the kernel .zip available? so I wont have to reflash the rom. I am aware tht andy will be releasing a modified kernel soon with miks oc features.
But in the meanwhile I dont want my phone to have any adverse effects.
Thanks
Click to expand...
Click to collapse
You should notice a lot of bugs now that yo uflashed mik_os 1.1 ancient kernel . Like black screen bug , reduced performance , probabily no 3d/2d , freezes ....
Thanks @zerobarat1 for the quick reply..
Actually the performance isnt much diff, running it at 729 makes it faster actually. But yes the black screen is bugging
So,
How do I go back to original kernel without reflashing the rom....I hadnt created a nandroid Is there a zip? I read the whole gb thread and have been following them for a while...afaik I couldnt find such a zip
Anyway Im waiting to see if andy releases his updated oc kernel today, it will save me the trouble of reflashing whole rom as opposed to just flashing new kernel over current one
Reflash the ROM without wiping.
Hello all,
Today I've flashed a custom ROM for the first time on my P500. Everything was smooth and my phone is now running #Devoid Froyo Final. I've gotta say that I bought this phone already modded with Light 2.2.2 running, but I wanted to learn the process and test other ROMs myself (also I was not happy with Light 2.2.2 battery consumption).
I'm using CWM as my custom recovery (installed via ROM Manager).
Now I want to go ahead and upgrade the Kernel to the latest Franco's build, but I just want to make sure that I have the process right (better safe than sorry). According to Franco's Kernel post the instructions are as follows:
1. Reboot intro recovery
2. Flash the latest kernel version from this topic
3. Reboot
4. Flash the ZRAM module
5. Enjoy
Still I need some clarifications with some of those steps:
1.- Franco's Kernel has two versions on the post: "V.17 and V.17 BFS"... it says that BFS is the one for Noeijns ROMs, so I want to confirm that for #Devoid Froyo Final I need the "V.17 BFS" version
2.- Since the instructions says that I should flash the kernel and then reboot and then flash the ZRAM module, should I use the "Reboot Recovery" option on ClockWorkMod to reboot directly into recovery to flash the ZRAM, or should I boot normally into the Phone OS and then reboot into recovery??
3.- Should I run any of the Wipes before or after flashing the new Kernel? (Data, Cache, Dalnik or Battery Stats). On the gazillion posts I've read I seem to recall that for Kernel installs the Battery Stats should be wiped, but I might be confused (I have posts overload LOL)
4.- Are there any other considerations that I should take before/after flashing the new Kernel?
Thanks in advance.
In general flashing kernels there is no need to wipe, but just be sure do a backup.
Feeshie said:
In general flashing kernels there is no need to wipe, but just be sure do a backup.
Click to expand...
Click to collapse
Ok.. what about the version of the Franco Kernel that I should flash (CFS or BFS) for "Devoid Froyo Final" ??
ElGeorge said:
Ok.. what about the version of the Franco Kernel that I should flash (CFS or BFS) for "Devoid Froyo Final" ??
Click to expand...
Click to collapse
CFS. BFS is for 2.3.
Sent from my LG-P500 using XDA Premium App
franciscofranco said:
CFS. BFS is for 2.3.
Click to expand...
Click to collapse
Thanks Master!!!!
May I suggest adding a couple of lines to your Kernel's post mentioning that fact??. It would help n00bs like me and avoid having this question re-posted.
Something like:
CFS for: 2.1, 2.2, 2.2.1 and 2.2.2 based ROMs
BFS for: 2.3.X based ROMs
Thanks for all the great work!!!
I read in one of the posts that we don't need to flash the zram initialization zip as its on by default. I have devoid too, but haven't flashed that zip. Should I or should I not?
Sent from my LG-P500 using XDA App
rforums said:
I read in one of the posts that we don't need to flash the zram initialization zip as its on by default. I have devoid too, but haven't flashed that zip. Should I or should I not?
Sent from my LG-P500 using XDA App
Click to expand...
Click to collapse
Some roms include the zram module (e.g. Devoid froyo final) while others don't. Read whether it's included on the roms page.
Sent from my LG-P500 using XDA App
I was using CM7 and I switched faux123's 1.3ghz kernel to the enhanced 1.0ghz one with ease.
When I tried switching kernels while running Aura, it wouldn't boot up. Had to reflash Aura to get it working again. (back to the
Wondering if anyone can give me the proper procedure for flashing a new kernel using CWM for Aura.
Would I use Gingerbread kernel or CyanogenMod7 kernel from this link: http://forum.xda-developers.com/showthread.php?t=1156040
I'd try it but don't want to risk having to reflash Aura and wasting time to set up everything.
Thanks!
sirdizzle415 said:
I was using CM7 and I switched faux123's 1.3ghz kernel to the enhanced 1.0ghz one with ease.
When I tried switching kernels while running Aura, it wouldn't boot up. Had to reflash Aura to get it working again. (back to the
Wondering if anyone can give me the proper procedure for flashing a new kernel using CWM for Aura.
Would I use Gingerbread kernel or CyanogenMod7 kernel from this link: http://forum.xda-developers.com/showthread.php?t=1156040
I'd try it but don't want to risk having to reflash Aura and wasting time to set up everything.
Thanks!
Click to expand...
Click to collapse
Use the GB one since that's what Aura is based on. Wipe cache, dalvik, flash kernel, reboot.
Ok, i need some help out here.
I flashed francos .35 kernel along with andy's ROM on my friends phone..and the following don't seem to work-
Bluetooth
Accelerometer
Wifi
Tethering
Before u ask any questions..Lemme tell you what i did-
Recovery
Complete wipe (system,data,factory reset,cache,dalvik)
Installed andy's rom
reboot
back to recovery
Wiped cache partition+dalvik cache
flashed kernel 2.6.35.14
reboot
Baam !.. and nothing works.
I kindly ask for possible solutions and screwups on my behalf.
Thank you.
Rutuj said:
Ok, i need some help out here.
I flashed francos .35 kernel along with andy's ROM on my friends phone..and the following don't seem to work-
Bluetooth
Accelerometer
Wifi
Tethering
Before u ask any questions..Lemme tell you what i did-
Recovery
Complete wipe (system,data,factory reset,cache,dalvik)
Installed andy's rom
reboot
back to recovery
flashed kernel 2.6.35.14
reboot
Baam !.. and nothing works.
I kindly ask for possible solutions and screwups on my behalf.
Thank you.
Click to expand...
Click to collapse
Ammmm I think....wipe dalvik before flashing krnel?
Did that too..
Typo
Rutuj said:
Did that too..
Typo
Click to expand...
Click to collapse
why dont you try a .32 and see if it has same effects?
or give a try to goldleaf's kernel
well yes!
.32 works but i wanted .35
Tried flashing .35, 3 times but to no effect.
Even goldeneaf has the same problems.
.32 kernels are more stable. That's why most ROMs still use .32.
why would you flash franco's kernel, since andy said that kernel is already installed in his rom? Just reflash the rom and all should work, franco didn't add any modifications since 02.10... And don't flash a .32 kernel on a .35 rom, that will just mess up your phone.
cr157y said:
why would you flash franco's kernel, since andy said that kernel is already installed in his rom? Just reflash the rom and all should work, franco didn't add any modifications since 02.10... And don't flash a .32 kernel on a .35 rom, that will just mess up your phone.
Click to expand...
Click to collapse
Well, the .35 works on everyone else's ROM.
And the default kernel is .32, however im not that satisfied with its performance so I wanted a switch
@Moderator
Please close/delete this thread, the problem has been solved.
Thanks.
Rutuj said:
@Moderator
Please close/delete this thread, the problem has been solved.
Thanks.
Click to expand...
Click to collapse
Send him a pm.
Sent from my LG-P500 using xda premium
Flashed 1. 3 faux kernel but I want to go back to stock kernel for cm7 do i have to restore or do i flash the stock GB kernel from att? I don't know wat under bolting really does that's why I'm going back. I'm just don't know which faux kernel to flash from that thread thanks
Sent from the phone I have sex with
twayneo said:
Flashed 1. 3 faux kernel but I want to go back to stock kernel for cm7 do i have to restore or do i flash the stock GB kernel from att? I don't know wat under bolting really does that's why I'm going back. I'm just don't know which faux kernel to flash from that thread thanks
Sent from the phone I have sex with
Click to expand...
Click to collapse
If you want the stock CM7 kernel then just reflash the Ba2tF zip. I'm sure there's a way to extract it, but if you're not sure about undervolting I doubt that's something you want to try.
Faux used to have a 'stock' CM7 kernel for download, but I'm assuming with 3 different betas (and nightlies and weeklies) he removed the link to avoid people downloading something that wouldn't match the CM7 beta version they were on.