baseband? how to update? - Fascinate Q&A, Help & Troubleshooting

I upgraded to super clean 2.9.2, but baseband shows up as DI01. is that normal, or did mine not update?

Only Odin/Heimdall will work. We don't know where the modem.bin goes, so we can't use redbend_ua or any other recovery-based method.

Modem(baseband) is not included in super clean. You need to update via odin pda button. DL09 and EB01 modems work well with the latest superclean.
Sent from my SCH-I500 using Tapatalk

oh...so do I just simply flash it through odin as pda? any prerequisites?

Here is a link to the EB01 Modem.
http://www.mediafire.com/?1r7uk6gf8d6s76z
You will need to use ODIN to install this.
Use the PDA button ONLY, navigate to the location of the modem file, click it, then run odin. Your phone will reboot and verify that you have the correct baseband.
If you do not know how to use odin I highly recommend reading this link
http://forum.xda-developers.com/showthread.php?t=948722
...thoroughly before starting with odin.
Good luck!
note* the link to the guide also contains information about flashing the EB01 modem and the same link I have published here!

minho422 said:
oh...so do I just simply flash it through odin as pda? any prerequisites?
Click to expand...
Click to collapse
As long as you use the PDA button and have used odin before you should be fine. Its very straight forward. Just D/L the modem from my link and your good to go!

after I flashed through odin, there seems to be a problem with the battery...?
charge level was 51% before I flashed, but after it showed up as 100% instantly. what's going on?

I don't know the actual cause, but I would assume it has something to do with the battery stats more or less.
You might try turning the phone off and leave it charge over night and in the morning wipe the battery stats (search for this there are plenty of threads! ). Then drain it before charging next time. You should see the battery return to normal.
I wouldn't be to worried about it as I have flashed my phone(stupidly I will admit) at any number of different percentages and I still am getting great battery life.

sneakysolidbake said:
Modem(baseband) is not included in super clean. You need to update via odin pda button. DL09 and EB01 modems work well with the latest superclean.
Sent from my SCH-I500 using Tapatalk
Click to expand...
Click to collapse
Since I jumped into the xda forums after eb01 had come out, I've been trying to find a DL09 modem to use with Odin. Seems like most people are going crazy for thew newer basebands, but I've heard that DL09 works great with both GPS and battery life.
That said, you don't happen to have a working DL09 download link that you could toss on here do you?

lane32x said:
Since I jumped into the xda forums after eb01 had come out, I've been trying to find a DL09 modem to use with Odin
Click to expand...
Click to collapse
original DL09 thread still seems to work

s44 said:
original DL09 thread still seems to work
Click to expand...
Click to collapse
Thanks dude. btw, the only time i've flashed the modem before was when I first made the jump to eb01 a month and a half ago. Is it ok to just ODIN the modem, or do I have to re-flash a rom after I flash the modem?
*edit* well, I went ahead and odin'd the modem over top of all the stuff I've already got on there. <fingers crossed> Seems to work so far.

Just modem is fine. Remember to use PDA...
Swyped from my Voodoo-powered Fascinate via XDA

s44 said:
Just modem is fine. Remember to use PDA...
Swyped from my Voodoo-powered Fascinate via XDA
Click to expand...
Click to collapse
Oh yes. I *have* used ODIN several other times, especially for recovering from some sort of boot loop and a few other issues, so I'm very familiar with the PDA button by now. But probably good to have that warning there in case anybody else reads this for help later on.

Related

Flash Modem

Could someone send me in the right direction or just tell me do I use PDA or Phone to flash the KA6 modem.bin. I know using PDA is for the Rom.
I'm running KA5 right now and would like to test out the KA6 Modem. Should I just flash the whole KA6 rom since its newer and from reading seems more stable and faster?
Put ka6 modem in pda.
Sent from my SGH-T959 using XDA App
ok do you have the odin flash modem or the cw flash one.
Ok I have done that, Odin says File analysis, Get pit for mapping, Firmware update start, Modem.bin
It just sits there...
It shouldn't take long to flash a modem.bin
dligon said:
ok do you have the odin flash modem or the cw flash one.
Click to expand...
Click to collapse
I have ODIN. Trying to flash KA6 modem.
Do you have a froyo rom already installed?
Sent from my SGH-T959 using XDA App
This should be in the Q&A section probably.
According to the superb Vibrant Modem reference page:
Just extract and load into phone section and Flash
Find the modem that uses clock work recovery, put in internal memory, reboot into recovery and flash "zip from sd" and locate your file...
Make sure battery is not low...have fun....
hitman818 said:
Do you have a froyo rom already installed?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Yeah I'm running KA5 right now and wanted to add the KA6 Modem.
I have the KA6 Rom sitting here. I might just load the whole rom if the Modem flash go threw.
Shinwrx said:
Yeah I'm running KA5 right now and wanted to add the KA6 Modem.
I have the KA6 Rom sitting here. I might just load the whole rom if the Modem flash go threw.
Click to expand...
Click to collapse
Don't you have clock work recovery? I find it easier with it...
azzzz said:
Don't you have clock work recovery? I find it easier with it...
Click to expand...
Click to collapse
No I don't have clock work. I've Just tryed flashing the KA6 rom and I'm getting the same issue as with the modem. Its just hanging here and not doing anything. If I unplug my phone and try booting it. I get a phone to computer icon on the screen.
I never use odin so not much help...good luck tho...
Now the KA6 rom is going threw.. WTF I have never had a problem flashing before especially with a modem.bin..
you can dl a program called 7zip. you can delete the modem bin in the rom you wanna flash and then replace it with the one you do and it zips it back up and you can flash it that way.
FYI modems are flashed through Phone section in odin....
no pit....
and to the other people.
if his phone froze during odin, he's most likely not going to be able to get into Recovery mode.
so
USE ODIN and put modem.bin in the phone section and flash.

Please help me send my phone in

My vibrant recently stopped charging. I've tried different chargers and batteries and it won't charge. Soblong story short I'm sending it in but I'm running bionix 1.2.1 and pretty much everything isn't stock, literally everything. So there is 5% battery left so should I factory reset or try to flash a stock rom within 3 minutes? If so which rom. Please and thankyou guys
Pop in someone else's battery and ODIN JFD and then JI6. Read Vibrant bible for instructions.
Sent from my SGH-T959 using XDA App
nick1217 said:
My vibrant recently stopped charging. I've tried different chargers and batteries and it won't charge. Soblong story short I'm sending it in but I'm running bionix 1.2.1 and pretty much everything isn't stock, literally everything. So there is 5% battery left so should I factory reset or try to flash a stock rom within 3 minutes? If so which rom. Please and thankyou guys
Click to expand...
Click to collapse
Soft brick it.
I can't soft brick it. I talked to them and they now the issue is not being able to charge and I can't use a friends battery because none of mine have a sgs variant
Whats wrong with ODIN'ing back to stock? Oh, and nice avatar pic
A factory wipe will reset Bionix-V back to the initial state and will not turn everything back to stock. And 5% battery life is too risky imho. You really need to find someone who has a Vibrant, swap out batteries and flash the stock firmwares. JFD is the original firmware that had been shipped with the earlier releases of Vibrants. JI6 is an OTA update to JFD, and later versions of Vibrants have been shipped with this firmware. You can't flash JI6 alone, you need to ODIN JFD with 512 PIT file with repartition option checked. Then ODIN flash JI6 without PIT file with repartition option unchecked, of course. This will make your phone completely stock.
I'm sending in my Vibrant as soon as T-Mo ships me a replacement this week. The search hardware touch-sensitive button failed to light up, and T-Mo would replace it. I have JI6 firmware and am patiently waiting for the replacement phone to arrive.
nick1217 said:
My vibrant recently stopped charging. I've tried different chargers and batteries and it won't charge. Soblong story short I'm sending it in but I'm running bionix 1.2.1 and pretty much everything isn't stock, literally everything. So there is 5% battery left so should I factory reset or try to flash a stock rom within 3 minutes? If so which rom. Please and thankyou guys
Click to expand...
Click to collapse
If it was me I would just flash a stock rom. When who ever the phone gets sent to gets it... they will check the port then pry wipe and thats that.
I'm going to guess the port just does not work? Otherwise they would not need to worry about the battery level because the phone would take the power straight from the cord connected to the computer. Meaning no odin.
serban954 said:
Whats wrong with ODIN'ing back to stock? Oh, and nice avatar pic
Click to expand...
Click to collapse
jaetm83 said:
Pop in someone else's battery and ODIN JFD and then JI6. Read Vibrant bible for instructions.
Click to expand...
Click to collapse
Ooh, I never thought about the fact that the micro USB port might have been fried after all. But if it was me, I would still try ODIN'ing anyway to see if it works even risking a potential brick. And as far as I can tell from flashing tens of times, the phone doesn't seem to charge the battery while flashing.
Not the actually USB port on my phone is fried. So Odin-ing won't work at all. Is there a stock ji6 Ota rom? If so I will just borrow a battery and flash that....
i would just say "f it" and send it in the way it is....you can't connect to the phone via odin cause the usb port is bad, hence you can't charge....
serban954 said:
Whats wrong with ODIN'ing back to stock? Oh, and nice avatar pic
Click to expand...
Click to collapse
Thanks bro
idtheftvictim said:
i would just say "f it" and send it in the way it is....you can't connect to the phone via odin cause the usb port is bad, hence you can't charge....
Click to expand...
Click to collapse
About to do that lol but if I borrow someones battery is there a stock ji6 ota rom I can flash?
here is a link that was in the "bible for the JI6 official. no root" rom...
can't post the link.....too much of a "noob" but check out the "bible" in the dev forum, there is a link for 2.1 eclair roms in the OP....should take you to the JI6 .rar
Can I flash from 2.2 to 2.1? Haven't been on eclair in ages, and yes I know to disable voodoo before the flash
you wouldn't be flashing just that rom....you would need to "odin" your phone back to stock using that rar and a .pit file, the 512 .pit file....you need to check out the bible to get info on odin, and how to do it....you can't simply "flash" from 2.2 to 2.1 because kernels are different....someone correct me if i am wrong...
idtheftvictim said:
you wouldn't be flashing just that rom....you would need to "odin" your phone back to stock using that rar and a .pit file, the 512 .pit file....you need to check out the bible to get info on odin, and how to do it....you can't simply "flash" from 2.2 to 2.1 because kernels are different....someone correct me if i am wrong...
Click to expand...
Click to collapse
Yea but his USB port in the phone is fried. He can't connect to computer.
Sent from my SGH-T959 using XDA App
Why not flash stock 2.2? i know there is a rom for it floating around some where, otherwise just flash a stock ka6 rom and use a stock kernel, and do a internal sd wipe
shreddintyres said:
Why not flash stock 2.2? i know there is a rom for it floating around some where, otherwise just flash a stock ka6 rom and use a stock kernel, and do a internal sd wipe
Click to expand...
Click to collapse
Thanks bro I'm gonna look for that rom. If u find it before me let me know. I'll update my post when I find it

[ODIN][CWM]ED01 Stock ROM/Kernel/Recovery

I put this together for the folks that don't care about the ED01 modem and just want the stock ROM. It could also be useful for people that got the OTA, but want to go back to stock after flashing a custom ROM. I updated via Adrynalyne's method (Odin DL09, update to EA28, then ED01) that he posted here.
There are two versions, one for Odin, the other for CWM. The Odin version is still rooted, but otherwise stock. It will flash the ROM, kernel, and recovery, as well as perform a factory reset. The CWM Zip version is not rooted, but you will want to wipe data after you flash it (perform a factory reset). Neither method will flash the modem as I have no way to dump that, so you will need to already have the ED01 modem if you want to be fully stock.
Odin Version
CWM Zip Version
I'm guessing this gives CWM3?
And which kernel?
tbeas said:
I'm guessing this gives CWM3?
And which kernel?
Click to expand...
Click to collapse
This is completely stock ED01 that has been rooted minus the modem. There is no CWM recovery, no custom kernel, it is all stock.
Ah ok. Do I flash this or the modem first?
Thanks.
flashing this will also remove and CWM you have installed.
Is this rooted with the new su package? Thanks
This is great work! I want the ED01 modem for this though, that prob wont be happening anytime soon though im guessing right?
tbeas said:
Ah ok. Do I flash this or the modem first?
Thanks.
Click to expand...
Click to collapse
This doesn't include a modem, so you will be on the same baseband you were on beforehand. Until someone digs up a ED01 modem, you need to do the OTA to get the ED01 modem.
[email protected] said:
Is this rooted with the new su package? Thanks
Click to expand...
Click to collapse
Yes
bigjobber69 said:
This is great work! I want the ED01 modem for this though, that prob wont be happening anytime soon though im guessing right?
Click to expand...
Click to collapse
Yeah, until someone happens to find a full Odin package for ED01, or can somehow stumble upon just an ED01 modem, this will just be good for flashing the stock rooted ED01 system/kernel.
I thought the EC01 modem would work with this?
what do you guys mean by modem i came from a htc evo to the verizon network which is way better lol
tbeas said:
I thought the EC01 modem would work with this?
Click to expand...
Click to collapse
EC01 modem will work just fine for this.
Dirt_Mcgirt said:
what do you guys mean by modem i came from a htc evo to the verizon network which is way better lol
Click to expand...
Click to collapse
Modem and Radio r the same thing
Thanks for this. I have been flashing my phone every other week if not more since day 1 without any problems. Now that I want to sell it all of a sudden I'm stumped and can't get it back to working order before I ship it out. Hopefully this will solve my problems. Thanks again. Thunderbolt, here I come!
thanks for the ODIN! This will help greatly! Is it pretty much stock, or did you change a few things (DEBLOAT) and does it have the STAY AWAKE feature?
Modem = Baseband = Radio
Out of curiosity why would you flash this when you can get the version with the modem?
What's the advantage?
Thank you for your work.
Sent with my thumbs.
It would be useful if you did the OTA to get the modem, then installed a custom ROM and needed to go back to stock. Say your phone starts doing something odd, you can't take it in with a custom ROM on it, so you could use this to get back to stock faster than taking the DL09->EA28->ED01 route.
imnuts said:
It would be useful if you did the OTA to get the modem, then installed a custom ROM and needed to go back to stock. Say your phone starts doing something odd, you can't take it in with a custom ROM on it, so you could use this to get back to stock faster than taking the DL09->EA28->ED01 route.
Click to expand...
Click to collapse
Exactly, cause how odd would it be for a phone to have a ED01 modem and DL09 system =D lol
so has there been any noticeable differences between ec01 and ed01?
Thanks for this; I already did the long stroll to get the ED01 Radio, and this will save me tons of time if "something goes wrong" or for the next ROM change.
is it possible to use re-partition option with this rom? or atlas PIT file?

[ODIN]ED03 ROM/Kernel/Recovery

Much like I did for ED01, I created a new Odin for the OTA ED03 update. Once again, this doesn't include the modem, just the base system, kernel, and recovery. It will also perform a factory reset, and is currently Odin only, I'll create a CWM flashable package at some point as well. Enjoy. This should be fully stock unrooted as I was only temp-rooted when I created the image.
Download here
Benefits over ED01 as its 2 days newer than ED01 according to build date??
Sent from my SCH-I500 using XDA App
is it rooted? i figure its stock.
am i a noob? yes. but im addicted to flashing so im about to do it!!!
ED03????? WTF over?!?!?!?!
Bubbadogg14 said:
Benefits over ED01 as its 2 days newer than ED01 according to build date??
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
See the ED03 thread in General
touchthecaleb said:
is it rooted? i figure its stock.
Click to expand...
Click to collapse
It is fully stock and should be unrooted as well.
Hashes
Could you provide file hashes? I've had corrupted download with very small errors which was not detected until I use odin.
beray5 said:
Could you provide file hashes? I've had corrupted download with very small errors which was not detected until I use odin.
Click to expand...
Click to collapse
Umm, if it fails verification in Odin, it doesn't flash. How is allowing Odin to check it harder than checking it manually that you wouldn't just allow Odin to work as it is designed to do?
ok I flashed it! I don't know what's different but it's working perfectly.
Im using the latest otb kernel the latest cwm (in purple) and the ec01 radio.
I even rooted it and uninstalled all the annoying aps. Think I'm going to use this rom for now. Thanks imnuts!!!!
Edit: it just feels good to be "up-to-date" lol
Edit: LOL! such small changes.... Pointless but fun.
imnuts said:
Umm, if it fails verification in Odin, it doesn't flash. How is allowing Odin to check it harder than checking it manually that you wouldn't just allow Odin to work as it is designed to do?
Click to expand...
Click to collapse
I'm very often in places with no connection of any kind whatsoever, its also when I'm between time waiting and had the time for things like odin.
If the file is corrupted, then I would have to abort and wait for the next unknown available free time period to repeat all over again.
I don't see any files on the forums to attain the ED03 modem
Odin has a built in MD5, and created the file to support it. If you don't have a connection or time to flash via Odin, how is having the checksum going to help you? No connection and the checksum is bad, you can't download the file again. No time for Odin, and you probably don't have time to generate and verify a checksum because in the time that it'd take you to verify it, you'd be part way through flashing in Odin.
AuroEdge said:
I don't see any files on the forums to attain the ED03 modem
Click to expand...
Click to collapse
That's because there isn't a file available.
If you want the radio, you'll need to Odin back to DL09 or DI01 and go through the OTA process
imnuts said:
Odin has a built in MD5, and created the file to support it. If you don't have a connection or time to flash via Odin, how is having the checksum going to help you? No connection and the checksum is bad, you can't download the file again. No time for Odin, and you probably don't have time to generate and verify a checksum because in the time that it'd take you to verify it, you'd be part way through flashing in Odin.
Click to expand...
Click to collapse
I'll just make do with my own limitations.
Thanks.
Os anyone working on a debinged / debloated version of this?
Sent from my SCH-I500 using Tapatalk
MANY many thanks, imnuts! This will come in VERY handy in the future!
heya mate
first up thanks awesome pice of work indeed.
second , I AM A NEWBIE on myvzn fsc that i am using in INDIA i guess only DL09 seems to working well as all other builds apart from DL09 and EB01 seem to stuck on language selection after first boot.
]can you please tell me what do i have to actually do to install it ( your odin package )
i mean my details are :
Firmare
2.1-update1
baseband version
S:i500.04V.DL09
Kernal version
2,6.29
Build number
SCH-I500.DL09
the handset aint rooted ( as there is no CWM or superuser thingy ion here there is a vooodoo folder in the sdcard though - i am a noob LOL pl bear with me )
please help me man , i am sorta fed up now flashing cstuff 10 times a day since last 4 days
regards
lord dredd said:
heya mate
first up thanks awesome pice of work indeed.
second , I AM A NEWBIE on myvzn fsc that i am using in INDIA i guess only DL09 seems to working well as all other builds apart from DL09 and EB01 seem to stuck on language selection after first boot.
]can you please tell me what do i have to actually do to install it ( your odin package )
i mean my details are :
Firmare
2.1-update1
baseband version
S:i500.04V.DL09
Kernal version
2,6.29
Build number
SCH-I500.DL09
the handset aint rooted ( as there is no CWM or superuser thingy ion here there is a vooodoo folder in the sdcard though - i am a noob LOL pl bear with me )
please help me man , i am sorta fed up now flashing cstuff 10 times a day since last 4 days
regards
Click to expand...
Click to collapse
You should use this -> http://forum.xda-developers.com/showthread.php?t=1044474
Since there will not be any data wipe in that procedure as you already are on DL09 you should be able to update to ED01 without being stuck at the language menu.
Are there actually any benefits
to the ED03 update as opposed to ED01?
beray5 said:
You should use this -> http://forum.xda-developers.com/showthread.php?t=1044474
Since there will not be any data wipe in that procedure as you already are on DL09 you should be able to update to ED01 without being stuck at the language menu.
Click to expand...
Click to collapse
well i did that as well
still i get stuck at language selection window ,
just donno what to do.
seems like apart from dl09 and eb01 no other ROM works
pntballer505 said:
Are there actually any benefits
to the ED03 update as opposed to ED01?
Click to expand...
Click to collapse
benefits: very little if any
negatives? there are no mods/roms/themes available and probably wont be

Help quick please!!!!!!

Hey all , im running evil fascination 3.6 and am trading phones with another person and wanna go back to full stock ed01 im guessing ...what is the easiest way to do so with odin ????...I DLed THE ED01 TAR AND NEED TO KNOW WHAT TO DO NEXT
Search for the ODIN sticky.
Use the Pda button.
http://forum.xda-developers.com/showthread.php?t=1026746
Odin DI01 and OTA the rest would probably be your best bet
strauss0829 said:
Hey all , im running evil fascination 3.6 and am trading phones with another person and wanna go back to full stock ed01 im guessing ...what is the easiest way to do so with odin ????...I DLed THE ED01 TAR AND NEED TO KNOW WHAT TO DO NEXT
Click to expand...
Click to collapse
What ED01 tar file did you download and where did you find it? I was not aware there was an ED01 tar file that would give you full ROM, kernel, and modem. Best bet would be to ODIN back to DL09 and OTA from there.
i got the ed01 tar from the forums landshark
strauss0829 said:
i got the ed01 tar from the forums landshark
Click to expand...
Click to collapse
Which thread? Because I scanned the threads looking for any mention of an ED01 tar in the thread titles and couldn't see any.
Ooops, my bad. I had forgotten about imnuts' thread with the stock ROM and kernel. Is that the one you downloaded? As long as you are reading ED01 under baseband in menu=>settings=>about phone, you can flash that ED01 file in ODIN and you will be good to go. If you have ED03 under baseband, you may need to ODIN back to DL09 in which case you will end up at ED04.
EDIT - and I just read more of imnuts' OP. The ODIN file is rooted, the zip file is not rooted. If the person with whom you are trading is expecting a completely stock phone, you will have to go with the zip file.
yea but where do i put the tar file
if i wanna OTA all the way where do i put DL09 file in ODIN
strauss0829 said:
if i wanna OTA all the way where do i put DL09 file in ODIN
Click to expand...
Click to collapse
in the PDA section. If you are running a voodoo kernel, make sure you go into CWM first and disable lag fix before you flash back to a stock, nonvoodoo kernel.
ok i disabled but if i go back to DL09 what about the modem and **** or is that all in the DL09 all in one package
strauss0829 said:
ok i disabled but if i go back to DL09 what about the modem and **** or is that all in the DL09 all in one package
Click to expand...
Click to collapse
DL09 ODIN file contains ROM, kernel, and modem. Then you will OTA up to current stock ROM and kernel, and current modem.
If you haven't already started flashing the DL09 file, make sure you are using this one, it is the Verizon one:
http://adrynalyne.us/files/stuff/CI500_VZW_DL09_ECLAIR.tar.md5
and how do i do it to put it in DL mode
strauss0829 said:
and how do i do it to put it in DL mode
Click to expand...
Click to collapse
power down phone, pull battery, open ODIN on computer, plug USB cable into usb port on computer (preferably in the back by the motherboard), plug phone into usb while holding volume down button. Yellow triangle will appear on phone, far left small rectangle in ODIN will turn yellow, click PDA button, find DL09 tar file, double click on it, hit start button on ODIN. When done, pull usb cord, put battery back in, power up. Skip through setup, go menu=>settings=>about phone=>system update=>check now, OTA's will pop up.
do i unclick auto reboot and reset time ?????
strauss0829 said:
do i unclick auto reboot and reset time ?????
Click to expand...
Click to collapse
Don't have to worry about those if you follow my instructions and unplug the usb cord from the phone before you reinsert the battery.
worked im on ed04 now thank you
strauss0829 said:
worked im on ed04 now thank you
Click to expand...
Click to collapse
Welcome. What are you trading for?
wait a minute.
did you say ED04?
Sent from my SCH-I500 using XDA Premium App
kpark67 said:
wait a minute.
did you say ED04?
Sent from my SCH-I500 using XDA Premium App
Click to expand...
Click to collapse
Yep. Software upgrade from verizon being pushed OTA to nonrooted phones today.
http://forum.xda-developers.com/showthread.php?t=1116356

Categories

Resources