I have a X10a on AT&T network. I used the 2.6 flash tool made by Androxyde and Bin4ry to flash the Rogers 2.1.1.A.0.6 yesterday march 26.2011. Everything seems to be working good so far....My question is when i plug the phone in to the wall charger it will say "no sim card in phone" just above the unlock slider. anyone have any ideas why that is showing up now? The other thing that i have noticed is periodically 2 red "x" will appear in the status bar in place of the signal strength bars and in place of the 3g data symbol. oh and instead of showing the 3G on the status bar it has a "H" instead. Has anyone else seen this happen? thanks
Don't know if you should be using Rogers branded firmware on AT&T network. It probably has something to do with that. It's looking for a Rogers sim card. Try flashing generic instead.
The H is better than 3G. It's more like 3.5g. You know the new 4G network being advertised HSPA.
Ok thanks for the info. I was considering flashing the 2.1 Generic but wanted to get some advice since i am what you would call a noobie.lol I pretty much did a bunch of reading and "winged it" through the flash process praying i didn't destroy my phone.
Yes, use the x10a global generic. I don't know if the newest update is available yet, but in many people's opinion 2.1.A.0.435 is better for AT&T. The new 0.16 update baseband is causing battery drain and connection problems. With global generic you will most likely get the official 2.3.3 Gingerbread update Sony just promised in a few months first.
Edit: you seem to have it down, but there is a new version of flash tool 0.2.9 that has some new features. You can root, enable JIT, install xRecovery, and remove Sony bloatware that is slowing down your phone. That may sound Greek right now, but they are the next natural things you will want to do. Check your private messages for a detailed guide with links to the downloads. It may be of some help.
Once again JBM I really appreciate your guidance with this. I have been reading alot and think i'm going to go ahead and reflash with 2.1 global generic as you said. My Baseband version is 2.1.55 and Kernel is 2.6.29 Do these need to be flashed?
The one ftf file is all you need, 2.1.A.0.435. It will probably change your baseband to 0.54, which is the one you want for AT&T.
Really, don't over think this. This is the same firmware you would have gotten from SE if you bought your X10 from a non-AT&T store. Generic in Android terms is a good thing. It means no restrictions or extra bloatware from AT&T. No need to pay for navigation and stuff like that.
Let me know how it goes.
Again you were right my baseband changed to 2.1.54 and everything is working perfect. the red x that was appearing in the status bar in place of the H and the signal strength bars is not happening and the message "no sim card in phone" has not shown up either. I think i'm going to attempt to root and add Xrecovery do i can then speed things up with JIT. I have been on my Sony Vaio all day.
Rollhard said:
Again you were right my baseband changed to 2.1.54 and everything is working perfect. the red x that was appearing in the status bar in place of the H and the signal strength bars is not happening and the message "no sim card in phone" has not shown up either. I think i'm going to attempt to root and add Xrecovery do i can then speed things up with JIT. I have been on my Sony Vaio all day.
Click to expand...
Click to collapse
Great! To use the flash tool to root, optimise(JIT) and install xRecovery, you need to set up phone first. Hit menu button / Settings / Applications and check "unknown sources". Then hit the "development" tab below and check "usb debugging". Then just turn flash tool on, and plug your phone into usb cable while the phone is still on. Do NOT mount usb connected. Then go across the tabs on the flash tool in order from left to right, root, root permissions, optimise, xrecovery. Enjoy.
XRecovery not installed
agentJBM said:
Great! To use the flash tool to root, optimise(JIT) and install xRecovery, you need to set up phone first. Hit menu button / Settings / Applications and check "unknown sources". Then hit the "development" tab below and check "usb debugging". Then just turn flash tool on, and plug your phone into usb cable while the phone is still on. Do NOT mount usb connected. Then go across the tabs on the flash tool in order from left to right, root, root permissions, optimise, xrecovery. Enjoy.
Click to expand...
Click to collapse
JBM, I did exactly as you said going left to right on flash tool. i did root and root permissions then optimize, the phone did a automatic reboot after Optimize finished then I went on to XRecovery. Flashtool says that "Xrecovery successfully installed". Now on Superuser there is a app called "unkown" on the apps allow screen. I do not have the Xrecovery app anywhere on my X10 app list. So I don't know what isn't right on my X10 or in the flash tool program. So I tried again installing Xrecovery again but got the same massage on flash tool and unknown in superuser. I did not do the "clean" step or the APK Installer step. I don't know enough to mess with either of those. there wasn't any indication on the phone that JIT was working either. flash tool showed it as successful also. do you know what i should try. Thanks again
Rollhard said:
JBM, I did exactly as you said going left to right on flash tool. i did root and root permissions then optimize, the phone did a automatic reboot after Optimize finished then I went on to XRecovery. Flashtool says that "Xrecovery successfully installed". Now on Superuser there is a app called "unkown" on the apps allow screen. I do not have the Xrecovery app anywhere on my X10 app list. So I don't know what isn't right on my X10 or in the flash tool program. So I tried again installing Xrecovery again but got the same massage on flash tool and unknown in superuser. I did not do the "clean" step or the APK Installer step. I don't know enough to mess with either of those. there wasn't any indication on the phone that JIT was working either. flash tool showed it as successful also. do you know what i should try. Thanks again
Click to expand...
Click to collapse
Ok, xrecovery doesn't show up as an app. What you have to do to enter xRecovery is reboot your phone, and when Sony Ericsson in white letters comes up press the power button a few times or the back button a bunch of times, and the xRecovery menu will appear. It takes a bit of getting used to. If the SE circular logo appears you missed it, and you have to reboot again.
There is a new way I will help you install that allows you to enter xRecovery from the home screen using the app gscript, but you have to do it the reboot way at first.
JIT isn't something you can see either. Well scrolling the app tray should be faster and smoother than ever. Search market and install "Quadrant" and "Linpack". They will allow you to run benchmark tests. Without JIT you should get around 500 quadrant and 8 linpack. With JIT enabled you should get 800+ quadrant and 30+ linpack.
Also, to truly optimize and increase performance like you would not believe (i.e. improve your benchmark scores, battery life, available RAM, speed, responsiveness) and get rid of any lag you should uninstall any preinstalled apps you don't use. Use titanium backup from the market to uninstall system apps without needing flash tool. However, system apps cannot be restored like user apps. You have to reinstall them. Actually, check your private messages in a few minutes. I will send you the pro version of Titanium Backup. With the pro version you can "freeze" system apps, so you don't have to uninstall them if you would rather not. Also, if you freeze an app and your phone works fine you know that it is safe to uninstall.
There are some that you shouldn't remove, but here's a list of safe ones off the top of my head. Of course, if you use them keep them. There are also a few threads about this.
Timescape(all) and Face Recognition (highly recommend uninstalling these two. You won't believe the difference)
SE Backup and Restore (use Titanium Backup I am sending you)
Chinese and Korean keyboard
PC Companion
SE Sync
Play Now
Pilot
JBM I was able to enter Xrecovery with the back button. my wifi was dropping every few minutes so I cleared my Dalvik cache and that seems to have fixed it. everything is running perfect. I uninstalled acouple apps & the 2 keyboards and now my best Quadrant score is 819 up from 741 and Linpack is 34.556. I can tell now that it is running faster and more responsive.
Cool. I am incorporating a lot of what I am helping you with into an AT&T specific guide for everything you've already done, and a whole bunch more if you are up for it. I am doing it anyway, but I figure I will see how my guides work for you as I add them to the thread. There is some stuff on there already that I haven't shared with you yet, like Voice Search. Anyway, check it out, and your pm. I just sent you a couple links.
http://forum.xda-developers.com/showthread.php?t=1012380
Next thing to do is upgrade xRecovery to FreeXperiaRecovery, so you don't have to reboot to get into xrecovery. You can enter from home screen. Keep an eye out for it...
Related
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
please any help....!
Go to applications, clear cache and start again.
If that doesn't work, reflash gapps.
idiay198 said:
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
Click to expand...
Click to collapse
Are you using gingerbread or freex10?
im newbie about this stuff....Couple of question..
1) How Do I reflash gapps?...
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
idiay198 said:
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
Click to expand...
Click to collapse
Sorry but i just couldnt help it. XD
So much for the average Joe jumping over the Android version.
XD
Does your X10 switch off after it has crossed the 15% battery line?
idiay198 said:
Anyone knows why a Xperia10 mobile, turnos off when it tries to use google maps using the GPS?....After I activate the GPS and Try to go to maps, my Xperia10 turns off inmediatelly......
Someone Knows why it happens?
Regards
Click to expand...
Click to collapse
Are u using any application killer app? if so then plz check the auto killing list....
or repair with Sesus/reflash.....
idiay198 said:
im newbie about this stuff....Couple of question..
1) How Do I reflash gapps?...
2) If gingerbread or freex10 is a kind of application so then I do not have it. I have android system and all the user application I have is from android market...
Please help with question (1)
Click to expand...
Click to collapse
My dear friend,
You obviously have no clue about the whole system, until you get used to operating system, i would recommend that you dont start flashing just yet. let's get you up to date on the whole thing.
Android is an Operating System it helps your hardware interact with the software, Freex10 and gingerbread are like windows XP and windows 7, the latest version of android is 2.3.2 a.k.a Gingerbread, Freex10 is version 2.2.1.
Considering you dont know anything about flashing, i am assuming that you are using the stock OS supplied either 1.6 (Donut) or if you have updated the OS, 2.1 (Eclair). You can verify by going to settings-> About Phone -> Android Version.
Gapps refers to google apps like maps, voice dialer, google search, market etc.
For the time being what i want you to do is tell me which android version you are using and also how exactly this problem started.
Regards
E
Click on the thanks button if my post was of any use to you
No...it turns off when I open Maps o Wisepilot and try to get position using the GPS....few seconds after the app start running ,it switch off and switch on again...
I have android 2.1 updated.... I have an app named Juicedefender and MYLookOut...I delete memory booster app and Auto killer. The maps app star working rigth wit the GPS for a while but few minutes later the phone switch off again....
Try updating apps of it still does not work try flashing the phone by going to http://forum.xda-developers.com/showthread.php?t=920746 download the flasher and the firmware from http://www.mediafire.com/?sqv6274anzfzn2x
Extract the flasher zip file, open the program X10FlashTool.exe
If the firmware is of the extension .ftf
copy the firmware to the firmwares folder found in the flasher folder
if the firmware is not in the .ftf format
Advanced -> Bundle creation -> select the folder containg the firmware -> enter details required ( Device, Branding, version) -> select all the files present in the folder list (on the left side) and transfer to the firmware content -> click ok
-> click on flash -> select the firmware -> when asked connect the phone in flasher mode and you are good to go.
If you require busybox or root or xrecovery it will be found in the advanced menu.
Now update Maps and try again,
Regards
E
I was making some test and the problems happen also when I opne GPSTest app. Yesterday I used the SonyEricson Companion Software to repaire the phone (I think is like "reflash the phone"). After that I install superuser, busibox and I rooted my phone. Finally activate the GPS and try to test it using GPSTest app but it works fine for a couple of minutes and after that the phone turned off by itself.... Don´t u think the problem could be the GPS Hardaware instead of software?......By the way , It seems like the problems showed up after I updated my phone fromo android 1.6 to 2.1-updated....
the link you wrote for getting flash and firmware is for xperia X10i but my phone is X10a is there any problem with that? O I need to look for X10a?
idiay198 said:
I was making some test and the problems happen also when I opne GPSTest app. Yesterday I used the SonyEricson Companion Software to repaire the phone (I think is like "reflash the phone"). After that I install superuser, busibox and I rooted my phone. Finally activate the GPS and try to test it using GPSTest app but it works fine for a couple of minutes and after that the phone turned off by itself.... Don´t u think the problem could be the GPS Hardaware instead of software?......By the way , It seems like the problems showed up after I updated my phone fromo android 1.6 to 2.1-updated....
Click to expand...
Click to collapse
There is a possibility that it could be your hardware and since no other user is helping us out, i think its best you reflash using SEUS and DO NOT root the phone and go to a nearby service center and show it to them
Yea the firmware link i gave is for x10i, my bad i thought you had a x10i anyways it doesnt matter because i have heard of users who have installed x10i firmware on x10a anyways for the sake of safety of you mobile, in the flasher website, if you scroll down a bit you will find firmware for the x10a
Regards
E
Ok I reflash the way you told me...I selected the firmware for x10a ...everything was OK after I reflash the phone until I see that I do not have data conection anymore!!....I am in mexico and I was paying a data conection using EDge and 3G but after the reflash I can not havit both of them!!....now what_
Thank you so much...I fix the data conection problem...I need to restore my system settings backup. Now it seems to work properly incluiding the GPS....I am gonna test it the rest of the day to confirm is 100% ok....Thanks a lot
Always there to help a person in need bro. Take care and if everything is fine, i would recommed that you root the phone and try out all the features possible on the mobile, make it worth your money
Regards
E
idiay198 said:
Thank you so much...I fix the data conection problem...I need to restore my system settings backup. Now it seems to work properly incluiding the GPS....I am gonna test it the rest of the day to confirm is 100% ok....Thanks a lot
Click to expand...
Click to collapse
Did you go back to 1.6 or 2.1? Just in case that it is a hardware problem, i would suggest that you take the phone to your local dealer and ask for a replacement device.
Better act while you still have warranty.
I will do that....after I reflash the phone , the problem comes out again...Afer a couple of minutes I activate the GPS and opened the Maps, the phone crash, I mean it switch off...
Im gonna ask warranty....regards
mine use to do it but it stoped after the third time
My basic understanding is that the baseband is like the firmware that makes the radio in your phone work (calls, mobile internet, wifi etc) right? But that is where my knowledge ends.
Just recently the mobile internet on my streak stopped working. The indicator for mobile internet still shows in the notification bar but any attempts to reach a web site or other connection just times out and fails. Wifi still works perfectly. It's not an issue with the carrier as I have never had to set anything up it has just worked out of the box each time I have updated anything. In any case for info my network is 3uk.
Now I have dropped this phone a few times, admittedly this could be what has caused the damage. On the other hand something might have become corrupted.
So assuming something might have got corrupted I'm thinking it could be the baseband but as I don't know much about them I'm not sure.
I have used QDL tool many times and had various versions of streakdroid on my streak. I have just about mastered the recover/restore/install procedure however in my ignorance you might say I have not learned much about basebands. I always try to learn the things I need as I go along and till now have not had to worry.
Here's the dumb questions I need answers to:
Do basebands come with each build of android? I mean rom downloads either official or streakdroid. I got the impression they did but not sure. I normally use streakdroid since v1.5.1
If they don't come with the roms where can I download an up to date baseband to see if it will fix my problem?
So far I have used QDL tool using the guide on streakdroid. Following that I install streakmod then use that to install streakdroid 1.9.0
Should I try installing any other rom?
Any other suggestions or tips of how I could get my mobile internet working?
Thanks in advance for any help!!
Have you looked at your APN settings?
Select Settings>Wireless & Networks>Mobile networks>Access Point Names
(might not be the exact name of the menus) but i know its under Wireless & Networks. Might need to reset the APN to default or search and reselect it.
Hi Thanks for the reply.
Yes I have tried to do the search to reselect it but it just searches for a long time as if its hung. Reset to default didn't change anything. (3 three.co.uk stayed putt)
Also I have completely reset my phone to factory default and back to latest streakdroid a few times. In the past I've not had to touch APN it just works after installing whatever rom.
I think I've already tried the most obvious things.
Would flashing the latest baseband help? Assuming it doesn't already come with the latest streakdroid. If it does then its looking like I am screwed unless there is anything else I could look at??
HELP!
Have you tried your USIM in another phone. 3 may have blocked your Internet access as you are using a non-3 phone.
What does your about screen say for your baseband version and stuff?
Baseband version
GAUSB1A130500-EU
Regarding "non-3 phone" I hope thats not the case. I've never had an actual "3 phone" I always use unlocked phone's. Prior to this one an omnia and prior to that a k850i neither of which are 3 phones. I will try the sim in another phone see what happens now. Let you know.
IT IS HIGHLY RECOMMENDED TO UPDATE TO THE BELOW BASEBAND FOR 1.5.1+
Baseband File Download:
Primary Download Site: http://downloads.streakdroid.com/djsteve/amss.mbn
Mirror 1: http://mirror2.streakdroid.com/amss.mbn
I guess u missed this part when flashing 1.9. The recommended baseband for 1.9 is 318.
Delltech you are right I did overlook that. However going back to your last point that 3 may have blocked my internet access. I think your right!! I just tried my sim in another phone and that can't connect to the internet.
Anything I can do if they have blocked my internet??
Call them and speak to tech support, they've got a bunch of cool techies who'll sort it out right away.
Will do.... Thanks!
I was looking to upgrade my x10 to the actual version of x10. the 2.3.3 version it was not out in my country, so i got the worldwide version (the .ftf file). i flashed it with flashtool. it worked perfectly, but the 3g wont turn on no matter what i do, im with rogers, i choose 3g-rogers. it connects, my data is on, roaming is on, but it just doesnt turn on, doesnt show in the statu/notification bar, that it is on like it did before. so i used the pc companion and put the 2.1 back in, it still has the same problem, i put the latest wolf rom, 2.3, and it dont work, no matter which rom I choose. Please help me, give me any suggestions, i need 3g for my work, etc. thanks!
Check your apn settings, if they are not present then you'll have to enter them manually. Use Google or search the forms here for the proper Rogers apn settings.
Sent from my X10i using xda premium
Or try the Sony Ericsson tab from the settings menu, you can download your courier's apn settings there.
Sent from my X10i using XDA App
I had the same problem, flashing to a stock 2.3.3 ROM and then the data connexion wouldn't work. What I did was to install Wolfbreak's TW Custom ROM then immediately applying a custom kernel patch. It worked fine from there.
I don't know if this will help at all but i had the same problem a month ago. what was causing my problem is that my limit of my package was over and i did not have any more credit on my phone (prepaid contract). so 3G would not connect unless i had credits (That's what my carrier told me). so i put credit on my phone but 3G still would not connect. it was kind of "stuck" because my credit was out. so i kept my credit and flashed a new rom (WB's rom). i put the APN manually and my problem was fixed.
So my problem was caused by my credit limitation. once i let my phone without credit 3G would not connect again unless i put credit and reflash the rom again... Crazy huh?
Every case is specific, however i hope it helps you in any way...
haszan1172 said:
I was looking to upgrade my x10 to the actual version of x10. the 2.3.3 version it was not out in my country, so i got the worldwide version (the .ftf file). i flashed it with flashtool. it worked perfectly, but the 3g wont turn on no matter what i do, im with rogers, i choose 3g-rogers. it connects, my data is on, roaming is on, but it just doesnt turn on, doesnt show in the statu/notification bar, that it is on like it did before. so i used the pc companion and put the 2.1 back in, it still has the same problem, i put the latest wolf rom, 2.3, and it dont work, no matter which rom I choose. Please help me, give me any suggestions, i need 3g for my work, etc. thanks!
Click to expand...
Click to collapse
You need to set up your wireless apn go to menu/settings/sony ericsson/settings download then wait a few you will see it flash on then go to back button/wireless & networks/mobile networks/network mode/gsm/wcdma preferred (click it)/access point name there should be two, one wireless/one mmsc. if for some reason you have three make sure that the top one (the house icon 3g) is checked or you will be roaming
And always remember to backup your Settings an APNs,and anything else you need to keep.
Although some of these are free it is always the best to get the pro/key of the apps for more functions and to support the Developers.
Apn backup and restore
https://market.android.com/details?id=com.riteshsahu.APNBackupRestore&feature=search_result
ASTRO File Manager (what's nice about this app is you can send the APKs to your email and then put the apps in the flashtool apps File and just flash them to your phone at the end)
https://market.android.com/details?id=com.metago.astro&feature=search_result
MyBackup
https://market.android.com/details?id=com.rerware.android.MyBackup&feature=search_result
Root Explorer File Manager
https://market.android.com/details?id=com.speedsoftware.rootexplorer&feature=search_result
Titanium Backup root
https://market.android.com/details?id=com.keramidas.TitaniumBackup&feature=search_result
haszan1172 said:
I was looking to upgrade my x10 to the actual version of x10. the 2.3.3 version it was not out in my country, so i got the worldwide version (the .ftf file). i flashed it with flashtool. it worked perfectly, but the 3g wont turn on no matter what i do, im with rogers, i choose 3g-rogers. it connects, my data is on, roaming is on, but it just doesnt turn on, doesnt show in the statu/notification bar, that it is on like it did before. so i used the pc companion and put the 2.1 back in, it still has the same problem, i put the latest wolf rom, 2.3, and it dont work, no matter which rom I choose. Please help me, give me any suggestions, i need 3g for my work, etc. thanks!
Click to expand...
Click to collapse
Is the phone an x10i or x10a? It could be a radio problem, like mine in which I have an x10a but I'm on T-Mobile which only supports EU bands of the x10i.
First of all I would like to apologize for not so perfect English
I have U8650 and i would like to make this topic general topic for it. I know there are few topics but there is no much info in them.
I have made same topic on croatian forum for phones so i think it will be better if its on xda because there are much more people that are good in cooking cracking etc.
So lets begin
Detailed specifications can be seen on the LINK, however, the battery is 1400mAh[/ B] and not 1250 (i have sent email to gsmarena to change it but nothing hapend...)
ROOT and the original ROM
After playing with the phone I wanted too root it, after a good deal of trouble, and around 40 readed topics (without overdoing it) I came up with some knowledge, of course the problem is that the phone is currently on only few markets. (spain, croatia, turkey, australia and china i think)
To root U8650 you should flash it with original Rom, Spanish devices dont need original rom to root dont know why it is but it is
ROM
It is necessary to download an official ROM
LINK
After you download it unrar it and dload folder copy to memory card
Path should look like \ dload \ update
to flash device you need to
turn it off
remove the battery for 5 seconds
put the battery back in
press the buttons "VOL +" + "VOL-" + "ON" (all three keys at once)
and will start automatic firmware upgrade
for 3-4 minutes cell is debranded
If you get error not found firmware that means that you did not put the firmware on the SD card like you should (I got it a few times) just off the device and repeat the procedure.
root
After flashing unbranded firmware we can throw at root
software needed for the root LINK
This is similar to debranding.
download root file
Put it on SD card
turn off the phone
remove the battery for 3 seconds
Press "VOL +" + "ON" (without the vol-)
When you open the "bios like" menu use the volume keys up/down to select the update from memory card called root
after this procedure just reboot the phone and you have rooted phone
UNLOCK
My wife is on vip network so I had need to unlock cell
Recommendation for Tibor Szabo's
[email protected] [/ email]
contact the man, he tells you to pay € 13 at [email] [email protected] [/ email]
Send him mail with the payment for approximately 12 hours with you (he said 2-3 days al always come to 24h)[/SIZE]
if this is forbiden on xda i will remove it
If you have any questions please ask, this all is wrote on xda and some other forums i just put all together
[B]Do not think i am responsible if anything goes wrong I have done in exactly those steps and everything works normally. Everything you do yo do at your own risk.[/B]
So: D after a slightly longer introduction with u8650 came the day to put Custom rom.
Of course, for custom rom you will need root thus described above tutorial.
After puting custom rom phone is like 20% faster
few main features
Integrated flash (load all ads from the flash) loads test flash from Adobe i didnt test it much more because yesterday i put custom firmware
new driver for the camera from turkcell that means 5MP camera resolution
Better battery life
overclock processors at 780MHz (you can set it manualy)
Here is the complete list of modifications that is taken with [URL="http://www.htcmania.com/showthread.php?t=262489"]LINK[/URL]
In principle, this entire tutorial is taken from [B]Zadkyn[/B] and translated becuse he is hard spanish guy nothing is on english he is not very good at answering questions but thanks to him we have custom roms and all the improvements.
list of improvements (in English)
[QUOTE]Overall performance improved a lot (it is also the little battery somprendente Spends now even with the 3G)
-Changed icons graphically and manufactures factory setting, added percentage battery icon factory
-Added adobe flash compatible and running (with the strip overlock well)
-Lower spending on drums (set the minimum cpu for this)
-Restored and changed some other applications (all zipiling passed by lower consumption of RAM)
-GPU rendering enabled
Battery-drain slower, less consumption.
Grate black-on camera to make photo with overlock fixed
Overlock-stable up to 780 (no more restarts) to give to more than 722 problems.
-Added and removed other applications
Overlock-Kernel to 844
Unlocked-Kernel
-Operates any headphones
New menu-configuration, more optimized and icons removed rom China.
Bootanimation custom-added, now you can put your wish bootanimation
-Added run-part BusyBox
-Added Apps2SD
Added bash-shell
Zipalign all-in app
New-look graphic
Huawei-optimized new launcher (and consumed as Zeami or less)
-Fix bootanimation
Init.d-scripts folder added
Scrip-added ramscrip
-Applications optimized to consume less RAM
Boot-unlocked
-Data Applications (to uninstall and market updates)
Root-shell
-Added new root
Application-Acrchivos disassembler (ODEX files only is crap and problems)
Removed sea processes on startup
-Original Sources
-Some of deleted applications including Telstra
-Optimize graphics
New Market-added
New menu-bright
-Back to the white menu
-Implement improvements in order to run 3D accelerated 3D notification bar
Added applications-highly recommended.
-More RAM optimized for removing (less processes on startup)
Optimized sub-mic, and works well, you can check any call recording.
Completely changed-Topic icons like systems.
-Removed garbage Telstra [/ color]
, As implemented VoIP, voice dial ip menu to call.
Configuraccion-optimized menu and changed the color to black.
To-quality photos and video recording improved.
Jpg Image-Viewer improved.
-Pixel camera increased significantly (software, which the Turks have for any)
Best answer-ram and optimization (42m).
-Red 2 g 3g and improved (more coverage)
Energia-saving implemented.
Netfilter-range increased.
Less force-closure errors in some applications as well as more support.
-Some more things.[/QUOTE]
I put 1.5 version because it has corrected a couple of bugs.
Biggest object is that he removed default camera app imho it's not a problem because you can instal lg camera.
So here is tutorial
What you will not learn from linked topic (and I found out by sheer luck) is that you need to install drivers and custom "bios" to be able to put custom rom
So first things first
You will need to do procedure in this topic [URL="http://www.htcmania.com/showthread.php?t=256095"]LINK[/URL]
First download the driver for Windows 7 [URL="http://www.mediafire.com/?3bvp3p42t4iqwt2"]LINK[/URL]
So these are the drivers that you install and run you will have a screen with two options press instal drivers
If you have XP and these drivers dont work download this [URL="http://www.mediafire.com/?20qkr711ceuna0n"]LINK[/URL]
I have W7 so I leave to you if this is working for xp (it should work because no one has yet complained )
The second step is to download this file [URL="http://www.mediafire.com/?k421vgl3xy1fgpa"]LINK[/URL] unzip it and run Instalador.bat
You have fine hacker green screen and bunch of Spanish. luckily it doesn't interest us. Go to the next step and that is putting the phone in Fastboot mode.
The third step unplug the battery cell out/in pressing VOLUME - (or the volume down) and the power button and hold for 10 seconds.
it will show you only the Huawei logo and it should only show you that.
Step Four Connect the mobile phone with the USB cable, wait until computer detects it and after a few seconds go ti fine spanish green screen and press any key
It will flash "bios" of the phone it should be ready in a minute or two there is no hurry.
then reset the cell and you should have a fine new "bios".
Check this by turning off cell battery out / in and press the Volume + (volume up) and the power button for 10 seconds.
It should appear with orange letters like from the picture
[IMG]http://postimage.org/image/2d31ltan8/[/IMG]
After you have fine new "bios" you want to put fine new rom
The first step with this rom download [URL="http://www.mediafire.com/?8qd05qhv5flhips"]LINK[/URL]
The second step is to put the zip in the root of your memory card.
The third step going into the BIOS mod So turn off the cell battery out / in the volume + power button for 10 seconds.
You get orange letter menu now navigate with the volume + and - and with the power Buton you confirm it.
The fourth step choose the factory data wipe, then wipe the cache and then advanced wipe devil cache (not the exact name but you will seen it)
Each time when you choose wipe you need to confirm it, always navigate to yes i want to wipe.
Fifth step Return to start of the BIOS and select the custom recovery and navigate to the zip file called zadkin and select it.
When you choose it will start to flash for me lasted about 4minute when it's finished, reboot the system and if everything went well (and there is no reason why not) you will get the boot menu with zad logo.
For first time cell loaded few minutes so patience.
After that you have a nice Costum rom that is faster and more economical with better battery life stronger processor and better camera
If you have questions feel free to shoot.
The same as in the first part of post you do all on yours risk and I am not responsible for any problems and errors. I did everything according to these instructions and I got what i wanted.
[B]CODES[/B]
codes for the service menu
[B]*#*# 2846579 #*#*[/B]
code for the info on your phone
[B]*#*# 4636 #*#*[/B]
All of this is wroted on few forums and i just wanted to put all in one place on the most visited forum for android (xda)
Also i would very like if someone with more expirience can read this tutorial and suggest something.
one more thing that i left out is RAM limitation and i hope to get some answers about that.
also if this helps someone feel free to thank me
Best regards
just flashed your custom rom without problems. its amazing what people can do..!! it seems based on the yoigo firmware and you have english and spanish as languages. everything you need is included filemanager app2sd etc. i like it very much.. thanks.
edit: could you kindly tell what the flashing of the bios (with pc) exactly is for?! thanks
If you dont flash that bios you cant wiPe devilk cache and you cant instal modified rom so basicly puting new bio is must for moded roms
It will be great if someone else can try this
As for wiping the data, there was only one thing possible to wipe. everything else was just a line of "NO" without option to change it.
I now have like 3 programs running in background thats cool... and of course its cool that many programs are removed that cant be removed otherwise (like documents2go trial)
But thE stock yoigo firmware is good too... It already comes with the possibility to install apps to SD u dont need extra program for that
EDIT :and i just come back to phone.. i left it on charger over night.. and its in the orange BIOS MODE !!!! so it crashed i guess ??? bad
EDIT2: Couldnt access 3g internet even tho i had the right profile .... will test some more
Unofrtunately the custom ROM has still a lot of bugs, be careful :-(
yeah its BS... i am going back to original yoigo at least there i can make it install all aps to SD automatically .... this hacked firmware cant even transfer most new aps to SD..
i hope i will have no problems cos of flashed bios...
thanks anyways both of you
edit: 2 more bugs.. adblock dont work (some java error crash) and the 11mb adobe flash cant be copied to sd or removed at all
out of 27 apps (a few downloaded by me) 7 can be copied to SD and 20 cant
is there anyone who tested cyan mode for this phone ?
this guy
http://translate.google.de/translat...ania.com/showthread.php?p=2880783#post2880783
check that forum out they also have Cyanogen7.2-benru89 [Android 2.3.7] [LEDs] !!
do anybody knows how to make back key to just leave app and not go to home screen
i have instaled cyan 7.2 spartan 1.2 ver and when i enter app drawer and start app lasts say camera i push back key and it lands me in home screen and not in appdrawer.
hope you understand what i am saying
problem
I had a problem when i tried to root my phone. I copyed the zip file into my sdcard but it could find the file.
I got other things in my sd if it matters idont know.
I would be very thankfull if someone could help me!
huawei u 8650 phone is dead
hi ,after installing official firmware ,my phone got brick.i also made backup with cwm recovery,but now my phone only show black screen only alittle blink of light when i push power bottom,how can i solve this problem
I don't understand, if you root your phone yo unlock it from its carrier? I mean, free to use with whatever sim card from any mobile company?
Didnot work on U8652
12/14/11: I tried the rom upgrade on U8652 ATT fusion and received "install error' after unpacking.
Any suggestions?
12/15/11: I successfully installed the 'recoveryclockmod' after finding the proper android usb driver for winXp - 'pulse drivers'
then installed the custom rom. But the phone details on the installed custom rom says its a U8650 model not U8652.
Thanks OP
Thanks OP
I followed your instructions and installed recoveryclockmod and cyanogen_u8650-benru on my U8652. Now I finally have root and a nice ROM to play around with. Thanks OP
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
dark0153 said:
Does the root part work on a Huawei U8650 Sonic that came with android 2.3.5 and newer ROM ( U8650V100R001C343B851 ) ?
I need to root it to be able to use reverse USB tethering
Click to expand...
Click to collapse
Try with
http://unlockroot.com/
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
sipe1 said:
Try with
unlockroot.com
From lastest version they support huawei U8650. You can always put recovery and custom rom (google htcmania or read first post)
Click to expand...
Click to collapse
unlockroot doesn't work, i tried the latest version (2.2) and i get the same error "Failed to get shell root !"
I have fried my U8650
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
friedroid said:
I attempted a firmware update (official)... stage one completed... phone restarted and got stuck with a grey screen (no logo nothing just blank grey screen) all the soft buttons are turned on. constantly.
It wont go in to recovery, a simple touch to the power button turns it on and then it wont turn off unless I take the battery out.
I tried flashing with DC unlocker but my system wont detect it, I have installed the drivers provided at huawei site.
the phone was just a week old and am real pissed.
worst part, i did all that after reading this post
Anyone has any idea, how i can get it to work once again.
Click to expand...
Click to collapse
I didn't try this method and I'm only suggesting it because it sound like you almost bricked your phone.
You could try installing ClockworkMod recovery using fastboot (here is a guide for that androidforums.com/sonic-all-things-root/476263-root-guide.html just follow 1-9 ) and then flash the original rom for your phone (I found a list of stock roms here android.modaco.com/topic/350367-huawei-u8650 )
Dont forget to wipe data/cache before flashing the new rom ( this might be the cause for the state your phone is in now )
Update:
Got the drivers by installing hi space and letting it search for appropriate drivers. Worked real smooth.
Now Computer detects phone. But the instalador.bat keeps on searching for device :S
Stuck and stumped once again.
I want to believe but all I see is darkness... or a mildly lit lcd with greyness to be precise. thoughts, ideas anyone.
Thanks man. A ray of hope finally.
Only one problem.
My system won't detect the phone. When i plug it in via usb, it turns on. I mean all the buttons turn on, screen turns dark grey from dead black. But that is it. Computer wont detect it. I am running on windows 7.
Another system detected it which was running on XP but it wouldn't accept the drivers.
HELP VIDEO FOR ANDROID NEWBIES TO HELP THEM CHANGE ROM FROM 2.2 TO 2.3 CM7
http://www.youtube.com/watch?v=RULPBh4cDYU
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
http://www.youtube.com/watch?v=MfnoUB8EFOI VIDEO LINK TO THE CM7 ROM DEMO
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
Download this file CLOCKWORK MOD- http://www.mediafire.com/?4mio3rwhhmjw5aq
steps to load cwm recovery
1-Load dell drivers on ur pc which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after installation is finished
4-Then you can see DELL logo after reboot.
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA button to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive dell venue cm7 2.3 rom!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
option2:Also u can go to cm7 settings menu and find option to boot into cwm recovery in dell phone itself(no need of pc to run cwm).However u need the GOOGLEAPPS FLASHABLE file on ur sdcard to flash it in cwm recovery in any case...option1 or option2.
Same process needs to be followed to install another update for ussd/mmi codes.
Download this package http://mirror2.streakdroid.com/manii/misc/USSD Fix/update-USSDfix-2.zip and flash it in same way as gapps was done.This would solve ur problem of ussd codes( * # kind of calls) as well.
NOTES:
ONE MAY FACE REDUCED BATTERY BACKUP IN THIS CM7 ROM,
I HAVE FOUND A WAY FOR IT, BY USING SETCPU application WHICH COMES IN THIS ROM AS BUNDLED.
MY SETCPU SETTINGS ARE:
1-START ON BOOT CHECKED
2-PROFILES ENABLED CHECKED. TWO PROFILES ADDED FIRST IS "SCREEN OFF" SET TO "POWERSAVE" AND SECOND PROFILE "IN CALL" SET TO "CONSERVATIVE"
*IF U GET STUCK AT BOOT AFTER INSTALLING ZIP OF CM7 FILE FROM CWM, U SHUD SIMPLE FOLLOW 2 STEPS. DO AL DATA WIPE,CACHE WIPE AND DATA RESET.THEN FLASH CM7 AGAIN WITHOUT RESTARTING PHN.THIS WILL SOLVE BOOT LOOPING PROBLEM IF ARISES.
THESE SETTINGS GIVE ME EXTRA BATTERY BACKUP OF ABT 3/4HOURS.
hirentherock555 said:
On demand of some of the very new to android users, im posting a relatively easy to understood upgrade process from 2.2 froyo to 2.3 cm7(custom rom).
Remember both these roms(cm7 and miui) are rooted roms.It voids the warranty.
All credits given to the respective developers of the softwares/firmwares shown in this thread.Im just here to make the process more easy to understand.As developers say, DO IT ON YOUR OWN RISK
CM7 FLASHABLE FILE- http://www.mediafire.com/?f90c9utsp8luknd
GOOGLEAPPS PACKAGE- http://goo-inside.me/gapps/gapps-gb-20110828-signed.zip
COPY BOTH THESE FILES ON TO UR SDCARD(SAME FOLDER OR SEPERATE FOLDERS) BEFORE U PROCEED ANY FURTHER!
steps to load cwm recovery
1-Load dell drivers which we call adb drivers which i found on my dell mem card folder named ADB_Tethering_Driver.U will find these drivers on this forum also if you dont have it in.
2-setuo fastboot mode on your dell handset
Setting up fastboot:
Turn Device off
Move ringer to UP position
Hold down Power and Volume Down
This will show fastboot mode is on.
3-Download and install cwm
How to Install CWM?
Download this file - http://www.mediafire.com/?4mio3rwhhmjw5aq
Start recovery.exe and Extract all files
U will see file named Install CWM.bat.
Run that file and now plug ur dell venue to usb cable(venue is still in fastboot mode as we did it before)
Follow instructions on the dos screen to make ur dell venue load cwm recovery.
Your DELL Venue will reboot after install finished
4-Then you can see DELL logo
Immediate you press Volume UP+DOWN
5-Once you're in the CWM recovery before you flash the ROM zip, you need to :
a. Wipe data/Factory Reset)
b. Wipe Cache Partition
c. Wipe Dalvik Cache
Use vul + - key to toggle the menu and go to INSTALL UPDATE option in that menu.Again on next screen u will be asked to choose update file selection.Option name i forgot may be "INSTALL UPDATE FROM SDCARD".
Select the CM7 file which you downloaded earlier and copied to sdcard.Select and click CAMERA botton to start installation.It will take about a minute or two to complete installation.
5-As installation finishes, you will see the msg - UPDATE COMPLETED.Then u need to go back to the previous menu and select REBOOT SYSTEM NOW.Finish that step.
Thats done!You are into the world of smoother, faster , interactive world of dell venue cm7 2.3 firmware!
You wont be able to cnnect to any of google applications at this time.
To enable google account and apps, u need to follow all the earlier steps and again go into the cwm recovery mode and install the GAAP packge which u have downloaded with cm7.The process will be same...update from sdcard,select gaap file and reboot.It should not be a big deal.
Click to expand...
Click to collapse
Thanks
Super cool and simple explaination quite helpful. Will try this.
But are there any bugs in this update?
Also if possible is there any rollback method if we get stuck or mobile bricks?
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
hirentherock555 said:
I did not find any bugs in cm7 as yet...havent tried miui rom yet.
CM7 is supercool rom.You would love it.Its 10times better than the 2.2 inbuilt rom dell give.
Rollback would require stockroms(which r available on his forum i think).
Unbricking method post is also given in this forum.Check and do the diligence at ur own risk.
Click to expand...
Click to collapse
Worked as said
Thanks a ton mate
Also just trouble was needed to download google apps which was never done by me ever
Asphalt 6 HD roxs now
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
Yes flashed with google apps zip
Camera is good to very good 8 MP
HD video also is good
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
hirentherock555 said:
i have updated the step by step process with additional mmi code solution also into the last paragraph.U can check it.
I dnt knw why, my cam is giving bad results with backcover on and better result when i take cover off.Can u check in ur cam result of both ways? and let me knw?
Click to expand...
Click to collapse
Sure
Guess you must try cleaning the cover lence once
Still will update you on the same
hirentherock555 said:
Fantastic!
So atlast u installed google apps rom also na?After flashing with cm7?
Tell me how is camera performance in ur dell device?
On gsmarena i saw many people praising the camera but i found it really awefully bad!
Wondering oif cam in bad in my handset only?
Click to expand...
Click to collapse
took it to test today
used it as normal as i always do
but battery drain observed was high than stock
half a day by 3 noon my fone waz 20 %
unplugged at 7am
on stock at this time i would be 60 %
just use opera and whatsapp
any suggestions?
will clearing battery stats help?
heard it makes things worst
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Above all should help though.
hirentherock555 said:
here are some suggestions:
1: in stock rom when wifi is on and connected to a router, and u went away from in wifi area, it will stop searching for wifi.When u will enter in same wifi zone again, u wont get auto connected to wifi.
Whereas in cm7, after leaving wifi area with wifi on(and connected), upon returning to wifi area again, u will find venue connected to that wifi network automatically.
This means wifi is continuously looking for connection in cm7 but not in stock rom.Make appropriate changes to try and enhance battery life.
Click to expand...
Click to collapse
I am not using wif fi
I am on 2G EDGE mate
2:SETCPu application
Use this application to save battery.I used it today and felt the difference.
Click to expand...
Click to collapse
Any suggested settings?
3:Set brightness levels to zero rather than auto.
We have to change our habits of using phones to save battery.Thats a hard fact!
Click to expand...
Click to collapse
Thats not an issue done that
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
hirentherock555 said:
1ST CLICK ON SETCPU - RUN ON BOOT CHECK
GO TO PROFILES AND ADD 2 PROFILES
1ST SELECT "SCREEN OFF" AND SELECTOR SCALLING "POWERSAVE"
2ND SELECT "IN CALL" AND SELECT SCALLING "CONSERVATIVE"
iM USING THESE SETTINGS TODAY.
cELL FULLY CHARGED AND DISCONNECTED POWER AT 8.30AM MORNING.
iTS 5PM NOW AND BATTERY LEFT IS STILL56%
i HAVE WIFI ALWAYS ON AS I HAVE ROUTER AT HOME.
i HAVENT USED MUCH OF INTERNET THOUGH.
AS PER BATTERY USE MENU TLL NOW FROM MORNING,
DISPLAY IS USED FOR 1.3HRS.
VOICE CALL DATA SHOWS 52MINUTES
WIFI USED FOR 8.30 HOURS AS WELL.
i THINK ITS DECENT BATTERY BACKUP IF I KEEP THESE SETTINGS.
YES PERFORMANCE SEEMS TO BE SLIGHTLY LESS WITH SETCPU.ABT 10-15% LAG IN PERFORMANCE.BUTS I WILL TAKE THAT.
Click to expand...
Click to collapse
Thanks will try that
Also wanted to know can we flash dell stage UI 1.6 in this rom?
It is there here somewhere but I dont know as havnt tried
No idea abt stage ui as i really didnt like it and neither want it.
U amy try searching forum for tht.
Google Apps with audio/video ability
Gapps with gtalk audio/video ability
http://goo.im/gapps/gapps-gb-20110828-newtalk-signed.zip
Has anyone tried the above?
havent trid.also the link u shown there does not work.
Try uploading on medafire.
It would be great if all users here can press SUBMIT THREAD button on top of the page so that this thread can feature on xda home page and people get to know about it.
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
TheManii said:
talk2 (the one with video chat) wont fully work on the V because it has no FFC.
It might otherwise work to recieve video/voice though, but it cant send video.
Click to expand...
Click to collapse
Wont the back camera work for this?
just curious
Did the setcpu settings help u?
hirentherock555 said:
Did the setcpu settings help u?
Click to expand...
Click to collapse
Was on your settings before I re formatted my cell.
Was going okish..
But when I reformatted it, made sure the battery was full and then wiped battery stats.
Now I am onn without setcpu, goes for 10 to 13 hrs max with few calls, whatsapp always on, mails, etc.
Will go on with this for a month. Then check with setcpu if it gives any difference.