Hello,
Im trying to install foliomod1.4 comming from cm7 RC2.
from clockwormod recovery v3.0.1.4 i wiped data/factory reset.
When trying to install update.zip it says:
installing update...
installation aborted.
I have tried the foliomod 1.4 rom and the stockfolio rom with the same error.
anyone here have a solution?
Thnx
ibila said:
Hello,
Im trying to install foliomod1.4 comming from cm7 RC2.
from clockwormod recovery v3.0.1.4 i wiped data/factory reset.
When trying to install update.zip it says:
installing update...
installation aborted.
I have tried the foliomod 1.4 rom and the stockfolio rom with the same error.
anyone here have a solution?
Thnx
Click to expand...
Click to collapse
You need to flash Clockwork recovery 3.0.0.5 thats available in this forum. it will wipe your system properly. If it dont work( but it will) you have to go the fastboot way.
installed 3.0.0.5 but still no go.
Fastboot..does this involve using adb?
How does it work?
while in 3.0.0.5 i try to whipe i get the following:
Data whipe complete.
e: cant mount /cache/recovery/log
e: cant open /cache/recovery/log
e: cant mount /cache/recovery/last_log
e: cant open /cache/recovery/last_log
ibila said:
installed 3.0.0.5 but still no go.
Fastboot..does this involve using adb?
How does it work?
Click to expand...
Click to collapse
Did you format ssystem and data cache and dalvik?
ibila said:
while in 3.0.0.5 i try to whipe i get the following:
Data whipe complete.
e: cant mount /cache/recovery/log
e: cant open /cache/recovery/log
e: cant mount /cache/recovery/last_log
e: cant open /cache/recovery/last_log
Click to expand...
Click to collapse
never mind that it wipes anyhow. Go to mounts and storage and format system,data,cache and then you go to advanced and wipe dalvik cache.
Thans for the quick reply and the effort.
Whiped dalvink but when installing update.zip it still says:
Installing update....
Installation aborted.
Sent from my HTC Desire using XDA App
ibila said:
Thans for the quick reply and the effort.
Whiped dalvink but when installing update.zip it still says:
Installing update....
Installation aborted.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
This is strange aare you using the apply update zip option orr fflash zip from sd-card?
nickwarn said:
This is strange aare you using the apply update zip option orr fflash zip from sd-card?
Click to expand...
Click to collapse
tried both.
When i try to install the rom it will give the error within a second..like it is not even trying. I checked the sd-card and the update.zip is there.
It seems like recovery isnt even trying to open it.
Tried it with and without signature check. still no go!
ill give it one more try with the stock rom.... maybe i had a bad download.
nope..still no go.
when i verify signature...it says signature verification failed.
ibila said:
tried both.
When i try to install the rom it will give the error within a second..like it is not even trying. I checked the sd-card and the update.zip is there.
It seems like recovery isnt even trying to open it.
Tried it with and without signature check. still no go!
ill give it one more try with the stock rom.... maybe i had a bad download.
Click to expand...
Click to collapse
Yes something stinks thaats for sure. I had damaged memory on my folio but eeven theen it started the install. I would download again andrenaame the file from update zip to whatever.zip and insstall from sd card. Or else you will need a functioning Adb setup to use fastboot. Do you have that?
I have to ask the obvious, the downloaded file you have, did you extract it? Just sso you havent put it straight to sd-card. I have done that sometimes then remembered that FolioMod zip has to be extracted and there is the flashable zip.
i will setup adb tomorrow. have to go to work now though.
Thank you for you time and efford...
Is there a way to uninstall clockwork and use the standard recovery instead?
OMG.... i feel like such an idiot right now....hahahaha
I am so used to flashing whatever zip on my htc desire that i didnt think of that.
Its flashing right now.
Thank you for refreshing my memory and Sorry for wasting your time.
Your my new hero
ibila said:
OMG.... i feel like such an idiot right now....hahahaha
I am so used to flashing whatever zip on my htc desire that i didnt think of that.
Its flashing right now.
Thank you for refreshing my memory and Sorry for wasting your time.
Your my new hero
Click to expand...
Click to collapse
i have done it my self several times. But it always makes me feel like a idiot.
Glad your up and running
Related
I posted this in the general forum but I think its best be in here. Sorry to the mods for placing it in the wrong place. Please delete the other one.
I am trying to reinstall KaosFroyo on my HTC Eris via ClockworkMOD and I am getting a error that says
E:Can't symlink /system/xbin/arp
E:Failure at line 65:
I have tried multiple other roms and I formated my SD card and wiped everything. I am thinking I need to do something with adb or flashing another clockwork recovery?? I am not sure
I have included the ClockworkMOD recovery.log.
Any ideas??
Search is down or something. I had the same problem they told me that Clockwork and the eris dont get along. Long story short I tried many different things and eventually the phone just completely bricked. I would say check the checksum on the rom to make sure it doesn't have any errrors and let me try and find my post about it and see if we have the exact same issue or not
Edit: Looks like our issues are slightly different take a look through there maybe?
http://forum.xda-developers.com/showthread.php?t=731104
metzy75 said:
Search is down or something. I had the same problem they told me that Clockwork and the eris dont get along. Long story short I tried many different things and eventually the phone just completely bricked. I would say check the checksum on the rom to make sure it doesn't have any errrors and let me try and find my post about it and see if we have the exact same issue or not
Edit: Looks like our issues are slightly different take a look through there maybe?
http://forum.xda-developers.com/showthread.php?t=731104
Click to expand...
Click to collapse
ok I hope its not bricked!!
ok i looked at that thread but not sure which step I need to take can you help?
the only recovery I can get into is the clockwork one
Dumb answer here have you tried a different rom or re downloading the one you have. I am as much a noobie as you. Do you have a boot loader with S-on or S-off?
Edit: for Sh*ts and giggles what rom are u trying to flash??
putnum said:
ok I hope its not bricked!!
Click to expand...
Click to collapse
As a rule, Clockwork recovery is not recommended on the Eris. It causes many problems, and yours may be one of them. Amon recovery is much safer. You probably need to search about replacing Clockwork with Amon...I think there is actually a thread out here to tell you how that's done.
http://forum.xda-developers.com/showthread.php?t=760080
ok i did that and now whenever i install a rom I get assert failed:write_raw_image.. and something about my sd card
Could my sd card be bad????
putnum said:
ok i did that and now whenever i install a rom I get assert failed:write_raw_image.. and something about my sd card
Could my sd card be bad????
Click to expand...
Click to collapse
Could be just a bad download. MD5 the zip file on your sdcard.
Ummm actually technically this is wrong section to. This isn't Q&A section.
Sent from my HERO200 using XDA App
May be a dumb question, but did you wipe data and dalvik before trying to flash a new rom?
You said you were using clockwork before (which I know very little about), but do you have any (amon ra created) nandroids that you could flash? Perhaps you created one when you first rooted.
If all else fails, try unrooting and rerooting your phone.
Sent from my nonsensikal froyo using XDA App
putnum said:
ok i did that and now whenever i install a rom I get assert failed:write_raw_image.. and something about my sd card
Could my sd card be bad????
Click to expand...
Click to collapse
I would say the SD card may need to be mounted and formatted (or possibly unformatted) in recovery if the ROM you are trying to use requires it. That is, before you flash the new ROM. I would say though that you will lose data when you prep the SD card from recovery
ok i swapped out with a new sd card and still same issues. It gives an error about busybox so i want to know how to use adb and flash busybox can anybody tell me how I can do that?
putnum said:
ok i swapped out with a new sd card and still same issues. It gives an error about busybox so i want to know how to use adb and flash busybox can anybody tell me how I can do that?
Click to expand...
Click to collapse
OK, what ROM are you trying to Flash and what did you flash over? I am using KaosFroyov34...busybox is included. I think a previous poster is correct...I think you need to do a full wipe, a Dalvik wipe and them reinstall your ROM.
trying to instakk kaosfroyo v32 and i already tried wiping everything and re-downloading and still no go.....
getting error
E:Can't symlink /system/xbin/[
E:Failure at line 5:
symlink busybox SYSTEM:xbin/[
Installation aborted.
putnum said:
trying to instakk kaosfroyo v32 and i already tried wiping everything and re-downloading and still no go.....
getting error
E:Can't symlink /system/xbin/[
E:Failure at line 5:
symlink busybox SYSTEM:xbin/[
Installation aborted.
Click to expand...
Click to collapse
Try v34...that might help you.
DoubleByte said:
Try v34...that might help you.
Click to expand...
Click to collapse
ok trying now....
putnum said:
ok i did that and now whenever i install a rom I get assert failed:write_raw_image.. and something about my sd card
Could my sd card be bad????
Click to expand...
Click to collapse
The SD card is formatted fat32? right?
Yes it is....
ok while i am waiting for v34 to download i have been doing some reading about this and it seems like it only happens when the system partition gets full.
http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/310581/cant-symlink/#
How can I erase what I do not need in /system ?
putnum said:
ok while i am waiting for v34 to download i have been doing some reading about this and it seems like it only happens when the system partition gets full.
http://android.modaco.com/content/t-mobile-pulse-pulse-modaco-com/310581/cant-symlink/#
How can I erase what I do not need in /system ?
Click to expand...
Click to collapse
Well, first you need to know what you need to get rid of, then you need something like root explorer to mount R/W and delete the files. I'd be very careful about doing this, and someone more experienced than me will have to tell you how to do it better/faster. My guess as to why it's full though is flashing a different ROM over another (say Kaos over Tazz) without wiping. Because different ROMS use different install scripts, you wind up leaving leaving files that needed to be deleted. When you go from one version of a ROM to another of the same ROM, the scripts usually knows what to delete, replace, etc.
I have an Atrix, I have Prebeta4 install working great. I downloaded beta.zip placed in root of /sdcard reboot into recovery, install from zip I get an error "Can't open /sdcard/beta.zip"(bad). Installation Aborted
I also noticed something wired after I installed prebeta4. I now have "/mnt/emmc/" this is actually my sdcard. Im a bit confused as to why I get the failed install. When i place beta.zip in /mnt/emmc then reboot into recovery I dont see the beta.zip file.
I have tried to wipe data/cache and Dalvik no success.
Where did i go wrong? thanks
Zer0dbm said:
I have an Atrix, I have Prebeta4 install working great. I downloaded beta.zip placed in root of /sdcard reboot into recovery, install from zip I get an error "Can't open /sdcard/beta.zip"(bad). Installation Aborted
I also noticed something wired after I installed prebeta4. I now have "/mnt/emmc/" this is actually my sdcard. Im a bit confused as to why I get the failed install. When i place beta.zip in /mnt/emmc then reboot into recovery I dont see the beta.zip file.
I have tried to wipe data/cache and Dalvik no success.
Where did i go wrong? thanks
Click to expand...
Click to collapse
In Cyanogenmod setting -> Applications u must have checked "Use Internal Storage".
Unchecked it and reboot. U should be just fine.
Sent from my MB860 using XDA App
Zer0dbm said:
I have an Atrix, I have Prebeta4 install working great. I downloaded beta.zip placed in root of /sdcard reboot into recovery, install from zip I get an error "Can't open /sdcard/beta.zip"(bad). Installation Aborted
I also noticed something wired after I installed prebeta4. I now have "/mnt/emmc/" this is actually my sdcard. Im a bit confused as to why I get the failed install. When i place beta.zip in /mnt/emmc then reboot into recovery I dont see the beta.zip file.
I have tried to wipe data/cache and Dalvik no success.
Where did i go wrong? thanks
Click to expand...
Click to collapse
There is an already dedicated CM7 thread. U should try asking there first because it helps in keeping the information consolidated and clean.
Sent from my MB860 using XDA App
try to redownload the file via wifi.
and yes you should keep this in the proper thread.
help.
wont boot past cwm recovery window on the internal card
reflashing to the cm-7-team-b-beta1-signed.zip does not remedy it
recovery window has errors
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
should i try the unbuntu fix ?
i know nothing about adb and or drivers for android devices btw... so unless the guide is VERY detailed im boned
maxxcool7421 said:
help.
wont boot past cwm recovery window on the internal card
reflashing to the cm-7-team-b-beta1-signed.zip does not remedy it
recovery window has errors
E:Can't mount /cache/recovery/command
E:Can't mount /cache/recovery/log
E:Can't open /cache/recovery/log
E:Can't mount /cache/recovery/last_log
E:Can't open /cache/recovery/last_log
should i try the unbuntu fix ?
i know nothing about adb and or drivers for android devices btw... so unless the guide is VERY detailed im boned
Click to expand...
Click to collapse
Thats how my tablet got fixed, use the ubuntu method and let me know if you have troubles flashing it I'll be glad to help you, I've done it 3 times lol
megaghostgamer said:
Thats how my tablet got fixed, use the ubuntu method and let me know if you have troubles flashing it I'll be glad to help you, I've done it 3 times lol
Click to expand...
Click to collapse
No dice, hangs on "writting zeros's to ml0" ... i see a alternative method that does the same thing... guess i will try it..
maxxcool7421 said:
No dice, hangs on "writting zeros's to ml0" ... i see a alternative method that does the same thing... guess i will try it..
Click to expand...
Click to collapse
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
megaghostgamer said:
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
Click to expand...
Click to collapse
I did the exact same thing with rom manager on the NT. :< There should be big flashing warning signs that say "DONT DO THIS IF YOU'RE TIRED"
I wound up having to ADB to the device, completely wipe the partition table with gdisk, then rebuild it. However, the scripts to acutally format it werent avaliable anymore (Dropbox account was banned) so I then had to use the Ubuntu restore method to go from there.
I did loose the ability to run the B&N Factory ROM (wont pass registration anymore)
but at least the tablet is useable.
Dont give up, from what I understand, unless you physically BREAK the tablet in some way, its nearly always recoverable!
lag0matic said:
I did the exact same thing with rom manager on the NT. :< There should be big flashing warning signs that say "DONT DO THIS IF YOU'RE TIRED"
I wound up having to ADB to the device, completely wipe the partition table with gdisk, then rebuild it. However, the scripts to acutally format it werent avaliable anymore (Dropbox account was banned) so I then had to use the Ubuntu restore method to go from there.
I did loose the ability to run the B&N Factory ROM (wont pass registration anymore)
but at least the tablet is useable.
Dont give up, from what I understand, unless you physically BREAK the tablet in some way, its nearly always recoverable!
Click to expand...
Click to collapse
Yup true! To pass sign up, http://www.youtube.com/watch?v=sAASnHPn4PM&feature=youtu.be by albert wertz.
megaghostgamer said:
What SD Card do you have and what class? Sorry I fell asleep but im back on. Also what GB Tablet do you have and what are you running? Can you still boot up and is there anywhere you can get to factory reset ( clear data ) cause thats whats looking like your problem. I had that problem on my HTC Hero CDMA I freaked and then I cleared data and rebooted back into recovery and error was gone
Click to expand...
Click to collapse
Ha! maybe im not that dumb after all. although the ubunut failed, the tool here worked http://forum.xda-developers.com/showthread.php?t=1663836 but /slap! forhead/ i still have the cym recovery img on the unit ... so i think i will try this:
go back and set up the SD cm7 alpah boot that worked to boot the SD
boot in and update rom manager
install stock recovery img
then try the new link again!
as for the stick:
Sandisk - its pretty generic and came with my htc glacier...
16 bg nook table
it came with 1.4.1 image
put on cm-7-b-teamb-signed
installed few apps, *tried* to start installing gapps to get gplay and the google framework
then i got a splat
then i flashed it back again
seemed ok
it wasnt
it locked up
powered down
reboot = duuurp
after that i did not READ... booted into recovery and selected (wait for it) reset.. and cleared the user data.
after that i swore enough to get people to come to my office and look concerned... took advil... read.... cried... threatened...
now im here
maxxcool7421 said:
Ha! maybe im not that dumb after all. although the ubunut failed, the tool here worked http://forum.xda-developers.com/showthread.php?t=1663836 but /slap! forhead/ i still have the cym recovery img on the unit ... so i think i will try this:
go back and set up the SD cm7 alpah boot that worked to boot the SD
boot in and update rom manager
install stock recovery img
then try the new link again!
as for the stick:
Sandisk - its pretty generic and came with my htc glacier...
16 bg nook table
it came with 1.4.1 image
put on cm-7-b-teamb-signed
installed few apps, *tried* to start installing gapps to get gplay and the google framework
then i got a splat
then i flashed it back again
seemed ok
it wasnt
it locked up
powered down
reboot = duuurp
after that i did not READ... booted into recovery and selected (wait for it) reset.. and cleared the user data.
after that i swore enough to get people to come to my office and look concerned... took advil... read.... cried... threatened...
now im here
Click to expand...
Click to collapse
Personally. I wouldnt mess with Rom Manager. That's what bricked my tablet, too.
Just make an SD card with the CWM bootables (I posted a link in your other post about noob questions) and install roms/etc from there.
I think that's what's killing my gnex!
*This Jedi master be a Ninj-ESS*
hrm i missed it? (the other thead link to bootable cym)? i did try to repartition once on another bootable build but the cym did not like it... even after reinserting it
i had that problem before because i accidently formatted the 1gb user partition while in cm7...
this link saved me. try it out!
http://forum.xda-developers.com/showthread.php?t=1513583
still bricked. *tried* to use rom manager to install the "stock recovery" but it still boots to a "cardboard box".......
starting to think the partitions are whacked...
what is the best partition recovery guide ??
looking at this link...
http://forum.xda-developers.com/showpost.php?p=22157605&postcount=25
but the bootable cwm is not loading...grr
If I am correct you are still trying all of this from inside a bootable cm7 card, right?
Instead, try this http://forum.xda-developers.com/showthread.php?p=25786947
With that hopefully you can get a bootable cwm recovery image.
From there you should be able to install CM7.
I CANNOT STRESS ENOUGH. DO NOT USE ROM MANAGER.
I honestly think it is most of your problems
Sent from my Nook Tablet using xda app-developers app
lag0matic said:
If I am correct you are still trying all of this from inside a bootable cm7 card, right?
Instead, try this http://forum.xda-developers.com/showthread.php?p=25786947
With that hopefully you can get a bootable cwm recovery image.
From there you should be able to install CM7.
I CANNOT STRESS ENOUGH. DO NOT USE ROM MANAGER.
I honestly think it is most of your problems
Sent from my Nook Tablet using xda app-developers app
Click to expand...
Click to collapse
i think i am ready to agree about rom manager... will try the link in a sec.. thanks
not to sound entirely stupid... should i use the 8-16gig recovery? or the 16gig recovery? :silly::silly::silly:
16 gig. Assuming you have a 16gig NT!
Sent from my Nook Tablet using xda app-developers app
maxxcool7421 said:
not to sound entirely stupid... should i use the 8-16gig recovery? or the 16gig recovery? :silly::silly::silly:
Click to expand...
Click to collapse
meh, balls out, lets go 8-16 1st
!!! ok got into recovery console ....
maxxcool7421 said:
!!! ok got into recovery console ....
Click to expand...
Click to collapse
now looking up how to use then connect via adb and run these commands... http://forum.xda-developers.com/showpost.php?p=22157605&postcount=25
Hi guys,
As the title said, Galaxy Player 5.0 Wifi got soft-bricked during the flash process. Now, it stucks at the loading screen with the samsung text only. I can still get to the Recevery and Downloading mode but up till now I have tried flash many stock ROM, factory reset without hope. I believe that it's the software conflicting problem or problem with the bootloader
Please help me with this, my friend ask me to flash it to Cyanogen Mod 9 and I bricked his player. That's really bad for both of us. Before any thingies, it run on Froyo and on the back cover, it said YP-G70CW/ Made in CHina
Please help me with this soon ( any suggestion is appreciated
Hello my friend!I will say again:
ALWAYS WHATEVER IS HAPPENING,BEFORE FLASHING A NEW ROM YOU MUST BACKUP THE CURRENT SYSTEM FROM CWM!!!
If you have this,you may go to back-up and restore in CWM,restore and vouala you have again your current rom.
If you have not made a system Back-Up (also Nandroid backup) you will have to download a new rom,send it to your device in downloading mode and then install this.
I can suggest you the ROM CM9 that I use because its just awesome.Just a little prob with the preloaded microSD card.
What device do you have?INTL or USA?
Actually, I'm having the .zip file of CM9 from this topic as well : http://forum.xda-developers.com/showthread.php?t=1679957
However, even though I can connect my phone to the computer, use ODIN to root it and flash the .zip file after factory reset, etc. , the situation is still the same :-< It stay stuck at the samsung logo like forever
I believe I'm using an Intl one because it has hot physical home button. However, the back cover read: YP-G70CW Made in China. Therefore, I don't know which ROM should I flash??
do you follow ALL the instructions from this thread?
baladev said:
do you follow ALL the instructions from this thread?
Click to expand...
Click to collapse
I did. I did the factory reset and deleted cache, etc. before installing the .zip file. :-<
did you do this in CMR:
Wipe data/factory reset
wipe cache and wipe dalvik cache
?
To wipe dalvic cache go to advanced section in CWM
dimosthenisK said:
To wipe dalvic cache go to advanced section in CWM
Click to expand...
Click to collapse
yes, i meant CWM, mistyped it..
I did them all too. However, for the Dalivik cache, it does not show up text at all, just a little flash nothing changes. What seems to be wrong here is that every time I finish an action, it show up 4 line of errors like: can't mount to cache/..../recovery.log. Is that the problem??
Yes thats the problem.You may have locked the internal SD...Try formatting you external SD and then pass your zip again,this may fix the problem
If system can't mount it's files,there is no way it will load.
I took the external SD card out, formatted it and flashed the CM9 again. No luck
The four lines of error read like below, they keep appearing every time I do something:
E:Can't mount /cache/recovery/log
E: Can't open /cache/recovery/log
E: Can't mount /cache/recovery/last_log
E: Can't open /cache/recovery/last_log
tranvutk said:
I did them all too. However, for the Dalivik cache, it does not show up text at all, just a little flash nothing changes. What seems to be wrong here is that every time I finish an action, it show up 4 line of errors like: can't mount to cache/..../recovery.log. Is that the problem??
Click to expand...
Click to collapse
Those errors are common within using CWM for the Galaxy Player 5. If you rebooted the device, it will most likely go away. There is no need for concern.
if i want to select "choose zip from sdcard" i get status 0, E:Can't mount /scard/
also sideload isn't working
* failed to write data 'protocol fault (no status)' *
what can i do?
I want to install CM10.1 on my Archos G9 Turbo Flash.
So, i will throw the Archos away...
oidenburga said:
if i want to select "choose zip from sdcard" i get status 0, E:Can't mount /scard/
also sideload isn't working
* failed to write data 'protocol fault (no status)' *
what can i do?
I want to install CM10.1 on my Archos G9 Turbo Flash.
Click to expand...
Click to collapse
Alright then. Does the sdcard work on the stock rom/other devices?
About your comment of throwing you device away:
Why throw device away if CM does not install on it?
julle131 said:
Alright then. Does the sdcard work on the stock rom/other devices?
About your comment of throwing you device away:
Why throw device away if CM does not install on it?
Click to expand...
Click to collapse
thanks for the answer
with sdcard, i mean the internal sdcard
so it is impossible to install any rom
oidenburga said:
thanks for the answer
with sdcard, i mean the internal sdcard
so it is impossible to install any rom
Click to expand...
Click to collapse
So you can't install stock from SDE?
Have you tried the "reformat device" option inside SDE? If you are going to try it, remember to have stock rom ready. The tablet will ask it after formatting.
hm, i havent tried to install stock, because i thought that this will be the same as installing CM
i will have a look at this
http://forum.xda-developers.com/showthread.php?t=2165648
I dont know where to put the "archos.ext4.update"
I am not able to get fiels on /mnt/storage/
____________________________________________
I put the "archos.ext4.update" on the internal storage, and make all like the instruction, but the i stuck in a bootloop
oidenburga said:
http://forum.xda-developers.com/showthread.php?t=2165648
I dont know where to put the "archos.ext4.update"
I am not able to get fiels on /mnt/storage/
____________________________________________
I put the "archos.ext4.update" on the internal storage, and make all like the instruction, but the i stuck in a bootloop
Click to expand...
Click to collapse
So was the install of stock successful? I think you should get the stock working before trying other custom ROMs.
And after getting the stock back, then to check other roms.
Bootloop? ROM starts loading and then boots again? Hmm... As its stock-based ROM, it shouldn't do that when you are coming from stock.
Get the stock working, and then format your /data from SDE.
Sent from my GT-I9100 using xda app-developers app
No it wasnt.
It stucks at the Archos Logo.
And now i am not able to get in the recovery anymore
oidenburga said:
No it wasnt.
It stucks at the Archos Logo.
And now i am not able to get in the recovery anymore
Click to expand...
Click to collapse
SDE is the only official recovery. The CWM functioned like a small custom ROM. Did you also try the reformat device option?
Sent from my GT-I9100 using xda app-developers app
julle131 said:
SDE is the only official recovery. The CWM functioned like a small custom ROM. Did you also try the reformat device option?
Sent from my GT-I9100 using xda app-developers app
Click to expand...
Click to collapse
I will test "reformat".
and then i am going to install stock rom.
i hope so