Help - How to install VillainROM-v13.0.0 - Hero, G2 Touch Q&A, Help & Troubleshooting

I'm trying to install VillainROM-v13.0.0
I have a HTC Hero
I have booted into recovery, by pressing down "Volume down key" and the "end call/power button"
but I dont know how to select the rom file from my sd card
Can anyone help ?

No you boot into recovery by pressing home and power/end call then wipe data/factory reset and cache then flash the villain v13

Just to be sure about that. Did you root your phone?

Related

Help please

I installed the stock firmware via odin but now my sgs2 is in boot-logo-loop please help me!
If the flash went all good which im guessing it did as you are trying to turn you phone on do this.
1. Turn your phone off
2. Hold Volume up + Home + Power on
3. This will bring up a menu with some options on it, select wipe data/factory reset then select wipe cache partition
4. Then on this Menu pick Reboot System
should work if it doesnt after this try reflashing your ROM.

[q] help!!! Did i brick my phone!!!

I downloaded starwars rom followed instructions now i am stuck a the front screen were it says to touch. will not proceed says "process com. android phone has stopped unexpectedly". I was fully rooted and using bootstrap. How do i get back into bootstrap. I have plugged into wall with phone off and bootstrap will not start. HELP
newalker91 said:
You HAVE to flash it over Alien rom using bootstrap. These roms are not meant to be flashed without unlock in the first place, it's pretty random that it even somewhat works with boostrap. What you need to do is SBF back to stock, unlock your bootloader, load up a recovery, flash alien, make a backup, relock your phone, root and install bootstrap, restore alien backup, then flash star wars rom. Make sure you read carefully before flashing roms because you can easily brick your phone missing info like that.
Click to expand...
Click to collapse
I understand, but how do i get back into bootstrap is my question??
Thanks
trevoc1 said:
I understand, but how do i get back into bootstrap is my question??
Thanks
Click to expand...
Click to collapse
If you get stuck and want to try a factory reset, here are the instructions provided by Motorola:
1) Power off the phone, press and hold volume down button, press power button
2) Screen will come up with "Fastboot", press Vol down key to cycle through choices until you get "Android Recovery", then press Vol up key
3) Wait for the "triangle ! / Android" screen then go on to step 4
4) Press both Vol up and Vol down key simultaneously. A menu will come up
5) Use the Vol Down key to select "wipe partition" by pressing the power button.
6) Once that is done continue to step 7.
7) Tap on Vol down key until "wipe data/factory reset" is highlighted, and tap Power key. Another Confirmation screen will come. Tap on Vol down key until coming to Yes and tap Power key
8) After userdata is cleared, the "reboot system now" option will be highlighted by Default. Tap Power key
9) Phone will reboot to initial setup screen.

Phone stucked on CM7 logo

Hi,
my girlfrend has a HTC Legend and some time ago I flashed her phone with CM7, don't remember exactly the steeps but it was a very long procedure (something with gold card, ruu, etc...). It was also rooted.
Now her phone started to crash on opening any application and now it doesn't boot anymore, it is stuck on CM7 spinning boot logo...
I don't know what to do, I have a Galaxy S2 where I can boot in recovery mode and wipe cache, dalvik or install new ROM.
Here what I managed to do is to start the phone with Volume Down + Trackball + Power into a menu (it say HBoot 1.01) but here I don't know what to do .
Please help !
Thank you.
Nobody please?
How can I do a factory reset/clear data?
muntos said:
Nobody please?
How can I do a factory reset/clear data?
Click to expand...
Click to collapse
When you are in the bootloader menu use the vol-down / vol-up-buttons and go to recovery, then press power. You see a red triangle. Then press vol + and the power button. You are now in the blue recovery menu. Goto wipe data/factory reset and then to wipe cache partition.
Then you can reboot.
Good lock!
alligator_asl said:
When you are in the bootloader menu use the vol-down / vol-up-buttons and go to recovery, then press power. You see a red triangle. Then press vol + and the power button. You are now in the blue recovery menu. Goto wipe data/factory reset and then to wipe cache partition.
Then you can reboot.
Good lock!
Click to expand...
Click to collapse
Thank you thank you thank you !
Solved my problem by wiping data and cache
Many thanks !

[Q] How to install the "voice call" mod?

Hi there,
I'm fairly new to Android and in this week, I managed to root my Galaxy Tab 10.1 (P7500) with ICS - so I'm glad that worked out
Now, I really want to install the "voice call mod" for my stock ICS - original thread: http://forum.xda-developers.com/showthread.php?t=1875024
But can someone please give me detailed steps, as I have no idea how to "Make the Recommended Backup", How to install the two files and how to wipe the cache.
I do know how to go to Recovery Mode - If I understand correctly, that is when I power off my tab and then power it on, by pressing on the Power button + Volume Down - then press Volume Down and then Volume Up to access Recovery Mode?
Can someone please elaborate on this for me, so that I can also install this without "breaking" or "bricking" my tablet LOL
Thanks so much!
To get into recovery, power your tab off.
Then, hold down the volume down button and the power button until you see the Galaxy Tab splash screen. You can then release the power button, but continue holding down the volume down button.
Eventually, you'll get a screen with two icons - a box on the left with an arrow exiting the top (recovery) and a flashing Android with the word "Downloading" below it. Release the volume down button.
Now, use the volume down button to move the blinking highlight to the left. That's the recovery icon. Once it's blinking, press the volume up button to select it. Volume down will move the selection back and forth.
after success entering recovery mode there an option to do backup..
then do ur backup from this option..
after that u can proceed flasing what ever u need..
I know what to do, but How?
k1mu said:
To get into recovery, power your tab off.
Then, hold down the volume down button and the power button until you see the Galaxy Tab splash screen. You can then release the power button, but continue holding down the volume down button.
Eventually, you'll get a screen with two icons - a box on the left with an arrow exiting the top (recovery) and a flashing Android with the word "Downloading" below it. Release the volume down button.
Now, use the volume down button to move the blinking highlight to the left. That's the recovery icon. Once it's blinking, press the volume up button to select it. Volume down will move the selection back and forth.
Click to expand...
Click to collapse
Hi, Thanks for the update. I know how to do this part, but when I enter recovery mode, all I see is:
1 Reboot
2 Install from External Storage
3 Wipe data/Factory Settings
4 Wipe Cache Partition
etc etc
Where do I go to do the Backup and where do I then go to install those two files of the " voice call mod"? And then, how do I wipe the cache?
Can you please explain these parts to me - The page for the voice call mod gives the instructions as to what to do, but I want to know "how" to do it.
Thanks so much
southafrican said:
Hi, Thanks for the update. I know how to do this part, but when I enter recovery mode, all I see is:
1 Reboot
2 Install from External Storage
3 Wipe data/Factory Settings
4 Wipe Cache Partition
etc etc
Where do I go to do the Backup and where do I then go to install those two files of the " voice call mod"? And then, how do I wipe the cache?
Can you please explain these parts to me - The page for the voice call mod gives the instructions as to what to do, but I want to know "how" to do it.
Thanks so much
Click to expand...
Click to collapse
what recovery are you using? if it is the stock one, it wont do, use clockworkmod recovery
francescopp said:
what recovery are you using? if it is the stock one, it wont do, use clockworkmod recovery
Click to expand...
Click to collapse
So if I understand correctly, I should then use an APP to make the backup - like Titanium Backup - so the backup is not done in Recovery Mode?
Then after that, I go to recovery mode and install the "modem" files and wipe the cache?
So, how do I then install the files and wipe the cache...Can you please give exact steps as to what to do and how for each of these steps.
Thanks
Rom manager app can do backup your current ROM.
Sent from my GT-P7500 using Tapatalk 2

stuck at android system recovery 3e

Hi,
as title says i'm stuck at android system recovery 3e. All I did was turning on the phone and it went straight into this recovery and stuck there. I tried all of the options there (apply update from cache, wipe cache partition, wipe data/factory reset,...) but nothing changed. I've searched and read forums about it and they suggested to go into download mode by pressing volume down button + camera button + power button and then use program called Odin. The problem is that i'm using Atheros XP7400 mobile phone and i have only volume down/up button and power button.
Any ideas how can I get into download mode?
Thanks for answers
88blended said:
Hi,
as title says i'm stuck at android system recovery 3e. All I did was turning on the phone and it went straight into this recovery and stuck there. I tried all of the options there (apply update from cache, wipe cache partition, wipe data/factory reset,...) but nothing changed. I've searched and read forums about it and they suggested to go into download mode by pressing volume down button + camera button + power button and then use program called Odin. The problem is that i'm using Atheros XP7400 mobile phone and i have only volume down/up button and power button.
Any ideas how can I get into download mode?
Thanks for answers
Click to expand...
Click to collapse
anyone?

Categories

Resources