Related
okay.... i tried every single 2.3 ROM and i keep having the same problems.... constantly REBOOT (
i did exactly what they told me in the instruction but the same thing happen in every 2.3 ROM
any ideas?
thanks
Baseband problem? Try turning it off, open flash tool, while it's off, hold the back key while you plug in the USB cable (that's connected to your PC that has PC companion drivers and Flash tool drivers) and reflash the FTF file for .71 (for official ROMs).
After its done, boot up and see what happens.
If not, give more detail on what went wrong.
JMeister234 said:
Baseband problem? Try turning it off, open flash tool, while it's off, hold the back key while you plug in the USB cable (that's connected to your PC that has PC companion drivers and Flash tool drivers) and reflash the FTF file for .71 (for official ROMs).
After its done, boot up and see what happens.
If not, give more detail on what went wrong.
Click to expand...
Click to collapse
thanks dude... problems solved
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
I have problem Pc companion sees my X10 mp like "big" X10 and installing X10 drivers. I can browse my files on card etc but I can't flash kernel in Flashtool I have error no drivers installed.When I pick up my phone in Flash mode my PC freeze and I mus restart PC . I haven't got this problem earlier. My x10Mp is running on nAa 11 kernel.
EDIT
OK I know solution of PC freeze I must run PC in safe mode But Pc companion detect big X10 not x10mp and when I turn phone in flash mode phone is in flash mode about 10 sec then phone normal starts
EDIT2
Sorry for my bad English
try the repair option in PC Companion, it will let you select your model, instead of PC Companion detecting it, you can get to it without even attaching your phone to your computer, just plug it in when it asks you for it (which is the connect in flashmode stage). maybe that way it will work
You will be back on stock firmware, but i guess that can be fixed again.
Hello guys, i need help ..
I wanted flash this custom ROM on my LwW, so I rooted device, installed CWM, unlocked bootloader, wiped data/cache/dalvik and flash it. But now is phone lagged on boot screen (ŠONY logo) ... i cant go to CWM, when i want restore via SUS, it says: The phone contains modified software that cannot be updated; and flashtool lags in flash process in text - Reading device information.
Can I do anything? Please help. :crying: thanks
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
I two days ago we had many problems with Flashtools ... In the middle of Flashing the device stopped working always the same error 31. I tried for over 30 vezez and sometimes not recognize the computer. Oh I did so I removed the battery from the phone and I slept early the other day when I woke up I was flashing again and it was the first time I was really surprised. I ran back to Stock GB Rom with kernel bboof ....
Good ! :beer::thumbup:
.:goutham:.
gouthamthemostwanted said:
Flashtool should work. Make sure you install the flashtool drivers properly, then,
1. open flashtool
2. Shut down your mobile
3. Connect data cable only to the computer.
4. press and hold only the volume DOWN button in your device and plug in the cable to the phone and the notification led should light up green indicating that the phone is into flash mode then it should be recognized by flashtool.
(make sure the flashtool drivers are properly installed and the USB port you are using in your computer is high speed USB port)
.:goutham:.
Click to expand...
Click to collapse
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
deryck.vyhybkar said:
Still lags on "Reading device information" .. but i relock bootloader via toolkit by quangnhut123, next SUS recognized device and i flashed back to 4.0.4 stock ROM .. next i tried flash Real ICS r6 ROM, but that same progress like before (phone lags on SONY logo, and i cant do anything) .. what Im doing wrong? When i flashed, i had rooted 4.0.4 stock ROM, fw .578, unlocked bootloader, installed CWM...
Click to expand...
Click to collapse
Which kernel you are using ?
did you wiped everything before installing custom rom ?? (data,system, cache, dalvik cache)
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
RevolverForce said:
I flashed the wrong rom on my Xperia Z2, I tried fixing it by flashing tft file, but I couldn't even get the device into flashmode (Power + Vol up), It just never vibrates, when I put it in the charger it just keeps blinking red.
What's the proper fix for this? and is this a soft-brick or hard-brick? Please help.
Click to expand...
Click to collapse
Flashmode is not Power button + Volume up. But...
Connect USB to ur computer
Then Hold the Volume Down key on your phone while u connect the USB Cable to the phone.
If you successfully get to flashmode, then u can flash an FTF file for ur phone. (This will also wipe internal sd files if you don't untick 'data' under wipes) Then again, phone might not boot properly if you don't wipe as u said something about custom ROM.
OR Follow these steps I found on Sony website
1. Download the PC Companion software from http://www.sonymobile.com/gb/tools/pc-companion/
and install it on your PC.
2. Install and open PC Companion then select Support Zone.
3. Phone Software Update.
4. Start.
5. Repair Phone
6. Continue
7. Accept data removal
8. Next
9. Wait for prepare
10. Select Phone
11. Follow the connection steps
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
RevolverForce said:
Tried using flashtool with Vol down buut
18/058/2014 23:58:26 - ERROR - Drivers need to be installed for connected device.
18/058/2014 23:58:26 - ERROR - You can find them in the drivers folder of Flashtool.
I'm sure that I have the drivers installed as I tried earlier today to unlock the bootloader through flashtool (which didn't really work out) and it recognized the device just fine.
right now it doesn't even show the Sony logo..I'll try PC Companion method in seconds..
EditC Companion is asking me to make sure that the battery level is above %80, when I was flashing the new rom, the battery level was around %50, should I care about this, or is it just an extra precaution? because I don't really see a way for me to know the battery level.
Click to expand...
Click to collapse
I'm sure 50% is enough to install through PC Companion unless ur battery is bad.
And do you by anymeans use windows 8? If you do, Did you disable driver signature while installing Flashmode, Fastboot and Z2 drivers from the C:\Flashtool\drivers folder, or where ever u installed flashtool to.
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
RevolverForce said:
I believe I didn't disable driver signature, I connected the device to a different usb port too just to be sure, my OS is windows 8.1.
PC Companion is updating the phone right now, I'll see how it turns out and report back to you, thanks.
Edit:It worked, my phone is alive, thank you, stanley <3
Click to expand...
Click to collapse
There's no keeping that Bad Boy down! Cheers mate!