i flash the "wpa_adhoc-signed.zip" to unable connection to the adhoc network
and after that , the wifi don't work "unable to start wifi"
I wonder if there is a fix for this...
You may have to re-flash your mod/rom
Or use seus.
Did you make a xrecovery backup?
no i didn't make any xrecovery backup , and i don't want to loss any things by re-flash my firmware ,i am using the orginal se 2.1 firmware ,are there any file or any way making the wifi work ,please?
This sounds similar to the problem I have:
http://forum.xda-developers.com/showthread.php?t=1031878
ztryfe said:
This sounds similar to the problem I have:
http://forum.xda-developers.com/showthread.php?t=1031878
Click to expand...
Click to collapse
Ok, For starters:
1. Check if other devices (not computers) can connect to your network.
2. CHeck if your device can connect to other networks.
3. Check if your ISP's modem has correct settings so that it doesn't block devices other than computers.
Lots of people are having the same sort of the problem.
The x10 hates some modems
jamal.daboul said:
no i didn't make any xrecovery backup , and i don't want to loss any things by re-flash my firmware ,i am using the orginal se 2.1 firmware ,are there any file or any way making the wifi work ,please?
Click to expand...
Click to collapse
Try flashing the latest baseband using flashtool and dont forget to uncheck "Wipe user data" so you won't lose your files
jamal.daboul said:
no i didn't make any xrecovery backup , and i don't want to loss any things by re-flash my firmware ,i am using the orginal se 2.1 firmware ,are there any file or any way making the wifi work ,please?
Click to expand...
Click to collapse
Do a backup of your ROM now, re-flash your ROM and then do an advanced restore of the Data partition.
jamal.daboul said:
i flash the "wpa_adhoc-signed.zip" to unable connection to the adhoc network
and after that , the wifi don't work "unable to start wifi"
Click to expand...
Click to collapse
Hey any luck figuring it out? Im still without wifi
Related
Hello,
The Lite'ning ROM 1.5 just came out
ANd I have a question about one point of the changelog :
21/06/2011
Now with official XXKF2 Firmware
Modem XXKF2
Added CF-Root 4.0 kernel for XXKF2
VoIP-SIP support
Support PhoneCall Recording support
Now also added the read tweak for ext SD-card
Increase the Wi-Fi Scan Interval to save battery
Lower the call Ring Delay
Removed WiFi Sharing to save battery
Click to expand...
Click to collapse
My question is about what I put in red bold.
I use the Kies Air application.
Will it continue to be functionnal ? or will it be not working ?
I may misunderstanding what the "Wifi Sharing" is
Thanks for your answer
Miles
MilesTEG1 said:
Hello,
The Lite'ning ROM 1.5 just came out
ANd I have a question about one point of the changelog :
My question is about what I put in red bold.
I use the Kies Air application.
Will it continue to be functionnal ? or will it be not working ?
I may misunderstanding what the "Wifi Sharing" is
Thanks for your answer
Miles
Click to expand...
Click to collapse
From my understanding wifisharing is for using usb tethering. Litepro is currently creating a zip with this application so it can be put back for people that tend to use it.
Ok thanks
But now, I have some noob questions...
What is exactly "usb tethering" ?
Another noob question I guess : I already have 1.4 on my phone,
Do I need to wipe all data before flashing ? Or juste flash will work and I won't loose my data ?
Thanks for your answer
MilesTEG1 said:
Ok thanks
But now, I have some noob questions...
What is exactly "usb tethering" ?
Another noob question I guess : I already have 1.4 on my phone,
Do I need to wipe all data before flashing ? Or juste flash will work and I won't loose my data ?
Thanks for your answer
Click to expand...
Click to collapse
USB Tethering is so you can use the data connection on your phone for say your laptop. No need to wipe the data, just flash 1.5 straight over the top. I have just installed 1.5 and i can't go to settings/manage applications without getting a Force close error.
djayyy said:
USB Tethering is so you can use the data connection on your phone for say your laptop. No need to wipe the data, just flash 1.5 straight over the top. I have just installed 1.5 and i can't go to settings/manage applications without getting a Force close error.
Click to expand...
Click to collapse
Thanks for the answers
May I wait before flashing ? Because if you get some force close...
Do you think you have this force close because of not wiping before flashing ?
MilesTEG1 said:
Thanks for the answers
May I wait before flashing ? Because if you get some force close...
Do you think you have this force close because of not wiping before flashing ?
Click to expand...
Click to collapse
It appears that this is a common problem on the 1.5 firmware at the moment.Alot of people are getting force close errors. I would hold off upgrading for now if i was you. I have gone back to KE7 for now.
djayyy said:
It appears that this is a common problem on the 1.5 firmware at the moment.Alot of people are getting force close errors. I would hold off upgrading for now if i was you. I have gone back to KE7 for now.
Click to expand...
Click to collapse
Ok thanks for the advise
I'll wait for an upgrade
LitePro is aware of the FC-Problem and will Fix it...so wait for a new Version befor flashing ... I will wait too
from what i understand the "wifi sharing" that has been removed is the one that only the samsung apps use. NOT the actual wifi sharing through android... eg. hotspot. As i am able to freeze wifisharing and wifi sharing manager through titanium backup and can still usb tether and wifi hotspot.
SGSLover said:
LitePro is aware of the FC-Problem and will Fix it...so wait for a new Version befor flashing ... I will wait too
Click to expand...
Click to collapse
Yes ^^ I'll do that too ^^
andejx said:
from what i understand the "wifi sharing" that has been removed is the one that only the samsung apps use. NOT the actual wifi sharing through android... eg. hotspot. As i am able to freeze wifisharing and wifi sharing manager through titanium backup and can still usb tether and wifi hotspot.
Click to expand...
Click to collapse
Ok, but is Kies Air still working without wifi sharing ?
MilesTEG1 said:
Yes ^^ I'll do that too ^^
Ok, but is Kies Air still working without wifi sharing ?
Click to expand...
Click to collapse
Not on my phone because that's a samsung app.
EDIT: But I don't know how litepro has disabled it. If he has just frozen/deleted it outright then all keis probably won't work. Unless he's found some way of disabling it except for kies.
andejx said:
Not on my phone because that's a samsung app.
EDIT: But I don't know how litepro has disabled it. If he has just frozen/deleted it outright then all keis probably won't work. Unless he's found some way of disabling it except for kies.
Click to expand...
Click to collapse
Hello,
I frozze with MyBackupPro the "Wifi Sharing manager", and "Partage Wifi" and I try to launch Kies Air. ANd It worked So it is not related
Hi guyz ! I have tried as many as 10 roms and today i reverted back to void forever rom from mik rom. Suddenly i cant get the internet to work. The APN settings are perfect and the installation was smooth(I am sure because i have already done it a million times.). Please help ! I reinserted the sim card but still the same state. the upward arrow in the data transfer is working where the download is not. Please help !
karthikus said:
Hi guyz ! I have tried as many as 10 roms and today i reverted back to void forever rom from mik rom. Suddenly i cant get the internet to work. The APN settings are perfect and the installation was smooth(I am sure because i have already done it a million times.). Please help ! I reinserted the sim card but still the same state. the upward arrow in the data transfer is working where the download is not. Please help !
Click to expand...
Click to collapse
Did you wiped everything?
Did u install official gingerbread prior o this? If so, downgrade your baseband
S i did. But after flashing the official gingerbread, i flashed stock froyo using KDZ and the internet was working and after that i flashed MIK CM7. Andi wiped everything. ANy suggestions...?
karthikus said:
S i did. But after flashing the official gingerbread, i flashed stock froyo using KDZ and the internet was working and after that i flashed MIK CM7. Andi wiped everything. ANy suggestions...?
Click to expand...
Click to collapse
Internet working so it is solved?
No internet was workin only on official stock Froyo and now i cant add gmail account in it. Browser works fine on official froyo. But when i create a google account, i get "cant establish reliable data connection " error .
k . to be precise, i have the official Froyo v10E installed via KDZ. Installed Vodafone GPRS settings. Browser works fine. But when i add google account, i get "cannot establish a reliable data connection" error.
I was on MIK CM7 rom when the data was working fine, then i installed official gingerbread via KDZ tool. And then i installed Froyo through KDZ tool. Any suggestions
bump please help !!
karthikus said:
bump please help !!
Click to expand...
Click to collapse
Check your APNs. If they are fine, then re-flash. Faced this issue when I flashed my first ROM.
Reflashed the ROM, Double checked the APN. Even cleared the cache and installed the Void forever rom again. Still i cannot establish connection with the google servers. I just doubt whether this has something to do with the flashing of official gingerbread. Any suggestions. ??
karthikus said:
Reflashed the ROM, Double checked the APN. Even cleared the cache and installed the Void forever rom again. Still i cannot establish connection with the google servers. I just doubt whether this has something to do with the flashing of official gingerbread. Any suggestions. ??
Click to expand...
Click to collapse
Try to revert to the old baseband and start all over again. Good luck!
I reflashed the old baseband and reflashed a froyo rom Devoid-froyo-final. Now data is not working. Even the browser. I am sure about vodafone settings. What else could be the problem.>>??
karthikus said:
I reflashed the old baseband and reflashed a froyo rom Devoid-froyo-final. Now data is not working. Even the browser. I am sure about vodafone settings. What else could be the problem.>>??
Click to expand...
Click to collapse
Not sure dude. Search the forums if anyone has the same issue.
try a different Sim card. also keep a minimum balance. if balance is zero net will never work, even with data pack active.
also restore the apn to default from menu options.
karthikus said:
I reflashed the old baseband and reflashed a froyo rom Devoid-froyo-final. Now data is not working. Even the browser. I am sure about vodafone settings. What else could be the problem.>>??
Click to expand...
Click to collapse
#try resetting device using secret code 3845#*500#
or
#try any other sim card
or
flash new rom and see wether same problem presist
jebaclament said:
#try resetting device using secret code 3845#*500#
or
#try any other sim card
or
flash new rom and see wether same problem presist
Click to expand...
Click to collapse
Tried all the above still i cannot connect to google servers. In the stock ROM flashed via KDZ, the browser is working fine but i cant connect to google servers. Should i take the phone to service center??>>??
karthikus said:
Tried all the above still i cannot connect to google servers. In the stock ROM flashed via KDZ, the browser is working fine but i cant connect to google servers. Should i take the phone to service center??>>??
Click to expand...
Click to collapse
Okay i got ur problem.The apn u use is a wap apn which can open only browser.Try using a gprs apn.In your apn settings u will see 2 apns of vodafone.set the other as default.
Thanks for the HELP guyz ! Atlast it was a FU**ING problem with vodafone . When i called the customer care, they said many users from my city has reported the problem and now its resolved. Thanks GUYZ [email protected]!
karthikus said:
Thanks for the HELP guyz ! Atlast it was a FU**ING problem with vodafone . When i called the customer care, they said many users from my city has reported the problem and now its resolved. Thanks GUYZ [email protected]!
Click to expand...
Click to collapse
The best way of saying thanks is by hitting the THANKS button...
hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
what to do? this rom is awesome, impressively fast than stock 2.3 on my x10, but without internet, it's useless....
thanks in advance
fael097 said:
hi, I just installed this custom rom on my x10i, it went all fine, but problem is that I no longer have internet connectivity. 3g won't work (I can turn on, but it won't show, and I can't download configurations from where it was previously, nothing shows up under settings>sony ericsson) and also, wi-fi isn't working. whenever I try to turn it on, it says "error" and won't turn on.
Click to expand...
Click to collapse
Have you done dalvik-cache wipe and erased cache partition? Also,are you on .71 baseband?
For wifi, have you flashed its kernel modules?
fael097 said:
... , but without internet, it's useless....
Click to expand...
Click to collapse
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free
The wifi could also mean that you havent flashed your roms wifi modules zip normally done in xrecovery
Sent from my CM7 Zmod / doomkernels v6 UL BL X10!
(And all that without bricking it) so far atleast.
HeliumX10 said:
Your opinion But I am using same ROM without data plan and I am happy Sometimes wifi in restarnts in the streets are enough and free
Click to expand...
Click to collapse
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys
now I can't enter xrecovery anymore... so I went to troubleshooting:
Q: I'm experiencing problems with my xRecovery?
A: Make sure you have the latest version of xRecovery if Wolf hasn't included it yet.
You can get it HERE. Flash this over current recovery and should be fixed.
Click to expand...
Click to collapse
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?
Suggest Back from Beginning
fael097 said:
now I can't enter xrecovery anymore... so I went to troubleshooting:
but there's only a .zip version of the xrecovery, I can't flash it through flashtool. and I obviously can't enter xrecovery to install xrecovery again. god this is confusing. what to do?
Click to expand...
Click to collapse
ZIP cannot be flashed in PC's Flashtool, but in Xrecovery my friend. TFT is for PC flashtool. If you wanna back where you begin, i suggest you follow this link's method. Worked as promised
http://forum.xda-developers.com/showthread.php?t=1196421
For ensuring your Future of changing new ROMS. Feel free to Send private message if got more doubts TQ
whitefang
fael097 said:
if I only had wi-fi. but I don't have any kind of internet right now heh
I did everything I was supposed to:
Factory Reset (Full wipe)
Wipe Cache Partition
Wipe Dalvik Cache
then I installed the rom, and flashed the FTF package
it says baseband 2.1.71 and kernel 2.6.29-00054 and etc. is that right?
the only thing I flashed was this FTF file. do I have to do anything other than that? idk how to flash my roms wifi modules, really new to this thing.
thanks guys
Click to expand...
Click to collapse
Try Full wipe again (ALERT THAT YOUR DATA WILL LOSS in your PHONE) if you can. THEN ,FOLLOW link i sent ya before and their instructions, videos. Best way is watch and learn. Have a nice day.
sincerely,
whitefang
PS: if you don't want to restart, you may have to find links that contains your downloaded WF ROM either is for unlocked/locked. Normally, wolfbreak will put its module links at his/her first post.
Feel free to PM if you want. Try my best
Hi, I'm from Venezuela and this is a traduction made by Google's translator... I have a problem with my X10 mini pro (u20a), while putting on a rom I tried and did everything they asked: restore with PC companion, root and install XRecovery, but when I started it I came back because I needed a different type of baseband and compilation number and could not find how to change them. I decided to leave it, uninstalled everything that had been installed to the ROM (zroot, superuser and the servant to see the phone files), un-root and when I wanted to restore with PC companion a notification tells me "There is no software available for phone. Please try again later." If anyone knows how to fix this problem or have already solved this link (there are more than 2000 posts to locate one by one) would really appreciate it I HOPE FOR YOUR HELP, THANK YOU!
rafadro said:
Hi, I'm from Venezuela and this is a traduction made by Google's translator... I have a problem with my X10 mini pro (u20a), while putting on a rom I tried and did everything they asked: restore with PC companion, root and install XRecovery, but when I started it I came back because I needed a different type of baseband and compilation number and could not find how to change them. I decided to leave it, uninstalled everything that had been installed to the ROM (zroot, superuser and the servant to see the phone files), un-root and when I wanted to restore with PC companion a notification tells me "There is no software available for phone. Please try again later." If anyone knows how to fix this problem or have already solved this link (there are more than 2000 posts to locate one by one) would really appreciate it I HOPE FOR YOUR HELP, THANK YOU!
Click to expand...
Click to collapse
I will speak good english so u can translate
I beleive that your problem is that u dont click repair phone when opening pc companion go software update then click software update but before click next,,click the underlined word repair wish this helps
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
No, when I connect my phone with PC Companion, click on support zone, software update, it shows me that I have the latest version of the software then I click on repair, I do everything: disconnect the phone, turn off and turn on pressing back key, but when I do all these steps, PC Companion gives me this message: "There is no software available for phone. Please try again later." I hope you can understand
rafadro said:
No, when I connect my phone with PC Companion, click on support zone, software update, it shows me that I have the latest version of the software then I click on repair, I do everything: disconnect the phone, turn off and turn on pressing back key, but when I do all these steps, PC Companion gives me this message: "There is no software available for phone. Please try again later." I hope you can understand
Click to expand...
Click to collapse
I understand but I dunt know what to do
sent from my u20i xperia x10 mini pro running mini cm9 3.0.2 on nAa ics 3
THX nAa. VERY MUCH!!!
Try to flash this ROM with flashtool, it is based on stock sony-ericsson firmware.
Installing it will give you the right baseband to flash other ROMS, and will probably enable you to do a repair in PC Companion in the future too.
I will do it, but I don't know how to flash and it's for u20i but my phone is u20a, that doesn't give problems? Thanks a lot!!
rafadro said:
I will do it, but I don't know how to flash and it's for u20i but my phone is u20a, that doesn't give problems? Thanks a lot!!
Click to expand...
Click to collapse
I've checked.. the difference between the E20i and E20a is in the UMTS HSPA frequencies.
The E20i supports 900 and 2100
The E20a supports 850, 1900 and 2100
As far as i can see that is the only difference between the two.
I don't think there is much difference software-wise.
If you really use 3G just check if you have any issues there.
If there is an issue, I will try and help you find a u20a stock rom
You already rooted and installed xrecovery, just copy the rom to your sd-card, reboot into recovery, wipe data/factory reset, wipe cache, go into advanced, wipe dalvik-cache, wipe battery-stats, press back for main menu and install zip from sd-card, choose custom zip, select the rom and wait for it to finish. you should be fine.
but, all the tutorials I've found I need a different type of baseband, because that I didn't install any rom. My baseband is M76XX-TSNCJOLYM-53404006 and the baseband who I need is M76XX-TSNCJOLYM-53404015
yes, and the rom i pointed you too is based on stock sony-ericsson firmware, with that baseband, that's why i think it will help you.
SmG67 said:
yes, and the rom i pointed you too is based on stock sony-ericsson firmware, with that baseband, that's why i think it will help you.
Click to expand...
Click to collapse
try to install this rom, and then I tell if it worked, thank you
So problem is i cant turn on my wifi..I tried everything i found on internet,even flashed stock firmware and same happens again.
When i go to data/misc/wifi/config i can see mac adress of wifi adapter,but when i go in wifi settings theres no adress.Some galaxy nexus users had same problem as me and they needed to send their phones to service to replace PCB.As we simillar hardware to Gnexus u assume its same problem with mine L9,but i hope someone had same problem and found solution.
Wifi worked till this morning.
Thanks in advance
n0p3zz said:
So problem is i cant turn on my wifi..I tried everything i found on internet,even flashed stock firmware and same happens again.
When i go to data/misc/wifi/config i can see mac adress of wifi adapter,but when i go in wifi settings theres no adress.Some galaxy nexus users had same problem as me and they needed to send their phones to service to replace PCB.As we simillar hardware to Gnexus u assume its same problem with mine L9,but i hope someone had same problem and found solution.
Wifi worked till this morning.
Thanks in advance
Click to expand...
Click to collapse
I got that problem sometime when there're some error occur during phone boot up. Did you try to delete data/misc/wifi folder and then flash stock rom?
artit said:
I got that problem sometime when there're some error occur during phone boot up. Did you try to delete data/misc/wifi folder and then flash stock rom?
Click to expand...
Click to collapse
Deleted few times,flashed stock 2 times and nothing,tried different roms and still mac is unavailable...
Can you tell me one thing,do you have nvram file in system/etc/wifi,mac adress is stored there too.I had simillar problem on friends ZTE Skate,but writing wifi mac in that file solved problem.I dont have that file so i think thats the problem.So if you have it can you upload it(without your mac) and give it to me so i can copy it anbd try that way
n0p3zz said:
Deleted few times,flashed stock 2 times and nothing,tried different roms and still mac is unavailable...
Can you tell me one thing,do you have nvram file in system/etc/wifi,mac adress is stored there too.I had simillar problem on friends ZTE Skate,but writing wifi mac in that file solved problem.I dont have that file so i think thats the problem.So if you have it can you upload it(without your mac) and give it to me so i can copy it anbd try that way
Click to expand...
Click to collapse
I don't have L9 now, it belong to my brother. Maybe some one can help you, if not I'll post it tomorrow.
From my knowledge, in CM rom, wifi MAC is written at boot and it use some function from RIL (baseband) library. Maybe you flash incorrect or incompatible kdz/baseband? But that should not happen with stock rom so I'm not sure what the problem.
Did you try to full wipe your phone? Format /data (delete all files not just wipe it) and remove your sdcard then reboot after flash rom or kdz.
artit said:
I don't have L9 now, it belong to my brother. Maybe some one can help you, if not I'll post it tomorrow.
From my knowledge, in CM rom, wifi MAC is written at boot and it use some function from RIL (baseband) library. Maybe you flash incorrect or incompatible kdz/baseband? But that should not happen with stock rom so I'm not sure what the problem.
Did you try to full wipe your phone? Format /data (delete all files not just wipe it) and remove your sdcard then reboot after flash rom or kdz.
Click to expand...
Click to collapse
I was using CM11 when this happened and i tried reflashing rom,but nothing happened,i restored my original stock rom(one the phone came with) and same thing happens...