Well I just want to share my experience with this launcher on defy. Still in beta, need to improve alot of things (configuration, more widgets...). But looks promising. I really like it. The big problem -at least for me- is that runs a bit slow. I think the program eats too much memory since my cpu monitor shows nearby always the minimum speed possible (300Mhz).
My configuration is UK froyo 2.2 with pays 3.0 or something and setvsel 1200mhz.
sukiyaki said:
Well I just want to share my experience with this launcher on defy. Still in beta, need to improve alot of things (configuration, more widgets...). But looks promising. I really like it. The big problem -at least for me- is that runs a bit slow. I think the program eats too much memory since my cpu monitor shows nearby always the minimum speed possible (300Mhz).
My configuration is UK froyo 2.2 with pays 3.0 or something and setvsel 1200mhz.
Click to expand...
Click to collapse
Pays-rom eats quite a lot of RAM ya know?
Shell 3D is amazing! Blazing fast!
I used Pays-Rom 5.1 I liked it a lot but I was getting to much freezes and lags.
I switched to LiquidArc and running SPB Shell 3D on it and it's super smooth (41fps)
Also clear you apps cache it may improve speed.
Btw 1200Mhz is too high it can affect performance try around the 1000-1100 Mhz.
WIIstpM said:
Pays-rom eats quite a lot of RAM ya know?
Shell 3D is amazing! Blazing fast!
I used Pays-Rom 5.1 I liked it a lot but I was getting to much freezes and lags.
I switched to LiquidArc and running SPB Shell 3D on it and it's super smooth (41fps)
Also clear you apps cache it may improve speed.
Btw 1200Mhz is too high it can affect performance try around the 1000-1100 Mhz.
Click to expand...
Click to collapse
Yeah i know pays isnt de best of best, but I'm waiting to see what happens in the next months to change my rom (maybe unlocked bootloader or cm7 port comes).
But i don't understand what you say that 1200Mhz can affect perfomance? I set 1200 because I play FPSE.
thanks for your reply.
The CPU needs more than 64vsel to run stable @ 1,2ghz and more than 64 vsel/1,4volt damage and slow down a 40nm² cpu
sukiyaki said:
Yeah i know pays isnt de best of best, but I'm waiting to see what happens in the next months to change my rom (maybe unlocked bootloader or cm7 port comes).
But i don't understand what you say that 1200Mhz can affect perfomance? I set 1200 because I play FPSE.
thanks for your reply.
Click to expand...
Click to collapse
GandalfderWeise said:
The CPU needs more than 64vsel to run stable @ 1,2ghz and more than 64 vsel/1,4volt damage and slow down a 40nm² cpu
Click to expand...
Click to collapse
That's what I mean!! 1200Mhz can, be unstable, heats up your Defy (40-45'C!!) And eats battery like hell.
Sent from my MB525 using XDA Premium App
I am using sbf 3.4.2 155 with 162fix ans spb mobile shell 3D and in ta work very fast.
It takes too many RAM，my device cannot work well
La vera que ami tambien me parecion muy lento, lentisimo!!! es muy atractivo, pero tiene esa gran contra =(
i have tried it, it was laggy as hell.
I tried this on my Defy stock 2.1 (Update 2.59)
Worked well, however I noticed that CPU utilisation was a bit high. I mean in stock form the CPU used to get @ 600MHz frequency during normal browsing but with Shell3D launcher it used to run @ 800Mhx frq most of the time.
I know this is quite natural considering the 3D widgets & all the cool effects, but I uninstalled it so as to save some battery.
cyanogenmod 7 running spd 3d shell is smooth like silk, even with 900mhz only. i believe non overclock CM7 can run this easily.
on 2.2, running spd 3d shell with OC 1Ghz lag like crazy!
so install CM7, buy Quarx a beer, and enjoy spd 3d shell!
lanfearxt said:
cyanogenmod 7 running spd 3d shell is smooth like silk, even with 900mhz only. i believe non overclock CM7 can run this easily.
on 2.2, running spd 3d shell with OC 1Ghz lag like crazy!
so install CM7, buy Quarx a beer, and enjoy spd 3d shell!
Click to expand...
Click to collapse
sure i'll do when gps and fm work, atm i'm testing regina 3d launcher
i got mine for free...and it is working smoothly...1.7 ghz
My moto defy woks it very well, fast and smooth. My CPU **** is the original one 800MHz.
Real smooth on cm7, no lag at all, 800mhz (no OC) and scoring 1700 on quadrant.
one issue with shell 3D is taht it resets the launcher back to stock whenever you press the Home key again... Is there any way to change this..Its really frustrating that you loose all your customized panels & widgets just by clicking the home key?
WTH... is there any way to relaunch the shell3D launcher with your customized settings? Its still installed in your phone, its just that I cant relaunch it.. need help.
Running this on CM7 and it's amazing. When I first installed it, it was laggy as hell but after a quick reboot its running without ANY lag. I'm overclocked to 1.2GHz which I'm sure helps too
I'm using the spb and it works really well, in cyanogenmod 1.5 rc
from here
https://rapidshare.com/files/1985366240/spbshell3d_1.0.1.apk
GandalfderWeise said:
The CPU needs more than 64vsel to run stable @ 1,2ghz and more than 64 vsel/1,4volt damage and slow down a 40nm² cpu
Click to expand...
Click to collapse
Nah, not necessarily. My defy is running 1.2Ghz with 58Vsels, same as 800Mhz stock
Runs like a beast~
Related
Any opinions? I'm on KaosFroyo right now and it is amazing but what do you guys think?
Clearly this is all opinion:
CM6. Fastest I've used (noticeably when I play games) and it's really not missing any features... I think facebook sync is working now, gps, everything really except for the camera.
It's weird I think all the camera apps don't work in Froyo. What about the overclock? All the 2.2 roms are at 710 by default right? Even if you dont have setcpu installed?
At the moment they seem to all use a kernel with 710mhz default. The camera is related to the kernel and once the froyo kernel is out we'll have camera.
Try celebfroyo 1.4
My personnel experience has been, KaosFroyo was awesome, but I had some MINOR issues such as launcher pros 3d app drawer lagging real bad, and game performance being somewhat awful. Am now on Cyanogen6 test build. 0 issues. Other than stock camera. Camera magic fixed that for me.
Whitepaint, I had the same issues with games... Zenonia was literally impossible to play lol maybe 10 FPS tops, with CM6 I'm seeing serious improvements.
thanks guys ill go try Cm6
iloveandroid said:
Try celebfroyo 1.4
Click to expand...
Click to collapse
i have tried that Rom and i didnt like it. it was way too slow and laggy for me
CelebFroyo 1.4 i have it over clocked to 806mhz and stable. Linpack 5.5 and quadrent 420. Been really stable aswell. NIKOLAI2.1 Froyo's kernal is 710mhz and yes you can use SetCPU. Mines only stable up to 806
Sent from my ERIS using XDA App
All of them are excellent works of art ;-)
bluefire808 said:
CelebFroyo 1.4 i have it over clocked to 806mhz and stable. Linpack 5.5 and quadrent 420. Been really stable aswell. NIKOLAI2.1 Froyo's kernal is 710mhz and yes you can use SetCPU. Mines only stable up to 806
Sent from my ERIS using XDA App
Click to expand...
Click to collapse
Haha yeah but my phone will freeze after 768
But hey I'm using CM6 and it's amazing!
itarille said:
All of them are excellent works of art ;-)
Click to expand...
Click to collapse
And yes they are!
Tried them all so far, like them all, but definitely have had the most luck with CELB 1.4. Was rocking Kaos for a bit and was pretty quick, but noticed it was slowing down a bit. Battery life was pretty good. Once I got CELB going though, I was just amazed at how quick everything is. Apps open well, smooth scrolling, and most surprising to me is that there is almost no lag when waking the phone while the profile is set 480/245 and when screen is awake it's 806/480 - both performance. Loving it so far, even though battery life doesn't seem quite as good. Small price to pay for the speed though in my opinion.
es0tericcha0s said:
Tried them all so far, like them all, but definitely have had the most luck with CELB 1.4. Was rocking Kaos for a bit and was pretty quick, but noticed it was slowing down a bit. Battery life was pretty good. Once I got CELB going though, I was just amazed at how quick everything is. Apps open well, smooth scrolling, and most surprising to me is that there is almost no lag when waking the phone while the profile is set 480/245 and when screen is awake it's 806/480 - both performance. Loving it so far, even though battery life doesn't seem quite as good. Small price to pay for the speed though in my opinion.
Click to expand...
Click to collapse
Just curing do you use surface dithering and/or JIT? CM6 had Jit disabled my default for some reason.
Nikolai2.1 said:
Just curing do you use surface dithering and/or JIT? CM6 had Jit disabled my default for some reason.
Click to expand...
Click to collapse
cyangen mod settings under performance ,, just incase u didnt know u can enable it
tazzpatriot said:
cyangen mod settings under performance ,, just incase u didnt know u can enable it
Click to expand...
Click to collapse
Yeah I enabled it, I was just curious if I should have since I've seen that JIT is a little unstable.
I have surface dithering on and JIT on with 24m cache.
edit: And JIT is unstable only with certain apps and with Froyo roms it works a million times better. JIT was made for froyo and not 2.1.
es0tericcha0s said:
Tried them all so far, like them all, but definitely have had the most luck with CELB 1.4. Was rocking Kaos for a bit and was pretty quick, but noticed it was slowing down a bit. Battery life was pretty good. Once I got CELB going though, I was just amazed at how quick everything is. Apps open well, smooth scrolling, and most surprising to me is that there is almost no lag when waking the phone while the profile is set 480/245 and when screen is awake it's 806/480 - both performance. Loving it so far, even though battery life doesn't seem quite as good. Small price to pay for the speed though in my opinion.
Click to expand...
Click to collapse
I may not have understood what you were saying, but are you saying you have your setcpu to scale for performance all the time? If so that's probably why your battery life is suffering as performance forces the CPU to stay clocked at your highest speed. Yours being 806 awake and 480 asleep. Setting it to On demand will allow the CPU to clock down when its not in use.
Yes, performance means 100% of the time it is clocked as high as possible, put it on demand. Our kernels don't support anything else like "conservative."
Are the Froyo MODs using Sense? I really don't like the idea of giving it up. Everything is too boring without it (just my opinion, don't kill me for it!).
I just put tazz 14 on and set my Max at 768... is that too much... I have read so much on what clock speeds to set but I still don't know what's best.. also... what is Eris stock clocks?
Notxok said:
I just put tazz 14 on and set my Max at 768... is that too much... I have read so much on what clock speeds to set but I still don't know what's best.. also... what is Eris stock clocks?
Click to expand...
Click to collapse
If your phone is running ok and getting too hot then 768 should be fine, many of us run 806 without a problem. I think stock CPU is set at 528 (maybe lower, I don't remember)
BTW this should probably be in Q&A board
Sent from my nonsensikal froyo
I run 768 with no problems.
SikYou said:
If your phone is running ok and getting too hot then 768 should be fine, many of us run 806 without a problem. I think stock CPU is set at 528 (maybe lower, I don't remember)
BTW this should probably be in Q&A board
Sent from my nonsensikal froyo
Click to expand...
Click to collapse
806 are you ****ting me?... is it set to performance?
Notxok said:
806 are you ****ting me?... is it set to performance?
Click to expand...
Click to collapse
Interactive
Sent from my nonsensikal froyo
Hmmm. I'm trying 806 now.
SikYou said:
Interactive
Sent from my nonsensikal froyo
Click to expand...
Click to collapse
806 in interactive rebooted for me.. I might have to reflash a ROM now LOL... lucky I wish I could run 806 efficiently
You should never try clock speeds without disabling "Start on boot" or you can really screw yourself over....
Anyway, 768 is a very common speed for people to be able to hit. I personally become unstable at 806 (especially with JIT on) and I stick to 787.
Hungry Man said:
You should never try clock speeds without disabling "Start on boot" or you can really screw yourself over....
Anyway, 768 is a very common speed for people to be able to hit. I personally become unstable at 806 (especially with JIT on) and I stick to 787.
Click to expand...
Click to collapse
Your 486 Makes me Envious.. Would you mind PMing m your set-up ( ROM Set CPU info and current task killer? )
My 486 was a while ago and doesn't really reflect the overall performance of my phone; as in my phone is currently faster but I get lower quadrant scores (440-450)
I was on Tazz V6 I believe, clocked to 768mhz performance, with BFS V2 or V3. After rebooting and flashing the kernel I was getting high 470's and mid 480's so I took a picture with my girlfriend's Incredible.
JIT was at 16m and I'd just switched from 24 to 16 and wiped dalvik. This is significant because anytime you switch your dalvik heapsize and reboot your quadrant scores will be at their highest, not sure why, probably has to do with RAM allocation.
Hungry Man said:
My 486 was a while ago and doesn't really reflect the overall performance of my phone; as in my phone is currently faster but I get lower quadrant scores (440-450)
I was on Tazz V6 I believe, clocked to 768mhz performance, with BFS V2 or V3. After rebooting and flashing the kernel I was getting high 470's and mid 480's so I took a picture with my girlfriend's Incredible.
JIT was at 16m and I'd just switched from 24 to 16 and wiped dalvik. This is significant because anytime you switch your dalvik heapsize and reboot your quadrant scores will be at their highest, not sure why, probably has to do with RAM allocation.
Click to expand...
Click to collapse
I don't get above a 415-420 really.. any suggestions or help?
Notxok said:
806 in interactive rebooted for me.. I might have to reflash a ROM now LOL... lucky I wish I could run 806 efficiently
Click to expand...
Click to collapse
806 seems to be running a fraction faster but to me it is hardly noticeable coming from 768.
Notxok said:
I don't get above a 415-420 really.. any suggestions or help?
Click to expand...
Click to collapse
Don't read too much in the benchmarks . I usually run happily around 430.
I use SetCPU (interactive 768 / 245)
I don't run any task killers, in my experience they are more trouble than they are worth.
The other thing IMHO if you don't use an app, get rid of it.
Task killers are in fact more trouble than they're worth, especially automatic ones. I use advanced task killer and I only ever kill tasks right after my phone has started up/ when my phone is plugged in. Task killers hurt battery life and performance.
Hungry Man said:
Task killers are in fact more trouble than they're worth, especially automatic ones. I use advanced task killer and I only ever kill tasks right after my phone has started up/ when my phone is plugged in. Task killers hurt battery life and performance.
Click to expand...
Click to collapse
Thanks Guys... Ill keep that in mind.. I was using auto memory killer
Notxok said:
I just put tazz 14 on and set my Max at 768... is that too much... I have read so much on what clock speeds to set but I still don't know what's best.. also... what is Eris stock clocks?
Click to expand...
Click to collapse
In my personal experience, I would disable set on boot in SetCPU and start gradually bumping the speed up. Usually at 787 my phone runs best (fastest and most stable). Then, I'd go back and bump it to 806. It WOULD run but after about 5 minutes of playing with my phone it typically causes it to lock. 825 Causes an immediate lock. So I typically leave it at 787 and all Froyo roms seem to run fine at that for me. I don't even test anymore...just restore SetCPU app and data with Titanium on initial boot of a new rom. So far, no problems.
Sent from my ERIS using XDA App
What's the best setting? Ondemand? Interactive? Prefermance..etc
Sent from my VANILLA TAZZ using XDA App
806 no problem using the Collins script.
Anything higher than 710 on my phone locks it up.
Hi guys, can someone tell me how to get my P500 perform fastest it can? What ROM is fastest, and i don't care about battery, just want it to be the fastest it can! And also what aditional tweeks and programs/kernels to instal to make it faster?
In this moment i am using mic_os 6.5.7 android 2.3.5 CPU 825/245 Mhz Performance, with only settings, LG keyboard and setCPU running apps using 83MB of RAM alltogether, highest score i got is 1317 points, and about 1250 average.
Is this the fastest this phone can go...? :/ I have seen some posts where some guys got it too like 1500! That is my magic target number! Soo, any help..?
Echelonex said:
Hi guys, can someone tell me how to get my P500 perform fastest it can? What ROM is fastest, and i don't care about battery, just want it to be the fastest it can! And also what aditional tweeks and programs/kernels to instal to make it faster?
In this moment i am using mic_os 6.5.7 android 2.3.5 CPU 825/245 Mhz Performance, with only settings, LG keyboard and setCPU running apps using 83MB of RAM alltogether, highest score i got is 1317 points, and about 1250 average.
Is this the fastest this phone can go...? :/ I have seen some posts where some guys got it too like 1500! That is my magic target number! Soo, any help..?
Click to expand...
Click to collapse
Oxygen rom + franko's v4 kernel.
Try using chainfire 3d from market
Sent from my LG-P500 using Tapatalk
Echelonex said:
Hi guys, can someone tell me how to get my P500 perform fastest it can? What ROM is fastest, and i don't care about battery, just want it to be the fastest it can! And also what aditional tweeks and programs/kernels to instal to make it faster?
In this moment i am using mic_os 6.5.7 android 2.3.5 CPU 825/245 Mhz Performance, with only settings, LG keyboard and setCPU running apps using 83MB of RAM alltogether, highest score i got is 1317 points, and about 1250 average.
Is this the fastest this phone can go...? :/ I have seen some posts where some guys got it too like 1500! That is my magic target number! Soo, any help..?
Click to expand...
Click to collapse
use oxygen 2.3.2 and this tweaks below
see this threads...
http://forum.xda-developers.com/showthread.php?t=1530411
Echelonex said:
Hi guys, can someone tell me how to get my P500 perform fastest it can? What ROM is fastest, and i don't care about battery, just want it to be the fastest it can! And also what aditional tweeks and programs/kernels to instal to make it faster?
In this moment i am using mic_os 6.5.7 android 2.3.5 CPU 825/245 Mhz Performance, with only settings, LG keyboard and setCPU running apps using 83MB of RAM alltogether, highest score i got is 1317 points, and about 1250 average.
Is this the fastest this phone can go...? :/ I have seen some posts where some guys got it too like 1500! That is my magic target number! Soo, any help..?
Click to expand...
Click to collapse
I'm getting 1800 score in quadrant
NightlyFourE + Franco.K #4 + Ungaze data2sd
Try popdog123 oxygen 2.6 with Franco #4. 825/480 performance/sio.
Add ungaze data2sd with 1gb ext4 and p500 will not run fast. It will FLY SLOW.
Sent from my LG-P500 using XDA
try this : see my signature there the neocore result, and the rom name too
Use cyanogenmod nightly @ 787MHz + PERFORMANCE Governer
Thx guys for replies, i will test these combinations one by one and post results here...
Also will test new ICS beta4.
This is what i came up with till now, will update it soon! If you have any more suggestions, please tell me...
I also tried to play HVGA (with sound) version of GTA 3 on all ROMS exept ICS and i must say that the Perfectpeso2.2 was frikin fastest, still lags pretty much on GTA 3 but playable. too bad in this one is clock cap at 806 mhz...:/
And i am pretty dissapointed in ICS results, cuz it is soo nice looking and fresh but damn slow...:/
i didn't use Ungaze cuz it just makes files between phone and SD card move more faster, right? Soo i don't think it will improve gaming speed...
i will put an ICS to my phone to test it for few days and see if it is nice, but after that, i am definately going on Perfectpeso! At least ps1, and Mame 32 games will run smooth now!
And if anyone knows a way to play full HVGA version of GTA3 on P500 please reply! But i think that ripped version will now run smooth! (the one with lower graphics and no sound)
Results: I choose the best results i got from these tests...and exept ICS there is a little difference in power between these ROM's as you can see in benchmarks:
1.NightlyFourE + Franco.K #4
825Mhz
a few runs
Quadrant standard - around 1300
3 runs
Neocore - 62
2. Perfectpeso2.2
806Mhz
3 runs
Quadrant Standard - 1336
3 runs
Neocore 806Mhz - 70.8
3.CM 9 Ics Beta 4
806Mhz
3 runs
Quadrant Standard - 946
4.oxygen 2.3.2
806Mhz
3 runs
quadrant standard - 1307
3 runs
neocore - 63.1
Hey guys, as you know, Titanium-Backup Pro can freeze apps, thus stopping them from running in the background.
So far I've frozen...
AllShare 1.2.1
Days 1.0
[VOICEMAIL] Dialer 2.3.5
[SMS/MMS/APN..er storage 2.3.5
FotaClient 1.0
Maps 6.5.1
Mini Diary 1.0
Mobile print 1.2
Phone 1.0
PhoneUtil 1.0.0
Print via Bluetooth 1.0
RDP Bridge 1.0
Samsung Apps 2.6.036
Samsung S... View 2.4.2
SimDetachNotifier 1.0.0
Social Hub 1.00.10102
Software update 2.0.0
Sound Player 1.0
Street View 1.7.2.0
Talk 1.3
TalkBack 2.6.0
TwLauncher 2.3.5
TwWallpaperChooser 1.0
VPN Services 2.3.5
Market Feedback Agent 2.3.7
____________________________________________________
The most memory I could get free was 203MB with nothing running except...
Settings @ 10mb
GO Launcher EX @ 19MB
Task manager @ 7.4MB
SNS @ 0.00B
GO Keyboard @ 11MB
____________________________________________________
I get around 203MB of free RAM this way... Which works great for games like Modern Combat 3 or other RAM heavy games/apps.
Does anyone know if one of the things I froze is bad to freeze? Or of any other items we could freeze to get the most optimal amount of RAM possible for this device? I'm curious to see if we can see a stable 210MB+ of RAM (with nothing running).
What results do you guys get?
Go to running and stop the go launcher I always stop it and it frees a bit
Sent from my GT-I9000 using XDA
I wonder how stable it is your device after you freeze all those components in every day use.
And another question, I see you have it overclocked to 1.5 Ghz, again, how stable it is?. And, what voltage modifications and governor do you use for that kind of overclock?
Thank you, it is good to see a topic related to maximize resources in this gem.
I have RAM Manager and it works pretty well if you also have a task manager.
SirRhor said:
I wonder how stable it is your device after you freeze all those components in every day use.
And another question, I see you have it overclocked to 1.5 Ghz, again, how stable it is?. And, what voltage modifications and governor do you use for that kind of overclock?
Thank you, it is good to see a topic related to maximize resources in this gem.
Click to expand...
Click to collapse
It seems pretty stable. I haven't come across any issues thus far. The roughly 200mb of free RAM makes playing Shadowgun so smooth with 4xMSAA enabled. Clocking it to 1.5GHz prior also smooths the fps out a good bit too.
Shadowgun (without 4xMSAA and 1.5GHz) = Very high, probably 50-60fps
Shadowgun (with 4xMSAA and 1GHz) = Significantly lower fps, probably around 20fps
Shadowgun (with 4xMSAA, 200mb of RAM free prior, 1.5GHz) = Pretty good fps, probably around 30-40fps or so.
Oh and my 1.5GHz clocked profile is...
ondemand, 100~1500MHz
L0 1500MHz - 1350mV - 1150mV
L1 0800MHz - 1200mV - 1100mV
L2 0400MHz - 1050mV - 1100mV
L3 0200MHz - 0950mV - 1100mV
L4 0100MHz - 0950mV - 1000mV
I've had no stability issues with this profile so far. I usually only use it for intense gaming like Shadowgun (since it uses a ton of special effects/resources) in order to obtain a smooth framerate. I also use it for Modern Combat 3 and Order & Chaos. On a non-gaming note; It seems to make the OS run MUCH faster, GOLauncher seems very speedy as well + fluid transitions.
I've had it at 1.5GHz all day and while battery did drop a bit, it was very speedy and usable during the time I used it (occasionally over a work day).
I've probably had this profile for about a month or so now, and nothing has crashed or frozen due to it.
This might work
Personally I just rooted my SGP player 5.0 and downloaded a custom rom. The custom rom I had had an auto task killer or whatever it was called, which automatically freed up memory. This helps so much because in the stock rom I had to always go to the task maager.
Here's a link:http://forum.xda-developers.com/forumdisplay.php?f=1423
Thank you for the response, I'm gonna try your profile to see if how it works for me. And if I burned it, I'll send you the receipt...
SirRhor said:
Thank you for the response, I'm gonna try your profile to see if how it works for me. And if I burned it, I'll send you the receipt...
Click to expand...
Click to collapse
Lol you won't burn it at 1.5Ghz, but at 2GHZ.... that's another story. Lets just say I was showing off how the slider went to 2GHz and hit apply on accident. The screen instantly dissolved, in the way an old Gameboy Color would when you turned it off (image burn?). Luckily it reboot shortly afterwards and seemed fine. That was about 2 months ago. So uh... yeah. 1.5 is stable, 1.6 worked, but I haven't tested it enough yet.
I'm testing 1.4 for now using your voltage values from 1.5
I'll keep it like that for a few days and then i will ramp it up to 1.5
Also, this is REALLY weird, maybe I'm just crazy and/or ignorant, but every time I install a new ROM, the last thing I do is change the DPI value from 240 to 200, and when I reboot the device, everything becomes faster, noticeable faster and smoother, have anyone else noticed that?
Sent from my YP-G70
anybody know what voltage and stuff to put to over clock to 1.2
Sent from my GT-I9000 using XDA
Or what's the best thing to overclock from 1.0
Sent from my GT-I9000 using XDA
I use tegra overclock on stock settings 1.3 ghz profile scalingondemand and powesave profile when screen is off ..i did not see any change in batery life vs 1ghz and everything is 40% faster.
DZonikg said:
I use tegra overclock on stock settings 1.3 ghz profile scalingondemand and powesave profile when screen is off ..i did not see any change in batery life vs 1ghz and everything is 40% faster.
Click to expand...
Click to collapse
Does it heat up whith heavy gaming?
Sent from my GT-I9000 using XDA
I haven't seen any report about that in our devices.
j21098 said:
Does it heat up whith heavy gaming?
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
No..i played this morning minecraft pe for 4 hours and it did not heat at all.
No..i played this morning minecraft pe for 4 hours and it did not heat at all.
j21098 said:
Or what's the best thing to overclock from 1.0
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
I'll go ahead and confirm that you can clock from 1.1-1.3GHz without changing anything other than the clock speed. 1.4Ghz+ is where I'd apply the 1.5Ghz profile I use currently.
And no, it doesn't head up much during intense gaming; At least not for me.
what should I put in voltage and all that in 1.2 Ghz and in the set CPU
Sent from my GT-I9000 using XDA
j21098 said:
what should I put in voltage and all that in 1.2 Ghz and in the set CPU
Sent from my GT-I9000 using XDA
Click to expand...
Click to collapse
For 1.2Ghz, just use the stock values. No need to adjust them until 1.4Ghz+
ZaIINN said:
For 1.2Ghz, just use the stock values. No need to adjust them until 1.4Ghz+
Click to expand...
Click to collapse
And now you tell me.... That would explain my battery drain.
Sent from my YP-G70
I have noticed that whenever i play heavy 3d games, my cpu only runs at 800 mhz..even though the scaling is from 200-1200 mhz. First i thought it was a problem with a specific game(The dark knight rises), but now i tried Mass effect infiltrator too..same thing happens..
I wouldnt have bothered too much but i get some fps drops..i expect 'smooth as a butter' experience from S2..which i aint getting..while playing 3d games..
Some one might argue that maybe the game requires only 800 mhz to run..but i seriously doubt it..in 3d applications(heavy) , the processor should be used at higher frequencies. Also, i tried scaling my cpu from 1000-1200 mhz, but still while playing games, the cpu goes back to 800 mhz lol..
Please someone explain this and also Try it on your device..do u notice the same results while playing a heavy 3d game?
I tried running stock kernel as well as siyah 3.3.2. getting same results on both.. tried different governers too..but same thing
I am on neatlite rom currently..could it be the rom thats the culprit?
Please someone do help me, i am getting frustrated with my S2 lol..
thanks
aviral1990 said:
I have noticed that whenever i play heavy 3d games, my cpu only runs at 800 mhz..even though the scaling is from 200-1200 mhz. First i thought it was a problem with a specific game(The dark knight rises), but now i tried Mass effect infiltrator too..same thing happens..
I wouldnt have bothered too much but i get some fps drops..i expect 'smooth as a butter' experience from S2..which i aint getting..while playing 3d games..
Some one might argue that maybe the game requires only 800 mhz to run..but i seriously doubt it..in 3d applications(heavy) , the processor should be used at higher frequencies. Also, i tried scaling my cpu from 1000-1200 mhz, but still while playing games, the cpu goes back to 800 mhz lol..
Please someone explain this and also Try it on your device..do u notice the same results while playing a heavy 3d game?
I tried running stock kernel as well as siyah 3.3.2. getting same results on both.. tried different governers too..but same thing
I am on neatlite rom currently..could it be the rom thats the culprit?
Please someone do help me, i am getting frustrated with my S2 lol..
thanks
Click to expand...
Click to collapse
for ur 'Smooth as Butter' experience with 3d gaming, i would suggest u to flash a stock official ICS firmware and then see for the same
It would be really great if anyone could just verify it on their device too? Just run some good heavy 3d game..and look at the cpu usage..would be a lot appreciated
thanks again
COmeon anyone?? Please reply and let me know how is the game and cpu behaviour in your devices..am really worried coz of this issue...
Why don't you use apps like setcpu and clock your processor at 1200mhz max and say 1000mhz min?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
UltimateAnas said:
Why don't you use apps like setcpu and clock your processor at 1200mhz max and say 1000mhz min?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
Click to expand...
Click to collapse
If you noticed my post properly...i did try scaling from 1000-1200..but still the processor goes down to 800 mhz...
It only happens with heavy 3d games( which ironically require the processor the most)
2d games run at 1200 mhz but not the 3d ones lol..:|
Sorry! Try using chainfire's 3D app for the S2, install the drivers and see what happens then?
Sent from my GT-I9100 using XDA Premium
If I helped you press thanks!
It could be due to smooth scaling setting bug from earlier siyah kernel, or throttling due to cpu temperature.
Try flash the latest siyah kernel and set smooth scaling level to 1200mhz.
i have set smooth scaling to 1200 mhz.. and yeh i guess it could be the throtling issue but why is it happening?
I mean i can run a 2d game like mutant roadkill on 1200mhz but when i try to run heavy 3d games..they just run at 800 mhz..
I did read bout this throttling issue to 800mhz but what can i do to avoid it? The phone doesnt get too hot either though..
Hi I'm running at 1600mhz on my galaxy note (stock is 1400) everything is running damn fast thumbs up.... But every single time I load a game which contains heavy 3d graphics then it goes down to 800mhz I just can't find a solution. Anyway running smoothly at 1600 just as long I don't play games.
Sent from my GT-N7000 using xda premium
dkc1976 said:
Hi I'm running at 1600mhz on my galaxy note (stock is 1400) everything is running damn fast thumbs up.... But every single time I load a game which contains heavy 3d graphics then it goes down to 800mhz I just can't find a solution. Anyway running smoothly at 1600 just as long I don't play games.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
wrong thread and wrong forum my friend this is for s2
also, perhaps you should use setCPU to check some clock settings
I just tried infiltrator, and my device uses highest 1200mhz normally, so i guess it must be kernel/rom related. I'm running rr 2.6.1 with latest dorimanx 5.67 kernel. It might be something about neat rom that prevents your device from using max clock, since neat rom is very battery friendly, but i'm not sure... would be nice if someone using the same rom as you could try and confirm.