Related
Hey i installed this rom....
i did like this
i downloaded basebox or w/e from market i rooted my phone i installed xrecovery and i installed this rom but i have no signal on wi-fi eaither mobile network i keeps sayin no server i tryed everything and nothing works .... can someone help me out please?
i tried System Crash from Dev App and i tried to remove SD card and then facotry nothing works :/
first time same happend to me. Try to reflash it (worked for me). Now everything is OK
see the ABOUT THE PHONE, is the baseband showed?
if not, try reinstall the baseband
Reflash latest SE firmware, check you on bb54 as this definately works on this rom. Root, install xrecovery, boot into recovery then factory reset wipe cache dalvick cache and then reflash the zip. Should work fine, does for me. Good rom, very stable and quadrant of 1550, yay!!
Sent from my X10i using XDA App
theshop said:
first time same happend to me. Try to reflash it (worked for me). Now everything is OK
Click to expand...
Click to collapse
This is pretty normal, reapply the baseband, it should work, if it doesn't install the rom again, this was what i had to do, don't know why, ow, now i remember, the baseband i download from the post i couldn't make work, then i download the baseband from the post http://forum.xda-developers.com/showthread.php?t=960527 and applied the fiz right next reflashing the rom, but remember that the fix must be applied RIGHT AFTER THE ROM FLASHING you can't reboot.
installation CM 6.1.3 V006
i can't not install CM 6.1.3 V006
I used to run this Rom on V54 it was good, now i use stock Rom 2.1, Rooted, Jit2, BB 55
PS: i had follow the installation it said
E: can't chown/mod/system/bin/su
(No such file or directory)
E: Failure at line 7:
set_perm 0 0 04755 SYSTEM:bin/su
Installation aborted
Thank You all.
Similiar thing happened to me. I did as instructed, flashed it, then crash system and a day it worked and when i turned it off it never worked again. I just used SEUS to put it back to normal....
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B.0.1 with BB 67)
- root and XrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Have you tried other 2.2 ROMs such as ____MIUI and 2.3 ROMS?
I tried this rom once and it works: MIUI_xperia_TripNRaVeR-v1.0.9.zip
Never tried 2.3 roms because no camera driver (i thought)
And i liked wolfbreaks rom!
Anything i could try?
Sent from my SEX10 using XDA App
I have tried some other rom and they keep rebooting or no signal before too, even though I am in the right BB. I guess for some rom it's just not meant to be used for the country you are at (because of service provided, etc)?
Hmm strange, Because Wolfbreak v006 works good.
I live in the Netherlands, can someone confirm working TW V008 rom or Achotjan rom in the Netherlands??
sam20100 said:
Hello Everyone,
I have a problem and i cant find it out, so i hope u can help me!
When i flash TW007 every time when it is booted it restart itself over and over again. After 15-20 sec it restart, i can input my pin and some times get signal
I did the following install
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecovery via flashtool
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
I tried different basebands .54 .58 .67
I have this problem with the rom of wolfbreak (V007 and V008) and Achotjan_v05
When i flash Wolfbreak V006 or XShinyBread it works, and no restarts!!
Before i was on Wolfbreak V006 BB.58
All stock Kernel!
X10i
What am i doing wrong??????
Pls Help, i want to have V008 stock Kernel!!!
thx
Click to expand...
Click to collapse
Wolf break will restart a few times when you first install it.
It does this to get signal and stabilize the BB.
Make sure your SIM is inserted.
Mine does this 8 to 12 times then it will become stable.
Yesterday, i left my phone alone for 20 min. So i think 15-20 reboots. But it not become stable...
Sent from my SEX10 using XDA App
You have to make sure you flash in the correct pattern with the correct rom.
Also if "Factory Reset/Wipe Cache Partition" then you don't need to format the cache again and wipe the dalvik partition.
I did this, is this the right way?
- install via SEUS (firmware 2.1.B with BB 67)
- root and xrecoveryV0.3 via flashtool 2.9.1
- install rom via xrecovery (Factory Reset/Wipe Cache Partition/Format Cache/Wipe Dalvik Cache)
- install custom zip TW V008
Then it keeps rebooting.
Now trying above.
(but no scard with in the phone while installing via SEUS)
and shall try more reboots 30 mins)
is it a idea to format SD-card?
I had the same problem.
Flashed custom kernell addon and the restarts stoped.
Thx All..
It works now,
For me the tric was to DISABLE SIM PIN!
Some how, when you disable the pin, the phone have more time to get signal and become stable before is restarts itself
(i also did get after entering the pin, Simnetwork lock popup)
I did fresh install Seus/Flashtool/Xrec. and boots 2 times to become stable!
I was trying since TW V008 came out so i'm happy now!
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
Try Oodies MUIU Prime X its very stable
pcsel said:
Ok guys n gals
I have an Xperia X10 which is locked to the Three network. I have rooted it and also installed xrecovery using the latest flashtool.
I have installed the link here http://forum.xda-developers.com/showthread.php?t=1353584 to enable me to run MIUI ROMS.
Basically it is for locked boot loaders and installs:
CWM5 and LockedBL.zip.
I have downloaded Xperia_MIUI_Engineering V02 via CWM5 doing a factory reset and clearing all user data and Dalvik cache beforehand..
Now.. ROM work fine great on everything except..... ha ha making a phone call!!
I have signal everything etc but when I go into an existing contact I get an Android crash..
"The process android.process.acore has stopped unexpectedly. Please try again"
The options are then Force Close or Report to MIUI which I have done both.
Any ideas anyone?
Click to expand...
Click to collapse
well, is usual that you have some bugs using roms with the locked bootloader, try different rom or FIX PERMISSIONS via Root explorer.
Im using MIUI Oodie Prime and i have to say that is beautiful, try that one, it is more stable than Engineering
I tried the Oodie Prime..after a factory wipe, cache etc.. Now after installation I get the 'Sony Ericsson' startup, the (CWM5 Recovery) XDA Developers has disappeared so I can no longer boot back into CWM5 Recovery and I now have it stuck on the Oodie Startup screen and no further. I have to remove battery to reset and then rebuild with generic Android 2.3.3 etc.. and re root and xrecovery..
Try a different kernel, I had the same issue, you can use either oodies fxp kernel or doomlord v06 kernel. I've tried both and prefer the doomlord one.
Sent from my X10i using XDA App
Okay I fixed it for all of the ROMS that I was trying Doh.. I was installing the LockedBL.zip before the ROM..didn't read the instructions thoroughly..Works perfect now with a full wipe and ROM install and LockedBL.zip AFTER the ROM install
Will close the thread now.. Thanks for all your help.
Paul
SO I retartedly tried to restore from a nandroid after changing AOKP versions, and now even though I have wiped everything and done droidstyle's guide again, I install my THS Build 2 ICS ROM, and after I installed it, my phone just keeps booting into recovery, when I click "reboot system now" it just reboots into recovery. Any suggestions?
-------------------------------------------------------------------------------------------
Edit: After trying a couple other things, I decided to install AOKP Milestone 6, and then GApps, and voila, it booted :?
You should try THS build 1.
Hello, I'm having a bit of an issue here I can't install a ROM after trying CM10.1.
I was using CM10, up until awhile, when I deiced to give CM 10.1 a try (Alpha build I'm aware of the risks).
I have installed CM10.1 using Rom Manager Premium. The installation progress went smooth without any errors, before installing I've made a backup of my current ROM.
Once CM10.1 finished optimizing application it started giving errors, that it can't load up Setup Wizard stopped from working, I have rebooted into CMW, wiped Dalvik cache and user data, I have booted up again, and was still was getting the same error, so I decided to restore my previous ROM.
But when I have booted up into CWM, I have discovered that the backup I made isn't there, not on the Internal memory and not on the SD card.
The issue I'm having is that I can't instal CM10 back, when ever I try to install CM10 ROM ZIP using CMW from external SD I get an error (Status 7)
Is there any ODIN CM10 installation route?
Thank you!
Update 1:
I have manged to flash The Official Rom, But it can't boot up, it seems like it's stock on the animation screen, the animation moves, but doesn't boot up. What might be the issue?
Update 2:
Solved the problem by wiping use data, and resting it to factory settings.
Update 3:
Got it fixed, everything is running like it used to be. Shame that I lost all my personal DATA, specially the DICM folder :/