Related
I can't turn on my X10.When i press the on button,it's only vibrate a bit then nothing happen.No light is on even when i plug in.More over,when i plug in the press the on button,it won't even vibrate like without cable.
Please help me
Have you tried to re-flash it with the 2.1 or 1.6 FW with Bin4ry's flasher?
Which device do you have? A generic one or developer phone?
i'm having the generic one and i just update it to 2.1 this monday.
It won't seem to have any power goes in when i plug in.How i'm going to reflash it anyway? please help me
shinnie88 said:
How i'm going to reflash it anyway? please help me
Click to expand...
Click to collapse
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
shinnie88 said:
Thank you so much.My fone turned on again.By the way,should i change back to global generic or just leave it as nordic?
Click to expand...
Click to collapse
Nice 1. It's totally up to you, I've stuck with the Nordic for now.
My phone went off again.This times also can't turn on or charge.But when i hit the on button,itz flash red 3x then went off.Anyone know what happen? please help me
X10 only vibrate
Same problem here X10 only vibrates,
i tried flashing bin4ry way it stops at around 75%
Tried even in sonyericsson update service but still no luck
It also stops around 25%, my phone is generic & my battery
Is fully charged any ideas?
Pls help
I have the same problem if I flash a firmware using FlashTool. I am stuck at 1.6 and I can't install any other firmware because I can't turn it on. Only firmware that works is the one from ROOT_F3V3 but it is a 1.6 firmware
If you find a firmware that works please post it.
Try downloading the latest Flashtool and then flash the latest firmware available; http://forum.xda-developers.com/showthread.php?t=936733
Its happened before. The phone will not boot, I waited several hours and ... it was working again, but I do not know why
Try to connect into flash mode and install SE original ?
Ok, i had to do this twice now, as i bricked it a couple of weeks ago
you'll have to reflash with sony ericsson update service here:
http://www.sonyericsson.com/cws/sup.../detailed/updateservice/xperiax10?cc=gb&lc=en
Follow the instructions and press the back button before plugging in the cable.
Download the software and keep in mind that playing around with roms will result in these problems so don't go too far.
1. Take your battery out.
2. Hold the back button. Make SEUS running and ready.
3. Plug it into the computer.
4. Put your bateery back in.
Follow the instructions. Hopefully it would work and good luck
If it worked dont forget to hit thanks button.
Sent from my X10i using XDA Premium App
ty so much JingleJo, your method worked for me
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Man plzz help me i'm a noob in this things i have the same problem with that guy but i dont know how to reflash my phone :S where can i take the 2.1 :S i dont know nothing :S:S
---------- Post added at 10:26 AM ---------- Previous post was at 10:20 AM ----------
XperienceD said:
Did you use a 2.1 from this site? If so, take out your battery for 10 seconds, then put it back in just before you attempt to reflash.
Click to expand...
Click to collapse
Plzz help me i have the same problem :S but i dont know how to reflash my x10 :S i dont know where can i take the 2.1 plzz can u tell me with a video or with steep :$ like baby plzz
My xperia arc went dead after trying to upload OTA update, yeah i know i shouldn't have but i guess it too late now. however i will like any help as to how to revive my phone. the charging light even don't turn up.
Pls anyone, I'm desperate
PS:the phone was unlocked
download the generic 2.1 firmware and save as in flashtool/firmwares.
Put yout phone in flashmode and flash back to 2.1....
Sent from my SO-01C using xda premium
Pc companion to 2.3 then do ur thing..like modding and stuff
Sent from my SO-01C using xda premium
I installation xRecovery, but it does not work, boot while holding back would have been stopped at the Sony Ericsson screen, I think my installation steps are not wrong, because I have two Xperia X10, an old date is 10W28 can enter xrecovery, the new date is 10W48, can not enter xrecovery has been stopped at the Sony Ericsson screen. What is the problem? The new machine not support recovery？who can help me? Looking forward to your reply! Thank you.
PS: I am Chinese, and this post is translated by Google, I hope you can understand.
kenrry_tam said:
I installation xRecovery, but it does not work, boot while holding back would have been stopped at the Sony Ericsson screen, I think my installation steps are not wrong, because I have two Xperia X10, an old date is 10W28 can enter xrecovery, the new date is 10W48, can not enter xrecovery has been stopped at the Sony Ericsson screen. What is the problem? The new machine not support recovery？who can help me? Looking forward to your reply! Thank you.
PS: I am Chinese, and this post is translated by Google, I hope you can understand.
Click to expand...
Click to collapse
Same here. Try the 0.0.1-beta. It worked for me. The older version worked but not the new 0.2 version. However, with 0.0.1-beta, only the first time after the installation works, the following reboots don't work. In order for it to work again, I have to reinstall again. Anyone knows why?
kenrry_tam said:
I installation xRecovery, but it does not work, boot while holding back would have been stopped at the Sony Ericsson screen, I think my installation steps are not wrong, because I have two Xperia X10, an old date is 10W28 can enter xrecovery, the new date is 10W48, can not enter xrecovery has been stopped at the Sony Ericsson screen. What is the problem? The new machine not support recovery？who can help me? Looking forward to your reply! Thank you.
PS: I am Chinese, and this post is translated by Google, I hope you can understand.
Click to expand...
Click to collapse
happened to me yesterday when i wanted to install a new ROM through recovery. every time i try to go to recovery, it didn't worked, though i had checked a night before that it was working fine. only thing i could think of was to recharge the battery, it was 52%, i charged it full and tried again and it worked.
i dunno if this is the solution, but it could be a solution
You don't hold back button you have to keep pressing it till it appears, does it install correctly?
sent from my Commodore 64
chiefy009 is right
chiefy009 said:
You don't hold back button you have to keep pressing it till it appears, does it install correctly?
sent from my Commodore 64
Click to expand...
Click to collapse
I repeatedly clicked it, not hold, yet I got frozen at the sony ericsson page. It was working the first time, when I first installed it. Then, after rebooting, it got frozen.
shinnsan said:
I repeatedly clicked it, not hold, yet I got frozen at the sony ericsson page. It was working the first time, when I first installed it. Then, after rebooting, it got frozen.
Click to expand...
Click to collapse
never had that problem myself. but try to install 0.2 xrecovery again, it should take 7-10 taps of the back button. if that doesnt work. reflash to a 2.1 firmware, install busy box, z4 root or one click root, xrecovery. power off try again
SErooted said:
never had that problem myself. but try to install 0.2 xrecovery again, it should take 7-10 taps of the back button. if that doesnt work. reflash to a 2.1 firmware, install busy box, z4 root or one click root, xrecovery. power off try again
Click to expand...
Click to collapse
Thanks for the help. Tried them all. I've tried spam press, fast press, slow press, 0.2 just doesn't work. It hangs. When I don't press it, it reboots normally.
0.0.1-beta works, but just for the first time after installing. Freezes the next reboot. To make it work again, I need to install again. That's as far as I found out on how to make it work
shinnsan said:
Same here. Try the 0.0.1-beta. It worked for me. The older version worked but not the new 0.2 version. However, with 0.0.1-beta, only the first time after the installation works, the following reboots don't work. In order for it to work again, I have to reinstall again. Anyone knows why?
Click to expand...
Click to collapse
thanks, but where can i find 0.0.1-beta？can send me? or give the link
[email protected]
kenrry_tam said:
thanks, but where can i find 0.0.1-beta？can send me? or give the link
[email protected]
Click to expand...
Click to collapse
Try this: http://forum.xda-developers.com/showthread.php?t=895351
chiefy009 said:
You don't hold back button you have to keep pressing it till it appears, does it install correctly?
sent from my Commodore 64
Click to expand...
Click to collapse
thanks for help! but Either hold or keep pressing still frozen at the sony ericsson page I think install is correctly ， because same way for other Xperia X10，can works ，i thinks New machine is not supported recovery
Had the Same Problem and solved it by reinstalling busybox... maybe its the same for you guys...
Sent from my X10i using XDA App
Please check the xRecovery requirements, particulary the fragment in huge bold text.
http://forum.xda-developers.com/showpost.php?p=9561575&postcount=1
9/10 xRecovery problems are solved by reading the first post. Installing old versions will cause nothing but trouble...
Cheers,
z
zdzihu said:
Please check the xRecovery requirements, particulary the fragment in huge bold text.
http://forum.xda-developers.com/showpost.php?p=9561575&postcount=1
9/10 xRecovery problems are solved by reading the first post. Installing old versions will cause nothing but trouble...
Cheers,
z
Click to expand...
Click to collapse
I've installed busybox from the market as per required. But still it freezes on 0.2. I've tried a dozen times.
Don't mean to sound ungrateful, it's a really useful app. Thank you z for coming up with it.
shinnsan said:
Try this: http://forum.xda-developers.com/showthread.php?t=895351
Click to expand...
Click to collapse
thanks for help ，i try it
here is the situation
the x10 is dead, when trying to turn it on nothing happens(no vibration w/ black screen)
if take the battery out and put it back and try to turn it on, the phone would vibrate a bit with black screen
the programs however do recognize the phone when plugged in
well i basiclly tried three things to try to repair it
1. SEUS-which oddly tells me that the phone is up to date but the phone is still a brick
2. PCC- which gave me err
3. Flashtool- which gave me err too(i was trying with X10i 2.1.A.435 Global Generic)
when i tried to flash the phone it told me to turn on the phone then turn on Unkonwn Sources and Debugging... which obviously i can't do
i believe this would be the 1000th time someone post thread about this problem but i have to ask for some help after spending my whole sunday afternoon trying to solve the problem by myself.
i'm on the edge of giving up so this will be my last attempt if nothing new comes up
╰(￣▽￣)╮ thanks to anyone who finished reading this boring thread and if there is a suggestion feel free to post it thanks again
I think we both have the same problem, I tried flashing it to the generic 1.6 fw and I was able to revive the phone. After which I updated it to 2.1 fw, now it seems to be working fine.
maybe a physical problem?
please try to flash with flashtool and post a log
Well, I also had a similar issue after updating a busybox from market on CM 6.1.3 rom.
Download the Flash tool & rom for the following link, follow the instruction & you are done my friend.
http://forum.xda-developers.com/showthread.php?t=928343
I got my phone working again.
All the best & happy modding.
getjayu said:
Well, I also had a similar issue after updating a busybox from market on CM 6.1.3 rom.
Download the Flash tool & rom for the following link, follow the instruction & you are done my friend.
http://forum.xda-developers.com/showthread.php?t=928343
I got my phone working again.
All the best & happy modding.
Click to expand...
Click to collapse
Well, you don't reinstall busybox and/or xRecovery when you are in a custom rom.
Yeh i agree, you've gone a bit too far. Private message obe of the devs, ur situation is way worse than normal bricks.
Sent from my X10i using XDA Premium App
So basically I've just unlocked my bootloader last night. Used three hours to do so. And Before I slept, I flashed DoomKernel v06-1113 and everything was fine. SO I decided to flash DoomKernel V06 as it is said to be highly recommended for the rom I want, "FeraLab" So, I flashed V06 and the next thing that happen was the phone just stucks at DoomKernel Logo. Lasted for 20mins or so. I decided to pull out the battery and inserted it again. Stucked at DoomKernel Logo AGAIN but this time the screen gets dimmer after 4 secs or so. And the whole thing just seem to reboot again. And it goes on and on and on. Decided to take out the battery and just leave it like this hoping it would somehow work the next morning. The same problem just go on and on. But there was once, the whole thing fully rebooted and finally start up. I tried putting the freq to max on Set CPU and it went into reboot again. Straight. Now things just go back like before. Kept rebooting over and over again. I'm hoping for an answer ASAP as I'm gonna need to use my phone for a really really long time later this afternoon. Am going out for basketball practice now and will be checking for any replies. PLEASE AND THANKS IN ADVANCE.
Am gonna try using PC companion to repair. Hope it's a correct choice cuz I dont seem to be able to enter the xrecovery mode
Still waiting for more guidance. Help is much appreciated
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
rickyX10User said:
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
Click to expand...
Click to collapse
it would seems like ur x10 cant handle OC. i suggest u try the FS version
check it at DL thread.
http://forum.xda-developers.com/showpost.php?p=21214246&postcount=1356
here is the thread. try the 3rd option (FS)
remember to flash the wifi module as well
Thanks for your reply but like I said, I cant seem to enter xrecovery. How am I able to flash the rom?
allright buddy i will tell you exactly what you need to do
first thing go to this link
http://forum.xda-developers.com/showthread.php?p=21214246#post21214246
and download the medium overclocked version of the doom kernel which means the v06-1113 doom kernel i have the same problem my phone reboots as well if i used the 1228Mhz version it is just that it can't handle itand you have got that one flashed on your phone so go ahead and flash the v06-1113 doom kernel through flashtool an then it will let you go to xrecovery and i am also using the FeraLab v4
and it works perfect and you can visit the FeraLab rom page by clicking the link below
http://forum.xda-developers.com/showthread.php?t=1458001
Problem solved. Thanks for your help anyway
What I did was I used PC Companion to repair it and flashed v06 1113 into it. Thanks alot for your time and help =)
rickyX10User said:
Thanks for your reply but like I said, I cant seem to enter xrecovery. How am I able to flash the rom?
Click to expand...
Click to collapse
LOL the link i provided is for kernel, .ftf file. it was meant to be flash by flashtool.
as u know, the kernel provide 3 type of kernel (details at Doom's thread), once u flash the kernel, u will able to enter the boot manager (or any recovery that u want)
just wanted to clarify.
glad ur problem solve, but using this method would be easier as u does not need to reconfigure again. personally experienced it b4
But I thought you'll need to turn on your phone, get it connected to FT with it recognizing your phone, then select the file you want to flash, unplug it, turn it off and then enter flash mode. My phone din't seem to be able to be recognized by FT while it was soft bricked
rickyX10User said:
But I thought you'll need to turn on your phone, get it connected to FT with it recognizing your phone, then select the file you want to flash, unplug it, turn it off and then enter flash mode. My phone din't seem to be able to be recognized by FT while it was soft bricked
Click to expand...
Click to collapse
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
sanjays183 said:
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
Click to expand...
Click to collapse
My suggestion is don't go for ICS ROMs... they eat battery and your phone will have to be charged once every 10 hrs... so stick to gingerbread... go for tech devils ROM which is super light and long battery....
Sent from my Transformer TF101 using xda app-developers app
udupa82 said:
My suggestion is don't go for ICS ROMs... they eat battery and your phone will have to be charged once every 10 hrs... so stick to gingerbread... go for tech devils ROM which is super light and long battery....
Sent from my Transformer TF101 using xda app-developers app
Click to expand...
Click to collapse
well, i kinda agree in some of ya point that ics in x10 does eat more battery energy, but X10 it've done its best for 4" screen resolution 480*854, single core 1GHz with only 288MB RAM max. Many people still looking forward for it in ics though. And battery hours in ics (if just message, wifi, phonecall, alarm) can stand up to 3days (until battery 10% left) depending governor and frequency ya set. But if HD gaming, gingerbread still works great because it'meant for gaming including emulating games.
Whitefang
sanjays183 said:
Hi ,
Now i have revert it to2.3.3 ginger bread and it is successfully running. Please suggest which andriod 4 version should i go for my mobile
Click to expand...
Click to collapse
Depends to person liking. For me, Xperia S ICS CM9 by senior Vashista reddy. Great RAM freed and smoothness. Enough for wifi, call, music, 6MP camera uncompressed, but not video camcording or play. Older version still works great and smooth. But newer version jellycream got some fixes needed to be implemented. hope helps.
Whitefang
rickyX10User said:
PC companion never got to fully repair it cuz the part where they prepare the computer to update took too long and it never moved. Decided to try downloading SEUS to repair.
Still waiting for more guidance. Help is much appreciated
Click to expand...
Click to collapse
Hello friend, you cant repair your x10 thru seus or pccompanion coz youre using a custom kernel, my advice is flash a different kernel like thkernel then let it boot, if it successfully booted then try flashing again doomkernel.. Press thanks button if i helped you buddy. :thumbup:
Sent from my X10i using xda premium
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
You said the button still lights up? can you get into recovery? if so just wipe system and install a rom! and try flashing a kernel with flashtool!!!!
RE: Blank Screen After Flashing Custom ROM
Thanx for getting back to me so fast. As I said, the screen is blank. That is, the backlit display works but I can see nothing else. The "Home" button lights up when i press it but the display does nothing. If/When I reboot to try to enter XRecovery, I see the SonyEricsson logo followed by the backlit screen & nothing else. The Volume up/down buttons work as I am able to silence the phone by turning volume all the way down to vibrate. Because I cannot see what's on the display, I cannot turn USB on/off to connect to PC to run SEUS/Flashtool, etc. I.E. I cannot fix the device. Usually I just boot into XRecovery to fix a problem like this but that doesn't work.
x10
hy, install sony update service and repair your phone, then install again custom rom, the indications how to repair your phone software is in the program.
Best regards
Does USB need to be On or Off on the device for Update Service to run?
daRican! said:
Does USB need to be On or Off on the device for Update Service to run?
Click to expand...
Click to collapse
Update says I already have the latest Update installed.
Flash 2.3 off line update
Sent from my Xperia X10 using xda premium
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
seem like u dont have a launcher...install launcher throuh flashtool
lilinbakar said:
seem like u dont have a launcher...install launcher throuh flashtool
Click to expand...
Click to collapse
I wish I had gotten this solution sooner. Not sure if it would have mattered. When trying to use Flashtool I kept getting an error saying my phone was not in "flash mode".
I solved my problem by flashing using Omnius & flashing firmware 'X10i_generic_SE_24_MultiTouch.rar'. This got my phone back but it was only 2.1 so I used 'DooMLoRD_v4_ROOT-zergRush-busybox-su' to get me back to 2.3, but this is where I'm at. I had Wolf's firmware before but right now I have no xRecovery installed. I thought I had rooted my phone but xRecovery isn't installed nor is Busybox.. Any ideas? Thanx in advance...EVERYONE @ XDA-DEVELOPERS rox!
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
daRican! said:
I haven't replied to this post because I'm at my wit's end. I still can't get XRecovery installed & I think I've tried all the methods out there. Maybe my problem is that I restored my phone using Omnius. Flashtool works OK but I can't do anything but Flash on it. My phone is a headache now. It freezes up, crashes & sometimes won't read the SD card. Please help...
Sent from My X10a using XDA Premium
Click to expand...
Click to collapse
C if u can repair phone using SEUS now. Open the software without connecting phone. N then go to the update part. It should give u a repair option. Then follow those steps. Or else just connect ur phone n then start software. When it tells u ur phone is up to date click on that n then click on "repair". Then use the latest flashtool to root. Recoveries come with kernels so just flash a custom kernel.
Sent from my Xperia X10 using xda app-developers app
Many Thanks, I was finally able to use SEUS; before I could not. I used Flashtool to upgrade/downgrade kernel. However, I still don't have XRecovery installed & I'm not sure how to do this. I can't install XRecovery using Flashtool. Any help would be greatly appreciated. I would really like to install a custom Rom again.
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
I'm Back, Baby!
AdX9170 said:
I don't think u need to upgrade or downgrade.. just look for a link to download xrecovery here and follow instructions
Sent from my Xperia X10 using xda app-developers app
Click to expand...
Click to collapse
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
daRican! said:
I'm not sure how it went down but prior to this, I was unable to use SEUS. No matter what I did, I couldn't repair it. However, since your post, I was able to use SEUS & Flashtool to get back to where I was before I screwed up my X10a. I'm currently running Wolf's Rom (many thanx!!!) & am very satisfied w/all your help homey! You da man!
I noticed you are running ICS on your X10i. Any help so that I may partake of that deliciousness?
Click to expand...
Click to collapse
Ur welcome i don't think u need help you just flashed a custom ROM.. the procedure for installing ICS is the same. Although it'd be better if you are on stock before installing it.. just look for an ICS ROM that u like (I'm using feralab n it works like a charm).
Get the kernel n ROM.. as usual, put the ROM zip on ur SD card, flash the kernel, install ROM from recovery
Although before installing:
1. In recovery go to mounts n storage
2. Format system data n cache
3. Mount system, data n cache (note that if the mounting is successful the options should change to unmount system, unmount data, unmount cache respectively)
4. Then install ROM
5. The installer is GUI based so it'll guide u really well through the installation
Sent from my Xperia X10 using xda app-developers app
daRican! said:
I have been visiting this site ever since I first read about X10 & was fascinated by it (I have always loved SE phones). Anyway, I have since gotten an X10i (AT&T) & have de-branded it as well as unlocking & rooting it. Here goes:
I installed Champs' Rom (x10sV9-addon) but didn't want all the clutter he had pre-installed. To make a long story short, I went back to Wolf's ROM via Xrecovery but something went wrong. I can no longer boot into Xrecovery & after SonyEricsson logo, screen goes blank, not black/blue just blank. The other problem is, since I can't see the screen, I can't turn on the USB connection so my PC/Flashtool/SEUS can recognize my device so I can fix it. This happened while trying to re-install Wolf's ROM & installing the following zip files via Xrecovery: Bravia_Xloud engine, Xperia S Player, Champ + Bar, x10_gb_stock_wifi_modules. Then I rebooted & I get the blank screen. I know it is on because I can turn the volume all the way down to vibrate. The "home" button still lights up. PLEASE, I need someone's help with this one as I am no expert, just a moderate tinkerer. ANY help/incite would be appreciated. Sorry, I can't even give you any screenshots. Can anyone out there help me out? Thanx in advance.
Click to expand...
Click to collapse
your LCD flexibel not improperly installed or detached, just open your x10 with screwdriver, and plug it in again your LCD flexible socket.
Iam sory if my english bad
Since I flashed my rom.My phone comes on but I can see anything, even when starting I can't see anything...
I really need help..
I will appreciate if you help me sort it out.