hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
to succeed in doing Flash, you should follow the guidelines given by vippie
check out his thread >>> http://forum.xda-developers.com/showthread.php?t=298613&highlight=button+rom
ewoenam said:
hello, I'm Lucia is the 3nd post one of my friends told me that I see the solution to my problem here.
I have a big problem, my qtek 9100 turn with the three (3) color (bootloader).
IPL 2.21.0001
SPL 2.21
I just flashed but nothing good and even the hard reset
please help me
Click to expand...
Click to collapse
Sorry to say but you’ve bricked your phone
This is what you have
IPL 2.21.0001 = G4 Device
SPL 2.21 = G3 Device
You would need to put a G4 SPL back in the phone
To my knowledge nobody has been able to fix this
Related
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Only with a JTAG device. It's a special device that can access the chips without the need for the phone to be working. But nobody knows which are the JTAG pins so no luck here.
The IPL 1.xx is meant for the G3 DOC chip Wizards and G4 all have IPL/SPL starting at 2.xx.xxxxx. Since IPL is the firt bootloader with information and addresses for SPL and since they don't match you'll never get out of that situation...
Thanks for reply. I have JTAC device and will try to find jtag pinouts for Wizard G4.
havy said:
Hi,
I have Qtek 9100 with IPL 1.01 and SPL 2.20.0001. When I switch on divice, it displeyed color screen and nothing more. I flash it whit many ROM's but IPL/SPL always is the same and did't work normal. How can I resolve the problem. Thanks!
Click to expand...
Click to collapse
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
dont know how
kdskamal said:
Try..
(1) put the phone in bootloader mode
(2) flash it with cingular 1.x radio (search for it)
you should get a normal device in the end
best of luck!
Click to expand...
Click to collapse
(1) OK
(2) DONT KNOW HOW!!
Please help, i never did this. how do i flash the phone if my comp does not recognise it (i can only enter the bootloader screen).
You should
1) Flash only IPL/SPL from g4 (f.e. 2.26.0001) to get your SPL/IPL the same with italian RUU 2.5.2
2) Flash ROM without IPL/SPL italian RUU 2.5.2
yesterday we bringed such device to live) try
how do you compare that with Atom
Hi,
I have got O2 Arom.
does anyone know whether my device is equivelent to G3 or G4?? or its completely diff technology that cannot be compared!!!
I know O2 Atom is by Quanta and it uses CPLD (Complex programmble Logic Design!! I hope i remember this right).
this can't be compared at all, totally different technology. there is a whole separate section for the atom. just go to the forum root page and look for the atom.
please plesae help my spv m3100 flashed wrong
now my phone stop on boot screen and i want to reflash it but it stop on 1 %
my ipl is 1.04
and my spl is 2.03
now what is the solution for me
dvdaio said:
please plesae help my spv m3100 flashed wrong
now my phone stop on boot screen and i want to reflash it but it stop on 1 %
my ipl is 1.04
and my spl is 2.03
now what is the solution for me
Click to expand...
Click to collapse
Try a couple things...
1. Hard Reset
2. Flash a ROM starting at the botloader screen on the phone (put in bootloader, THEN plug into USB)
3. Use mtty, try the task 28 command.
Your solution like everyone else that has bricked there phone on this forum is to start reading. Start with the WiKi and then the 100 page thread on unbricking phones. I'm sure you have a few long hours ahead of you but there is hope at the end of the tunnel
Austinsync speaks truth in abundance! Your first stop should be the excellent unbricking table that dear old Pof compiled, this is in the WIKI and if you are lucky you won't have to go much farther than that...
Hi i flash to my MDA Vario IPL/SPL 3.08 but i can't downgrade !!
Any way to downgrade my MDA ???
It's CDI-Locked
Please help me !!
Thx !!!
If it is really G4, then you have a brick.
not exactly true !
you can download the softspl software which is on this forum,
who is your service provider vodafone, orange etc... ? which country
as you can reflash your ipl/spl back to the original carriers version with this software !
look at this post, it tell you all you need to know in the 1st couple of posts and all files are there...
http://forum.xda-developers.com/showthread.php?t=342744
starkwong is absolutely right,if its a G4 ,flashing 3.08 will definitely brick the phone.
bleep
SoftSPL doesn't reflash back the original official ipl/spl of the carrier,it just only flashes the patched ipl/spl to the phone temporarily to trick the phone in thinking its CID unlocked.Do not misguide the newbies.
CrazyXbox360
Are you sure its a G4 ?what was the original ipl/spl of the phone,before upgrading to 3.08, what is the present status of the phone,does it load up to any OS or is it stuck at bootloaders(tricolor screen) or is it completely dead,non responsive ?
I flashed my G4 with ipl 3.08 but on that post i linked too there are the original ipl/spl files for most carriers and then you put that .nbf in the same directory as softspl (as you would when doing a rom flash) and he presto my ipl/spl is now back to original !
So im talking from my own expereince !
Okay i have a real G4 with IPL/SPL 3.08 !!
But nothing work to downgrade !!
Its a T-Mobile MDA Vario GER
Phone work 100% but i cant flash to a other Firmware !
Download the WST 4.2.2 tool ,run it and post the report it generates here.
WST 4.2.2 tool not work on IPL/SPL 3.08 G4
Post the exact version strings when your are in tri-color screen (If you really flashed G3 SPL to G4, the device should not be able to boot and stays on tri-color screen, which you are not able to use WST).
If IPL is 2.2x.0001 and SPL is 3.08, then it is definitely a brick. If IPL is 3.08 (or 3.08.0000) and SPL is 3.08 (or 3.08.0000), then you misunderstand it, it is a G3 not G4.
cosmabgd said:
WST 4.2.2 tool not work on IPL/SPL 3.08 G4
Click to expand...
Click to collapse
You sure?
Use the "Device Info" button and post the result here...
I have a G4 and accidently flashed wizard love which gave me ipl 1.01 instead of 1.01.XXX. I used SoftSPL-V0.1 to update my ipl back to 2.01.XXX but I still can't flash any rom
did you try to flash it with a "No Vendor ID" Flasher?
HELLO ,I have an I-mate k-jam ,I did the cid ulock,http://www.imei-check.co.uk, the unlock went well and restore the rom tnt 6.0.After I decided to install a new rom Slimv3.1(diamond ) and the wizard after charging correctely the rom started up with the screen with the colour bar:
IPL 2.21.0001
SPL2.21
got stuck on it
I try to to do hardSPL AND softSPl ,doesn't reconise the wizard(no device conneted)
I try to restore original Rom and wizard love :doesnt work ERROR 300
If someone have any idea help me.
thanks
IPL 2.21.0001
SPL2.21
Is it SPL 2.21 or 2.21.0001?
If its 2.21,than I'm afraid you got mixed Bootloaders (IPL/SPL) of G3 and G4,
IPL 2.21.0001 being G4 where as, SPL 2.21 being G3,in this situation nothing can be done to revive it.
How did you get this ?
I try this rom slimv 3.1
i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
xnn said:
i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
Click to expand...
Click to collapse
Your IPL/SPL was 2.26?
That is a G3 IPL/SPL, A G4 IPL/SPL should have been 2.26.0001.
Did the 3.08 upgrade work (that is not a hard SPL either, so without superCID you can't upgrade your ROM.
Please revert to original ROM, then be sure that your Device is either G3 or G4.
unlock the CID accordingly.
Regards,
EqX
xnn said:
i have a problem.i did hard spl to my k-jam. my k-jam(G4)'s ipl spl was 2.26 and i did it 3.08.then i tried it to do wm 6.5(with no ipl spl) but it did not work and ruu end when it was half.and now k-jam does not open and not charging.whan can i do? please help me
Click to expand...
Click to collapse
Had the same problem, the K-Jam is now completely dead - no sign of life whatsoever.
so sorry the-equinoxe . iremembered sth. i did hard spl to my k-jam and it was like that after hard spl : İPL SPL 2.26.0001olip . i did not do it 3.08 sorry for this.
and when i opened RUU fora WM6.5 rom it gived an error. so k-jam was black screen.
then i charged,get the usb,put out battery but it still doesnt work.