When I downgrade P-500 v1.0c to v1.0a.I using Orginal fireware tool.I try many times all error.And It always in Yellow Emergence Screen.Then I try to take battry out.And I cann't "Power On".OH~my God~~~~~What happen.
Sorry to hear that, I'm guessing you don't have a nandroid or a flash custom recovery?The next best step would be to send it to the LG Service Centre.
titan0818 said:
When I downgrade P-500 v1.0c to v1.0a.I using Orginal fireware tool.I try many times all error.And It always in Yellow Emergence Screen.Then I try to take battry out.And I cann't "Power On".OH~my God~~~~~What happen.
Click to expand...
Click to collapse
UR PHONE IS NOT BRICKED AS IT IS ABLE TO LOAD IN YELLOW SCREEN
THIS IS YOUR BEST HELP http://forum.xda-developers.com/showthread.php?t=883314
AND U DONT NEED TO DOWNGRADE ANYMORE AS ALL ROM IS ROOTABLE AT THIS POINT OF TIME JUST CHK http://forum.xda-developers.com/showthread.php?t=883314
JUST READ BOTH THREAD A ND U WILL BE OUT OF IT PLAYING WITH ANDROID. DONT WORRY
did you try pressing power button, volume down, home button when you turn on i know when i did it before i installed a custom recovery it would reflash the original firmware and it was like turning my phone on for the first time
plz read before rooting or downgrading!!
new rooting tool released which does not need downgrading!
Related
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
hey man
try to post more info as
*your device(p3400 or p3400i)
*what was your spl
*what is your device serial(starts with "ht7xxx" or "ht8xxx")
and try to do this remove the battery and wait for a while then connect it again and then press and hold camera button meanwhile press and hold power button too and wait till you see a screen of three colors (green ,blue ,red) and then release .if this screen appeared so there may be a very good chance to get it alive again.
and try to post exactly what happened.
bye
is p3400
i think spl was for some other device
got it frm a frnd who said he made the rom
noo
it doesnt work no response
after the upgrade the device became dead
as i searched isaw somewhere that the spl was corruoted so plz help
hey man
your spl means the numbers that used to appear when your device used to start(in the HTC logo screen) try to remmember it!!!!!!!!
and what does your device serial start with? (ht7 or ht8) you can find it under the battery .
what the link of the rom upgrade you used?
and try the to press and hold both camera ,voice buttons meanwhile press the power button.
ok
bye
Hi check my post in wm6.1 for new gene thread on page 7 (post #63)
sebulu07 said:
mine is dead no display after rom upgrade
onle led are blinking
jtag method not working
desperate for heelp
sure it occured after flashing plzz help some how i need to enter
bootloader mod plzzz
not hardware pblm
Click to expand...
Click to collapse
serial
mine is 7x serial its starts with ht7.....
♠♠♠PLeaSE HeLLLP MY p3400 bricked♦ NeED HelP URgently♠♠♠♠
dear bros. am using HTC gene. yesterday am thought to upgrade my Phone OS and i do the olipro method . first am copy gene_hspl.exe into my phone memory and click to that file . then the PHONE was switch off .after olipro methord my phone ded (only red and green button blinks when i press the power butten).and am go to the orefkov method . but the last...... " ROM update utility " runs in my pc an error message display. "ERROR 200 " ."pls get newer update utility". pls help me . now my phone was
switch off. pls replay urgently.
any trick for swith on my phone., like to remove gene_hspl.exe from the phone memmory(just my idea).
or how to start my phone ....
adv thx.,,,,,,,,,,...................
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
same problem
@krrahuldev
Did u manage to fix ur phone?
i have the same problem
My handset not going in boot loader mode
only ( green + red ) button light blink
try upgarde the rom , allways connection error
any solution will be helpfull
Thanks in advance
try killing the wcecomm.exe process from task manager again!!
hope it works
tryed , but the computer does not detect the handset,
Even check in DEVICE MANAGER ,does not show anything
Dear,
Can u please tell us which Operating System u are using. U might need to change the USB drives given by Krazy.
i am useing windows XP
Any link will be usefull
please check ur private msgs....
this phone came to change the lang
Original rom was : RUU_Gene_HTC_RUS_1.7.411.0_4.1.13.31_02.71.90_Ship _Abdie.exe
From
Russian to english
I use Olipro For Old Gene
After that i upgarde the rom
with this file
RUU_Gene_hTC_Asia_India_1.17.720.1_4.1.13.34_02.79 .90_Ship.exe
After the upgrade it showed sucessfull
But the handset did not power on
Only lights comming on the ( Red- green button )
& now even the computer does not detect the phone
press n hold camera button n reset if u hv done previous steps properly it wil go to bootloader mode!
tryed many times but does not go into bootloader
sams said:
tryed many times but does not go into bootloader
Click to expand...
Click to collapse
Hold Camera Button and press "Soft Reset " which is at the Bottom of phone..
try This
same problem but now cant get in bootlaoder anymore,pls help
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
excelpass said:
same problem but now cant get in bootlaoder anymore,.when on the green n red light blink 1 time only ,pls help
Click to expand...
Click to collapse
remove battery and then press on button then put battery back and then try to above method .
Any Trick for restoring boot file??
cuteitsme said:
Dear Pls try with the ROM Update Utility attached below. Even I used to get this error sometimes back. But after using this utility I have never faced any issues....
Click to expand...
Click to collapse
Hello Brother .,
not working for me the update tool to attached by u... the same prob shows.!!!!!!!!!!
any trick for restoring my p3400 rom? for working condition???
pls reply immediately...........
are u able to get into the boot loader mode??
unless n until u r able to enter the boot loader mode the ROM update utility will not detect your phone.....
Problem
i have the same problem
My handset not starting on
only ( green + red ) button light blink
try everythin yaar
any solution will be helpfull
Thanks in advance
HTC P3400 good bye
i got the same proplem my mobile was stucked in bootloader screen i used mtty & successfully completed the rom update after that my phone give nothing even no bootloader screen so i have to say good bye
Hi
i got a new t-mobile htc hd2 a few days back later
i don't know what happens to it first it get started and stuck on the main screen of startup "stick together"
and i go to market and now the phone do not turns on when i tried to turn it on
so guys please help me what i have to do now
any solution any custom rom--flashing please help me
thanks to all of you
it's not "bricked" mate, bricked means that not work nothing, no bootloader no nothing ( as mine )
phone stay in black screen.
maybe you solve re-entering in bootloader mode ( tri color screen )
and re-flashing phone
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
mianhadi143 said:
so what i have to do now brother
please help me i want to use it
i am waiting for ur reply
thanks
Click to expand...
Click to collapse
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
ubejd said:
Download a t-mobile rom stock rom first - be very carefully dont use other rom
Just go into bootloader - torn one phone while pressing volume down until you se tricolor screen... connect with pc and wait until drivers are installed and then flash the rom
Click to expand...
Click to collapse
You need to make sure you download a rom based on your version of HD2. Do you have the European version, or Tmo versoion?
hi guys,
i need help
i try to install a mod for a rom
and then the phone couldnt open
it restrarts again and again
then i try to install a different recovery via odin(thought that was solve the issue)
after instalation try to switch it on, i press the power button
and the phone does nothing :/
nothing at all
even the screen cant open :/
Any suggestion???
PLZZZZZZZZZZ
Service centre. And before you say something like 'but I need my phone blah blah blah', what do you expect anyone here to say ? If the phone won't boot normally & can't boot into recovery or download modes, you're SOOL.
Edit - Stuff like 'emergency' & 'plzzzzz' only annoys people here. Makes it less likely you'll get the help you need, not more.
basilhsk.7 said:
hi guys,
i need help
i try to install a mod for a rom
and then the phone couldnt open
it restrarts again and again
then i try to install a different recovery via odin(thought that was solve the issue)
after instalation try to switch it on, i press the power button
and the phone does nothing :/
nothing at all
even the screen cant open :/
Any suggestion???
PLZZZZZZZZZZ
Click to expand...
Click to collapse
you probably bricked your phone by the 4.0.4 brick bug, sammy wont even fix it for you, u should have just reflashed a clean rom before messing with the recovery.
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
sachin mensi said:
hi this is the only place where i could find some help so i want to ask ....i rooted my phone .....i did clockworkmod recovery ......i wanted to install android kitkat by cyanokat ...and ...i followed every steps correctly while flashing new rom ... but at last.... while the process was going to end ....i without of knowledge took of the battery ......then then i pressed the power key the bootloader is blank and with vol- and power keys i could access only fastboot screen..... i am so worrying about it ...and need a way i could reset it to stock rom ....... .....guys i dont know what to do next i googled many things to reset but none helped ..... you are my last hope guys ....pls help...any little help is my pleasure
Click to expand...
Click to collapse
do you have the stock backup? if you do then you could flash the files via fastboot. else, just use SP flash tool