Related
Hello.
First of all, to make ppl less irritated of this thread as there are several threads about this problem. Ive searched, looked, noticed that ppl has this similiar problem, but I still cannot figure out what I am doing wrong.
However, to the point.
Ill let you know, step by step what I have done, to make it a bit simple for you to help me.
Ive downloaded a couple of files, named Freex10-beta.zip, gapps_1901_Freex10-zip, xRecovery and Busybox.
All of these files (exclude Busybox which I installed from the market) were copied into the sd memory card, the root of the sd card.
I rooted my phone with the software, superoneclick.
I installed xRecovery and busybox (busybox says that my phone is rooted), then I opened xRecovery and clicked install, without any problems, the three locations got green. Means succesfull?
Now to the problem, I turned of my phone, switched it on and clicked the back buttom. Got stuck at the Sony Ericsson logo. Stinks!
Please, I really want to upgrade my phone. Cant stand out that ppl has the 2.2 while im still on 2.1 official
Version: 2.1-update1
Kernel version: 2.6.29
Edit.
Stuffs Ive tried out:
- Removing the battery for a couple of seconds
- Tapped the back buttom once, twice, three times and so on. Doesnt work for me.
EDIT ONCE AGAIN (READ):
Due to the new update for the X10HD I was able to run the xRecovery. There was nothing wrong with the setup I made however if any1 has the same problem as I do. Please enter this thread and go to the buttom of the first post and you will find an apk. file named xRecovery-0.2-X10HD-release.apk ( http://forum.xda-developers.com/showthread.php?t=859571 ).
Follow this howto if you got problem: http://forum.xda-developers.com/showthread.php?t=908791
AND! Thousend thanks for the support members, love to you all!
you must click the back button several times to access xRecovery.
Tehouster said:
you must click the back button several times to access xRecovery.
Click to expand...
Click to collapse
Thanks for the reply, but I have already tried that. Ive tried to push it one time, two, three and even held it as long as I can. Nothing works.
I am going to give it a last shot from the beginning, going to unroot the phone and do everything from step one.
However, got any other clues why I am occuring this problem?
remove the battery, wait for few minutes, insert it again and tap it several times. it worked for me.
hi! i have the same problem though i cant access xrecovery menu now that i am on free x10.. what i did before flashing to freex10 is exactly what you are doing but with additional.. try this, it worked for me
download gscript lite from the market.. then do what you did earlier, installing busybox, pressing install xrecovery then, after installing xrecovery menu.. do this..
http://forum.xda-developers.com/showthread.php?t=895351
hope i helped you in a way.. :] i always do that for me to access recovery menu, though i cant make that now because at beta3 it is not allowed to reinstall busybox and xrecovery (if i did ill get FC loop)..
furbycles said:
hi! i have the same problem though i cant access xrecovery menu now that i am on free x10.. what i did before flashing to freex10 is exactly what you are doing but with additional.. try this, it worked for me
download gscript lite from the market.. then do what you did earlier, installing busybox, pressing install xrecovery then, after installing xrecovery menu.. do this..
http://forum.xda-developers.com/showthread.php?t=895351
hope i helped you in a way.. :] i always do that for me to access recovery menu, though i cant make that now because at beta3 it is not allowed to reinstall busybox and xrecovery (if i did ill get FC loop)..
Click to expand...
Click to collapse
Thanks, Ive installed Gscript lite but I cant seem to find any damn files when I press load. Maybe my version is to new for Gscript lite?
It shouldnt have to be this hard to do something like this! Wasted hours and hours trying to find solutions, but hell no nothing is working god damnit :/
Edit. When I press List SD-card all the files inside the SD shows up in a blue screen
for automatic xRecovery you must have : superuser, busybox, root permissions..
so if you don't have that, automatic xRecovery doesn't work.
Tehouster said:
for automatic xRecovery you must have : superuser, busybox, root permissions..
so if you don't have that, automatic xRecovery doesn't work.
Click to expand...
Click to collapse
I have these three files installed, Ive managed to install the xRecovery but not been able to enter it when I boot my phone.
Do you think it has to do with my version of the x10, I have 2.0.2.A something maybe it doesnt work with my version?
you have 2.1?
it doesn't matter.
Well then I find it strange as hell! Why me of all the ppl around here, I cant be that noobie?
Busybox says that my phone is rooted, I am able to install xRecovery, I get all the three things marked as green, which means succesfully installed, I have superuser, or else I wouldnt be able to install them.
What am I doing wrong, has any1 out there been through this problem and solved it?
I did the same thing as you.. I rebooted. when the white SE logo show up.. I tapped the back button several times and xRecovery showed up..
Freak174 said:
Hello.
First of all, to make ppl less irritated of this thread as there are several threads about this problem. Ive searched, looked, noticed that ppl has this similiar problem, but I still cannot figure out what I am doing wrong.
However, to the point.
Ill let you know, step by step what I have done, to make it a bit simple for you to help me.
Ive downloaded a couple of files, named Freex10-beta.zip, gapps_1901_Freex10-zip, xRecovery and Busybox.
All of these files (exclude Busybox which I installed from the market) were copied into the sd memory card, the root of the sd card.
I rooted my phone with the software, superoneclick.
I installed xRecovery and busybox (busybox says that my phone is rooted), then I opened xRecovery and clicked install, without any problems, the three locations got green. Means succesfull?
Now to the problem, I turned of my phone, switched it on and clicked the back buttom. Got stuck at the Sony Ericsson logo. Stinks!
Please, I really want to upgrade my phone. Cant stand out that ppl has the 2.2 while im still on 2.1 official
Version: 2.1-update1
Kernel version: 2.6.29
Edit.
Stuffs Ive tried out:
- Removing the battery for a couple of seconds
- Tapped the back buttom once, twice, three times and so on. Doesnt work for me.
Click to expand...
Click to collapse
try THIS tool and check HERE how to use it.
side note: if still got problems flash again (you can use the tool)
side note: you can use any other button to enter on xRecovery yet do not use home button `cause if you enter on it will reboot
rendeiro2005 said:
try THIS tool and check HERE how to use it.
side note: if still got problems flash again (you can use the tool)
side note: you can use any other button to enter on xRecovery yet do not use home button `cause if you enter on it will reboot
Click to expand...
Click to collapse
Thanks for the reply.
I went into the link, but as Ive understood, you are not able to install the custom rom for 2.2 froyo. Only switch between 1.6 and 2.1.
And also some other more stuffs, however, can you confirm that it is possible to install the custom 2.2 froyo rom with the flash tool?
Thanks
Freak174 said:
Thanks for the reply.
I went into the link, but as Ive understood, you are not able to install the custom rom for 2.2 froyo. Only switch between 1.6 and 2.1.
And also some other more stuffs, however, can you confirm that it is possible to install the custom 2.2 froyo rom with the flash tool?
Thanks
Click to expand...
Click to collapse
No man. The idea is for you to get xrecovery to work.
Use that tool for that.
The other idea i left is: if you still cant get that to work flash again and follow the rest of the guide.
Ah I see well I will it a shot but First I must ask something that I find abit weird.
When I install busybox, u are able to choose 2 directories where you want it installed. Either in "system/bin" (works fine) and "/data/local/tmp" (does not work).
Or nevermind seems to be working now, strange.. before it says that I need nand unlocked?
However, my point is that I am trying to use a app called gScript, but when I load "xRecovery.sh" it says:
stderr: mkdir failed for /data/local/tmp/
xrecovery, File exists
stderr: mount: Device or resource busy
stderr: rm: failed for -rf, Read-only file system
stderr: cp: cant stat 'sdcard/gscript/
chargemon': No such file or directory
stderr: cp: cant stat '/sdcard/gscript/
busybox': so such file or directory
However, I will now try to flash my phone and install xrecovery through it. But Id appreciate some help with my gScript 2
Edit 2:
Ive installed flash tool, it connects to my phone without problem.
I went into custom/apps/ and found a folder called xrecovery, which was empty so I dragged my xrecovery.apk file there, clicked customize ( Customize installs apps found in the custom/apps folder of the flashtool).
But I cannot read anything about xRecovery in the log:
28/014/2011 16:14:36 - INFO - Searching Adb Device
28/014/2011 16:14:36 - INFO - Device connected
28/014/2011 16:14:36 - INFO - Customize finished
Freak174 said:
Ah I see well I will it a shot but First I must ask something that I find abit weird.
When I install busybox, u are able to choose 2 directories where you want it installed. Either in "system/bin" (works fine) and "/data/local/tmp" (does not work).
Or nevermind seems to be working now, strange.. before it says that I need nand unlocked?
However, my point is that I am trying to use a app called gScript, but when I load "xRecovery.sh" it says:
stderr: mkdir failed for /data/local/tmp/
xrecovery, File exists
stderr: mount: Device or resource busy
stderr: rm: failed for -rf, Read-only file system
stderr: cp: cant stat 'sdcard/gscript/
chargemon': No such file or directory
stderr: cp: cant stat '/sdcard/gscript/
busybox': so such file or directory
However, I will now try to flash my phone and install xrecovery through it. But Id appreciate some help with my gScript 2
Edit:
I just installed the flash tool on the computer now, started flash tool but it does only support ftf files, what am I supposed to do with it?
You said I was going to install xrecovery correct with it, but xrecovery is not a ftf file so how am I supposed to flash it?
Click to expand...
Click to collapse
please see THIS GUIDE for that
I am sorry, I went into that guide but didnt go far down on the thread. I managed to install busybox AND xRecovery with the flashtool, just went into advanced xD
I also noticed that you are the publiser of the guild, well done I must say!
Now I will reboot my phone and press the back key and we will see.
Edit:
Well I still cannot enter xRecovery. This stinks! I cant be doing anything wrong, my phone was bought the 14 january, maybe there has been some kind of upgrade with it? But I dont really think so..
Arent there any other software that are able to upgrade to the 2.2 froyo beta 3?
Freak174 said:
I am sorry, I went into that guide but didnt go far down on the thread. I managed to install busybox AND xRecovery with the flashtool, just went into advanced xD
I also noticed that you are the publiser of the guild, well done I must say!
Now I will reboot my phone and press the back key and we will see.
Edit:
Well I still cannot enter xRecovery. This stinks! I cant be doing anything wrong, my phone was bought the 14 january, maybe there has been some kind of upgrade with it? But I dont really think so..
Arent there any other software that are able to upgrade to the 2.2 froyo beta 3?
Click to expand...
Click to collapse
man...sorry, but if you had your phone rooted, installed busybox & xRecovery, then...it`s your problem. Not rom, not phone, not nothing except you and the way you press back button. period.
like i said before other buttons work aswell. try it. maybe you have a back button problem?
just press more or less 8/10 times without any hurrys
ohh and by the way. thanks
rendeiro2005 said:
man...sorry, but if you had your phone rooted, installed busybox & xRecovery, then...it`s your problem. Not rom, not phone, not nothing except you and the way you press back button. period.
like i said before other buttons work aswell. try it. maybe you have a back button problem?
just press more or less 8/10 times without any hurrys
ohh and by the way. thanks
Click to expand...
Click to collapse
I have tried several buttoms, tried everything believe me. Been spending hours to fix this.
Is xrecovery the only program I can use to upgrade into a newer version?
Freak174 said:
I have tried several buttoms, tried everything believe me. Been spending hours to fix this.
Is xrecovery the only program I can use to upgrade into a newer version?
Click to expand...
Click to collapse
yap...only way
Newb here. Any help would be great. Do I need to re flash something? Phone works fine, no issues. Just cant seem to get back into CWM.
I'm having the same problem on my Vibrant. It seems this is common when flashing 2.3.3 ROMs. CwM is probably working, you just can't see what you're doing. Reboot back into CwM, and try pressing the power key once the device "freezes." If it reboots, CwM is working, it's just invisible.
I'm also a noob, and I happen to be trying to fix the same problem.
hi everyone,
i have tried to update my x10i to android 2.3.3 via http://forum.xda-developers.com/showthread.php?t=911364 and after not having any luck i formatted everything via xrecovery and not my phone just says sony ericsson and does not go any further and i cant boot into xrecovery anymore.
i have to pull out the battery or else it tries to boot again.
So what am i doing wrong and how can i fix this????
thanks,
Alex
Use PC companion/SEUS/flashtool to flash your phone back to 2.1
You didnt use the format options in 'partition tools' did you? If you used the 'format system' option you removed everything including XRecovery files and flashing may not work. I think your problem with the 2.3 install was likely because of the wrong baseband.
Never wipe the phone after installing a ROM all it will do is erase what you just did and you'll need to reinstall. If you reboot after wiping you no longer have a FW on your phone. Just read the instructions and follow each step exactly and you wont have any problems. Almost any problems you have can be avoided by simply reading.
Sent From My *Super Fly X10*
If I (or anyone for that matter!) help you, dont be afraid to press THANKS!
Sues maybe your only choice . And you may of lost any backuls or photos if you have formatted your sd card.
Hope you get it back working
sent from my x10 with more roms than sense
Hello to all,
Firstly first post to this site and also new to the world of rooting/flashing so bare with me on this one..
Ok as title states I would like to know on how to successfully flash my x10 and receive the benefits that xda have given to alot of us!
Phone specs:
Xperia x10a.
Ver 2.1update1.
Rooted via super one click.
So far I have only been able to root the phone.. I have TB and have performed a back up recently. I do also have the Rom Manager app whilst watching a tutorial via youtube flashing using the Rom Manager I was not able to use the Flash ClockworkMod Recovery as the x10 was not in the listing to proceed. I have also got xrecovery ver 0.3 and tried another method using this but I was not able to install xrecovery properly.. I downloaded it all well and good but went to install and the 3 windows never became ticks just crosses.. Uninstalled and reinstalled but to no avail it did not work..
So my questions are:
Have I done something wrong on my end for this not to work? (knowing my luck yes).
And all I'm after if someone could take the time out and lay out a clear somewhat easy path in order for myself to be able to flash and install custom Roms? cm7 is what I would like to use unless if a good recommendation is given.
Thank you in advance to all and I do apologize for the long post I just wanted to make sure I covered everything.. Still new to this
Kind Regards.
Agera.
Xrecovery installer can be a bit troublesome. Sometimes it doesn't even work for me.
In my opinion, the best way to install xrecovery, root, & jit enable your x10 is through flashtool. You will need a PC but the process works better than the installer. Try that method and find out if that works.
Hey thanks for your reply, my noobness is showing greatly at this point regarding xrecovery... it'll help if I actually click install busy box and destination folder (duh) made me look....yeah Ok well now I have a phone that has been rooted and now have xrecovery in operation, I guess now comes to install a custom rom.
Now to sum it all up basically I have to copy paste desired rom and google rom pack load it onto the sd card (not in any file inside sd but just on sd) perform final backup get into xrecovery factory wipe first? I believe then custom rom reboot then get back into xrecovery then install google apps reboot and done?
I hope I got that down I'm trying to remember processes without having to go back to a tutorial, if I left anything out permission to give me a clip over the ear
Cheers.
When you pick a ROM, make sure the phone's baseband matches the ROMS baseband the developer wants. Also, follow how the way the dev wants the ROM installed, like phone wiped and cache wiped and stuff. And sometime there are multiple files that needed to be flashed in a specific order in xrecovery. So make sure you follow all the devs directions. Hope this helps.
Sent from my X10i using XDA Premium App
and you can find different ROMs that don't require you to flash googleapps as well, that just makes it confusing. I started with FreeX10, as it was simple and easy to install. once you have a hang of it, I recommend using Trip's GB MIUI. and you said you backed up phone before you installed xrecovery? I recommend you backup using xrecovery first
Sent from my X10 TripNMiUI using XDA Premium App
fixed phone was able to get back into xrecovery and do a restore...
Ok, something I want to ask regarding what I did today when I went to update to a newer o/s eveything went fine until after the phone rebooted and came back to the home screen the 2.2.1 froyo rom I used seemed to be refreshing itself every 2 seconds which made it next to impossible to navigate around the phone... The arc version 2.3.1 opened up and about 30 seconds it froze restarted and shut down again did that for a while... So both didnt work for me only other thing I opened up was the google pack so I could get the market and gmail, I also tried it without installing google apps... same thing happened.
So my question is have I forgotten to put an extra file in? or was it my blind luck that I used to unstable roms?
I've really tried here.. if anyone can please post a link that is certain to work with exactly what i need to do and what files I need that would be really great. Whether its 2.2 or 2.3 it doesnt matter to me so long as it works at this stage I'm having no luck getting something solid here...
Cheers.
Hello. I am quite new to the scene, and I have very little technical knowledge, so I feel real lost in this forum.
I have tried Slade's CM v7 umm Cyanogen or something, the latest version - v5. I loved it to begin with. But after a week or so, phone seems to be getting more and more laggy, and more and more unstable. I tried Over Clocking it, but that resultet in instant reboot. So I do not use OC. Yet my phone reboots all the time. (Literally, several times a day)
I play alot of games on my phone, this is mainly what I do. I'd love to be able to Over Clock it alittle, but I want stability more than anything.
Now I am considering trying FroyoComb - only because I read somewhere in a post that it did well on benchmarks, but I really have NO idea what I should go for!
Does anyone have any reccomendations? I play alot of games, don't want alot of reboots.
Thanks for any quick reply (I am ready to just flash this ROM right away! If I can find out what CWM is and how to install it)
go here for the froyocomb rom..ive try it and its good for playing game..and here for the CWM..gud luck
Hey man froyocomb is alright but cyanocomb is the same rom but cleaner and with more fixes it was made also by d4
Sent from my mini pro running CyaNoComb by d4
Hello and thanks for help. The problem is, I cannot get xrecovery working. I had the same problem for weeks when I installed the ROM I currently have.
Dark's automatic D4 app does not work at all (it literally does nothing upon launch/pressing buttons)
The 0.3 xrec installer worked successfully after I entered Root Explorer first, mounted /system/bin as R/Wm but still nothing happens when I boot and press back.
I have installed busybox both in /system/xbin and /system/bin, I have tried with newest version 1.19..and I have tried also 1.17 and 1.15. Aswell as in with a combination with manually placing chargemon and xrecovery.tar in bin, and editing their permissions correctly.
Nothing works for getting xrecovery to work, and I wish I remember how I solved it last time. I think someone wrote a post somewhere about mini pro specifically, and with latest version 2.A.0.6 (or what it is) and it said something like "fool proof way of making xrec work" and it actually instructed to just copy two files and NOT edit their permissions.. But like I said, I can't find that post now and there is basically 100 posts about people not getting xrec to work, with different symptoms.
Any idea what I should try?
charger trick pull battery n plug in charger let it charge n then turn on then pull charger
PerKiller said:
Hello and thanks for help. The problem is, I cannot get xrecovery working. I had the same problem for weeks when I installed the ROM I currently have.
Dark's automatic D4 app does not work at all (it literally does nothing upon launch/pressing buttons)
The 0.3 xrec installer worked successfully after I entered Root Explorer first, mounted /system/bin as R/Wm but still nothing happens when I boot and press back.
I have installed busybox both in /system/xbin and /system/bin, I have tried with newest version 1.19..and I have tried also 1.17 and 1.15. Aswell as in with a combination with manually placing chargemon and xrecovery.tar in bin, and editing their permissions correctly.
Nothing works for getting xrecovery to work, and I wish I remember how I solved it last time. I think someone wrote a post somewhere about mini pro specifically, and with latest version 2.A.0.6 (or what it is) and it said something like "fool proof way of making xrec work" and it actually instructed to just copy two files and NOT edit their permissions.. But like I said, I can't find that post now and there is basically 100 posts about people not getting xrec to work, with different symptoms.
Any idea what I should try?
Click to expand...
Click to collapse
Sent from my U20i using XDA App
PerKiller said:
Hello and thanks for help. The problem is, I cannot get xrecovery working. I had the same problem for weeks when I installed the ROM I currently have.
Dark's automatic D4 app does not work at all (it literally does nothing upon launch/pressing buttons)
The 0.3 xrec installer worked successfully after I entered Root Explorer first, mounted /system/bin as R/Wm but still nothing happens when I boot and press back.
I have installed busybox both in /system/xbin and /system/bin, I have tried with newest version 1.19..and I have tried also 1.17 and 1.15. Aswell as in with a combination with manually placing chargemon and xrecovery.tar in bin, and editing their permissions correctly.
Nothing works for getting xrecovery to work, and I wish I remember how I solved it last time. I think someone wrote a post somewhere about mini pro specifically, and with latest version 2.A.0.6 (or what it is) and it said something like "fool proof way of making xrec work" and it actually instructed to just copy two files and NOT edit their permissions.. But like I said, I can't find that post now and there is basically 100 posts about people not getting xrec to work, with different symptoms.
Any idea what I should try?
Click to expand...
Click to collapse
Download the new Recovery Installer app! Just choose the recovery nd ur done!
I had trouble with xrecovery too, the method I found to work is to grab titanium backup form the market, then click on problems in titanium backup and it downloads busybox, after that grab a terminal emulator and use the aais installer, thats the only way I got mine to work.
The new installer seems to be working fine too so should be easyer.
CWM works perfectly and slades cyano roms are using it already, I prefer the cm6 tho, still based on froyo but almost perfect, cm7 still bit buggy.
Actually im using froyocomb, since thats the last most updated version and based on cm6.
overclock never worked on my mini pro, it always ends in crash loop.
I can play all games allright on froyocomb, still lags a bit on some games but the battery last way longer than any other rom ive tried.
CyanoComb! Done.
P.S. I loved the title (''forest'' thing)
No methods for installing xrecovery works. I cannot get off stock rom (again).
Use quagger's AAIS its in the forums, scroll down!
I tried his AAIS! ;P
Now I am using SEUS to start over. So this is my plan:
-Restore phone to stock.
-Root phone with SuperOneClick - NOT install busybox with it. NOT install busybox through Titanium Backup (although it seems like thats not an option anymore with newest version anyway), NOT install busybox through busybox installer from market.
-Use AAIS to install "xrec for mini pro"
Does this sound like the correct approach?
or you can just after restore phone to stock, root it and then install Mini ROM Maneger and with this app install CWM Recovery. than you can install custom rom
Eyama said:
or you can just after restore phone to stock, root it and then install Mini ROM Maneger and with this app install CWM Recovery. than you can install custom rom
Click to expand...
Click to collapse
I tried that now. But I tried it AFTER I tried D4's xrec installer. Then trying to install xrec manually. Then I tried the ROM manager CWM-installer, which yielded NO results.
I want the most failproof way here. I don't want to SEUS any more
you don't need to SEUS all the time if any of recovery isn't installed.
use this xrecovery for manual installing and you have great tutorial there.
when you successfully installed xrecovery than you can install CWM Recovery form Rom maneger.(CWM Rcovery is better beacuse is included in all roms)
i hope you could make it working
Eyama said:
you don't need to SEUS all the time if any of recovery isn't installed.
use this xrecovery for manual installing and you have great tutorial there.
when you successfully installed xrecovery than you can install CWM Recovery form Rom maneger.(CWM Rcovery is better beacuse is included in all roms)
i hope you could make it working
Click to expand...
Click to collapse
But so many say different things. Some say: Install busybox from market (which is 1.19 atm) Some say: DO NOT INSTALL BUSYBOX cause xrec comes with it. Some say: Download Titanium Backup and click problems to install busybox. Some say: Let superoneclick install busybox. Some say: It doesn't matter if you installed busybox first or not, xrec will correct it. Some say: OMG if you install wrong version of busybox you cannot make xrec work; SEUS.
So... should I install manually? And what is permission chmod 777. Read, Write, Execute. Read, Execute. Read, execute.?
EDIT: And already now I am getting conflicting instructions. One person is telling me to install CWM through the "ROM manager" and another person is telling me to install xrecovery manually. I don't want to start spamming 20 different ways of doing it to my phone again, just feeling like I have no idea what I am doing or what the results are.
PerKiller said:
No methods for installing xrecovery works. I cannot get off stock rom (again).
Click to expand...
Click to collapse
To get to stock rom again, just follow my guide here:
http://forum.xda-developers.com/showthread.php?t=1125587
[FIRMWARE]2.1.1.A.0.6 Greek .ftf+.sin files. Install the .6 kernel with 015 baseband!
In my guide, FlashTool is included with which you can root, flash roms and INSTALL xRecovery with just ONE CLICK!
Yeah, I know, I am the best, just click THANKS! xD
Sent from my U20i using XDA Premium App
leajian said:
To get to stock rom again, just follow my guide here:
http://forum.xda-developers.com/showthread.php?t=1125587
[FIRMWARE]2.1.1.A.0.6 Greek .ftf+.sin files. Install the .6 kernel with 015 baseband!
In my guide, FlashTool is included with which you can root, flash roms and INSTALL xRecovery with just ONE CLICK!
Yeah, I know, I am the best, just click THANKS! xD
Sent from my U20i using XDA Premium App
Click to expand...
Click to collapse
Sorry, but "I cannot get off stock rom" means I was stuck with stock. I have no problem getting back to stock.
Anyway, now I got xrec to work. From what I understand, the newest ROM-releases are made in zip-files made for CWM (CWM is like xrec, but upgraded and better) correct? So now, I downloaded cwm3minipro.zip but I have no idea what to do with it.. how I make CWM replace xrec?
Thanks
Sorry, I need to revise my phrasal verbs... xD
Yeah, xRecovery now belongs to the past, CMW is the future. To install CWM just flash this .zip through xRecovery and here you go!
Sent from my U20i using XDA Premium App
PerKiller said:
I tried his AAIS! ;P
Now I am using SEUS to start over. So this is my plan:
-Restore phone to stock.
-Root phone with SuperOneClick - NOT install busybox with it. NOT install busybox through Titanium Backup (although it seems like thats not an option anymore with newest version anyway), NOT install busybox through busybox installer from market.
-Use AAIS to install "xrec for mini pro"
Does this sound like the correct approach?
Click to expand...
Click to collapse
Install busybox using superoneclick root and use AAIS?
hi perkiller
try this http://forum.xda-developers.com/showthread.php?t=913136
its the one click root and xrec solution from mikevhl and until now has worked on all mini pro's which were difficult to xrec or root
greetings
metachuh