Hello.
I was about to install Euguene "Froyo that cannot be bricked" and somehow I did not uncheck the "repartition". And then I clicked start. Somewhere in between when ODIN was writing on to the phone, I saw the partition check and as a reflex I removed the USB cable. That was followed by the red Screen, and then Dead.
I have tried to reboot it, put it into download mode, and loads of other combinations. Nothing seems to be working out, I cannot see the battery sign, nor can I see the buttons i.e. no matter what I do, the phone remains dead.
I am in total shock as I had just bought it two weeks ago and apparently experimenting has come to bite me back in the butt cheeks. Please, can anyone guide me in this matter, I am, no kidding, desperate.
Regards,
Shifty
just take the battery off... and put it back on and start from the very beginning... i mean the odin process... then leave it be... best ROM id suggest is bionix-v 1.3...
I believe you should look into a usb jig. try to google team whiskey usb jig -or- edt usb jig. Honestly you should be able to get your phone into download mode with different combinations just don't give up. The jig will make all this easier. Once you do then ODIN to stock and root, flash CwMRecovery, and just flash custom ROMs with CwMRecovery. Personally I never use ODIN untill its ABSOLUTELY NECESSARY and i mean i havent had to ODIN this year yet cuz nandroids are our friends. Good luck!
Try this. Remove battery hold volume up and down plug in micro usb. Should kick you into download mode. If not try it with the battery in. That's how I recovered from a bad soft brick once. There still hope these phones are pretty hard to brick from flashing roms. Its when you mess with the bootloaders is when crap hits the fans.
Sent from my SGH-T959 using XDA App
TOTALLY WORKED!!!
Took out USB, SD and Battery.
Kept holding the Volume buttons, plugged the USB and inserted the battery!! Went direct to download mode!!
Thank you All and XDA!
Cheers!!
You lucky duck!
shifaat said:
TOTALLY WORKED!!!
Took out USB, SD and Battery.
Kept holding the Volume buttons, plugged the USB and inserted the battery!! Went direct to download mode!!
Thank you All and XDA!
Cheers!!
Click to expand...
Click to collapse
i'm on the same boat, but it doesn't work with me. my vibrant totally bricked. i tried to take out usb, sd, and battery, then keep holding volume button while i'm plugging in the USB and the battery. nothing!
ad3qz said:
i'm on the same boat, but it doesn't work with me. my vibrant totally bricked. i tried to take out usb, sd, and battery, then keep holding volume button while i'm plugging in the USB and the battery. nothing!
Click to expand...
Click to collapse
Do you have any light on at all? anything on the screen?
home keys etc?
I doubt this phone can be completely bricked. Theres always a way to go back to stock.
Burner2K0 said:
I doubt this phone can be completely bricked. Theres always a way to go back to stock.
Click to expand...
Click to collapse
Oh if only that was true. Most bricks are soft ones tho.
nomadrider123 said:
Do you have any light on at all? anything on the screen?
home keys etc?
Click to expand...
Click to collapse
nothing at all, totally blank screen.
i can't even access download mode.
i did the same way as shifaat did, i unchecked the re-partition on Odin, when i clicked start.
any solution?
edit:
i try to take out the battery, plug the cable in while holding vol up+down, then reinsert the battery back. now i'm on download mode.
i have t959uvkb1.tar and 512.pit files, then i update these files with odin3 v1.7. and i got my vibrant going back to stock recovery.
it says:
- movi_check start..!!
checksum confirmation need_checksum[0]
not need checksum confirmation
-movi_check already executed!!
- movi_checking done!
update media, please wait
E: Can't mount /dev/block/st110
(invalid argument)
E: copy_dbdata_media: can't mount DBDATA:
i tried to format internal sd-card,
it says:
your storage not prepared yet, please use UI menu for format and reboot actions.
what should i do?
i can't install any rom from internal sd-card or external sd-card.
I was in same boat. Used same method to flash eugene. Successful, but now I can't dl apps (rom manager) bc it says 0% available space. Any ideas?
Sent from my MB525 using XDA Premium App
nick1665 said:
I was in same boat. Used same method to flash eugene. Successful, but now I can't dl apps (rom manager) bc it says 0% available space. Any ideas?
Sent from my MB525 using XDA Premium App
Click to expand...
Click to collapse
I'm having this exact same issue! I hope someone can lead us in the right direction..
If thats 5 people having all similar issues, I'd say flash something else until Eugene can get it fixed lol
Related
My vibrant won't even powerup, i was using odin3 v1.70 and i accidently put the wrong .tar file and it said failed! NOW IT WONT START UP.....help please =\
solved
dex1701 said:
I had this same thing happen after Odin froze during a flash of the stock Vibrant US firmware. I thought for sure it was dead...no battery charging icon when plugged in, couldn't boot into download mode, no signs of life at all...nothing I did made it do anything. After messing around for an hour and a half I figured out how to get it to boot into download mode:
1. Removed SD and SIM card
2. Removed battery
3. plugged the phone into USB
4. held down vol-up and vol-down
5. popped the battery back in while holding vol buttons
This got me into download mode consistently when my phone looked 100% dead. After that I unplugged it from the computer (still in download mode), fired up Odin, set up my flash files, and plugged it back into the computer. It then showed up in Odin and I was able to re-flash successfully.
Maybe it will work for you guys too. Don't put the SD card or SIM card back in until after you flash, though. I couldn't get mine to flash correctly with the cards installed.
Click to expand...
Click to collapse
this worked....mods please lock
thanks
Thanks for the info, I did Odin and the phone end up death too. I will this your method. I am hoping this will work.
this method didnt work.. my vibrant is dead.. help... its not doing anything..
magic4lyfe said:
this worked....mods please lock
Click to expand...
Click to collapse
u r a bad ass, thank you soooooooooo much, it just happened to me and now im on my way back to being fixed. thanks bro. ps by the way someone else said to the same thing basically but they said to press power as well, when i tried nothing...but without the power button pressed, worked...hell ya
Did not work at all... Accidentally I flashed my phone with a i9000 firmware tar file and now the phone is dead... can anyone tell me please how to save it? I don't have a phone at all
everyone just needs Download mode. access it whatever way you can same thing as recovery mode its just usually not that simple to get into using the multi-button methods. If all else fails to access download mode buy a team whiskey pre-made USB JIG. I havent purchased one but from the responses it seems like a good buy especially if you find yourself in a spot like most of you are in
mobileoneexpress said:
Did not work at all... Accidentally I flashed my phone with a i9000 firmware tar file and now the phone is dead... can anyone tell me please how to save it? I don't have a phone at all
Click to expand...
Click to collapse
Define dead do any lights come on at all? Like on the bottom of your phone? If so then it's not that bad. try using the toolbox.
http://forum.xda-developers.com/showthread.php?t=954509
There is a tutorial of every way to unbrick a vib in the Development section, that should help you out.
Help, when i was flashing with odin i accidentaly un plug the usb cable and now my phone doesnt even turn on, no lights, nothing, could anyone help me?
So I was using Odin to flash the stock ROM so I could flash to Nero v3...Had some trouble with Odin now this icon is all I can get the phone to show me. Attempts to get back into download mode haven't worked. I've done the Volume up + Volume - and Power button.
Did I brick my phone?
Did you have voodoo enabled when you flashed?
Unplug phone. Open odin. remove battery. Plug phone in. hold volume up/down keys. plug battery back in. should auto boot into download mode. I've seen that screen a few times and managed to go back to stock make sure its 512 pit jfd rom. Not ji6 513.
Sent from my SGH-T959 using XDA App
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
same issue somewhat....,.
Having trouble using ODIN!!
as now I did the steps and all I have is the phone will boot up through the tmobile screen & S after that screen goes black with the 4 hour button home row lit up.???
As for the recovery I get the following when booting it:
move_check Start..!!
checksum confirmation need_checksum(1300........)
mbr_checksum in header : 4:1
mbr checksum: 533a4003d.........
mbr checksum error
movingand checksum cofirmattion fail
movi_checking done!
update media, please
update media, finished
#manual mode #
appling muti csc
installin multi csc
Much help would be appreciated!!! Have to work all day today which will be slow, so I can work on fixing this. My main question is what type of file is pit & tar? Pit properties is coming up as a window shell comand, Tar opens with unknow app? Not sure if this is my problem or not, I get ODIN to run and complete the steps and end up with the above.
Using Odin V1.3
512.pit
t959UVJI6
bnielsen40 said:
That icon looks so familiar...
Do what boystuff said...exactly. Don't touch the power button at all. And for me, I had to also remove both the sim and sd card along with the battery.
So to recap: take all 3 out, connect the phone to the computer via usb cord, hold down both volume buttons, then while holding them down insert the battery. It'll kick you into download mode.
Sent from my Vibrant using XDA App
Click to expand...
Click to collapse
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
raziel26 said:
Hi I am having the same issues here and i did everything that you said and i am still seeing the same connect your phone to computer screen and i did have voodoo enabled before i was attempting to odin back to stock. is there anything i can do i really hope that this is not a $500 paperweight i have odin v3.10 and 512.pit also
Click to expand...
Click to collapse
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
icandy75 said:
Get back into download mode and flash Eugenes Froyo That Does Not Brick, that will wipe everything and fix your Voodoo issues. From there you should flash back to JFD then to anything you want.
Click to expand...
Click to collapse
thats the problem i cannot get into downloader mode
Have you tried the batt pull method? You could also try adb reboot download. If these do not work for you your will need a Jig to get her back to life.
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
raziel26 said:
the Adb method does not work because the pc will not recognize that there is a usb plugged in with the phone and what is the batt pull method and if a jig is something hardware rigging i am a complete idiot when it comes to that
Click to expand...
Click to collapse
Just pull the batt out. Plug usb to phone only first, hold down volume + and - and don't let go then plus in usb to your computer while still holding volume keys and put battery back in. That should work for you. A Jig is a rigged hardware piece that forces your phone to Dl mode.
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Sweet! that totally got me back into download mode...next question why am i getting stuck at file analysis?
bnielsen40, Boystuff, and Osuhsxr are totally right about the vol keys no crazy special soldering required.
osugsxr said:
where is the link for the eugene froyo files? Pda & Pit files needed please link.
To get into downloader mode this works everytime for me....
Start up ODIN, make sure phone is OFF (take out battery) plug back in
hold both the volume up/down (or more near center)....
While holding that plug in the USB connector,
this methods works all the time.
Im stuck in bootloops currently and do anything no responses yet.
Click to expand...
Click to collapse
Check your PM.
i was doing a odin flash back to T959UVJFD it failed. now it wont turn on. computer dosent find it push the buttens just died
davidtanis said:
i was doing a odin flash back to T959UVJFD it failed. now it wont turn on. computer dosent find it push the buttens just died
Click to expand...
Click to collapse
Pull the sd card, battery and sim card. push the power button a couple times. plug in usb cable. hold volume up+down then put the battery in. that should get you into download mode. you then can restore it with odin
didnt work, still no power, no picture, no vibration
How are you trying to get into download mode?
that happened to me too. i was using odin then the phone shutdown and nver turned back on. u might wanna call tmobile if you have insurance on your phone and tell them to send u a new one.
Sent from Samsung Vibrant w/ Nero v3 + Voodoo
rayvil30 said:
How are you trying to get into download mode?
Click to expand...
Click to collapse
just trying to get it to do something, and i dont have insurance though t-mobile
hern1989 said:
that happened to me too. i was using odin then the phone shutdown and nver turned back on. u might wanna call tmobile if you have insurance on your phone and tell them to send u a new one.
Sent from Samsung Vibrant w/ Nero v3 + Voodoo
Click to expand...
Click to collapse
You can't give up that quick. Come on man. Took me over 30 minutes one time to get in download mode. Tried different techniques. Try restarting your pc or maybe even a different odin version. Make sure odin is on before trying to get in downloade mode. Best way for me to get in d/l mode is to press both vol. up and down at the same time and then plug usb in. Other techniques are out their also.
rayvil30 said:
You can't give up that quick. Come on man. Took me over 30 minutes one time to get in download mode. Tried different techniques. Try restarting your pc or maybe even a different odin version. Make sure odin is on before trying to get in downloade mode. Best way for me to get in d/l mode is to press both vol. up and down at the same time and then plug usb in. Other techniques are out their also.
Click to expand...
Click to collapse
Not giving up, dont have a job so cant replace my phone if i want to. just not having any luck
You need to let us know which technique you are using to get into d/l mode so we can help you. Have you odined before?
xavenged said:
Pull the sd card, battery and sim card. push the power button a couple times. plug in usb cable. hold volume up+down then put the battery in. that should get you into download mode. you then can restore it with odin
Click to expand...
Click to collapse
I got in, restarted my pc and tryed this agian (9th time), thanks
rayvil30 said:
You need to let us know which technique you are using to get into d/l mode so we can help you. Have you odined before?
Click to expand...
Click to collapse
yes i had a behold 2
Thanks everyone for the help, my phone is working again!!!
Definitely the wrong section. Here's a couple tips/ideas though. The easiest way to manually get to Download mode it to:
1. Pop the battery, wait a sec, pop it back it.
2. May be easier to leave the battery cover off, we'll get back to this.
3. Make sure your computer is powered on, and the USB cord is plugged into the computer.
4. Without pressing the power button, hold down, volume up and volume down at the same time (this may be easier without the battery cover. This takes a firm grip sometimes, if this fails that's what you did wrong.
5. Still without pressing the power button, plug the other end of your USB cord into the phone. It should boot up into Download mode in a matter of seconds. If not, try again, you probably weren't holding the volume buttons properly.
Also, possible reason it stopped, did you put the .tar into PHONE instead of PDA? That will cause it to error midway like what you described. Otherwise I would definitely re-download/install your USB drivers with the one from this site, I find they work better. Also re-download the .tar .pit and even Odin for good measure. Check out the Vibrant Bible, that thread is your friend. Good luck, hope that helps!
EDIT: Guess I was too slow haha. Gratz man.
Best way is to use usb jig.
Sent from my CM NexSense using XDA App
davidtanis said:
I got in, restarted my pc and tryed this agian (9th time), thanks
Click to expand...
Click to collapse
no problem. i had the same exact thing happen to me a couple days ago. glad you're up and running again
Its not broken,research how to ODIN look for Eugene no brick files.
Nero v3 ///Mpower
Thread movement should commence soon I hope you get your phone working again if anyone can help it's the people here for sure
davidtanis said:
yes i had a behold 2
Click to expand...
Click to collapse
Ouch, Surprised you went Samsung again after getting screwed on that one.
Also, there's a Debricking thread stickied in the Vibrant General section you can try referring to next time!
davidtanis said:
just trying to get it to do something, and i dont have insurance though t-mobile
Click to expand...
Click to collapse
not sure if this is true but i read somewhere on xda that samsung will replace your phone up to three times if you really do brick your phone it will not turn on or load download mode or recovery.
In my experience..Vibrant is very close to unbrickable unless you smash hit...
I odined back to jfd even after flashing a captivate rom...
Sent from my SGH-T959 using XDA App
Hi, I am having a serious problem
My vibrant was working and i was flashing the firmware T959UVKA7 using odin 1.3
once the update was done and it odin said passed
the phone is not turning on at all, act like there is no battery
tried to plug it to wall charger not even responding, its like dead, no power at all
i even tried to remove the battery for 5 min, add it again and plugged the jig
nothing is happenning, tried every combination of keys, even connect it to computer usb with no battery then plugged the battery, nothing, the phone is completely dead
Please let me know if there is any way i can make it to work again? or i totally bricked it?
Sami
Did you try and get into download mode? Connect usb to computer. Hold both up down buttons then plug in usb
Sent from my SGH-T959 using XDA App
jrod33084 said:
Did you try and get into download mode? Connect usb to computer. Hold both up down buttons then plug in usb
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Thanks for the reply, well i tried all.. the problem is my phone isnt even turn on... its acts like there is no battery, even if i plug it to the wall charger it doesnt turn on or give me the battery status icon that is charging
its completely black screen, even the button light dont turn on, nothing turns on and the battery is fully charged
any idea? anyone know how i can fix it?? does that means i ruined my phone forever or is it fixable???
http://forum.xda-developers.com/showthread.php?t=848737 this will make it more clear
bartek25 said:
http://forum.xda-developers.com/showthread.php?t=848737 this will make it more clear
Click to expand...
Click to collapse
Yes read that
Sent from my SGH-T959 using XDA App
samiriad said:
Hi, I am having a serious problem
My vibrant was working and i was flashing the firmware T959UVKA7 using odin 1.3
once the update was done and it odin said passed
the phone is not turning on at all, act like there is no battery
tried to plug it to wall charger not even responding, its like dead, no power at all
i even tried to remove the battery for 5 min, add it again and plugged the jig
nothing is happenning, tried every combination of keys, even connect it to computer usb with no battery then plugged the battery, nothing, the phone is completely dead
Please let me know if there is any way i can make it to work again? or i totally bricked it?
Sami
Click to expand...
Click to collapse
Which firmware (kernel only or complete)? Link?
Which OS were you from before odin up the KA7?
I ran into similar problem. I was from Stock Froyo Kies, then odin over the supercurio stock+kernel KA7. It got black screen ...for a good 5-10 min. I was going to pull out battery but I heard some mumble jumble in the background telling me that it's converting (voodoo ext4) so I left it alone. If you pulled out too early during the conversion before it finish doing voodoo...I'm not sure what happened to that unless your odin KA7 does not have odin. Do you see any light, sound, or splash screen at all?
When you flash, did you have "repartition" checked or not?
Anyway, have you try the 2 button download mode? Mine was silent dead black screen too at one point from last few days with few variation difference caused by different tinkering mistakes. I just took off battery, sim, sd and kill odin. Reput them all back and fire up odin. Hold down both the + and - with 2 fingers, then hook in USB from pc to phone. It should put it to download mode and you can reodin whatever...depends what it can do.
same situation here.
i came from T959UVJFD then i flashed T959UVKA7 (.tar.md5 file from samfirmware.com) using odin3 v1.70
odin says it was finished. but it doesnt turn on anymore. i cannot even go to download mode.
PLEASE HELP!
any kind of button combo doest work
try downloading odin3v 1.85 and using this method to put in to download mode
1. pull the battery,
2. put it back in;
3. then, with the phone still off, plug your usb into the computer,
4. turn on odin3,
5. hold the center of the volume buttons,
6. plug the usb to the phone while holding the volume botton
orginally found in this my posting
http://forum.xda-developers.com/showthread.php?t=1471231
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
meascom said:
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
Click to expand...
Click to collapse
If your willing to wait the approx. week, call up Samsung tell them that you were updating through Kies and then your phone would no longer turn on, you've tried different batteries and tried different cables and still nothing, she/he will try to help you get into recovery mode, just go along with it, she will then help you get everything you need to send it to Samsung's nearest repair center. Sent mine in last thursday, they replaced the PBA (logic board) and are sending it now. Should be here in 2 days :]
meascom said:
I know I'm posting this on multiple threads, but Im desperate! I'm having the exact issue as OP, am hoping a suggestion from someone helps. Right now my hope is hanging on the comments from people here claiming "it is REALLY difficult to brick this phone".
I was "downgrading" from ICS Passion with GB bootloader, down to stock. The "downgrade" to 2.1 worked fine. Then I used Kies to upgrade to Froyo, and after the install it shutdown, and now the phone doesn't respond to any key. Tried a different battery as well, to eliminate a probably battery issue. No good.
Tried different combos to get to recover/download modes: Vol UP + Power, Vol Down + Power, Vol Up+Vol Down+Power, and Insert Cable+ Vol UP+Vol Down - nothing yet. Used ODIN 1.85 with suggestion from canyon789, and that didn't work either.
Any ideas? Please help.
Click to expand...
Click to collapse
Did you try the exact no-boot steps from the Guide linked to above?
I tried everything else, only the exact sequence worked.
Battery out, phone plugged in, Odin running: press center of volume keys,
insert battery.
cashmundy said:
Did you try the exact no-boot steps from the Guide linked to above?
I tried everything else, only the exact sequence worked.
Battery out, phone plugged in, Odin running: press center of volume keys,
insert battery.
Click to expand...
Click to collapse
Yes tried the exact same steps, no luck. Ordered a jig finally and hoping that will get me out of this mess
I hope the jig works for you. So much for "unbrickable". I will be sure never to Odin anything but the JFD file. Good luck.
work perfect for me thanks
meascom said:
Yes tried the exact same steps, no luck. Ordered a jig finally and hoping that will get me out of this mess
Click to expand...
Click to collapse
his is not going to help at all, you damage the bootloader you as happened to me, but in my case it did ODIN, Mini Kies did.
The only thing you can try and see if you have some success is to do two things:
* Easy way: pay for you to get a JTAG on the phone and reinstall the bootloader. (Actually that's what you Damage to flash it)
* Terse: Vibrant Unbrickable do MOD
(but must be done by someone who is skilled in welding and electronics, as this takes a lot of risk, as is jumping two pins that control the processor of the phone)
note that the device is already damaged, you try to repair it, if you do not succeed, At Vibrant Ebay sell broken, win one for 53.66 at auction. and attempting to repair Give you a MOD.
I hope you will help.
If Mini Kies damaged your phone, call Samsung, tell them that you upgraded with Mini Kies and now it won't turn on and they replace it for free.
xXcybersniperXx said:
If Mini Kies damaged your phone, call Samsung, tell them that you upgraded with Mini Kies and now it won't turn on and they replace it for free.
Click to expand...
Click to collapse
This can be another solution, if you carry LUCK and Warranty!!!!!
Help Miui Rom was runnning perfectly and then I charged my battery and the phone powered back on. But all of my apps were blank and my sd was corrupted and nothing was being read from the sd. So i flashed stock 2.2 by Eugene and the sd card wont mount and I'm getting a error
"E:Can't mount /dev/block/mmcblk0p1 (or /dev/bloc
k/mmcblk0)
(I/O error)
E:copy_dbdata_media:Can't mount SDCARD:
copy default media content failed."
Does anybody know what to do, Stock works but i still cannot use my sd card. This has happened before and I have done the with the Eugene froyo that does not brick as stated above.
if all else fails, odin/heimdall back to stock.
http://forum.xda-developers.com/showthread.php?t=1047087
Yeah this is the one i've used. It just keeps rebooting into the recovery 2e with the error code I put in the post above.
I appreciate the help though.
Try reformatting your SD card.
Sent from my SGH-T959 using XDA Premium App
TheSneakerWhore said:
Try reformatting your SD card.
Sent from my SGH-T959 using XDA Premium App
Click to expand...
Click to collapse
Just tried it did not work, I think it reformatted it but then after a reboot(it would not unmount) it still did not work. I think I'm screwed. The crazy part is this has happened before but I just don't know what I did the first time. I even looked up my google web history lol.
Odin to JFD. That's happened to me with some 2.2 packages.
power off phone
pull out battery
GRAB THIS STUFF : http://tinyurl.com/3l6seac
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
movieaddict said:
power off phone
pull out battery
GRAB THIS STUFF : http://tinyurl.com/3l6seac
turn on odin
attach phone to pc with usb cable
now while holding down both volume buttons put battery back in.
now you should be in download mode and go back to stock with odin from here!
make sure u put the proper .pit and .pda file in there proper places on odin and ur set to go.
Enjoy and also make sure u have the proper samsung drivers
Click to expand...
Click to collapse
I have tried this 3 times over before you even suggested it and I still get the black screen with the 4 buttons highlighted. Any suggestions for this, the sd card was perfect with the formatting and everything while booting up. It just hits the black screen right after the Galaxy S sign.
P.S. that link had me laughing so hard.
if that doesnt work, try a usb jig or aio toolbox!
movieaddict said:
if that doesnt work, try a usb jig or aio toolbox!
Click to expand...
Click to collapse
Ok, I'm downloading aio toolbox now, I really hopes this works, I Love my vibrant.
Update:
Same thig happens after Reboot, h screengoes blank and th 4 buttons are highlighted.